Remove and Install 1 New Natural Gas Oven at FCC Lompoc, CA
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 15B61723Q00000016-1 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 333994 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-05-18 16:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Lompoc, CA 93436The DOJ BOP Field Offices- FCC LOMPOC requires the following items, Brand Name or Equal, to the following: LI 001: Provide all necessary equipment, labor, materials, and incidentals to replace 1 stainless-steel oven located at FCC Lompoc. The contractor is responsible to remove and install 1 new oven in place of the current one in accordance with the attached Statement of Work.
BAXTER OVEN MODEL#OV500G2-EE or approved equivalent.
DELIVERY & INSTALL ADDRESS:
FCC Lompoc
3901 Klein Blvd.
Lompoc, CA, 93436, 1, JB;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, DOJ BOP Field Offices- FCC LOMPOC intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOJ BOP Field Offices- FCC LOMPOC is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.As defined in the Federal Acquisition Regulation (FAR) 2.101, the terms "offer" and "offeror" refer to a response to a solicitation that, if accepted, would bind the submitter to perform the resultant contract. The terms "bid" and "bidder" refer to an offer submitted in response to an Invitation for Bid (IFB). The term "proposal" refers to an offer submitted in response to a Request for Proposal (RFP). The terms "quotation," "quote," and "quoter" refer to a non-binding submission in response to a Request for Quotation (RFQ) which is not an offer.Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid/Proposal/Quotation individual pricing for all required line items in order to be considered for award (i.e., Do not use the “Included in another line item” function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ‘Submit a Question’ feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid/Proposal/Quotation being determined to be unacceptable.New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.Bid/Offer MUST be good for 60 calendar days after close of Buy, unless otherwise indicated.Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov.No partial shipments are permitted unless specifically authorized at the time of award.Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable).The Contracting Officer will indicate elsewhere in this Buy as to whether responses will be evaluated for award based either upon (a) price and pricing factors only (Bids/Quotes) or (b) price and other factors (Proposals/Quotes). All Bids/Proposals/Quotations must conform to the listed specifications or the Statement of Work. If award criteria are based upon (b) price and other factors, the Contracting Officer shall clearly indicate the criteria to be applied elsewhere in this Buy.In addition to providing pricing at www.FedBid.com for this solicitation, each Bidder/Offeror/Quoter must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this Buy. Submissions can be sent to clientservices@fedbid.com.For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The Bidder/Offeror/Quoter may not substitute any item/service listed on this order without prior written approval from the BOP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this Buy. Items/services that do not conform to descriptions and part numbers found in this Buy will be rejected at the time of delivery causing a return at the contractor's expense.For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may result in non-consideration of the Bid/Proposal/Quotation. This information is REQUIRED in order for a seller's Bid/Proposal/Quotation to be evaluated for award. FAR 52.211-6.
15B61723Q00000016-1 Department of Justice Bureau of Prisons Federal Correctional Complex Lompoc
5/10/23, 3:57 PM High Temperature Flexure Test Stand Furnace
NASA LaRC is hereby soliciting information for potential sources to provide design, development and delivery of a High Temperature Flexure Test Stand Furnace that must fit inside a MTS Criterion Model C45.504 Wide test stand. An inert gas furnace for high temperature mechanical testing of carbon and metal-carbide based composites is required. The estimated general scope and high-level specification of the deliverables are outlined below (for full specification description – see attachment SOW – Specification Sheet)
Interested sources shall provide capabilities/product information on meeting the scope of the request and show prior experience in building a High Temperature Flexure Test Stand Furnace. Please limit responses to no more than 20 pages in length. Please provide a brief outline of the company’s business sector(s) including business size (e.g. Small Business, Other Than Small Business), Primary North American Industrial Classification System (NAICS) Code, DUNS Number or System for Award Management (SAM) registration number, if applicable. Also, please provide whether the likely products used have been sold in the commercial marketplace or only to Government entities.
This request for information is for market research and planning purposes only and is not to be construed as a commitment by the Government, nor will the Government pay for information solicited. Respondents will not be notified of any results of information collected. The information provided will assist the Government in its assessment of the current market and help develop and define the request for proposal for these systems.
Please submit responses by August 30th, 2021 at 2:00 PM EST. Email responses to: jo.rolfe@nasa.gov and lakhassia.y.mccoy@nasa.gov.
RFI-HighTemperatureFlexureTestStandFurnace-20210823 National Aeronautics and Space Administration Langley Research Center
8/23/21, 4:34 PM PARTS KIT, AIR DRIER
The Defense Logistics Agency Troop Support Construction and Equipment is seeking a Parts Kit for an Air Drier, with a specific National Stock Number (NSN 4440016484304). The solicitation is an Request for Quote (RFQ) that requires electronic submission of quotes by February 3, 2025. The procurement involves 329 units to be delivered within 50 days after order (ADO), with an approved source identified as BW R109493PG. This opportunity falls under the Industrial Process Furnace and Oven Manufacturing NAICS category (333994) and the Furnace/Steam/Drying PSC category. The solicitation indicates that all responsible sources may submit a quote, which will be considered if received in a timely manner, though no specific evaluation criteria beyond responsiveness are detailed in the notice.
The contract is designated as a Total Small Business set-aside, which means only small businesses are eligible to compete for this opportunity. The place of performance will be W1A8 DLA Distribution, with a relatively short delivery timeline of 50 days after order placement. While specific award value is not disclosed, the procurement involves 329 individual units of the air drier parts kit. No hard copies of the solicitation are available, and specifications, plans, or drawings will not be provided directly. Potential bidders must rely on the electronic solicitation link for all necessary information about the contract requirements and submission process.
SPE8E825T1718 Defense Logistics Agency Troop Support Construction and Equipment
1/23/25, 12:15 PM