Attachment_0008_MEO_B1754A_W58RGZ-19-R-0050.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 5-DEC-09 1401-R-E

B 1754 Rev A

Jun 3, 2015 10

IUID Parts Marking for the Tail Rotor Blade P/Ns 70101-11200-044 and 70101-31000-043

Technical

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY

UH60 DAA

DMWR 1-1615-287, dtd 30 December 2011 TN 140396A 4/6/2015

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

Updated IUID Data Plate Marking with Wide Area Work Flow (WAWF) website, IUID Life Cycle Events (LCE), Parent-Child Relationship and Part Number Rollover requirements.

GRZELECKI.DAN

IEL.P.125929525

Digitally signed by

GRZELECKI.DANIEL.P.1259295250

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=GRZELECKI.DANIEL.P.1259295250 Date: 2015.05.29 09:45:10 -05'00'

NOLEN.OTIS.

F.1231157146

Digitally signed by

NOLEN.OTIS.F.1231157146

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=NOLEN.OTIS.F.1231157146 Date: 2015.04.06 11:16:19 -05'00'

Otis Nolen (Camber Corporation)

HORN.REINHOL

D.J.1087783495

Digitally signed by

HORN.REINHOLD.J.1087783495

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=HORN.REINHOLD.J.1087783495 Date: 2015.05.29 09:49:24 -05'00'

Daniel Grzelecki Ron Horn PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

v/(vi blank)

1-2

1-7.4.b

1-7.5

1-7.5.a

ADD Table "3-0 IUID Life Cycle Events" to the List of Tables.

DELETE paragraph "b" in its entirety.

REPLACE paragraph to read: "IUID Data Plate Fabrication (Figure 1-2). The IUID data plate is fabricated out of adhesive-backed black matte anodized aluminum material that meets the physical requirements per MIL-DTL-15024, Type L. The MRI and HRI shall be marked on the IUID data plate using Laser Etch (Table B-1), Metal Photo or other acceptable marking technique in accordance with MIL-STD-130."

REPLACE paragraph to read: "If the Tail Rotor Blade Assembly is not registered in the DoD IUID Registry as determined by paragraph 3-4.2 (regardless of how the component is marked) and/or the UII data and component data does not match that in the registry record, IUID data plates shall be fabricated in the format of Figure 1-2, Sheet 2 of 2, Option B."

Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211

MED FORM 18 NOV 2014

W58RGZ-17-R-0237

Attachment 0008

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

1-3

1-4

1-7.5.a.(1)

1-7.5.a.(2)

1-7.5.a.(3)

1-7.5.a.(3) (b), (c)

1-7.5.b.(1)

1-7.5.c.(1)

1-7.5.d

Set 2, Set 3

REPLACE paragraph to read: "A Construct 1 UII shall be encoded into a 2-D data matrix using TEIs SPL (supplier’s CAGE Code) and UCN (supplier’s Unique Component Number), IAW DoD Guide to Uniquely Identifying Items and/or MIL-STD-130 and register in the DoD IUID Registry via the Wide Area Work Flow (WAWF) (App A, Websites) or The Army Maintenance Management System – Aviation/Maintenance Consolidated Database System (TAMMS-A/MCDS), Unique Item Identification (UID) database (App A, Websites). The UII can be constructed by the overhaul/repair facility using the overhaul facility's Enterprise Identifier (CAGE) SPL and UCN or the overhaul facility can generate an UII via AMCOM’s TAMMS-A/MCDS, UID database at https://tamms-a.redstone.army.mil. The component's serially-managed manufacturer serial number shall not be used to develop the UII, but shall reside as HRI on the IUID data plate."

CHANGE paragraph last sentence to read: "The PNR is the component’s Sikorsky or Vendor (if applicable) part number upon completion of the M&O event."

CHANGE paragraph first sentence to read: "The component shall be registered in the DoD IUID Registry via the WAWF (App A, Websites) in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html." and DELETE "in the DoD IUID Registry (App A)" at end of paragraph.

CHANGE Set 2 and Set 3 "(if marked on the component and/or component original nameplate)." to read "(if marked on the component and/or component original identification data plate)."

CHANGE paragraph last sentence to read: "The component’s manufacturer serial number from the original identification data plate shall reside as HRI on the IUID data plate."

REPLACE paragraph to read: "The recorded UII (paragraph 3-4.2) shall be encoded into an ECC 200 compliant 2-D data matrix. M&O of the component shall not change the UII. For Option B: The component’s manufacturer serial number from the original identification data plate shall reside as HRI on the IUID data plate.

REPLACE paragraph to read: "If the Tail Rotor Blade Assembly has a compliant IUID data plate; the UII is registered in the DoD IUID Registry and the registry record data matches the component data (paragraph 3-4.2); the IUID data plate is undamaged; no data changes are required; the IUID data plate can be reapplied to the component on which it was found at PSA, provided the MRI meets the verification requirement for minimum print quality grade per MIL-STD-130. If the 2-D data matrix does not meet the minimum grade requirements, replacement IUID data plate shall be fabricated in the format of Figure 1-2, Sheet 2 of 2, Options A or B, whichever is applicable."

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

1-7

1-8

3-1

1-7.5.d

1-7.6

3-4.2

Warning

CHANGE paragraph "d" to read "e".

CHANGE "(Table B-1, whichever is applicable to the DMWR)" to read "(Table B-1)".

REPLACE Isopropyl alcohol warning to read:

"WARNING

Isopropyl alcohol is flammable and toxic to eyes, skin, and respiratory tract.

Wear protective gloves and goggles/face shield. Avoid repeated or prolonged contact. Use only in well ventilated areas (or use approved respirator as determined by local safety/industrial hygiene personnel). Keep away from open flames, sparks, or other sources of ignition."

REPLACE Figure 1-2, Sheet 1 of 2 with new figure found on page 8 of this MEO.

REPLACE Figure 1-2, Sheet 2 of 2 with new figure found on page 9 of this MEO.

REPLACE heading and sub-paragraphs as follows:

"3-4.2. DOD IUID REGISTRY QUERY. The DoD IUID Registry and/or AMCOM’s TAMMS-A/MCDS, UID database shall be queried to determine if the component has been assigned a UII.

NOTE

Do not remove IUID data plates unless necessitated by damage, maintenance requirements or determination that the item does not meet the criteria below.

NOTE

Protect the IUID data plates that remains on the item during cleaning, maintenance processes and painting.

NOTE

If the Tail Rotor Blade Assembly arrives with an IUID data plate other than what is depicted in Figure 1-2 of 1-3, contact cognizant AMRDEC engineering or contracting officer (COR) for replacement instructions.

a. Inspect the Tail Rotor Blade Assembly for the presence of a 2-D data matrix via an IUID data plate (Figure 1-2), or other IUID label media. If present, use a handheld data matrix reader (Table B-1) or an equivalent to scan the 2-D data matrices. If the scan is successful, proceed to paragraph 3-4.2.d.(1) and/or 3-4.2.e.(1). If the scan is not successful after two attempts, proceed to paragraph 3-4.2.b.

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

WARNING

Isopropyl alcohol is flammable and toxic to eyes, skin, and respiratory tract.

Wear protective gloves and goggles/face shield. Avoid repeated or prolonged contact. Use only in well ventilated areas (or use approved respirator as determined by local safety/industrial hygiene personnel). Keep away from open flames, sparks, or other sources of ignition.

b. Clean the 2-D data matrices with a cloth (App C, item 103) moistened with isopropyl alcohol (App C, item 89) and scan again. If the third scan is successful, proceed to paragraph 3-4.2.d or 3-4.2.e. If the third scan is not successful, use the HRI to query the DoD IUID Registry (paragraph 3-4.2.d.(2)) and/or TAMMS-A/MCDS, UID database (paragraph 3-4.2.e.(2)).

c. If neither OPM IUID Label nor IUID data plates are present (only an original identification data plate), query the DoD IUID Registry (paragraph 3-4.2.d.(2)) and/or TAMMS-A/MCDS, UID database (paragraph 3-4.2.e.(2)).

d. Query the DoD IUID Registry via WAWF (App A, Websites) as follows:

(1) DoD IUID Registry home page, select “Queries”, then “Single Item Query” and place the scanned/recorded UII data into the “UII*” field. If the query returns a record, proceed to paragraph 3-4.2.f. If the query does not return a record proceed to 3-4.2.d.(2) below.

(2) Using the human readable manufacturer serial number on the component (indicated by Serial No., Ser No., S/N, SN, SER, (S), SEQ, etc.), query the DoD IUID Registry. Select “Queries,” then “Pedigree Query.” Place the human readable manufacturer serial number in the “Serial Number” field. If a registry record’s data matches the component data exactly, proceed to paragraph 3-4.2.f.

If no registry record can be matched exactly to the component data, proceed to paragraph 3-4.2.d.(3) below.

(3) Using the human readable manufacturer serial number on the component (indicated by Serial No., Ser No., S/N, SN, SER, (S), SEQ, etc.), query the DoD IUID Registry. Select “Queries,” then “Mark Query.” Place “SERIAL NUMBER” in the “Mark Content” field and place the human readable manufacturer serial number (as visible on component, minus any spaces) in the “Mark Value” field. If a registry record’s data matches the component data exactly, proceed to paragraph 3-4.2.f. If no registry record can be matched exactly to the component data, indicate on local documents that the component was not found in the DoD IUID Registry (i.e., did not have a registered UII). A new IUID data plates shall be fabricated IAW paragraph 1-7.5.

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

3-2

3-4.3 thru 3-4.5

e. Query the TAMMS-A/MCDS, UID database (App A, Websites) as follows:

(1) TAMMS-A/MCDS home page, select ‘’’Apps”, then “UID” from the drop down menu, and place the scanned/recorded UII data into the “UII” field. If the query returns a record, proceed to paragraph 3-4.2.f. If the query does not return a record proceed to 3-4.2.e.(2) below.

(2) Using the human readable manufacturer serial number on the component (indicated by Serial No., Ser No., S/N, SN, SER, (S), SEQ, etc.) query the TAMMS-A/MCDS, UID database by placing the serial number in the “SER” field.

The query may return multiple records. Use the additional data from the component (component description, part number, etc.) to determine if one of the database records can be matched to the component. If a database record matches the component data exactly, proceed to paragraph 3-4.2.f. If no database record can be matched exactly to the component data, (i.e., did not have a registered UII), IUID data plates shall be fabricated IAW paragraph 1-7.5.

f. Record Data.

(1) Ensure the data in the DoD IUID Registry and/or TAMMS-A/MCDS, UID database record matches the component data (resident on the Tail Rotor Blade Assembly or within its accompanying historical records). If all data matches, record all pertinent component data required to fabricate the IUID data plate (UII Data Elements, Sikorsky or Vendor PN (if applicable) and all other data requirements resident on the component and/or in the registry record). It is necessary that all recorded data be matched to the same end item, assembly, or component on which they were found during PSA.

(2) If the data in the DoD IUID Registry and/or TAMMS-A/MCDS, UID database record does not match the component data, IUID data plates shall be fabricated IAW paragraph 1-7.5."

ADD the following paragraphs to read:

"3-4.3. IUID LIFECYCLE EVENTS (LCE)

A life cycle event specific to UID compliance is any change to the permanent status of an item i.e., lost, stolen, destroyed…, that the DOD Guide to Uniquely Identifying Items requires be reported to the DOD IUID registry. If applicable, report to the DoD IUID Registry via the WAWF (App A, Websites) or the TAMMS-A/MCDS, UID database at https://tamms-a.redstone.army.mil, the item’s change of permanent status if one of the following life cycle events in Table 3-0 occur.

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

A-1

A-3/(A-4 blank)

A-4

A-7

3-0

3-4.4. IUID PARENT CHILD RELATIONSHIP

A parent item is an assembly, intermediate component or subassembly that has an embedded item with a Unique Item Identifier (UII) or DoD recognized UII equivalent. If applicable, upon completion of the M&O event, report component parent child relationship updates to the DoD IUID Registry via the WAWF (App A, Websites) or the TAMMS-A/MCDS, UID database at https://tamms-a.redstone.army.mil, in accordance with DoD Guide to Uniquely Identifying Items.

3-4.5. PART NUMBER CONFIGURATION CHANGE

If required, upon completion of the M&O event, the component part number configuration changes (part number roll/dash number change) that would require an addition or update of the PNR or 30P (current part number), the configuration change shall be reported to the DoD IUID Registry via the WAWF (App A, Websites) or the TAMMS-A/MCDS, UID database at https://tamms-a.redstone.army.mil."

ADD Table 3-0 with figure on page 10 of this MEO.

SEPARATE "AS9132 (R) . . . . Data Matrix Quality Requirements for Parts Marking DoDI 5000.64: Defense Property Accountability" to read:

"SAE AS9132 . . . . (R) Data Matrix Quality Requirements for Parts Marking

"DoDI 5000.64 . . . . Department of Defense Instruction Accountability and Management of DoD Equipment and Other Accountable Property"

CHANGE "ISO 1534" to read "ISO 15434"

REPLACE Websites to read:

"DPAP UID . . . . Defense Procurement and Acquisition Policy http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html

WAWF . . . . Wide Area Work Flow e-Business Suite https://wawf.eb.mil/

TAMMS-A/MCDS . . . . The Army Maintenance Management System – Aviation/Maintenance Consolidated Database System https://tamms-a.redstone.army.mil"

MED FORM 18 NOV 2014

B 1754 Rev A

3-2

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

B-1

C-7/(C-8 blank)

App C

B-1 CHANGE Reverence Paragraph of use for the following:

"Nomenclature: Epilog, HELIX - 45 watt, CO2* Mini Laser Marking System Reverence Paragraph of Use: 1-7.5

Reader, MS-Q Handheld* Reverence Paragraph of Use: 1-7.6.g, 3-4.2.a

CHANGE Item Number 120 Description and U/M to read:

"Description: Foam Brush (82626), Pitman Co. INC., Brush Size 1 inch or equivalent

U/M: BX"

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

MED FORM 15-DEC-09 1401-R-E

NOTES:

1. If the item arrives without a registered UII, IUID data plates shall be fabricated in the format of

Option B.

2. If the item arrives without an IUID data plate and has a registered UII, the UII shall be replicated using the DoD IUID Registry data. The HRI displayed on the IUID data plate shall be in the format of Option A or B, as applicable.

3. If the item arrives with a registered UII on a compliant IUID data plate (Option A or Option B), the IUID data plate shall be replicated (to configuration/format at PSA) when replacement is necessary due to damage and/or change to component data and/or configuration change e.g., part number roll (dash number change).

4. Option A: (30P) or PNR application is only utilized/installed when the original part number (1P) or PNO changes with a new configuration, i.e. part number roll (dash number change).

(30P) or PNR 70101-31000-XXX

OPTION A (see note 4)

(17V) or CAG 78286 (1P) or PNO 70101-31000-XXX

(S) or SEQ A009-XXXXX

OPTION B

SPL XXXXX

UCN XXXXXXXXXXXXX

SERIAL NO. A009-XXXXX

PNR 70101-31000-XXX

Figure 1-2. Tail Rotor Blade Assembly IUID Data Plates (Sheet 1 of 2)

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

MED FORM 15-DEC-09 1401-R-E

NOTES:

1. All Dimensions in inches. Drawing not to scale.

2. Font lettering and size per MIL-STD-130. Font locations are approximate.

3. Physical characteristics and test requirements per MIL-DTL-15024, Type L.

4. Material: Black matte anodizes aluminum .003 to .005 thickness, with 9485PC adhesive tape

(3M) or equivalent. Black anodizes plates shall be completely coated with clear polyurethane per MIL-PRF-85285 or equivalent and extend a minimum of 1/4- inch around the edges.

5. The 2-D data matrix symbol shall be ECC 200 compliant in accordance with ISO/IEC 16022.

6. Quiet Zone (Free Space) around the 2-D data matrix code shall be .050 MIN. in all directions.

7. Marking edge distance to be a minimum of .060.

8. The recommended part mark size for the 2-D Data Matrix symbol is 0.25 to 0.50 inch square.

The 2-D data matrix symbol shall not be larger that 1.00 inch square.

9. Option A: 2-D data matrix encoded with a Construct 2 UII using DIs or TEIs (17V) or CAG

(manufacturer’ CAGE Code), (1P) or PNO (manufacturer’s original part number) and (S) or SEQ (manufacturer’s serial number).

10. Option B: 2-D data matrix encoded with a Construct 1 UII using TEIs SPL (supplier’s CAGE code) and UCN (supplier’s unique component number).

Manufacturer’s serial number from the original identification data plate or from the accompanying documentation. Displayed as HRI only (not encoded in the 2-D data matrix).

The 2-D data matrix to contain Sikorsky’s or Vendor’s (if applicable) Tail Rotor Blade Assembly part number upon completion of the M&O event.

13. Option A: (30P) or PNR application is only utilized/installed when the original part number (1P) or PNO changes with a new configuration, i.e. part number roll (dash number change).

R. 09

4 PLS

(30P) or PNR 70411-31000-XXX

1.50

.50

OPTION A or B

R. 09

4 PLS

SPL XXXXX

UCN XXXXXXXXXXXXX

SERIAL NO. A009-XXXXX

1.50

OPTION B OPTION A

(17V) or CAG 78286 (1P) or PNO 70411-31000-XXX

(S) or SEQ A009-XXXXX

1.50

.50 .50

Figure 1-2. Tail Rotor Blade Assembly IUID Data Plates (Sheet 2 of 2)

MED FORM 18 NOV 2014

B 1754 Rev A

Continuation Sheet

MEO NO.

PAGE of

MED FORM 15-DEC-09 1401-R-E

Table 3-0. IUID Life Cycle

IUID LIFE CYCLE EVENT (LCE)

Event Definition

Abandoned

Property surrendered by a Federal agency after a written determination that the property has no commercial value, or the estimated cost of its continued care and handling would exceed the estimated proceeds from its sale. An item has not commercial value when it has neither utility or monetary value (either as useable property or as scrap)

Consumed Non-reversibly incorporated into another item Destroyed – Accident

Destroyed during a fire, natural disaster, or other unplanned natural or man-made incident

Destroyed – Combat Destroyed by the enemy during combat

Donated

Surplus property provided to a Service Educational Activity; a State, political subdivision, municipality, or tax-supported institution acting on behalf of a public airport; a public agency; a public body; a charitable institution; or any State or local government agency, and certain nonprofit organizations or institutions

Exchanged – Sold Provided to a supplier for credit Exchanged – Repair Provided to a supplier for an equivalent replacement part

Exchanged – Warranty

Provided to a supplier for an equivalent replacement part or credit while under warranty

Expended – Normal Use

Such as in the firing of a missile during combat or consumed during a manufacturing process

Expended – Experimental/Target

Such as the firing of a missile during training exercises and for testing; items destroyed while serving as a target during training exercises and tests

Leased Property that is granted to a lessee for a period of time in exchange for rent or other consideration

Loaned Owned by a DoD component and loaned to contractors, scientific institutions or other organizations

Lost Property that cannot be located or otherwise accounted for Reintroduced When an item is returned to DoD service

Retired Withdrawn from normal service; taken out of use. Includes decommissioned, stricken, sunken, transferred to AMARC/DRMS, etc.; excludes temporary idling of the item

Scrapped Waste material that will not be reused or reprocessed Sold – Other Federal

Title transferred to non-DoD Federal Agencies with compensation

Sold – State/Local Title transferred to non-Federal governmental entities with compensation

Sold – Foreign Govt.

Title transferred to non-US governmental entities with compensation

Sold – Non-Govt. Title transferred to non-governmental entities such as churches, organizations, etc. with compensation

Sold – Historic Title transferred to a museum or similar entity with compensation

Stolen Lost via theft

MED FORM 18 NOV 2014

B 1754 Rev A