Attachment_0016_MEO_T1356D_W58RGZ-19-R-0050.pdf
PDF 898 KB Posted
- Attached to
- Solicitation for the Overhaul/Repair of the UH-60 Tail Rotor Blade with Pitch Horn Replacement
- Solicitation number
- W58RGZ-19-R-0050
About this file
Attachment_0016_MEO_T1356D_W58RGZ-19-R-0050.pdf
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
T1356D
Oct 22 2009 4
REQUEST FOR CONTRACTUAL WORK DEVIATION AND EXCEPTION
YES
NO
AGENX PPX
To establish a request procedure for specified contractual work that needs to be performed using deviations and exceptions. REVISION A: To update office symbols in paragraph 2. REVISION B: To add form AMSAT-M 1379. REVISION C: To update office symbols in paragraph 2. REVISION D: To update the Deviations and Exceptions paragraph and update office symbols.
James J. Kernan Humberto Hernandez Jr
These instructions are for use by contractor personnel. They apply to requests for work deviations and exceptions, and take precedence over similar procedures specified in an applicable Depot Maintenance Work Requirement (DMWR). Care must be taken to assure that all active AMCOM Engineering Directives (AEDs), which are now called Maintenance Engineering Orders (MEOs), relevant to the DMWR have been considered.
Assure that all active AMCOM Engineering Directives (AEDs) or Maintenance Engineering Orders (MEOs) relevant to the DMWR have been implemented. Deviations and/or exceptions take precedence over similar procedures specified in application of the DMWR. When any work segment as set forth in a DMWR cannot be accomplished or can be accomplished only in a manner other than specified, use the following procedures:
(AMCOM Reg 750-2)
W58RGZ-17-R-0237
Attachment 0016
2 4
1. Contractors: The contractor shall submit a Request for Depot Engineering Support (AMSRD-AMR Form 1379), located in the back of this manual through the Contracting Officer to RDMR-AEM with a copy to AMSAM-MAV UT for UH60 aircraft and components; to SFAE-AV-CH-L for CH47 aircraft and components; to AMSAM-MMC-AV-AB for AH64 aircraft and components; to AMSAM-MMC-AV-SOT for OH58 aircraft and components. The request shall state the problems, the reason for urgency, and give the specifics listed below:
A. Serial Number (SN) if applicable, Part Number (PN) and National Stock Number (NSN) of the affected equipment.
B. Work elements that will not be completed or will not be accomplished as specified herein.
C. Reason for non accomplishment or deviation.
D. Action taken to correct the condition causing non accomplishment or need for deviation.
E. Data relative to non availability of parts required, if applicable.
F. Estimated man-hours.
G. Instructions and inspections required to maintain the integrity of the end item having such omission or deviation.
The form will be returned with the technical guidance requested.
2. DoD Depots: The depot will use the Engineering Support System (ESS) located on the web at https://ess.amrdec.army.mil/ and submit a Maintenance Engineering Call (MEC). The MEC will be returned with the technical guidance requested."
ADD the AMSRD-AMR Form 1379 as shown on pages 3 and 4 of this MEO to the back of this manual after the DA FORM 2028.
(AMCOM reg 750-2)
3 4
AMSRD-AMR FORM 1379, 28 JAN 09
(AMCOM reg 750-2)
4 4
Continuation Sheet
AMSRD-AMR 1379, 28 JAN 09 (CONTINUATION SHEET)
(AMCOM reg 750-2)
File details come from the government source that posted it.