18-Specification 7.pdf

PDF 1 MB Posted

Attached to
Multiple Ford Sport Utility Vehicles (SUV’s) and Light Medium Trucks
Solicitation number
ITB-26-00040
Issued by
Hillsborough County, Florida

About this file

This document is a vehicle specification for Hillsborough County Fleet Management detailing the procurement of a Ford F150 Light Truck with specific requirements. The specification outlines a 4WD Extended Cab Standard Bed truck with a standard gas engine, part-time four-wheel drive, offroad/all-terrain tires, and various standard features including power windows, keyless entry, and a trailer tow package. Required upfit modifications include a front brush guard with winch mount and a 12,000 lb capable winch. The vehicle must be Oxford White exterior with a Black Medium Dark Slate interior.

Additional requirements mandate that the dealer provide title, county tag, and registration, including a temporary tag and two-way overnight shipping of documentation. The dealer must provide quarterly updates on the build/order status and comply with specific wiring and installation guidelines. The specification also requires the installation of four white LED directional lights (one in each corner of the front grille and rear bumper) controlled by a toggle switch mounted on the dashboard. The lights must be installed according to manufacturer guidelines, with all wiring secured to prevent chafing or snagging, and the entire circuit must be fuse-protected.

View the file

Other files

Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

P a g e 1 | 4

Ford F150 Light Truck 4WD Extended Cab Standard Bed

PCN: 157873

Specifications:

- Standard gas engine

- Standard transmission

- Part-time four-wheel drive

- Standard axle ratio

- Offroad / All-terrain tires

- Front 40-20-40 Vinyl split bench seat

- Power windows

- Power door locks

- Keyless entry & Illuminated entry

- Manual folding power glass sideview mirrors

- Reverse Sensing

- Backup Alarm

- Standard AM/FM radio with wireless phone connectivity (Bluetooth capable)

- Spray-In bedliner

- Class IV Trailer hitch receiver & Trailer Tow Package (includes harness with 7-pin-to-4-pin adapter)

- Exterior Color: Oxford White (or equivalent)

- Interior Color: Black Medium Dark Slate (or equivalent)

- Deep tint film on all sides and rear windows

Required Upfit:

- Front brush guard with winch mount

- 12,000 lb capable Winch

(continued next page)

Specification 7

P a g e 2 | 4

THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY

ASSOCIATED FEES

IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.

THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY

UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.

DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE

OF, OR EQUIVALENT TO BELOW DIAGRAM.

P a g e 3 | 4

4 Corner LED Requirements

4 Corner LED Lights / Formerly Called Strobes (VENDOR):

INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN

USING RED CIRCLES IN ATTACHED BELOW PICTURES.

Pictures for strobes are for reference use only

P a g e 4 | 4

Pictures for strobes are for reference use only

ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN

OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.

File details come from the government source that posted it. Updated .