17-Specification 13.pdf
PDF 883 KB Posted
- Solicitation number
- ITB-26-00040
- Issued by
- Hillsborough County, Florida
About this file
This document is a vehicle specification for Hillsborough County Fleet Management, detailing requirements for a Ford Explorer Midsize SUV 2WD (PCN: 16845). The specification outlines a vehicle with a 6-cylinder flex fuel 3.5L Cyclone engine, automatic transmission, 2WD drivetrain, Oxford White exterior, and Black Medium Dark Slate interior. The vehicle requires specific upfits, including a remote power distribution point and Whelen Vertex 4 corner LED lights.
The dealer is responsible for providing title, county tag, registration, and all associated documentation, including two-way overnight shipping. Additional requirements include quarterly build/order status updates, adherence to OEM wiring practices, and specific installation guidelines for the remote power distribution point and LED lights. The LED lights must be white, installed at each corner of the front grille and rear bumper, and controlled by a toggle switch mounted on the dashboard. All wiring must be secured to prevent chafing or snagging, and the circuit must be fuse-protected.
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P a g e 1 | 4
Ford Explorer Midsize SUV 2WD
PCN: 16845
Specifications:
- 6-cylinder flex fuel engine, 3.5 L Cyclone or equivalent
- Automatic transmission
- 2WD
- Exterior Color: Oxford White (or equivalent)
- Interior Color: Black Medium Dark Slate (or equivalent)
- Deep tint film on all sides and rear windows
Required Upfit:
- Remote power distribution point (see below for details)
- Whelen Vertex 4 corner LED lights (see below for details)
(continued next page)
Specification 13
P a g e 2 | 4
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL DOCUMENTATION AND ANY
ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM QUARTERLY
UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD‐ONS DEALER MUST ABIDE BY GENERAL PRACTICES COVERED UNDER OEM. *REMOTE POWER DISTRIBUTION POINT SHALL BE INSTALLED AND BE
OF, OR EQUIVALENT TO BELOW DIAGRAM.
P a g e 3 | 4
4 Corner LED Requirements
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
INSTALL LED DIRECTIONAL LIGHT (4 EA) - THE COLOR OF ALL 4 LEDs SHALL BE WHITE. ONE LED IS TO BE INSTALLED IN EACH CORNER OF THE UNIT’S FRONT GRILLE AND REAR BUMPER SECTIONS AS SHOWN
USING RED CIRCLES IN ATTACHED PICTURES.
Pictures are for reference use only
P a g e 4 | 4
Pictures are for reference use only
ALL 4 BULBS SHALL BE MOUNTED AND WIRED ACCORDING TO MANUFACTURERS’ GUIDELINES AND BE CONTROLLED BY ONE TOGGLE SWITCH WHERE LEDs CAN BE ACTIVATED/DEACTIVATED WITHOUT IGNITION BEING ON. TOGGLE SWITCH SHALL BE MOUNTED IN CENTER BOTTOM PORTION OF DASHBOARD TO PREVENT ACCIDENTAL ACTIVATION. ALL WIRING SHALL BE SECURED IN A FASHION THAT PREVENTS CHAFFING, SHORTING OF CIRCUIT, AND BECOMING SNAGGED ON ANY DEBRIS WHILE UNIT IS IN
OPERATION. THE COMPLETE CIRCUIT SHALL BE FUSE PROTECTED.
File details come from the government source that posted it. Updated .