20-Specification 11.pdf
PDF 926 KB Posted
- Solicitation number
- ITB-26-00040
- Issued by
- Hillsborough County, Florida
About this file
This document is a vehicle specification for Hillsborough County Fleet Management detailing the procurement of Ford F150 Light Trucks. The specification covers the acquisition of multiple Ford F150 trucks (PCN: 158755, 169630, 164843, & 160927) with specific requirements including an extended cab, standard 6.5' style bed, 8-cylinder engine, automatic transmission, 4x4 drivetrain, and vinyl 40/20/40 front seats. The trucks are specified to be Oxford White exterior with a Black Medium Dark Slate interior, featuring deep tint film on all windows. Required upfits include a remote power distribution point and Whelen Vertex 4 corner LED lights, with detailed installation instructions.
The dealer is responsible for providing title, county tag, and registration, including temporary tags and two-way overnight shipping of documentation. Hillsborough County Fleet Management requires the dealer to arrange offload capabilities and provide minimum quarterly updates on the build/order status. The specification mandates specific installation guidelines for the power distribution point and LED lights, including precise wiring instructions, fuse protection, and mounting requirements. The dealer must not utilize original equipment manufacturer (OEM) wiring for add-ons and must follow general practices covered under OEM guidelines.
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P a g e 1 | 4
Ford F150 Light Truck
PCN: 158755, 169630, 164843, & 160927
Specifications:
- Classification: 2A Light Truck o (GVWR 6,001-8,500 lbs.)
- Extended cab
- Standard bed (6.5’ Style side)
- 8-cylinder engine
- Automatic transmission
- 4x4
- Vinyl 40/20/40 front seat
- Exterior Color: Oxford White (or equivalent)
- Interior Color: Black Medium Dark Slate (or equivalent)
- Deep tint film on all sides and rear windows
Required Upfit:
- Remote power distribution point (see below for details)
- Whelen Vertex 4 corner LED lights (see below for details)
(continued next page)
Specification 11
P a g e 2 | 4
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY
ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY
UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE
OF, OR EQUIVALENT TO BELOW DIAGRAM.
P a g e 3 | 4
4 Corner LED Requirements
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN
USING RED CIRCLES IN ATTACHED PICTURES.
Pictures are for reference use only
P a g e 4 | 4
Pictures are for reference use only
ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS’ GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN OPERATION. THE
COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.
File details come from the government source that posted it. Updated .