Attachment_54_-_Force_Structure_Worksheet.xlsx
XLSX spreadsheet 33 KB Posted
- Attached to
- Mobile Protected Firepower
- Solicitation number
- W56HZV18R0001
About this file
Attachment 54 - Force Structure Worksheet
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Title Page
UNCLASSIFIED
| Attachment 54 |
| Force Structure Worksheet |
15-Dec-2017
DISTRIBUTION STATEMENT A: Approved for Public Release; distribution unlimited.
Distribution A only applies when form is not filled-in. Once completed reference the MPF Security Classification Guide for proper distribution statement/markings.
Other requests for this document shall be referred to the attention of the PM MPF Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-P, 6501 East Eleven Mile Road, Warren, MI 48397-5000.
| "This document contains information that may be exempt from mandatory disclosure under the Freedom of Information Act." |
| UNCLASSIFIED |
Instructions
Instructions for completing this attachment
Contractor are instructed to fill out the Force Structure Worksheet Tab per Section H.9.5.2 and the specific cell instructions below.
Contractor shall use the Referenced Technical Manual provided as GFI to determine the capabilities of the associated wrecker and if that capability is sufficient to perform the applicable recovery and material handling tasks per Column B. Contractor shall input Yes/No under the wrecker title for each task. Should a contractor input Yes, data substantiating the claim shall be referenced in the applicable columns and supplied. Contractors shall use ATP 4-31/MCRP 4-11.4A (Aug 2014) as the basis of the recovery scenarios per the definitions below. All tasks shall be accomplished with one wrecker unless otherwise stipulated below.
| Task Definitions: |
| Flat towing: Flat tow the MPF using the method outlined section 3-20 Flat Tow. Assume hard ground, no more than 1% grade. |
Recovery of overturned MPF: Recover the overturned MPF using the method outlined in Section 3-66. Assume the MPF is on its side and use the overturn resistance calculation per Section 2-56.
Recover a mired MPF (up to hub): Recover an MPF mired up to the hub using the method outlined in Sections 3-93 through 3-96. Assume the resistance calculations per Sections 2-58, block and tackle is permissible if available per the wreckers BII.
Recover a mired MPF (over hub): Recover an MPF mired over the hub up to the fender using the method outlined in Sections 3-93 through 3-96. Assume the resistance calculations per Sections 2-29, block and tackle is permissible if available per the wreckers BII.
Lifting and removing the power pack: Lift and remove the power pack from the MPF.
Lifting and removing the turret assembly: Lift and remove the turret assembly from the MPF.
Lifting and removing armor panels: Lift and remove all armor panel sections/recipes from the MPF.
UNCLASSIFIED
Force Structure Worksheet
| Existing IBCT Asset | Yes | |
| Applicable Tasks | FRS |
(LIN F64544)
Ref TM 9-4940-568-10 Substantiating Data M984A4 HEMTT Wrecker
(LIN T63161)
Ref TM 9-2320-342-10-1 Substantiating Data FMTV Wrecker
(LIN T94671)
| Ref TM 9-2320-334-10-1 | Substantiating Data | No | ||
| Recovery Tasks | ||||
| N/A | ||||
| Flat towing | ||||
| Recovery of overturned MPF | ||||
| Recover a Mired MPF (up to hub) | ||||
| Recover a Mired MPF (over hub) | ||||
| Material Handling Tasks | ||||
| Lifting & removing the power pack | ||||
| Lifting & removing the turret assembly | ||||
| Lifting & removing armor panels |
File details come from the government source that posted it.