USS JOHN FINN (DDG-113) FY26 6J1 CNO BUNDLE #1, Chief of Naval Operation Availability Yokosuka Japan
Closed Solicitation Posted
- Solicitation number
- N6264926RA009
- Agency
-
Naval Supply Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- J999 Non-Nuclear Ship Repair (West)
- Place of performance
- Yokosuka Kanagawa Japan
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Supply Systems Command through NAVSUP Fleet Logistics Center Yokosuka is soliciting proposals for ship repair, overhaul, preservation, and replacement work on the USS JOHN FINN (DDG-113) destroyer. The procurement encompasses twelve Task Group Instructions (TGIs) covering various maintenance activities including structural surface preservation, nonskid deck covering replacement, scaffolding installation, equipment modifications, and fuel piping replacement. Offerors must possess an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) and be authorized to operate in Japan, with Japanese and South Korean companies eligible to participate. The government will evaluate proposals using a Lowest Price Technically Acceptable (LPTA) methodology, considering technical acceptability, past performance, and price as the primary evaluation factors. The original proposal submission deadline of December 17, 2025, was extended multiple times through eight amendments, with the final deadline established as January 16, 2026, at 10:00 AM Japan Standard Time, and proposals must be submitted electronically to designated Navy personnel.
This contract is not subject to any set-aside designations and represents a firm-fixed-price single award opportunity with no identified incumbent contractors. The contract includes a base CLIN 0001 for primary work and a growth CLIN 0002 representing approximately 9.36 percent of total proposed cost, though specific contract values are not disclosed in the solicitation. The period of performance runs from April 20, 2026, through June 22, 2026, with all Task Group Instructions required to be completed by June 15, 2026, to meet the Navy's current schedule; late amendment discussions indicate potential authorization for midnight hot work operations to facilitate project completion. The work will be performed at Yokosuka Naval Base in Yokosuka, Japan, under the direction of the U.S. Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), which will provide supporting services including crane rigging, utility services, safety inspections, and quality assurance oversight.
Notice text
9 versions
Update #9 · Latest ·
30 Mar 2026
The purpose of reopen this solicitation amendment 0008 is to change the language in C3.1, Section C.
14 Jan 2026
The purpose of this solicitation amendment 0007 is to provide a memorandum for after hours of Hot Work, 300-23-224.After Hours Hotwork Memo (002) as additional reference for below answer of Q6 that previously answered in the amendment of solicitation 0005, to answer a question (Q7) from an offeror, and to change the language in Section A.
CONTRACTOR QUESTION:
Q6
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380.
We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.)
Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
A6
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week.
Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work
authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026.
38BC116801
(F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
CONTRACTOR QUESTION:
Q7
I would like to clarify the intent of my previous inquiry. My question was focused on eligibility regarding the contractor's nationality.
Previously, I understood that for non-CMAV (Continuous Maintenance Availability) repair projects, only U.S. companies were eligible to bid.
However, since DFARS 252.225-7042 primarily discusses the legal authority to operate within Japan, I wanted to confirm whether Japanese or South Korean companies are also eligible to participate in this specific solicitation.
As my inquiry was related to administrative eligibility rather than the technical scope of work, I reached out via email.
GOVERNMENT RESPONSE:
A7
Please confirm Section A, L, and M in the solicitation about eligibility for bidding. Regarding this questions, the language in Section A has been updated. Please confirm for the changes as well.
All other information remains unchanged.
See continuation page for details.
9 Jan 2026
The purpose of this amendment 0006 is to extend the solicitation due date to 16 Jan 2026.
All other information remains unchanged.
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #8 ·
14 Jan 2026
The purpose of this solicitation amendment 0007 is to provide a memorandum for after hours of Hot Work, 300-23-224.After Hours Hotwork Memo (002) as additional reference for below answer of Q6 that previously answered in the amendment of solicitation 0005, to answer a question (Q7) from an offeror, and to change the language in Section A.
CONTRACTOR QUESTION:
Q6
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380.
We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.)
Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
A6
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week.
Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work
authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026.
38BC116801
(F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
CONTRACTOR QUESTION:
Q7
I would like to clarify the intent of my previous inquiry. My question was focused on eligibility regarding the contractor's nationality.
Previously, I understood that for non-CMAV (Continuous Maintenance Availability) repair projects, only U.S. companies were eligible to bid.
However, since DFARS 252.225-7042 primarily discusses the legal authority to operate within Japan, I wanted to confirm whether Japanese or South Korean companies are also eligible to participate in this specific solicitation.
As my inquiry was related to administrative eligibility rather than the technical scope of work, I reached out via email.
GOVERNMENT RESPONSE:
A7
Please confirm Section A, L, and M in the solicitation about eligibility for bidding. Regarding this questions, the language in Section A has been updated. Please confirm for the changes as well.
All other information remains unchanged.
See continuation page for details.
9 Jan 2026
The purpose of this amendment 0006 is to extend the solicitation due date to 16 Jan 2026.
All other information remains unchanged.
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #7 ·
14 Jan 2026
The purpose of this solicitation amendment 0007 is to provide a memorandum for after hours of Hot Work, 300-23-224.After Hours Hotwork Memo (002) as additional reference for below answer of Q6 that previously answered in the amendment of solicitation 0005, and to change the language in Section A.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380.
We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.)
Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week.
Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work
authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026.
38BC116801
(F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
All other information remains unchanged.
See continuation page for details.
9 Jan 2026
The purpose of this amendment 0006 is to extend the solicitation due date to 16 Jan 2026.
All other information remains unchanged.
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #6 ·
9 Jan 2026
The purpose of this amendment 0006 is to extend the solicitation due date to 16 Jan 2026.
All other information remains unchanged.
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #5 ·
8 Jan 2026
The purpose of this amendment 0006 is to extend the solicitation due date to 16 Jan 2026.
All other information remains unchanged.
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #4 ·
7 Jan 2026
The purpose of this solicitation amendment 0005 is to respond to the questions.
CONTRACTOR QUESTION:
So far, we are unauthorized to do any hot work after 8 p.m., directed by the project and C380. We, however, have found it necessary to continue hot work by 12 p.m. (0 a.m.) Could you please repeal this only to this contract, and allow us to do Hot Work by 0 a.m.?
GOVERNMENT RESPONSE:
Here is a strategy changed come to conclusion in JFN project for AFT BERP discussed based on questions/requests from KTR through FLC this week. Project team is going to bring it up to FSC meeting and give a brief to SRF leadership to get a concurrence regarding as mid night hot work authorization by 24:00. End date of the POP is agreed to get an extension to 6/22/2026. 38BC116801 (F/O) EXSA-ZC00 SA 96350D 02 LEVEL BERP, INSTALL
17 DEC
The purpose of this solicitation amendment 0004 is to respond to the questions.
ATTACHMENT IV: REQUEST FOR INFORMATION (RFI)
1. DATE OF REQUEST: 17 Dec 2025
CONTRACTOR QUESTION(s):
38BC116801A01
Q1. Can we receive the GFM related to fabrication of BERP by the end of January, 2026 ?
Additionally, we would like to let us early start to fabricate BERP at the same juncture.
In para 1.3.2.1
Q2. If the above-mentioned request turns to be impossible, could you lower and specify the number of BREP to be fabricated only into One (BERP
No. 02-225-1)?
GOVERNMENT RESPONSE(s):
A1. YES, but depends on contract status. We will receive last material shortly.
A2. No
N6264926RA0090004
Page 2 of 2
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #3 ·
17 Dec 2025
The purpose of this amendment 0003 is to extend the solicitation due date to 9 Jan 2026.
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #2 ·
15 Dec 2025
The purpose of this solicitation amendment 0002 is to respond to the questions.
5 DEC 2025
MSRA/ABR Holders,
The purpose of amendment for the solicitation is to respond to the question.
See the attached documents for details.
-------------------------------------------------------------------------
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Update #1 ·
USS JOHN FINN (DDG-113) Chief of Naval Operation Availability (CNO):
NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement
in support of USS JOHN FINN (DDG-113) and US Naval Ship Repair Facility
and Japan Regional Maintenance Center (SRF-JRMC). The work is composed of
twelve (12) Task Group Instructions (TGIs) of various ship repair
overhaul, preservation, and replacement work onboard the ship.
Offers will be received until 17 Dec 2025, 10:00 AM (Please submit your
proposal to " kazuo.takamura.ln@us.navy.mil " in TO line)
PERIOD OF PERFORMANCE: 20 Apr 2026 through 22 Jun 2026
PLACE OF PERFORMANCE: Yokosuka Naval Base, Yokosuka, JAPAN
References in the Work Items will be provided to offerors via DoD safe (a
web-based tool that provides users the capability to securely send and
receive large files, including files that are too large to be transmitted
via email.)
Please email request for references to:
Kazuo Takamura (kazuo.takamura.ln@us.navy.mil)
Ai Gillard (ai.gillard.ln@us.navy.mil)
When submitting your proposal, you must specify any hazardous material in
accordance with FAR 52.223-3 (Hazardous Material ID) and DFARS 252.223-7001.
When submitting your proposal, you must specify if you anticipate sea
transportation in accordance with DFARS 252.247-7022.
If there is a time limit on your offer, you must specify this at submission
of your proposal.
If there are any amendments to this RFP, please acknowledge them when
submitting your proposal in the proposal comment section.
Files
Show all 37
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| USS BLUE RIDGE (LCC-19) TGI 3819P24302-A01, Yokosuka Japan | Naval Supply Systems Command | No set-aside | |
| USS SHOUP (DDG 86) SRA 7C1, Bundle 1 | Naval Supply Systems Command | No set-aside | |
| Ship Repair Services of Auxiliary Personnel Lighter (APL) Barge (APL-67) | Naval Supply Systems Command | No set-aside | |
| Replace, Nonskid Deck Covering on FWD 04 Level Weather Deck etc | Naval Supply Systems Command | No set-aside | |
| Preserve, Passage In 4-10-6-1-L | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity