19-Specification 9.pdf

P a g e 1 | 4

Ford F350 Medium Truck 4WD Mini Dump Body

PCN: 168429

Specifications:

- Classification: 3 Medium Truck (GVWR 10,001-14,000 lbs.)

- Vinyl interior 40/20/40 split front bench

- 4x4 with auto locking hubs and manual override

- 6.2L flex fuel V8 engine or equivalent

- Automatic transmission

- Extended cab

- Power windows/locks/mirrors/remote keyless entry

- Electronic speed control and tilt steering

- 12V power outlet on dash (includes factory standard outlet(s)

- Daytime running lamps

- Adjustable mirrors

- Backup camera

- Class V receiver hitch with camper style harness, draw bar w/2-5/16” ball, pintle style, pin, clip

- High-capacity tow hitch

- Dealer installed electric brake controller

- Dealer installed back up alarm

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- Wrap around grille guard with winch mount

- Warn 15,000 lb. winch with remote

- 6” angular black molded-in-color running boards

- Tailgate Step

- All terrain tires with Kevlar, includes mount and balance for dual wheel vehicle

Dump body:

- 9’ flat bed with stake sides and dump capability o (Includes FHSMV Required Chassis Certification)

- Hoist mechanism for dump action

- Upgrade rear stakes to include hinges & minor reinforcement allowing rear stakes to swing

(continued next page)

Specification 9

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN

USING RED CIRCLES IN ATTACHED BELOW PICTURES.

Pictures for strobes are for reference use only

P a g e 4 | 4

Pictures for strobes are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN

OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.