09 06 00.pdf

123796 - Phase 2 - Recapitalization of Building 20 Addendum 04 Watervliet Arsenal, Watervliet, New York

SECTION 09 06 00

SCHEDULES FOR FINISHES

05/09

PART 1 GENERAL

1.1 SUMMARY

This Section covers only the color of exterior and interior materials and products that are exposed to view in the finished construction. The word "color", as used herein, includes surface color and pattern. Requirements for quality, product specifications, and method of installation are covered in other appropriate sections of the Specifications. Specific locations where the various materials are required are shown on the Drawings if not identified in this Specification. Items not designated for color in this Section may be specified in other sections. When color is not designated for items, propose a color for approval.

PART 2 PRODUCTS

2.1 COLOR SCHEDULE

The color schedule information provided in the following paragraphs lists the colors, patterns and textures required for exterior and interior finishes, including both factory applied and field applied colors. Where color is shown as being specific to one manufacturer, an equivalent color by another manufacturer may be submitted for approval. Manufacturers and materials specified are not intended to limit the selection of equal colors from other manufacturers. In the case of difference between the Drawings and Specifications, colors identified in this Specification govern.

2.2 EXTERIOR FINISHES

Reference Drawings for manufacturer and color information.

2.2.1 Exterior Walls

Exterior wall colors apply to exterior wall surfaces including recesses at entrances and projecting vestibules. When applicable, paint conduit to closely match the adjacent surface color. Provide wall colors to match the colors listed below.

2.2.1.1 Brick

Match existing brick in size shape color and composition.

2.2.1.2 Mortar

Match existing mortar in size shape color and composition.

2.2.1.3 Glass and Glazing

Clear insulated units.

SECTION 09 06 00 Page 1

2.2.1.4 Paint

2.2.2 Exterior Trim

Provide exterior trim to match the colors listed below.

2.2.2.1 Steel Doors and Door Frames

Baked acrylic enamel finish, match color of Door 127, RAL 8007 or equal.

2.2.2.2 Aluminum Windows (mullion, muntin, sash, trim, and sill)

Anodized finish - Color: Dark bronze.

2.2.2.3 Fascia

2.2.2.4 Louvers

Match adjacent material in color.

2.2.2.5 Flashings

Match adjacent material in color.

2.2.2.6 Handrails

Galvanize.

2.2.2.7 Guardrails

Galvanize.

2.2.2.8 Caulking and Sealants

Match adjacent material in color.

2.2.2.9 Stringers and Stair Framing

Galvanize.

2.2.2.10 Control Joints

Match adjacent material in color.

2.2.2.11 Expansion Joint and/or Covers

Match adjacent material in color.

2.2.3 Exterior Roof

Apply roof color to exterior roof surfaces including sheet metal flashings and copings, snow guards, mechanical units, mechanical penthouses, roof trim, pipes, conduits, electrical appurtenances, and similar items.

Provide roof color to match the colors listed below.

2.2.3.1 EPDM

Black.

SECTION 09 06 00 Page 2

2.2.3.2 Penetrations

Match roof in color.

2.3 INTERIOR FINISHES

2.3.1 Interior Floor Finishes

Provide flooring materials to match the colors listed below.

2.3.1.1 Vinyl Composition Tile

RF-1: Armstrong Standard Excelon Tile 12 inches by 12 inches, Color: Field Gray 51927.

2.3.1.2 Resinous Flooring

RF-1: Tennant EPOXY FLAKE SR-HTS, Color: Field Gray 51927.

EF-1: Stonhard Stontec, Color: Santa Cruz.

EB-1: Stonhard Stontec, Color: Santa Cruz.

2.3.2 Interior Base Finishes

Provide base materials to match the colors listed below.

2.3.2.1 Resilient Base and Moldings

RB-1: Johnsonite Traditional Wall Base 4 inches H Cove, Color:

29 Moonrock.

EB-2: Johnsonite Traditional Wall Base 4 inches H Cove, Color:

Black.

2.3.3 Interior Wall Finishes

Apply interior wall color to the entire wall surface, including reveals, vertical furred spaces and columns, grilles, diffusers, electrical and access panels, and piping and conduit adjacent to wall surfaces unless otherwise specified. Paint items not specified in other paragraphs to match adjacent wall surface. Provide wall materials to match the colors listed below.

2.3.3.1 Paint

PA-1: Sherwin Williams SW7009 Pearly White.

PA-2: Sherwin Williams SW7019 Gauntlet Gray.

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

PA-4: Sherwin Williams SW70051 Analytical Gray.

PA-5: Sherwin Williams SW6108 Latte.

PE-1: Sherwin Williams SW7009 Pearly White.

SECTION 09 06 00 Page 3

2.3.3.2 Ceramic Tile ( Locat ed at Br eakr oom Backspl ashes)

TLC-1: American Olean Bright and Matte 6 inches by 6 inches, Color: Mushroom 0041 Bright and Matte.

2.3.3.3 Grout

GR-1: TEC Specialties Accucolor, Color: 909 Sterling.

2. 3. 3. 4 Por cel ai n Wal l Ti l e

TLP- 1: Dal t i l e For mul a unpol i shed, Col or : Equat i on Gr ey

TLP- 2: Dal t i l e For mul a unpol i shed, Col or I nt er sect i on Ant hr aci t e

2.3.4 Interior Ceiling Finishes

Apply ceiling colors to ceiling surfaces including soffits, furred down areas, grilles, diffusers, registers, and access panels. In addition, apply ceiling color to joists, underside of roof deck, and conduit and piping where joists and deck are exposed and required to be painted.

Provide ceiling materials to match the colors listed below.

2.3.4.1 Acoustical Tile and Grid

Manufacturer's Standard Color

ACT-1 Armstrong Fine Fissured #1749 with Armstrong Prelude 15/16 inch Grid, Color: White

ACT-2 Armstrong Fine Fissured #932 with Armstrong Prelude 15/16 inch Grid, Color: White.

2.3.4.2 Paint (Ceilings)

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

2.3.4.3 Paint (Soffits)

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

2.3.4.4 Metal Deck

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

2.3.4.5 Structural Framing

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

2.3.5 Interior Trim

Provide interior trim to match the colors listed below.

2.3.5.1 Steel Doors

Match color of Door 127, RAL 8007 or equal.

SECTION 09 06 00 Page 4

2.3.5.2 Steel Door Frames

Match color of Door 127, RAL 8007 or equal.

2.3.5.3 Handrails

Painted steel - Match color of Door 127, RAL 8007 or equal.

2.3.5.4 Guardrails

2.3.5.5 Metal Stairs; includes risers and underside of stairs

2.3.5.6 Exposed Ductwork

PA-3: Sherwin Williams SW7007 Ceiling Bright White.

2.3.6 Interior Window Treatment

Provide window treatments to match the colors listed below.

2.3.6.1 Vertical Blinds

Levolor Contract – 1 inch Horizontal Blinds, Style: Riviera RIV1C, 00885 Dark Bronze.

2.3.7 Interior Miscellaneous

Provide miscellaneous items to match the colors listed below.

2.3.7.1 Toilet Partitions and Urinal Screens

Baked enamel, Color: Selection from MFGER Standard color range.

2.3.7.2 Plastic Laminate

PLAM-1: Wilsonart Pewter Mesh 4878-38.

2.3.7.3 Solid Surfacing Material

SSF-1: Corian, Color: Linen.

2.3.7.4 Window Sills (Solid Surface)

SSF: Corian, Color: Linen.

2.3.7.5 Corner Guards

CG-1: Construction Specialties Stainless Steel, Finish #4 Satin.

2.3.7.6 Signage Message Color

White.

2.3.7.7 Signage Background Color

Black.

SECTION 09 06 00 Page 5

2.3.7.8 Lockers

DTC-1, Color selection from MFGER Standard color range.

2.3.7.9 Benches

Phenolic, Color selection from MFGER Standard color range.

2.3.7.10 Wall Switch Handles and Standard Receptacle Bodies

Gray.

2.3.7.11 Electrical Device Cover Plates

Stainless Steel, brushed.

2.3.7.12 Electrical Panels

Gray.

2.3.7.13 Shower Curtain

Curtain rod and hooks (white and stainless steel).

2.3.7.14 Shower Wall Kits, Trim and Shower Pan

White shower, with stainless steel grab bars and white accessories.

PART 3 EXECUTION

Not Used.

-- End of Section --

SECTION 09 06 00 Page 6