1305M226Q0061- Invitation to submit SF330s CLEAN.docx

Synopsis for Architect Engineer (A&E) Indefinite Delivery/ Indefinite Quantity (IDIQ) Contracts for Naval Architecture and Marine Engineering Support for the National Oceanic and Atmospheric Administration (NOAA) Office of Marine and Aviation Operations (OMAO) General Information

NOAA, Eastern Acquisition Division, Norfolk, VA, on behalf of OMAO, is seeking small business firms that are highly qualified to provide services of Architect-Engineer (A-E) Naval Architecture and Marine Engineering in support of the various vessels assigned to OMAO.

This Architect-Engineer Indefinite Delivery- Indefinite Quantify Contract (IDIQ) is being procured in accordance with the Brooks A-E Act as implemented in Revolutionary FAR Overhaul (RFO) Subpart 36.102. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The Government anticipates awarding multiple IDIQ contracts. Each contract will have a sixty (60) month ordering period. The maximum total dollar amount to be awarded and shared among all contracts shall not exceed $9.99 million. Should it be in the Government’s interest to award a single IDIQ contract in lieu of multiple contracts, the single contract will have a sixty (60) month ordering period with a maximum value of $9.99 million. The contracts shall each have a minimum contract guarantee amount of $5,000.00.

Each task order will have a scope of work that will describe the specific project requirements and the length of its performance period. The performance period of individual task orders may vary based on the level of effort required by the scope of work. Task orders will be issued on a firm fixed-price basis. The primary work site will be at the contractor’s facility; however, performance may be required at the Marine Operations Center offices and aboard NOAA ships and boats in U.S. ports, at sea, and at sites throughout the world. Task orders will be awarded in accordance with RFO 16.507-2 Architect-Engineer Services and the terms of the contract.

This acquisition is 100% set-aside for small business concerns. The applicable North American Industry Classification System (NAICS) Code is 541330 (Exception 3), Engineering Services, specifically Marine Engineering and Naval Architecture, with an applicable size standard of $47 million. RFO clause 52.219-14 entitled “LIMITATIONS ON SUBCONTRACTING” is applicable to this acquisition.

In accordance with RFO 36.202-3(d), the A-E firm must be a registered/licensed engineering firm to be eligible for award. Firms must provide proof that it is permitted by law to practice the professions of engineering, (e.g., state registration number, or a brief explanation of the firm’s licensing in jurisdictions that do not register firms, etc.). Failure to submit the required proof could result in a firm’s elimination from consideration.

The current ships in operation within the NOAA fleet are identified in the NOAA Marine Operations web site https://www.omao.noaa.gov/. These ships include oceanographic, fisheries, and living marine resource research vessels as well as hydrographic survey vessels of various sizes (815 – 3,250 long tons of displacement). The small craft consist of small boats and launches operated in support of oceanographic, hydrographic, or fisheries research projects. Also included are rigid hull inflatable boats (RHIB) or aluminum hull boats that may be carried on board NOAA ships or involved in near coastal research work. These small craft vary in size up to 50 feet (15.24 meters) in length. The type, make, and configuration of the vessel will vary depending upon its intended purpose.

SCOPE: Tasks may involve single or multiple disciplines, and will include a variety of assignments including, but not limited to:

1. Conduct requirements, feasibility, conceptual, and preliminary design studies to develop engineering specifications and drawings for the design, construction, repair, maintenance, and alteration of ships, small crafts, and related support systems.

2. Conduct design studies to develop procurement specifications and associated drawings, cost estimates, and Government Furnished Equipment (GFE) procurement specifications for the construction, repair, and alteration of ships, small crafts, and related support systems.

3. Conduct detail design studies on all types of ship systems to develop engineering specifications, drawings, cost estimates, schedules, labor estimates, and material estimates for the construction, repair, and alteration of ships, small crafts, and related support systems.

4. Conduct ship system analyses such as stability tests, prototype installations, predictive and preventative maintenance analyses, engineering inspections and tests, weight and moment analyses, trim and stability analyses, and prepare weight reports and ship trim and stability booklets.

5. Conduct fleet support studies, economic analyses, and operation research analyses for fleet maintenance, operation, modernization, alteration, and logistic support.

6. Provide deliverable materials such as computer-aided design (CAD), drafting and engineering products, drawings, calculations, reports, and graphics. The Contractor shall have all of the required applications software required by the tasks and the related information system hardware as required to support Naval Architectural and Marine Engineering design requirements. All CAD deliverables shall be submitted as AutoCAD (Autodesk AutoCad Version 2019 or later, .DWG format) documents. All CAD deliverables shall be submitted as attachments to E-mail messages or via secure file sharing platform and full or half-sized hard copies as required by the tasks. All trim and stability related work should employ the use of Cargo Max software (by Herbert-ABS). Large format drawing scanning and printing capability shall be readily available to support the contract requirements.

Calculations, detailed specifications, and reports shall be submitted in electronic versions as email attachments or via secure file sharing platform in Microsoft Word (2019 version or later).

SELECTION CRITERIA AND SUBMITTAL REQUIREMENTS

Submit your qualifications on GSA Standard Form (SF) 330 (“ARCHITECT-ENGINEER QUALIFICATIONS”, OMB No. 9000-0157) and follow its instructions except as modified below. ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT THE SF330 IS CONTAINED HEREIN. THERE IS NO SEPARATE RFP PACKAGE TO DOWNLOAD.

SUBMISSION CRITERIA: Selection Each potential contractor will be evaluated in terms of its:

1. Specialized Experience and Technical Competence (SF330, Section F)

2. Professional Qualifications (SF330, Section E)

3. Past Performance (SF330, Section H)

4. Capacity (SF330, Section H)

5. Quality Control Program (SF330, Section H) CRITERION 1 - SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: Demonstrate specialized experience and technical competence in at least one of the technical specialties below. This list is provided for reference and does not exclude other areas of experience or competence, which may be presented as pertinent to this requirement.

1) Hull Systems

2) Ship Control Systems

3) Mission Support Systems

4) Deck Machinery Systems

5) Propulsion and Control Systems

6) Auxiliary Systems

7) Electrical Systems

8) Berthing, Messing, and Habitability Systems

9) Ship Support Systems

CRITERION 2 - PROFESSIONAL QUALIFICATIONS: Provide professional qualifications and capabilities of the staff to be assigned to this contract (grouped by firm, with personnel of the prime contractor first). Identify which of the prime contractor employees are key personnel who will have major contract responsibilities and/or provide unusual or unique expertise. An individual identified as key personnel shall be an employee of the prime contractor. Qualifications of staff will be considered if the individuals are permanent employees of the prime contractor or if the prime contractor clearly demonstrates that it has teaming and subcontracting arrangements in place which gives the prime contractor management authority over these individuals. Minimum qualifications of key personnel and other staff are provided in Attachment 1.

Include recent experience in performing tasks relevant to the list in Criterion 1.

The Program Manager or Senior Technical Manager shall be a registered professional engineer.

Submit resumes for key personnel in Section E of the SF330. Resumes should cite project specific experience and the individual’s proposed role in the proposed contract. Include each proposed key person who will participate significantly in the work required for this contract. Each resume shall include projects that best illustrate the individual’s qualifications and experience relevant to the requirements of this contract. Provide resumes only for those key personnel who will actually perform work under the proposed contract. Key personnel identified under this criterion should also be shown with their roles on the Organizational Chart provided under Section D of the SF330. Identify the state and discipline of actively licensed professional engineers. Identify personnel with specialty certifications and the credentialing bodies that granted them.

CRITERION 3 - PAST PERFORMANCE: The Government will evaluate past performance using the projects listed by the firm in Section F of the SF330. The evaluation will consider the team’s past performance on relevant contracts with government and/or commercial projects in terms of cost control, quality of work, and compliance with performance schedules. Points of contact provided in the SF330 may be contacted. The prime contractor and its proposed team/subcontractors will be evaluated based on past performance assessments and other available information regarding past performance. Where there is no record of past performance, the firm will be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation.

In Section H of the SF330, submit an A-E Contractor Appraisal Support System (ACASS) or Contractor Performance Assessment Report System (CPARS) evaluation for each project listed under Criterion 3. If a completed ACASS/CPARS evaluation is available, it shall be submitted with the completed SF330 package. If an ACASS/CPARS evaluation is not available, firms shall request representatives of the projects to complete the attached Past Performance Questionnaire and submit it to the Contract Specialist. Submitted ACASS/CPARS evaluations will not be counted as part of the page limitation and shall be attached to the SF330, behind the SF330 Part II document.

For projects provided in support of past performance in Section F of SF330, list and provide copies of any applicable performance awards received (not counted in the 40 page limitation for SF330, Part I). Clearly indicate to which Section F project the award relates; otherwise the information may not be considered.

CRITERION 4 – CAPACITY: The evaluation will consider the firm’s capacity to accomplish the work in the required time. Firms will be evaluated based on projected workload and staffing, and ability to meet the requirements of RFO 52.219-14, LIMITATIONS ON SUBCONTRACTING. Firms must demonstrate capacity to work on multiple projects in dispersed locations. Individual projects will be described at the task order level and capacity will be evaluated at the task order level as well.

On form SF330, Section H, indicate the firm’s present and projected workload (including project type, dollar amount, and complexity), percent of previous projects completed on time within the last three years, staffing plan (including location of staff), and the availability of the proposed team for this contract performance period. Provide any additional information pertinent to the firm’s capacity to meet the RFO 52.219-14 requirement that at least 50% of the cost of contract performance incurred for personnel shall be expended for employees of the prime contractor. Demonstrate capacity to accomplish multiple task orders simultaneously with overlapping delivery dates.

CRITERION 5 – QUALITY CONTROL PROGRAM: The evaluation will consider the firm’s corporate quality control program, processes and procedures, and assigned authorities for the Quality Control (QC) program to ensure technical accuracy of the A-E work product and effective cross-coordination among firms.

For firms teaming with offices in a variety of locations, describe how the QC effort will be implemented across the various team offices. Describe from which office the QC program will be managed/coordinated and the plan/methods to ensure effective QC and communication between offices. Firms that demonstrate a QC process that will minimize the Government’s quality assurance (QA) effort in reviewing the A-E’s work product may be considered more favorably in the evaluation. Submittal of broad or generic quality control manual is not acceptable.

Provide a description of the steps the project team will use for each of the tasks under the proposed contract that relate to: (1) Management of workload, coordination between team members, and assignment of tasks to appropriate personnel across all disciplines; (2) Use of appropriate technical methodology, technical and regulatory accuracy, consistency between resource topics in a single document; (3) Illustrate successes in ensuring quality and identify any commendations or evaluations regarding QC; (4) In addition to technical document preparation, discuss how the project team proposes to provide quality service in terms of understanding government client objectives, following government-provided document forms and templates, providing timely responses to Government requests, and reducing government time and effort required to manage the contract; (5) Of special interest are the quality control processes for checking documents in place that minimize the Government’s need to perform quality assurance reviews of the A-E’s work product for errors, omissions, and quality across all disciplines.

EVALUATION: Criterion 1 and 2 are of equal importance to each other and when combined are more important than criterion 3, 4, and 5 which are listed in descending order of importance. SF330s will be evaluated to determine the most high qualified firm(s) based on the responses to the submission criteria described herein.

SUBMITTAL REQUIREMENTS: Qualified firms are invited to submit a completed SF330. Documents shall be annotated with identification number 1305M225Q0029. The SF330, Part I, is limited to forty (40) single-sided 8-1/2 inch x 11 inch pages. A page refers to one printed side of a piece of paper (e.g., 20 pieces of paper printed on both sides equates to 40 total pages). The only exception is the Organization Chart that may be an 11 inch X 17 inch page, with half inch margins and one-sided. The SF330 shall include a completed Part II for each team member and branch office identified in Part I. There is no page limit for Part II. Submit Minimum font size is 10 point for Parts I and II, excluding any pre-formatted font in SF330 forms. Margins will be ½ inch on non-SF330 pages.

Firms shall fully complete Part I, Sections A through C of the SF330. In Section B, block 5, firms shall provide their Unique Entity ID (UEI) number in addition to the name of the firm. Under Part 1, Section D, in addition to the instructions provided for the SF330, provide an organizational chart that identifies the overall relationship and lines of authority of the proposed team. Non-key personnel may also be shown on the organizational chart. The organizational chart will not be counted as part of the page limit for Part I, but it must be affixed to the submittal to prevent separation in handling.

Firms that elect to propose as a joint venture (JV) or Limited Liability Company (LLC) (as a separate legal entity) shall submit their legally binding formal JV or LLC agreement(s) along with their Standard Form (SF) 330. All such agreements shall be signed by the parties and shall demonstrate the relations between firms and identify contractual relationships and authorities to bind them. The JV or LLC shall also be registered in the System for Award Management at https://www.sam.gov at the time of SF330 submission. The legal documentation verifying the JV or LLC will not be considered part of the page limit for SF330 submission. Joint Venture agreements shall be submitted in Section H, Additional Information of the SF330. Section I shall be signed and dated by the Offeror’s Authorized Representative.

Additional Information: THIS IS NOT A REQUEST FOR PROPOSAL – DO NOT SUBMIT PRICE PROPOSALS AT THE TIME OF SF330 SUBMISSION. All information must be included in the SF330 package. Cover letters, excess number of pages and attachments other than those prescribed herein will be excluded from the evaluation process.

In accordance with Selection of Architects and Engineers, 40 U.S.C. Chapter 11 (previously known as the Brooks Act), the firm must be a registered/licensed architectural and/or engineering firm and shall submit proof of this with the submission of the SF330. Specifically, section 901(1) of Selection of Architects and Engineers, 40 U.S.C. Chapter 11 requires that a firm be a legal entity permitted by law to practice the professions of architecture and engineering. In states where firms are required to be registered under state law, firms shall submit that information. Should the A-E be permitted by law to practice the professions of architecture and engineering in more states within the geographic region covered by the proposed contract, firms shall submit that information. In states where a firm is not required to be registered under state law, the name of the registered architect or engineer with their state registration number and business license is acceptable. Firms must submit proof with the SF330 that they have filed the Organizational Record Form for their principal office(s).

All firms are advised that registration in the System for Award Management (SAM) database is required prior to award of a contract. Failure to register in the SAM database may render a firm ineligible for award. SAM is a Federal Government owned and operated free website that consolidates the capabilities of CCR (Central Contractor Registration), ORCA (Online Representations and Certifications Application), and EPLS (Excluded Parties List System). It is the primary Government repository for current and prospective federal awarded information. Firms shall ensure you complete your SAM registration for the same name and address identified as the submitting office on your SF330, with its associated CAGE code, UEI. Registration instructions and information can be accessed from the SAM home page at https://www.sam.gov.

SUBMISSION REQUIREMENTS: Firms having capabilities to perform this work and desiring to be considered shall submit one electronic package, consisting of one completed SF-330 (latest edition) submission for the project to Elizabeth Eichelberger at elizabeth.eichelberger@noaa.gov and Andrew Northcutt at andrew.northcutt@noaa.gov.

SF330 Responses are due no later than 3:00 p.m., Eastern, July 21, 2026; however, interested/qualified firms need not wait until then to submit. Submittals received after this date and time will be processed in accordance with RFO 15.107.

It is the firm’s responsibility to check the SAM website at www.sam.gov for revisions to this announcement or other notices. Inquiries regarding this notice shall be submitted in writing no later than seven (7) business days prior to the response date to Elizabeth Eichelberger, Contract Specialist, at elizabeth.eichelberger@noaa.gov and simultaneously to Andrew Northcutt, Contracting Officer, at andrew.northcutt@noaa.gov.

image1.png