Attachment 47 - CARC Paint Drawing.pdf

UNCLASSIFIED: Distribution Statement A. Approved for public release; distribution is unlimited.

UNCLASSIFIED: Distribution Statement A. Approved for public release; distribution is unlimited.

APPLICATION REVISIONS

NEXT ASSY USED ON LTR DESCRIPTION DATE APPROVED

- PRODUCT BASELINE ERR TACW2372 14-07-21 D. NYMBERG

REVISIONS TO ALIGN WITH MIL-DTL-53072 15-06-30 D. NYMBERG

NOTES: APPLICABLE STANDARDS/SPECIFICATIONS: DRAWINGS SHALL COMPLY WITH ASME Y14.100

1. FINISH

A. CLEAN, PRETREAT, PRIME, AND TOPCOAT WITH CHEMICAL AGENT RESISTANT COATING SYSTEM IN ACCORDANCE WITH

MIL-DTL-53072 PER MIL-STD-171.

B. PRETREATMENT COATING WEIGHT (IF APPLICABLE), THICKNESS, ADHESION, SALT SPRAY, AND SOLVENT WIPE TESTING

SHALL BE PERFORMED AS SPECIFIED IN TT-C-490 AND MIL-DTL-53072

C. CARC PRIMER SHALL MEET OR EXCEED 1000 HRS SALT SPRAY PERFORMANCE PER MIL-DTL-53072 D. COATING THICKNESS MEASUREMENTS SHALL MEET MIL-DTL-53072 ABOVE SUBSTRATE SURFACE PEAK BLAST PROFILE E. FOR BLASTED SURFACE PROFILE <30% OF TARGET COATING THICKNESS, TAKE 3 READINGS PER MEASUREMENT SITE F. FOR BLASTED SURFACE PROFILE >30% OF TARGET COATING THICKNESS, TAKE 5 READINGS PER MEASUREMENT SITE

G. MINIMUM 3 MEASUREMENTS PER SITE

H. UNLESS SPECIFIED OTHERWISE IN THE CONTRACT, MEASURE COATING THICKNESS BASED ON MATERIEL SURFACE AREA:

i. SMALL PARTS/COMPONENTS - ONE MEASUREMENT SITE MINIMUM PER 100 SQ IN OF COATED AREA

ii. LARGE PARTS/COMPONENTS - FOUR MEASUREMENT SITES MINIMUM PER 100 SQ FT OF COATED AREA

I. COATING THICKNESS MEASUREMENT SYSTEM SHALL HAVE <30% GAGE ERROR PER ASTM F1469 - TWO OPERATORS MINIMUM

J. HEXAVALENT CHROMIUM CONTAINING MATERIALS ARE PROHIBITED

K. COAT THE ENTIRE PART UNLESS SPECIFIED OTHERWISE ON THE PART DRAWING OR IN THE CONTRACT

2. COLORS SHALL MEET FED-STD-595. COMMON COLORS INCLUDE, BUT ARE NOT LIMITED TO:

COLOR CHIP # COLOR CHIP # COLOR CHIP # COLOR CHIP #

TAN 33531 SEAFOAM GREEN INTERIOR 24533 DARK SANDSTONE 33510 AIRCRAFT GREEN 34031

GRAY 26081 GLOSS WHITE INTERIOR 17925 SEMI-GLOSS WHITE INTER. 27875 AIRCRAFT BLACK 37038

SAND 33303 BLUE GRAY 35237 BULKHEAD MACHINERY GRAY 26307 AIRCRAFT WHITE 37875

BLACK 37030 FIELD DRAB 33105 IRR FOLIAGE GREEN 504 34160 AIRCRAFT YELLOW 33538

TAN 686A 33446 DARK GREEN 34082 WOODLAND DESERT SAGE 34201 AIRCRAFT INSIGNIA BLUE 35044 BROWN 383 30051 OLIVE DRAB 34088 WEAPONS SAFETY RED 38905 AIRCRAFT GRAY INTERIOR 36231

GREEN 383 34094 MEDIUM GRAY 36375 AIRCRAFT RED 31136 AIRCRAFT BLACK INTER. 37031

GREEN 808 34102 EARTH YELLOW 33245 AIRCRAFT GRAY 36300 DEFINED IN CONTRACT

3. EXAMPLE FINISH NOTATIONS FOR PART DRAWINGS –

FINISH: COAT PER 12585018 USING FINISHES 5.1.1 PLUS 20.24 OF MIL-STD-171

FINISH: COAT PER 12585018 USING FINISHES 5.5.1 PLUS 20.24 OF MIL-DTL-STD-171

4. THIS DRAWING REPLACES CARC PAINT DRAWINGS 12507474, AND 12369000 THROUGH 12369023, INCLUSIVE

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE PART NO. 12585018

PMIC A CONTRACT NUMBER

N/A

CONTRACTOR

N/A

U.S. ARMY TANK – AUTOMOTIVE AND

ARMAMENTS COMMAND

WARREN, MICHIGAN 48397-5000

UNLESS OTHERWISE

SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES ON

2 PLACE 3PLACE

CHEMICAL AGENT RESISTANT

COATING SYSTEMS FOR

EXTERIOR AND INTERIOR

ARMY MATERIEL

DRAWN BY

DATE (YR-MO-

DA)

15-07-01

CHECKER

ENGINEER

D. NYMBERG

DRAWING APPROVAL

P. CHERUKURI

SIZE

A

CAGE CODE

19207

DWG NO.

12585018

MATL ENGR

D. NYMBERG

DESIGN APPROVAL

SCALE NONE UNIT WT SHEET 1 OF 1

(YR-MO-DA)

STA FORM 910

4 OCT 95

PREVIOUS EDITIONS

MAY BE USED UNCLASSIF IED

UNCLASSIF IED

Atachment 47