09_ITEM 01.2-10_ADD 02_Section 09 06 00.pdf

ANG/WI - F-35: 3-Bay Specialized Hangar 20202700F353BAY Addendum No. 02 8 June 2022

SECTION 09 06 00

SCHEDULES FOR FINISHES

05/ 09, CHG 1: 11/ 13

PART 1 GENERAL

1.1 SUMMARY

This section covers only the color of exterior and interior materials and products that are exposed to view in the finished construction. The word "color", as used herein, includes surface color and pattern. Requirements for quality, product specifications, and method of installation are covered in other appropriate sections of the specifications. Specific locations where the various materials are required are shown on the drawings if not identified in this specification. Items not designated for color in this section may be specified in other sections. When color is not designated for items, propose a color for approval.

PART 2 PRODUCTS

2.1 COLOR SCHEDULE

The color schedule information provided in the following paragraphs lists the colors, patterns and textures required for exterior and interior finishes, including both factory applied and field applied colors. Where color is shown as being specific to one manufacturer, an equivalent color by another manufacturer may be submitted for approval. Manufacturers and materials specified are not intended to limit the selection of equal colors from other manufacturers. In the case of difference between the drawings and specifications, colors identified in this specification govern.

2.2 EXTERIOR FINISHES

2.2.1 Exterior Walls

Exterior wall colors apply to exterior wall surfaces including recesses at entrances and projecting vestibules. When applicable, paint conduit to closely match the adjacent surface color. Provide wall colors to match the colors listed below.

2.2.1.1 Mortar

Provide selection from standard colors.

2.2.1.2 Concrete Masonry Units (Rock/Split-Faced)

Basis of Design: Dolese, "Dark Chocolate."

2.2.1.3 Metal Wall Panels, Hardware, and Associated Trim

Basis of Design: Centria - Color #1: "Sandstone;" Color #2:

"Surrey Beige."

SECTION 09 06 00 Page 1

2.2.1.4 Insulation and Finish System

To match Sherwin Williams, "Sandstone."

2.2.1.5 Precast Stone

Basis of Design: Advanced Architectural Stone - "Surrey Beige."

2.2.2 Exterior Trim

Provide exterior trim to match the colors listed below.

2.2.2.1 Steel Doors and Door Frames

Sherwin Williams, "Architectural Brown."

2.2.2.2 Aluminum Doors and Door Frames

To be selected from manufacturer's standard colors.

2.2.2.3 Aluminum Windows (mullion, muntin, sash, trim, and sill)

To be selected from manufacturer's standard colors.

2.2.2.4 Overhangs

To match Sherwin Williams, "Chocolate Brown."

2.2.2.5 Downspouts and Gutters

To match Sherwin Williams, "Chocolate Brown."

2.2.2.6 Louvers

Match adjacent material in color.

2.2.2.7 Flashings

Match adjacent material in color.

2.2.2.8 Coping

To match Sherwin Williams, "Chocolate Brown."

2.2.2.9 Caulking and Sealants

Match adjacent material in color.

2.2.2.10 Bollards

Safety yellow.

2.2.2.11 Sun Shades

To match Sherwin Williams, "Chocolate Brown."

2.2.2.12 Control Joints

Match adjacent material in color.

SECTION 09 06 00 Page 2

2.2.2.13 Expansion Joint and/or Covers

Match adjacent material in color.

2.2.3 Exterior Roof

Apply roof color to exterior roof surfaces including sheet metal flashings and copings, snow guards, mechanical units, mechanical penthouses, roof trim, pipes, conduits, electrical appurtenances, and similar items.

Provide roof color to match the colors listed below.

2.2.3.1 TPO

White.

2.3 INTERIOR FINISHES

2.3.1 Interior Floor Finishes

Provide flooring materials to match the colors referenced in drawings .

PART 3 EXECUTION

Not Used

-- End of Section --

SECTION 09 06 00 Page 3

THIS PAGE INTENTIONALLY LEFT BLANK

SECTION 09 06 00 Page 4