Attachment 0003 - TDP Option Selection Worksheet.docx

UNCLASSIFIED

Attachment 0003

TDP Option Selection Worksheet

11 March 2016

Distribution Statement A – Approved for Public Release; distribution unlimited

TDP OPTION SELECTION WORKSHEET

SYSTEM: Family of Medium Tactical Vehicles (FMTV) DATE PREPARED: 11 March 2016

A. CONTRACT NO.

B. EXHIBIT/ATTACHMENT NO.

Attachment 3

C. CLIN

D. CDRL DATA

ITEM NO(s) B001

1. TDP LIFECYCLE LEVEL (CHOOSE ONLY ONE PER WORKSHEET) Note: The level selected must coincide with the requirements of the elements selected in Block 5.

A. ☐ CONCEPTUAL LEVEL

☐ DEVELOPMENTAL LEVEL

☒ PRODUCTION LEVEL

B. REMARKS:

2. DELIVERABLE DATA PRODUCTS (X ALL THAT APPLY AND COMPLETE AS APPLICABLE)

☐ OTHER FORMAT (SPECIFY)_________________________________

B. 3D MODELS:

☐ 3D Digital MODELS ONLY ☒ 3D Digital MODELS

W/ ASSOCIATED 2D

DRAWINGS

☒ NATIVE CAD (Specify level of annotation)_See Attachment 7 for Detailed Requirements_____________________________________ ☐ MODEL ORGANIZATION SCHEMA (Specify Appendix B or other)_______ ☐ NEUTRAL FORMAT (SPECIFY, e.g., ISO 10303 APxxx)____________________ ☐ OTHER FORMAT (SPECIFY, e.g., 3D PDF, JT)_________________________

C. ☐ METADATA

(Specify in Section 9) ☐ ASCII TEXT-PIPE DELIMITED ☐ ISO 10303 (SPECIFY, e.g., APxxx & DEX) ____

☐ JEDMICS (DLF) ☐ OTHER FORMAT (SPECIFY)________

D. ☒ ASSOCIATED

LISTS (See Sect 7)

☒ NATIVE FORMAT ☒ ISO 32000 PDF ☐ HARD COPY

☐ OTHER FORMAT (SPECIFY)_________________________________

NEUTRAL (SPECIFY e.g., STEP AP238, 240, DEX, Other)_____________ OTHER (SPECIFY e.g., PDF)____________________________________

☒ GOVERNMENT CAGE (COMPLETE 3B, 3C, and 3D)

B. USE CAGE CODE:

19207

C. USE DOCUMENT NUMBERS:

As provided by the Government

D. TO BE ASSIGNED BY:

PdM-MTV

4. DRAWING FORMATS (X ONE AND COMPLETE AS APPLICABLE)

☐ CONTRACTOR FORMAT ☒ GOVERNMENT FORMAT

REMARKS: Drawing size/sheets to be IAW ASME 14.1. Drawing formats and templates provided by the Government.

5. TDP ELEMENTS AND ASSOCIATED DATA REQUIRED (X ALL THAT APPLY)

☐ CONCEPTUAL DESIGN DRAWINGS/MODELS

☐ DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

☒ PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS

☒ SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS, MODELS AND ASSOCIATED LISTS

☒ SPECIAL TOOLING (ST) DRAWINGS, MODELS AND ASSOCIATED LISTS

☒ SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS, MODELS AND ASSOCIATED LISTS

☐ SPECIFICATIONS AND/OR STANDARDS (SPECIFY)________________________________________

☒ SOFTWARE DOCUMENTATION (SPECIFY) _____________________________________________

☒ QUALITY ASSURANCE PROVISIONS (QAP) SPECIFY)______________________________________ ☐ METADATA (SPECIFY)______________________________________________________________ ☐ SUPPLEMENTARY TECHNICAL DATA (SPECIFY)__________________________________________

6. TDP DATA MANAGEMENT PRODUCTS

☒ SOURCE CONTROL DRAWING (SOCD) APPROVAL REQUEST

☒ DRAWING NUMBER ASSIGNMENT REPORT

☐ PROPOSED CRITICAL MANUFACTURING PROCESS DESCRIPTION

7. ASSOCIATED LISTS (X AND COMPLETE AS APPLICABLE)

8. APPLICABILITY OF STANDARDS. THE FOLLOWING STANDARDS APPLY: (X AS APPLICABLE)

☒ ASME Y14.100

ENGINEERING DRAWING

PRACTICES

WITH APPENDICES:

☒ B ☒ C ☒ D ☒ E

☒ ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS

☒ ASME Y14.34 ASSOCIATED LIST

☒ ASME Y14.35M REVISION OF ENGINEERING

DRAWINGS AND ASSOCIATED LIST

☒ ASME Y14.41 DIGITAL PRODUCT DEFINITION

DATA PRACTICES

☒ ASME Y14.5 DIMENSIONING AND

TOLERANCING

☐ OTHER STANDARDS

APPLY AS DESCRIBED:

COMPANY STANDARDS PERMITTED

☐ YES ☒ NO

9. OTHER TAILORING (ATTACH ADDITIONAL SHEETS AS NECESSARY)

1. APPLICATION DATA. Application data is required on all drawings. General use or multi-use notations are allowed. Examples: FMTVA1P2, FMTVA2, M1078A2, M1083A2, etc.

2. DRAWING DETAIL. Multi-detail is encouraged for inseparable assemblies. Mono-detail and tabulated drawings are permitted.

3. DIMENSIONING AND TOLERANCING. Dimensioning and tolerancing shall be IAW ASME Y14.5, latest revision, for new drawings and indicated in Drawing Note 1. Metric and decimal values are permitted. Dual dimensioning is not permitted on a single drawing without Government approval.

4. DRAWING NOTES. Drawing notes shall be on the top left corner of the drawing, beginning with Note 1 at the top and proceeding down the page in numerical order.

5. MULTI SHEET DRAWING REVISIONS. Multi-sheet drawings are revised with the revision letter applying to the complete document rather than the individual sheet. All sheets of a multi-sheet drawing contain the same revision letter and are affected as each revision advances. Models shall contain the same revision letter as the drawing.

6. REDRAWN DRAWINGS. Redrawn drawings require Government Approval and are advanced one revision level.

7. REVISION HISTORY. Maintain revision history in its entirety in accordance with ASME Y14.35.

8. ADDING SHEETS. Adding sheets will be performed in accordance with ASME Y14.35.

9. DELETING SHEETS. Deleting sheets will be performed in accordance with ASME Y14.35.

10. MARKINGS ON ENGINEERING DRAWINGS. For special items/processes apply notations using approved symbols and special notes (i.e. hexagon (hex) symbol and corresponding hex note).

11. ASSOCIATED LISTS. Separate part lists are not permitted. Parts lists shall be integral to the drawing. Lists are not required to be in tabular format. Find number parts lists are permitted and preferred.

12. ANGLE OF PROJECTION. All drawings shall use third angle projection unless otherwise approved by the Government. If approval is given, the angle of projection shall be noted in the title block.

13. DISTRIBUTION STATEMENT AND EXPORT CONTROL WARNINGS. The proper Distribution Statement and any applicable Export Control Warnings (ITAR, etc.) shall be applied to the drawing. Selection of the proper Distribution Statement and Export Control Warnings is subject to Government approval.

14. MATERIAL. The part material(s) shall be defined in a note on each drawing and shall utilize applicable military or industry specifications and standards.

TDP OPTION SELECTION WORKSHEET

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS

SYSTEM: Family of Medium Tactical Vehicles (FMTV) DATE PREPARED: 11 March 2016

1. CONTRACT NO.

1. EXHIBIT/ATTACHMENT NO.

Attachment 3

1. CLIN

1. CDRL DATA

ITEM NO(s) B001

1. DELIVERABLE DATA PRODUCTS (X ALL THAT APPLY AND COMPLETE AS APPLICABLE)

☐ OTHER FORMAT (SPECIFY)_______________________________

1. 3D DIGITAL MODELS:

☐ 3D DIGITAL MODELS

ONLY

☒ 3D DIGITAL MODELS

W/ ASSOCIATED 2D

DRAWINGS

☒ NATIVE CAD

☐ NEUTRAL FORMAT (SPECIFY, e.g., ISO 10303 APxxx)__________________

☐ OTHER FORMAT (SPECIFY)_________________________________

1. ☐ METADATA

(Specify in Section 2) ☐ ASCII TEXT-PIPE DELIMITED ☐ ISO 10303 STEP (SPECIFY, e.g., APxxx, DEX) __

☐ JEDMICS (DLF) ☐ OTHER FORMAT (SPECIFY)__________

1. ☐ ASSOCIATED

LISTS

☐ NATIVE FORMAT ☐ ISO 32000 PDF ☐ HARD COPY

☐ OTHER FORMAT (SPECIFY)_________________________________

1. OTHER TAILORING (ATTACH ADDITIONAL SHEETS AS NECESSARY)

If native CAD is in a format other than the required PTC Creo Parametric format, the neutral part file shall be imported into the Creo Parametric start part to maintain all appropriate and required attributes and information. Refer to Attachment 7 specified in the Scope of Work for additional detailed requirements.

FIGURE 2: TDP Option Selection Worksheet

FIGURE 2: TDP Option Selection Worksheet