12-Specification 19.pdf

P a g e 1 | 4

Ford F150 Light Truck 2WD Regular Cab PCNs: ADD25B.26, ADD25B.27, & ADD25B.28

Specifications:

- Classification: 2A Light Truck o (GVWR 6,001-8,500 lbs.)

- Regular cab

- Standard bed (6.5’ fleet side)

- Exterior Color - oxford white or equivalent

- Interior Color - Black Medium Dark Slate (or equivalent)

- Interior vinyl

- 40/20/40 front seat

- 6-cylinder gasoline engine (3.5 L or equivalent)

- Automatic transmission

- 4x2

- Trailer tow pkg with trans oil cooler, class IV receiver, smart trailer tow connector, 4/7 pin harness, engine oil cooler, front stabilizer bar

- Integrated trailer brake controller

- Rear sensing system/back up camera

- Exterior back up alarm

- Deep tint film on all side and rear windows (4 doors and back)

- Spray-in bedliner

- LT245/70R17E BSW A/T tires

- Wheels: 17” silver steel (STD)

- Manual-folding, power glass sideview mirrors with black skull caps, illuminated entry, MYKEY owner controls feature, perimeter alarm, power locks with flip key and integrated key transmitter, keyless-entry (including auto lock), power tailgate lock, power windows

Required Upfit:

- Havis premium passenger side mounted computer mount stand

- Universal laptop mount & SS-UT-X screen stiffener

- High side mount truck box (bilateral)

- Pure sine wave power inverter 600W for powering laptops and inkjet printers (inverter to be installed under passenger seat)

- 4 corner LED lights

Specification 19

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN

USING RED CIRCLES IN ATTACHED PICTURES.

Pictures are for reference use only

P a g e 4 | 4

Pictures are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT

IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF

DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE

UNIT IS IN OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.