15-Specification 15.pdf

P a g e 1 | 4

Ford F250 Truck 4WD Regular Cab 8' Box

PCN: 164289

Specifications:

- Classification: 2b Light/Medium Truck o (GVWR 8,501-10,000 lbs.)

- Regular cab

- Long bed

- 6.2 L Flex-fuel V8 or equivalent

- 6-speed automatic transmission

- Power windows, locks, remote keyless, power glass mirrors with manual telescoping feature

- Daytime running lights

- 4x4 with auto locking hubs and manual override

- HD trailer tow package with draw bar, 2-5/16” ball, pin, and clip

- LT245/75RX17E BSW All terrain tires

- Electric brake controller

- Vinyl interior 40/20/40 split bench seat

- 3rd key and remote

- Back up alarm

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- Spray on bedliner including tail gate

- Running boards

- Wrap around Brush guard with winch mount plate

- 10,000 lb. winch with remote

- Tool box

- Light bar

- Whelen vertex 4 corner LED light kit

- New County Tag (includes temp tag and 2-way overnight shipping for signature)

- Florida legal deep tinted film side and rear glass

(continued next page)

Specification 15

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN

USING RED CIRCLES IN ATTACHED PICTURES.

Pictures are for reference use only

P a g e 4 | 4

Pictures are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN

OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.