ATT_0025_MAGNUM_SPIKE_STRIP_TSP.pdf

US ARMY RDECOM-ARDEC RDAR-EIL-LT, BLDG #68

PICATINNY ARSENAL, NJ

07806-5000

Anthony Bryant

Training Instructor

Munitions New Equipment Training and Media Production Branch

COM (973) 724-8744

DSN (312) 880-8744

BB (201) 787-8360

FAX (973) 724-5089

Ultimate Magnum Spike Strip

ENTRY CONTROL POINT

Terminal Learning Objective

(TLO)

ACTION

CONDUCT ENTRY CONTROL POINT

OPERATIONS UTILIZING THE ENTRY

CONTROL POINT KIT

CONDITION

IN A CLASSROOM PRESENTATION AND OR FIELD ENVIRONMENT GIVEN

A MAGNUM SPIKE STRIP, A DESIGNATED DEPLOYMENT AREA, MINIMUM

TWO PERSONNEL, PROTECTIVE HEADGEAR, I.B.A., LOW-BEARING

EQUIPMENT, WEAPON, AND TM 5-5340-101-10

STANDARD

DEMONSTRATE A WORKING KNOWLEDGE OF

OPERATIONAL EQUIPMENT FOR SUSTAINMENT

TRAINING AND FOLLOW ON REAL WORLD MISSIONS.

DEPLOY MAGNUM SPIKE STRIP WITHOUT ERROR IAW

TM 5-5340-101-10

SAFETY CONSIDERATIONS

The spikes on the Magnum Spike Strip System, are sharp and may cause injury to personnel.

Caution must be used when handling the spike system.

Gloves must be worn when replacing the spikes.

The protective spike cap must be installed on a spike prior to handling the spike.

RISK ASSESSMENT

LOW

ENVIRONMENTAL

CONSIDERATIONS

IT IS THE RESPONSIBILITY OF ALL SOLDIERS AND DA

CIVILIANS TO PROTECT THE ENVIRONMENT FROM DAMAGE.

BASED ON ITS COMMITMENT TO ENVIRONMENTAL

PROTECTION, THE ARMY WILL CONDUCT ITS OPERATIONS IN

WAYS THAT MINIMIZE ENVIRONMENTAL IMPACTS. THE ARMY

WILL COMPLY WITH ALL ENVIRONMENTAL LAWS AND

REGULATIONS. THIS INCLUDES FEDERAL, STATE, LOCAL,

AND HOST NATION LAWS, SOME OF WHICH ARE OUTLINED IN

TC 3-34.489, THE SOLDIER AND THE ENVIRONMENT, 26 OCT

2001, APPENDIX B.

There are no unique environment considerations for this period of instruction

EVALUATIONS

THERE WILL BE NO EVALUATION FOR

THIS PERIOD OF INSTRUCTION. ONLY

HANDS ON TRAINING. AND CHECKS

ON LEARNING

INSTRUCTIONAL LEAD-IN

The Ultimate Magnum Spike System (UMS-16) utilizes 160 uniquely designed spikes configured in rows along a 16 foot mat. It is designed for large air escape and engineered to stop and cut up all types and sizes of tires including run-flats.

ENABLING LEARNING OBJECTIVE

(ELO)

Lesson #1

ACTION

CONDUCT POWER POINT AND HANDS ON FAMILIARIZATION OF THE

Magnum Spike Strip

CONDITIONS AND STANDARDS ARE THE

SAME AS PREVIOUSLY STATED

The Ultimate Magnum Spike System (UMS-16) comes in a carrying case that deploys 160 uniquely designed spikes configured in rows along a 16 foot mat.

The system comes with 45 feet of deployment cord on a reel with press button release and quick rewind. Spikes are designed for large air escape and engineered to stop and cut up all types and sizes of tires including run-flats.

Clog proof spikes will withstand multiple high speed impacts. Included are

50 replacement spikes with holder retainers that can be changed in the field with no tools required.

• Ultimate Magnum Spike System Mat

(Rolled) Spike system in portable rolled position.

• Instruction booklet.

• Storage case Used to store spike system and accessories.

• Reel Retracts spike system.

• Protective Glove Used for protection when handling spike system.

• Magnum Spike System Mat

(Unrolled) Holds the spikes used to puncture tires and stop vehicles.

• Spare Spikes For individual spike replacement.

OPERATOR

DESCRIPTION AND USE OF CONTROLS

AND INDICATORS

Release/ Rewind Handle

Releases and rewinds 45-foot cord to help place spike strip in designated area.

REPLACING SPIKES

1. Place the protective glove on a hand.

2. Remove the damaged spike by removing the locking pin at the base of the spike. Then, grasping the spike with the gloved hand, pull up on the spike and remove it from the retaining hole.

NOTE

The damaged spike and locking pin should be discarded in accordance with the local Standing

Operating Procedure (SOP).

3. Holding the replacement spike with the gloved hand, place the spike into the retaining hole.

4. Line up the hole in bottom of the spike with the hole in the retaining hole

5. Insert the locking pin through the retaining hole and the spike to secure the spike. Rotate the locking pin until it locks into

Setting Up Ultimate Magnum

Spike System Using Line Kit

1) Remove rolled-up spike system from zippered storage bag. Set bag aside.

2) Place rolled-up spike system on ground, with security strap closer to designated area.

3) Release fastener straps on spike roll.

4) Still holding carrying handle, simultaneously release security

Strap and toss the spike roll away from body and in to the designated location. The mat will roll open.

Setting Up Ultimate Magnum

Spike System Using Line Kit:

5) Connect the provided hook on the end of the line kit to the hole on the end of the spike system, closest to the designated area.

6) Walking away from spike system across designated area, deploy 45 foot wire from the line kit.

7) When ready to deploy, yank hard on line kit to pull spike system across stopping area.

OPERATOR

TROUBLESHOOTING PROCEDURES

There are no troubleshooting procedures for the spike system.

PREVENTIVE MAINTENANCE CHECKS

AND SERVICES FOR SPIKE SYSTEM

QUESTIONS ?

CHECK ON LEARNING

Terminal Learning Objective

(TLO)

ACTION

CONDUCT ENTRY CONTROL POINT

OPERATIONS UTILIZING THE ENTRY

CONTROL POINT KIT

Magnum Spike Strip

REVIEW/SUMMARIZE LESSON