Amendment_4_ARCH_-_7.17.2018.pdf

F.H.

H H

J J

K K

L L

M M

1C

1C

1D

1D

9.2

9.2

8.3

8.3

7.3

7.3

6.9

6.9

K.2 K.2

J.5 J.5

H.8 H.8

H.1 H.1

8.4

8.4

D02

D05 D05 D05 D05

D14

D27

M A

T C

H L

IN

E

D17

D22

D23

D32

D39

D31

D31

D31

D32 D39

D51

D39

8'

6'

D50

D31

8" 5'

2'

D39 D39

D02

D13

DEMOLITION FLOOR PLAN LEGEND

DENOTES FLOOR SLAB REMOVAL AND EXCAVATION

REQUIRED FOR INSTALLATION OF NEW WORK; REFER TO

KEY NOTES ON NEW WORK PLANS FOR ADDITIONAL

INFORMATION ON THE NATURE OF THE NEW WORK

ITEM TO BE DEMOLISHED; REFER TO KEYNOTE FOR

ADDITIONAL INFORMATION

MASONRY PARTITION TO BE DEMOLISHED; TO BE REMOVED

FULL HEIGHT, U.N.O. REFER TO KEYNOTE IF APPLICABLE

DENOTES EXTENT OF INTERIOR ROOF DEMOLITION FOR NEW

WORK; REFER TO KEY NOTES ON NEW WORK PLANS FOR

ADDITIONAL INFORMATION ON THE NATURE OF THE NEW WORK

METAL FRAMING / GYP BD PARTITION TO BE DEMOLISHED

EXISTING DOOR AND HARDWARE ONLY TO BE

DEMOLISHED, FRAME TO REMAIN

EXISTING DOOR, FRAME, AND HARDWARE TO BE

DEMOLISHED

DENOTES TOPPING FLOOR SLAB REMOVAL (2" OR 4"); REFER

TO KEY NOTES ON NEW WORK PLANS FOR ADDITIONAL

INFORMATION ON THE NATURE OF THE NEW WORK

DENOTES EXTERIOR PAVING TO BE REMOVED AND / OR

MODIFIED. REFER TO CIVIL DRAWINGS FOR MORE INFORMATION.

DEMOLITION GENERAL NOTES

A. THE SCOPE OF DEMOLITION WORK IS A FULL "GUT" RENOVATION WITH THE

EXCEPTION OF WALLS AND BUILDING SHELL STRUCTURE. WALLS TO REMAIN / BE

DEMOLISHED ARE SHOWN IN THE DEMOLITION PLAN. ALL CEILINGS. FLOORING

FINISH, PLUMBING, PLUMBING FIXTURES, ELECTRICAL, ELECTRICAL FIXTURES /

EQUIPMENT, MECHANICAL PIPING / DUCTWORK / EQUPMENT.

B. REFER TO THE SPECIFICATIONS FOR MORE INFORMATION ON SELECTIVE

DEMOLITION AND ASBESTOS ABATEMENT.

C. REFER TO CIVIL, PLUMBING, MECHANICAL, AND ELECTRICAL DEMOLITION DRAWINGS

FOR MORE INFORMATION ON DEMOLITION OF THOSE SYSTEMS AND EQUIPMENT.

D. CODED NOTES SHOWN IN THE SHEDULE MAY NOT BE USED ON THIS SHEET.

E. STRUCTURAL GRID FOR NEW CONSTRUCTION NOT SHOWN ON DEMOLITION PLANS.

F. SLAB CUTS SHOWN ON THE DEMOLITION PLANS ARE APPROXIMATE AND BASED ON

INFORMATION OBTAINED FROM RECORD DRAWINGS. EXACT EXTENT OF SLAB

REMOVAL MUST BE FIELD VERIFIED BY CONTRACTOR.

G. OWNER WILL REMOVE ALL SHOP EQUIPMENT AND LOOSE FURNISHINGS PRIOR TO

CONSTRUCTION

H. BUILDING WILL NOT BE IN OPERATION DURING CONSTRUCTION.

I. AT LOCATIONS OF EXISTING OPENINGS TO BE INFILED WITH NEW CMU INFILL, NEW

WORK SHALL BE "TOOTHED" INTO EXISTING MASONRY WALLS AS INDICATED ON

STRUCTURAL DRAWINGS.

J. DEMOLITION DRAWINGS ARE BASED ON AVAILABLE INFORMATION PROVIDED BY THE

OWNER AND FROM FIELD INVESTIGATIONS AND MAY NOT REPRESENT ALL EXISTING

CONDITIONS.

K. SURFACES DAMAGED DURING DEMOLITION AND / OR CONSTRUCTION ARE TO BE

PATCHED AND REPAIRED AS REQUIRED AND FINISHED TO MATCH ADJACENT AREAS.

L. DIMENSIONS ASSOCIATED WITH DEMOLITION WORK MUST BE FIELD VERIFIED.

M. ALL ITEMS SHOWN WITH DASHED LINES SHALL BE REMOVED AND DISPOSED OF

UNLESS NOTED OTHERWISE.

N. ALL DEMOLITION WORK TO BE COORDINATED WITH NEW CONSTRUCTION WORK AS

SHOWN ON ALL OTHER DRAWINGS.

O. ALL SLAB REMOVALS FOR NEW WORK SHALL BE INFILLED UP TO THE FINISH FLOOR

HEIGHT OF THE ADJACENT FLOORS.

P. CONTRACTOR IS REQUIRED TO REMOVE ALL INTERIOR BUILDING SIGNAGE AND

PATCH / INFILL ALL HOLES IF IN EXISTING WALL TO REMAIN.

Q. REMOVE ALL WALL MOUNTED ITEMS (SHELVING, BRACKINGS, MIRRORS, MARKER

BOARDS, TACK BOARDS, ETC) AND PATCH AS NEEDED IF WALL IS TO REMAIN.

R. ALL PENETRATIONS THROUGH INTERIOR CAPS / ROOFS AND INTERIOR CMU WALLS

NO LONGER BEING USED (MEP PENETRATIONS, ETC) TO BE PATCHED / INFILLED THE

SAME AS THE ADJACENT MATERIAL UNLESS NOTED OTHERWISE.

S. THE BUILDING OWNER, OANG, HAS A GOAL OF 95% OF WAST BEING DIVERTED FROM

THE LAND FILL.

N A

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:5

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

FIRST FLOOR DEMOLITION PLAN -

AREA A

AD101-A

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

0 4 8 162

1/8" = 1'-0"AD101-A

1 FIRST FLOOR DEMOLITION PLAN - AREA A

NO. CODED NOTES - DEMOLITION

D33 CENTER NEW OPENING AT CENTER POINT OF STRUCTURAL BAY

D34 NOTE THAT THE DEMOLITION OF THIS WALL REQUIRES A NEW WALL TO BE INFILLED

BETWEEN THE LOW AND HIGH ROOF ABOVE, REFER TO ROOF DETAIL

D35 REMOVE EXISTING CRANE RAIL & BRIDGE

D36 REMOVE EXISTING CRANE

D37 REMOVE EXISTING STAIR STRUCTURE

D38 EXISTING FIRE SUPRESSION RISERS TO REMAIN

D39 REMOVE EXISTING CONCRETE SLABS IN THIS LOCATION FOR UNDERGROUND PLUMBING

WORK, REFER TO PLUMBING DRAWINGS FOR MORE INFORMATION

D40 REMOVE EXISTING EXTERIOR WINDOW BEHIND SIDING, OPENING TO BE REUSED FOR NEW

MECHANICAL LOUVERS

D41 REMOVE EXISTING EXTERIOR SIDING IN LOCATION OF REMOVED WINDOW

D42 REMOVE EXISTING LOUVER, SEE ELEVATIONS AND MECHANICAL DRAWINGS

D43 REMOVED ELECTRICAL EQUIPMENT, REFER TO ELECTRIC DRAWINGS FOR MORE

INFORMATION

D44 REMOVE EXISTING HANGAR SLAB IN THIS AREA FOR ELEVATOR PIT AND HOISTWAY WALL

FOOTINGS

D45 REMOVE EXISTING CASEWORK

D46 EXISTING ASPHALT TO BE REMOVED IN THIS AREA, REFER TO CIVIL DRAWINGS FOR MORE

INFORMATION

D47 MODIFY EXISTING TRENCH DRAIN, REFER TO CIVIL DRAWINGS FOR MORE INFORMATION

D48 REMOVE EXISTING WALL TO CREATE NEW OPENING FOR NEW OVERHEAD DOOR

D49 SLAB REMOVAL FOR REMOVAL AS REQUIRED FOR REMOVAL OF FOUNDATIONS FOR

EXISTING STAIR WALLS BEING REMOVED

D50 REMOVE EXISTING SHRUBS AND TREES, REFER TO CIVIL DRAWINGS FOR MORE

INFORMATION ON THE NATURE OF THE WORK

D51 MECHANICAL UNIT AND PAD TO BE REMOVED, REFER TO MECHANICAL DRAWINGS FOR

MORE INFORMATION

D52 REMOVE EXISTING FOAM FIRE SUPPRESSION GENERATOR AND STRUCTURE AND

RELOCATE PER FIRE SUPPRESSION DRAWINGS

D53 EXISTING FOAM FIRE SUPPRESSION LINES TO BE RAISED TO BOTTOM OF HANGAR

STRUCTURE, REFER TO FIRE SUPPRESSION DRAWINGS FOR MORE INFORMATION

D54 REMOVE EXISTING 4" SLOPED TOP COATING FLOOR SLAB IN THIS LOCATION

D55 REMOVE BRIDGE CRANE RAIL VERTICAL SUPPORTS, TYP

D56 ROOF BELOW, REFER TO SECOND FLOOR DEMOLITION PLAN FOR DEMOLITION

INFORMATION ON THIS ROOF

D57 EXISTING FOAM FIRE SUPPRESSION GENERATOR AND STRUCTURE TO REMAIN, REFER TO

FIRE SUPPRESSION DRAWINGS FOR MORE INFORMATION

D58 REMOVE EXISTING WALL FOR NEW OPENING TO ELEVATOR, HEIGHT OF OPENING IS 7'-4"

FROM FINISH FLOOR

D59 REMOVE EXISTING WINDOW AND PREP OPENING FOR NEW METAL LOUVER, REFER TO

ELEVATIONS AND MECHANICAL DRAWINGS FOR MORE INFORMATION

D60 REMOVE EXISTING ROOF AND STRUCTURAL DECKING IN THIS LOCATION FOR NEW

MECHANICAL PENETRATION. REMOVE ROOFING MATERIAL ABOVE DECK (INSULATION,

BUILT UP ROOFING, ETC) 2" LARGER THAN OPENING IN DECK TO ALLOW FOR NEW STEEL

PLATE COVER BEARING. REFER TO MECHANICAL DRAWINGS FOR MORE INFORMATION.

NO. CODED NOTES - DEMOLITION

D01 REMOVE EXISTING PORTION OF CMU WALL AS NEEDED TO PLACE NEW FOOTINGS FOR

MECHANICAL PLATFORM COLUMNS. REMOVED PORTION OF CMU TO BE REPLACED WITH

NEW

D02 REMOVE EXISTING WALL FOR NEW DOOR OPENING, SEE DOOR SCHEDULE FOR OPENING

DIMENSIONS

D03 REMOVE EXISTING ENTIRE HANGAR FLOOR SLAB IN THIS LOCATION TO ALLOW FOR

CONSTRUCTION OF NEW WALLS AND FOOTINGS

D04 REMOVE EXISTING 2" TOP COATING FLOOR SLAB IN THIS LOCATION

D05 REMOVE EXISTING CONCRETE RAMP

D06 REMOVE EXISTING ROOF ACCESS LADDER

D07 REMOVE EXISTING COILING DOOR

D08 REMOVE EXISTING WINDOW AND FRAME

D09 REMOVE EXISTING EXTERIOR GLASS DOOR AND GLASS FROM

D10 REMOVE EXISTING OVERHEAD DOOR

D11 REMOVE EXISTING TOILET PARTITION, TYPICAL THROUGHOUT

D12 REMOVE EXISTING TOILET FIXTURE/SINK, TYPICAL THROUGHOUT

D13 REMOVE EXISTING OVERHEAD DOOR AND HARDWARE, OPENING TO BE PARTIALLY INFILLED

WITH NEW SMALLERS OVERHEAD DOOR AND MAN DOOR

D14 COMPLETELY REMOVE EXISTING CEILING AND ANY ASSOCIATED GRID, HANGERS ENTIRELY

IN THIS ROOM

D15 REMOVE THE EXTENT OF LADDER TO ABOVE THE NEW ROOF ELEVATION

D17 REMOVE EXISTING WIRE MESH WALL AND FRAME

D18 REMOVE EXISTING BOLLARDS IN THIS LOCATION

D20 REMOVE ENTIRE PORTION OF EXISTING ROOF STRUCTURE IN THIS AREA

D21 REMOVE ROOF HATCH AND LADDER; SEE DETAILS ON NEW WORK PLANS FOR COVERING

OPENING AND REROOFING

D22 REMOVE EXISTING CHAIN LINK CAGE AND METAL ROOF

D23 REMOVE VCT FLOORING

D24 REMOVE PORTION OF EXISTING WALL FOR NEW ELEVATOR HOISTWAY ENCLOSURE

D25 REMOVE CONCRETE MECHANICAL PAD

D26 REMOVE GRAVEL BALASTED ROOF SYSTEM. SAVE GRAVEL BALAST AS NEEDED TO

REPLACE. SEE NEW CONSTRUCTION DETAIL.

D27 REMOVE EXISTING LOUVER AND PREP OPENING FOR NEW LOUVER, SEE ELEVATIONS AND

MECHANICAL DRAWINGS

D28 REMOVE SLAB IN THIS AREA AND PREPARE FOR INSTALLATION OF RECESSED 3/4" WALK

OFF MAT THAT WILL BE LEVEL WITH SURROUNDING FINISH FLOOR

D29 REMOVE PORTITION OF WALL FOR NEW WINDOW OR DOOR, SEE FLOOR PLAN AND WINDOW

AND WINDOW TYPES FOR MORE INFORMATION

D30 REMOVE EXISTING ROOF AND STRUCTURAL DECKING IN THIS LOCATION FOR

CONSTRUCTION OF MECHANICAL PLATFORM STRUCTURAL COLUMNS. REMOVE ROOFING

MATERIAL ABOVE DECK (INSULATION, BUILT UP ROOFING, ETC) 2" LARGER THAN OPENING

IN DECK TO ALLOW FOR NEW STEEL PLATE COVER BEARING. REFER TO STRUCTURAL

DRAWINGS FOR MORE INFORMATION.

D31 GRIND / SAW CUT EXISTING SLAB AS REQUIRED TO MAINTAIN PLACING THICKNESS FOR

NEW RAMPS, TYPICAL. REFER TO TYPICAL CONCRETE DETAILS ON STRUCTURAL

DRAWINGS FOR MORE INFORMATION

D32 REMOVE EXISTING FLOOR SLAB IN THIS LOCATION FOR MECHANICAL PLATFORM

STRUCTURE. REFER TO STRUCTURAL DETAIL FOR AMOUNT OF SLAB TO BE REMOVED FOR

PLACEMENT OF NEW FOUNDATIONS AND SLABS

I/R DATE DESCRIPTION

1 17 JULY 2018 AMENDMENT 4

APPROXIMATE OVERALL DIMENSION

428' - 8"

A P

P R

O X

IM

A

T E

O V

E R

A

LL

D

IM

E N

S

IO

N

1'

ROOF BELOW TO REMAIN

ROOF BELOW TO REMAIN

ROOF BELOW TO REMAIN

ROOF EDGE FLASHING TO BE

REMOVED AND REPLACED AFTER

ROOF HAS BEEN REPLACED.

TYPICAL ON ENTIRE ROOF. SEE

PHOTOS OF EXISTING CONDITIONS

DEMOLITION ROOF PLAN LEGEND

EXISTING PENTHOUSE LOUVERS

TO REMAIN

EXISTING LOUVER PENTHOUSES TO BE

DEMOLISHED. PENTHOUSES ARE

APPROXIMATELY 7' TALL AND WEIGH 250

LBS. COORDINATE WITH MECHANICAL

EXISTING LIGHTS TO BE DEMOLISHED,

MOUNTING STRUCTURE TO REMAIN.

COORDINATE WITH ELECTRICAL

ROOF MEMBRANE AND INSULATION

TO BE REMOVED DOWN TO

STRUCTURAL DECK

EXHAUST FANS TO BE REMOVED. DECK

TO BE COVERED WITH NEW TO MATCH

EXISTING, INFILL INSULATION TO MATCH

EXISTING AND ROOF WITH NEW.

COORDINATE WITH MECHANICAL

EXTERIOR ROOF REPLACEMENT GENERAL NOTES

A. SCOPE OF EXTERIOR ROOF WORK IS ESSENTIALLY A LIKE FOR LIKE REPLACEMENT OF

EXISTING MEMBRANCE ROOF AND INSULATION WITH THE EXCEPTION THAT THE NEW ROOF

IS A WHITE MEMBRANE ROOF. DECKING AND STRUCTURE TO REMAIN UNLESS DAMAGED

AND NEED REPLACEMENT.

B. EDGE ROOF FLASHING TO BE REMOVED AND REPLACED.

C. SCOPE ALSO TO INCLUDE TEAR OFF INSULATION, NAILERS, FLASHINGS, ETC.)

D. ROOF REPLACEMENT DESCRIBED ON THIS SHEET IS ONLY FOR THE MAIN HANGAR SHELL

BUILDING EXTERIOR ROOF. OTHER ROOFING WORK DESCRIBED ELSEWHERE.

E. FIELD SURVEYS WERE NOT CONDUCTED BY THE AE TEAM FOR THE EXTERIOR ROOF.

CONTRACTOR SHOULD FIELD VERIFY EXISTING CONDITIONS TO GRASP THE SCOPE. SEE

PICTURES OF EXISTING CONDITIONS ON THIS SHEET.

F. SEE PROJECT MANUAL FOR MORE INFORMATION.

N A

B

C

D

E

F

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:5

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

ROOF DEMOLITION PLAN -

EXTERIOR

AD141

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

0 8 16 324

1/16" = 1'-0"AD141

1 ROOF DEMOLITION PLAN - EXTERIOR

I/R DATE DESCRIPTION

1 17 JULY 2018 AMENDMENT 4

NOT TO SCALEAD141

2 EXISTING ROOF PHOTOS

F.H. F.H.

H H

J J

K K

L L

M M

1C

1C

1D

1D

9.2

9.2

8.3

8.3

7.3

7.3

6.9

6.9

K.2 K.2

J.5 J.5

H.8 H.8

H.1 H.1

8.4

8.4

Tool Crib

Jet Engine Inspection

Shop

Welding Shop

Fabrication Shop

X-Ray Room

Dark Room

Storage

NDI Inspection Shop

Structures Office

Jet Shop Office

Jet Shop Admin

Corridor

C10

Computer / Admin Room

Fabrication Admin

A503

8.5

8.5

8.7

8.7

9.4

9.4

H.15 H.15

H.4 H.4

H.6 H.6

102B

106A

106B

101C

102A 101A 101B

143 144

101D

110B

110A

105103 104

102C

A403

A404

100E

A201 2

W4W4

A301

A501

A501

SIM

A501

SIM

A501

SIM

W6

MATCHLINE

M A

T C

H L

IN

E

CALLOUT FLOOR PLAN GENERAL NOTES

A. DO NOT SCALE DRAWINGS.

B. FURNITURE AND SHOP EQUIPMENT SHOWN FOR REFERENCE ONLY AND IS N.I.C.

C. SHOP EQUIPMENT SHOWN FOR REFERENCE ONLY AND IS A BY OWNER ITEM. FOR MORE

SHOP EQUIPMENT INFORMATION, REFER TO ENLARGED SHOP PLANS

D. REFER TO CONSTRUCTION PLANS FOR CODED NOTES, LEGENDS, DIMENSIONS, AND

WALL TAGS

E. NEW COLUMN GRIDS ONLY SHOWN ON AREA PLANS IF THEIR ASSOCIATED STRUCTURAL

ELEMENT IS ALSO LOCATED IN SAME AREA.

N A

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:4

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

FIRST FLOOR CALLOUT PLAN -

AREA A

A102-A

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

0 4 8 162

1/8" = 1'-0"A102-A

1 FIRST FLOOR CALLOUT PLAN - AREA A

E E

F F

G G

H H

1B

1B

1A

1A

1.9

1.9

H.1 H.1

E.9 E.9

Secure Briefing

MOC

QA

Plans & Sch.

Women

Counseling

Analysis

Men

QA Office

MOC Secure

9' - 0"

GYP BD

9' - 0"

GYP BD9' - 0"

ACT - 2X4

8' - 0"

ACT - 2X4

8' - 0"

ACT - 2X4

10' - 0"

ACT - 2X4

10' - 0"

ACT - 2X4

EXP STR

12' - 8"

Stair

S2

Stair

S3

Elevator

E1

Storage

EXP STR

12' - 8"

C02

2.8

2.8

1.2

1.2

1.1

1.1

H.3 H.3

C02

C02

EXP STR

(EXIST HT)

8' - 0"

ACT - 2X4

8' - 0"

ACT - 2X4

9' - 0"

ACT - 2X4

9' - 0"

ACT - 2X4

9'

A C

T

X

9' - 0"

ACT - 2X4

9' - 0"

ACT - 2X4

C02

C02

EXP STR

12' - 3" (EXIST)

MATCHLINE

MATCHLINE

C07

C07

CEILING PLAN GENERAL NOTES

A. DO NOT SCALE DRAWINGS.

B. CODED NOTES SHOWN ON SCHEDULE MAY NOT BE USED ON THIS SHEET.

C. COORDINATE TYPE AND SIZE OF LIGHT FIXTURES, DIFFUSERS, HVAC EQUIPMENT,

AND SPRINKLERS WITH MECHANICAL, ELECTRICAL, AND PLUMBING DRAWINGS.

D. CEILING GRIDS SHALL BE CENTERED IN RESPECTIVE ROOMS UNLESS NOTED

OTHERWISE.

E. ALL ACOUSTICAL TILE AND GYPSUM BOARD CEILINGS TO BE 10'-0" UNLESS NOTED

OTHERWISE.

F. SEE ELECTRICAL DRAWINGS FOR TYPE OF LIGHT FIXTURES AND

COMMUNICATIONS DEVICES.

G. SEE MECHANICAL DRAWINGS FOR TYPE OF DIFFUSERS.

H. REFER TO FIRE PROTECTION DRAWINGS FOR SPRINKLER HEAD LOCATIONS.

I. CEILING HEIGHTS ARE RELATIVE TO FINISH FLOOR WITHIN THAT SPACE.

J. SPACES WITH NO CEILINGS NOTED AS "EXP STR" AND REFER TO AN EXISTING

UNDERSIDE OF DECK, LIST AN APPROXIMATE HEIGHT. IN SOME CASES IT MAY

VARY DUE TO A SLOPING DECK. IN THE CASE OF A SLOPING DECK, THE

APPROXIMATE HEIGHT LISTED IS ITS HIGHEST POINT. INTERIOR ROOF PLAN

SHOWS WHICH AREAS ARE SLOPING.

REFLECTED CEILING PLAN SYMBOLS

DOWN LIGHT FIXTURE

HVAC DIFFUSER / PERFORATED GRILLE, SUPPLY AIR

- SEE MECHANICAL DRAWINGS FOR MORE

INFORMATION

HVAC DIFFUSER / PERFORATED GRILLE, RETURN

AIR - SEE MECHANICAL DRAWINGS FOR MORE

INFORMATION

EXIT SIGNAGE

HVAC LINEAR DIFFUSER - SEE MECHANICAL FOR

MORE INFORMATION

2' x 2' ACCESS PANEL

CEILING MOUNTED PROJECTOR LOCATION

WALL-MOUNTED LIGHT FIXTURE

RECESSED/FLUSH-MOUNTED LIGHT

FIXTURE

LAY-IN LED LIGHT FIXTURE

PENDANT "UP DOWN" LIGHT FIXTURE

SEMI-RECESSED DECORATIVE LIGHT FIXTURERECESSED CIRCULAR HVAC SUPPLY DIFFUSER -

SEE MECHANICAL FOR MORE INFORMATION

OCCUPANCY SENSOROS

NEW FAN, SEE MECHANICAL DRAWINGS

FOR MORE INFORMATION

N

E

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:4

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

SECOND FLOOR CEILING PLAN -

AREA E

A122-E

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

0 4 8 162

1/8" = 1'-0"A122-E

1 SECOND FLOOR CEILING PLAN - AREA E

NO. CODED NOTES - FLOOR PLAN

C01 EXISTING CRANE TRACK

C02 GYP BD BULKHEAD

C03 EXISTING FAN TO REMAIN

C04 NEW METAL PANEL BETWEEN EXISTING HANGAR WALL AND NEW INTERIOR WALL

C05 FIRE SUPPRESSION FOAM GENERATOR

C06 NEW BULKHEAD FOR OPERABLE PARTITION WALL

C07 ROLLER SHADES OVER THIS WINDOW

APPROXIMATE OVERALL DIMENSION

428' - 8"

A P

P R

O X

IM

A

T E

O V

E R

A

LL

D

IM

E N

S

IO

N

1'

37' - 8"

37' - 8"

ROOF BELOW TO REMAIN

ROOF BELOW TO REMAIN

ROOF BELOW TO REMAIN

PREFABRICATED

CANOPY ROOF BELOW

NEW MEMBRANE ROOF

EXTERIOR ROOF PLAN LEGEND

NEW LOUVER PENTHOUSES IN PLACE OF

REMOVED PENTHOUSES. INTENDED TO BE A

"LIKE FOR LIKE" REPLACEMENT.

NEW LED LIGHTS IN EXISTING MOUNTING

STRUCTURE.

EXTERIOR ROOF REPLACEMENT GENERAL NOTES

A. SCOPE OF EXTERIOR ROOF WORK IS ESSENTIALLY A LIKE FOR LIKE REPLACEMENT OF

EXISTING MEMBRANCE ROOF AND INSULATION WITH THE EXCEPTION THAT THE NEW ROOF

IS A WHITE MEMBRANE ROOF. DECKING AND STRUCTURE TO REMAIN UNLESS DAMAGED

AND NEED REPLACEMENT.

B. EDGE ROOF FLASHING TO BE REMOVED AND REPLACED.

C. SCOPE ALSO TO INCLUDE TEAR OFF INSULATION, NAILERS, FLASHINGS, ETC.)

D. ROOF REPLACEMENT DESCRIBED ON THIS SHEET IS ONLY FOR THE MAIN HANGAR SHELL

BUILDING EXTERIOR ROOF. OTHER ROOFING WORK DESCRIBED ELSEWHERE.

E. FIELD SURVEYS WERE NOT CONDUCTED BY THE AE TEAM FOR THE EXTERIOR ROOF.

CONTRACTOR SHOULD FIELD VERIFY EXISTING CONDITIONS TO GRASP THE SCOPE. SEE

PICTURES OF EXISTING CONDITIONS ON THIS SHEET.

F. SEE PROJECT MANUAL FOR MORE INFORMATION.

N A

B

C

D

E

F

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:5

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

ROOF PLAN - EXTERIOR

A141

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

0 8 16 324

1/16" = 1'-0"A141

1 ROOF PLAN - EXTERIOR

I/R DATE DESCRIPTION

N A

B

C

D

E

F

PROJECT

CLIENT

CONSULTANT

CONSULTANTS

REGISTRATION

ISSUE/REVISION

KEY PLAN

SHEET NUMBER

SHEET TITLE

CLIENT PROJECT NUMBER

L a s t P lo tt e d

F ile n a m e

Printed on ___% Post-Consumer Recycled Content Paper

A R

C H

E x

P ro je c t M a n a g e m e n t In it ia ls

D e s ig n e r:

C h e c k e d

A p p ro v e d

123456

A

B

C

D

E

6 5 4 3 2 1

100% DESIGN SET

Ohio Air National Guard 7370 Minuteman Way

Columbus, Ohio 43217

614.492.4459 tel www.goang.com

AECOM

277 W. Nationwide Blvd.

Columbus, Ohio 43215

614.464.4500 tel www.aecom.com

A

B

C

D

E

FE

N

T R

A N

C E

S

ID

E

A

IR

S

ID

E

/1

/2

:5

:5

P

M C

P ro g ra m F ile s \A u to d e s k \P ro je c ts

\6

H a n g a r8

A a n d re w .h u b e r.

rv t

Rickenbacker ANG Base, Renovate Hangar 885

P#60443615

DOOR SCHEDULES

A602

P#NLZG102008

A H

/B S

A H

/B S

B S

01.13.2017

ID ROOM DOOR FRAME

LABEL

HDW

SET

DETAILS

COMMENTSMARK TYPE

SIZE MATERI

AL TYPE MATERIAL FINISH HEAD JAMB SILLWIDTH HEIGHT THICKNESS

166C Avionics F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM ----- 7 2/A504 3/A504 1/A504 ACCESS CONTROL W/ CARD READER

167 Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 21 H2/A604 J2/A604 -----

168 Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 21 H2/A604 J2/A604 -----

169 Secure Room F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 37 H2/A604 J2/A604 -----

170 E&E NLFR 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM 45 MIN 17 H3/A604 J3/A604 -----

171 E&E Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 22 H2/A604 J2/A604 -----

172A E&E Maintenance F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM ----- 61 H2/A604 J2/A604 -----

172B E&E Maintenance OH-C (FR) 8' - 0" 10' - 0" 2" MT ----- ----- ----- 60 MIN ----- H5/A604 J5/A604 ----- OVERHEAD COILING DOOR

173 Test Room F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM ----- 56 H2/A604 J2/A604 -----

174 Mechanical Room F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM ----- 57 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

201A Secure Briefing NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 20 H1/A604 J1/A604 ----- CYPHER LOCK

201B Secure Briefing NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

202A MOC NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 20 H1/A604 J1/A604 ----- CYPHER LOCK

202B MOC NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 33 H1/A604 J1/A604 -----

203 MOC Secure F 3' - 0" 7' - 0" 1 3/4" HM 1 HM HM ----- 23 H1/A604 J1/A604 ----- ACCESS CONTROL W/ CARD READER - SCIF LOCK

204 Plans & Sch. NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 20 H1/A604 J1/A604 ----- CYPHER LOCK

205A QA NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 22 H1/A604 J1/A604 -----

205B QA NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

206 QA Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

207 Analysis NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 22 H1/A604 J1/A604 -----

210 Women F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 25 H2/A604 J2/A604 -----

211 Men F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 26 H2/A604 J2/A604 -----

212 Counseling NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

213 Storage NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 37 H1/A604 J1/A604 -----

214 Supply NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 37 H1/A604 J1/A604 -----

215 AMXS Chief NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

216 EMF Chief NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

217 CRF Chief NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

218 MOF Chief NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

219 First Sgt NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

220 First Sgt NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

221 Consult NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 29 H1/A604 J1/A604 -----

222 Maint. Officers NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 29 H1/A604 J1/A604 -----

223A Conference / Standup Room

HG 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM

----- 30

H1/A604 J1/A604 -----

223B Conference / Standup Room

HG 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM

----- 29

H1/A604 J1/A604 -----

224A Electrical Closet F 3' - 0" 7' - 0" 1 3/4" HM 1 HM HM 45 MIN 31 H1/A604 J1/A604 -----

224B Electrical Closet F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 31 H2/A604 J2/A604 -----

E1 Elevator ----- EH1/A604 EJ1/A604 ES1/A604 ELEVATOR DOOR

E2 Elevator ----- EH1/A604 EJ1/A604 ES1/A604 ELEVATOR DOOR

ID ROOM DOOR FRAME

LABEL

HDW

SET

DETAILS

COMMENTSMARK TYPE

SIZE MATERI

AL TYPE MATERIAL FINISH HEAD JAMB SILLWIDTH HEIGHT THICKNESS

001 Entry FG 3' - 0" 7' - 0" 1 3/4" AL 5 AL AL ----- 3 11/A504 10/A504 6/A504 NEW DOOR, FRAME, AND HARDWARE IN EXISTING OPENING

002A Entry F 6' - 0" 7' - 0" 1 3/4" AL 4 AL AL ----- 4 EXISTING EXISTING EXISTING NEW DOOR, FRAME, AND HARDWARE IN EXISTING OPENING

002B Entry F 4' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 36 H2/A604 J2/A604 -----

003 Entry F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 9 EXISTING EXISTING EXISTING NEW DOOR, FRAME, AND HARDWARE IN EXISTING OPENING

004A Entry FG 6' - 0" 7' - 0" 1 3/4" AL/GL 6 AL AL ----- 4 12/A504 10/A504 7/A504

004B AMU Open Office FG 6' - 0" 7' - 0" 1 3/4" AL/GL 6 AL AL ----- 52 H7/A604 J7/A604 -----

005 Entry F 5' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 8 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

006 Mech Room F 6' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 35

EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME, ACCESS

CONTROL W/CARD READER

010 Corridor F 4' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 2 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

011 Corridor F 6' - 0" 7' - 0" 1 3/4" WD 4 HM HM ----- 38 H2/A604 J2/A604 -----

013 Corridor F 4' - 0" 7' - 2" 1 3/4" HM 2 HM HM 45 MIN 2 H3/A604 J3/A604 ----- ACCESS CONTROL W/ CARD READER

015 Corridor F 5' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 39 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

016A Corridor NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 40 H1/A604 J1/A604 -----

016B Corridor F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 14 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

020A Stair F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 60 MIN 1 H3/A604 J3/A604 ----- ACCESS CONTROL W/ CARD READER

020B Stair F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 60 MIN 58 H2/A604 J2/A604 -----

030A Stair F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 60 MIN 1 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

030B Corridor F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 60 MIN 53 H2/A604 J2/A604 -----

040 Corridor F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 60 MIN 58 H2/A604 J2/A604 -----

100A Maintenance Hangar F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 54 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

100B OH-S 12' - 0" 7' - 4" 2" MT EXISTING EXISTING PTD ----- ----- 16/A504 15/A504 EXISTING OVERHEAD SECTIONAL DOOR

100C Maintenance Hangar F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 10 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

100D F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 32 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

100E F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 32 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

101A Tool Crib F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM ----- 12 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

101B Tool Crib OH-C (COUNTER) 8' - 0" 3' - 10" 2" MT ----- ----- ----- ----- ----- H4/604 J4/604 S1/A604 OVERHEAD COILING COUNTER DOOR

101C Tool Crib OH-C (FR) 8' - 0" 12' - 0" 2" MT ----- ----- ----- 60 MIN ----- H4/604 J4/604 ----- OVERHEAD COILING DOOR

101D Tool Crib OH-C (FR) 8' - 0" 10' - 0" 2" MT ----- ----- ----- ----- ----- H4/604 J4/604 ----- OVERHEAD COILING DOOR

102A Jet Engine Inspection Shop

F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM

----- 51

H2/A604 J2/A604 -----

102B Jet Engine Inspection Shop

OH-S 16' - 0" 14' - 0" 2" MT ----- ----- -----

16/A504 15/A504 EXISTING OVERHEAD SECTIONAL DOOR

102C Jet Engine Inspection Shop

F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM

----- 54

2/A504 3/A504 1/A504

103 Jet Shop Office NL 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 21 H2/A604 J2/A604 -----

104 Jet Shop Admin NL 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 21 H2/A604 J2/A604 -----

105 Computer / Admin Room

HG 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM

----- 29

H2/A604 J2/A604 -----

106A Welding Shop F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 55 H2/A604 J2/A604 -----

106B Welding Shop OH-C 8' - 0" 10' - 0" 2" MT ----- ----- ------ ----- ----- H4/A604 J4/A604 ----- OVERHEAD COILING DOOR

107 Fabrication Shop F 6' - 0" 7' - 0" 1 3/4" HM 4 HM HM ----- 56 H2/A604 J2/A604 -----

110A NDI Inspection Shop HG 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 29 H2/A604 J2/A604 -----

110B NDI Inspection Shop F 3' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 6 EXISTING EXISTING EXISTING NEW DOOR AND HARDWARE IN EXISTING FRAME

111 Storage F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 46 EXISTING EXISTING -----

112 Structures Office HG 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 29 H2/A604 J2/A604 -----

113 Fabrication Admin NL 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 29 H2/A604 J2/A604 -----

114 IT F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM ----- 37 H2/A604 J2/A604 -----

115 Mechanical F 6' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 41 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

116A Training Manager / Testing

NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM

----- 21

H2/A604 J2/A604 -----

116B Training Manager / Testing

F 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM

----- 21

H1/A604 J1/A604 -----

117A Production Room NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 43 H2/A604 J2/A604 -----

117B Production Room NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 30 H2/A604 J2/A604 -----

118 Orderly Room NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 42 H2/A604 J2/A604 -----

119 RA Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 21 H2/A604 J2/A604 -----

120 UDM Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 22 H2/A604 J2/A604 -----

121 Storage F 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 46 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

122 Open Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 29 H2/A604 J2/A604 -----

123 MXG/DC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

124 MOC OIC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

125 MXS/CC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

126 MXG/CC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

127 AMXS/CC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

128 MOF/CC Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM ----- 21 H1/A604 J1/A604 -----

129 SIPR F 3' - 0" 7' - 0" 1 3/4" WD 3 HM HM ----- 24 H1/A604 J1/A604 ----- ACCESS CONTROL W/ CARD READER - SCIF LOCK

130A AGE Shop F 6' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 50 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

130B AGE Shop F 5' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 5 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

130C AGE Shop F 3' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD ----- 45 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

131 AGE Office F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD ----- 21 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

132 Battery Shop F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 49 H2/A604 J2/A604 -----

133 Repair & Rec/Wheel & Tire Shop

F 6' - 0" 7' - 2" 1 3/4" HM 4 HM HM

----- 51

H2/A604 J2/A604 -----

134A Hydraulic Shop F 6' - 0" 7' - 2" 1 3/4" HM 4 HM HM ----- 16 H2/A604 J2/A604 -----

134B Hydraulic Shop OH-C (FR) 8' - 0" 10' - 0" 2" MT ----- ----- ----- 60 MIN ----- H5/A604 J5/A604 ----- OVERHEAD COILING DOOR

135A Testing Shop F 3' - 0" 7' - 2" 1 3/4" HM 2 HM HM ----- 43 H2/A604 J2/A604 -----

135B Testing Shop OH-C 8' - 0" 10' - 0" 2" MT ----- ----- ----- ----- ----- H4/A604 J4/A604 ----- OVERHEAD COILING DOOR

136 R&R Admin HG 3' - 0" 7' - 2" 1 3/4" WD 2 HM HM ----- 30 H2/A604 J2/A604 -----

137 R&R Office F 3' - 0" 7' - 2" 1 3/4" WD 1 HM HM ----- 22 H1/A604 J1/A604 -----

138 Hydraulic Admin HG 3' - 0" 7' - 2" 1 3/4" WD 2 HM HM ----- 30 H2/A604 J2/A604 -----

139 Hydraulic Office F 3' - 0" 7' - 2" 1 3/4" WD 1 HM HM ----- 22 H1/A604 J1/A604 -----

140 Break Room FG 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 45 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

141A Training NL 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 44 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

141B Training NLFR 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM 45 MIN 14 EXISTING EXISTING ----- ACCESS CONTROL W/ CARD READER

141C Training NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 43 H2/A604 J2/A604 -----

142 Accessories Superintendent Office

NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM

----- 21

H2/A604 J2/A604 -----

143 Fabrication Supervisor NL 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 21 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

144 Women's Toilet F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 27 H2/A604 J2/A604 -----

146 Mother's Room F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 28 H2/A604 J2/A604 -----

147 Men's Toilet F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 27 H2/A604 J2/A604 -----

148 Mens Locker F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 14 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

149 Storage F 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 46 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

150 Munitions F 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 46 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

151 Mechanical F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM ----- 46 H2/A604 J2/A604 -----

152A ISO NLFR 6' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD 45 MIN 15 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

152B Corridor F 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM ----- 13 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

153 Office NL 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 48 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

154 Office NL 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 48 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

155 Mech F 5' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD 45 MIN 47 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

156 IT F 3' - 0" 7' - 2" 1 3/4" HM EXISTING EXISTING PTD 45 MIN 59 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

157A AMU Open Office NLFR 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 19 H2/A604 J2/A604 ----- ACCESS CONTROL W/ CARD READER

157B AMU Open Office NL 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 43 H1/A604 J1/A604 -----

157D AMU Open Office NL 3' - 0" 7' - 0" 1 3/4" WD 1 HM HM 60 MIN 42 H1/A604 J1/A604 -----

158 Flight Chiefs NL 3' - 0" 7' - 0" 1 3/4" WD EXISTING EXISTING PTD ----- 30 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

159 Elevator Equip F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM 60 MIN 62 H2/A604 J2/A604 -----

160 Debrief FG 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 21 H2/A604 J2/A604 -----

161 Supply FG 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 37 H2/A604 J2/A604 -----

162 Women's F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 27 H2/A604 J2/A604 -----

163 Men's F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 27 H2/A604 J2/A604 -----

164 Janitor F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 34 H2/A604 J2/A604 -----

165 Secure Room F 3' - 0" 7' - 0" 1 3/4" HM EXISTING EXISTING PTD 45 MIN 60 EXISTING EXISTING ----- NEW DOOR AND HARDWARE IN EXISTING FRAME

166A Avionics NLFR 3' - 0" 7' - 0" 1 3/4" HM 2 HM HM 45 MIN 18 H3/A604 J3/A604 -----

166B Avionics F 3' - 0" 7' - 0" 1 3/4" WD 2 HM HM ----- 61 H2/A604 J2/A604 -----

I/R DATE DESCRIPTION