SF 330 Architect Engineer Qualifications.pdf

PURPOSE

Federal agencies use this form to obtain information from architect-engineer (A-E) firms about their professional qualifications. Federal agencies select firms for A-E contracts on the basis of professional qualifications as required by 40 U.S.C.

chapter 11, Selection of Architects Engineers, and Part 36 of the Federal Acquisition Regulation (FAR).

The Selection of Architects and Engineers statute requires the public announcement of requirements for A-E services (with some exceptions provided by other statutes), and the selection of at least three of the most highly qualified firms based on demonstrated competence and professional qualifications according to specific criteria published in the announcement.

The Act then requires the negotiation of a contract at a fair and reasonable price starting first with the most highly qualified firm.

The information used to evaluate firms is from this form and other sources, including performance evaluations, any additional data requested by the agency, and interviews with the most highly qualified firms and their references.

GENERAL INSTRUCTIONS

Part I presents the qualifications for a specific contract.

Part II presents the general qualifications of a firm or a specific branch office of a firm. Part II has two uses:

1. An A-E firm may submit Part II to the appropriate central, regional or local office of each Federal agency to be kept on file.

A public announcement is not required for certain contracts, and agencies may use Part II as a basis for selecting at least three of the most highly qualified firms for discussions prior to requesting submission of Part I. Firms are encouraged to update Part II on file with agency offices, as appropriate, according to FAR Part

36. If a firm has branch offices, submit a separate Part II for each branch office seeking work.

2. Prepare a separate Part II for each firm that will be part of the team proposed for a specific contract and submitted with Part I. If a firm has branch offices, submit a separate Part II for each branch office that has a key role on the team.

INDIVIDUAL AGENCY INSTRUCTIONS

Individual agencies may supplement these instructions. For example, they may limit the number of projects or number of pages submitted in Part I in response to a public announcement for a particular project. Carefully comply with any agency instructions when preparing and submitting this form. Be as concise as possible and provide only the information requested by the agency.

DEFINITIONS

Architect-Engineer Services: Defined in FAR 2.101.

Branch Office: A geographically distinct place of business or subsidiary office of a firm that has a key role on the team.

Discipline: Primary technical capabilities of key personnel, as evidenced by academic degree, professional registration, certification, and/or extensive experience.

Firm: Defined in FAR 36.102.

Key Personnel: Individuals who will have major contract responsibilities and/or provide unusual or unique expertise.

SPECIFIC INSTRUCTIONS

Part I - Contract-Specific Qualifications

Section A. Contract Information.

1. Title and Location. Enter the title and location of the contract for which this form is being submitted, exactly as shown in the public announcement or agency request.

2. Public Notice Date. Enter the posted date of the agency's notice on the Federal Business Opportunity website (SAM.gov), other form of public announcement or agency request for this contract.

3. Solicitation or Project Number. Enter the agency's solicitation number and/or project number, if applicable, exactly as shown in the public announcement or agency request for this contract.

Section B. Architect-Engineer Point of Contact.

4-8. Name, Title, Name of Firm, Telephone Number, Fax

(Facsimile) Number and E-mail (Electronic Mail) Address.

Provide information for a representative of the prime contractor or joint venture that the agency can contact for additional information.

ARCHITECT-ENGINEER QUALIFICATIONS

Section C. Proposed Team.

Complete this section for each key person who will participate in this contract.

Current Professional Registration. Provide information on current relevant professional registration(s) in a State or possession of the United States, Puerto Rico, or the District of Columbia according to FAR Part 36.

Other Professional Qualifications. Provide information on any other professional qualifications relating to this contract, such as education, professional registration, publications, organizational memberships, certifications, training, awards, and foreign language capabilities.

Relevant Projects. Provide information on up to three projects in which the person had a significant role that demonstrates the person's capability relevant to her/his proposed role in this contract. These projects do not necessarily have to be any of the projects presented in Section F for the project team if the person was not involved in any of those projects or the person worked on other projects that were more relevant than the team projects in Section F. Use the check box provided to indicate if the project was performed with any office of the current firm. If any of the professional services or construction projects are not complete, leave Year Completed blank and indicate the status in Brief Description and Specific Role (block (3)).

Section F. Example Projects Which Best Illustrate Proposed

Team's Qualifications for this Contract.

Select projects where multiple team members worked together, if possible, that demonstrate the team's capability to perform work similar to that required for this contract.

Complete one Section F for each project. Present ten projects, unless otherwise specified by the agency.

Complete the following blocks for each project:

Example Project Key Number. Start with "1" for the first project and number consecutively.

Title and Location. Title and location of project or contract. For an indefinite delivery contract, the location is the geographic scope of the contract.

Year Completed. Enter the year completed of the professional services (such as planning, engineering study, design, or surveying), and/or the year completed of construction, if applicable. If any of the professional services or the construction projects are not complete, leave Year Completed blank and indicate the status in Brief Description of Project and Relevance to this Contract (block 24).

Brief Description of Project and Relevance to this Contract.

Indicate scope, size, cost, principal elements and special features of the project. Discuss the relevance of the example project to this contract. Enter any other information requested by the agency for each example project.

Firms from Section C Involved with this Project. Indicate which firms (or branch offices, if appropriate) on the project team were involved in the example project, and their roles.

List in the same order as Section C.

Section G. Key Personnel Participation in Example Projects.

This matrix is intended to graphically depict which key personnel identified in Section E worked on the example projects listed in Section F. Complete the following blocks (see example below).

Names of Key Personnel and Role in this Contract. List the names of the key personnel and their proposed roles in this contract in the same order as they appear in Section E.

Example Projects Listed in Section F. In the column under each project key number (see block 29) and for each key person, place an "X" under the project key number for participation in the same or similar role.

Example Projects Key. List the key numbers and titles of the example projects in the same order as they appear in Section F.

Section H. Additional Information.

Use this section to provide additional information specifically requested by the agency or to address selection criteria that are not covered by the information provided in Sections A-G.

Section I. Authorized Representative.

Signature of Authorized Representative and Date. An authorized representative of a joint venture or the prime contractor must sign and date the completed form. Signing attests that the information provided is current and factual, and that all firms on the proposed team agree to work on the project. Joint ventures selected for negotiations must make available a statement of participation by a principal of each member of the joint venture.

Name and Title. Self-explanatory.

Example Projects Key. List the key numbers and titles of the example projects in the same order as they appear in Section F.

Section H. Additional Information.

Use this section to provide additional information specifically requested by the agency or to address selection criteria that are not covered by the information provided in Sections A-G.

Section I. Authorized Representative.

Signature of Authorized Representative and Date. An authorized representative of a joint venture or the prime contractor must sign and date the completed form. Signing attests that the information provided is current and factual, and that all firms on the proposed team agree to work on the project. Joint ventures selected for negotiations must make available a statement of participation by a principal of each member of the joint venture.

Name and Title. Self-explanatory.

SAMPLE ENTRIES FOR SECTION G (MATRIX)

26. NAMES OF KEY

PERSONNEL

(From Section E, Block 12)

27. ROLE IN THIS

CONTRACT

(From Section E, Block 13)

28. EXAMPLE PROJECTS LISTED IN SECTION F

(Fill in "Example Projects Key" section below first, before completing table. Place "X" under project key number for participation in same or similar role.)

1 2 3 4 5 6 7 8 9 10

Jane A. Smith

Chief Architect

X

Joseph B. Williams

Chief Mechanical Engineer

X X X X

Tara C. Donovan Chief Electricial Engineer X X

a. EXAMPLE PROJECTS KEY

N UMBER TITLE OF EXAMPLE PROJECT (From Section F) NUMBER TITLE OF EXAMPLE PROJECT (From Section F)

1 Federal Courthouse, Denver, CO 6 XYZ Corporation Headquarters, Boston, MA

2 Justin J. Wilson Federal Building, Baton Rouge, LA

7 Founder's Museum, Newport, RI

Part II - General Qualifications

See the "General Instructions" on page 1 for firms with branch offices. Prepare Part II for the specific branch office seeking work if the firm has branch offices.

1. Solicitation Number. If Part II is submitted for a specific contract, insert the agency's solicitation number and/or project number, if applicable, exactly as shown in the public announcement or agency request.

2a-2e. Firm (or Branch Office) Name and Address. Self-explanatory.

3. Year Established. Enter the year the firm (or branch office, if appropriate) was established under the current name.

4. Unique Entity Identifier. Insert the unique entity identifier issued by the entity designated at SAM. See FAR part 4.6.

5. Ownership.

a. Type. Enter the type of ownership or legal structure of the firm (sole proprietor, partnership, corporation, joint venture, etc.).

b. Small Business Status. Refer to the North American

Industry Classification System (NAICS) code in the public announcement, and indicate if the firm is a small business according to the current size standard for that NAICS code (for example, Engineering Services (part of NAICS 541330), Architectural Services (NAICS 541310), Surveying and Mapping Services (NAICS 541370)). The small business categories and the internet website for the NAICS codes appear in FAR part 19.

Contact the requesting agency for any questions. Contact your local U.S. Small Business Administration office for any questions regarding Business Status.

6a-6c. Point of Contact. Provide this information for a representative of the firm that the agency can contact for additional information. The representative must be empowered to speak on contractual and policy matters.

7. Name of Firm. Enter the name of the firm if Part II is prepared for a branch office.

8a-8c. Former Firm Names. Indicate any other previous names for the firm (or branch office) during the last six years.

Insert the year that this corporate name change was effective and the associated unique entity identifier. This information is used to review past performance on Federal contracts.

9. Employees by Discipline. Use the relevant disciplines and associated function codes shown at the end of these instructions and list in the same numerical order. After the listed disciplines, write in any additional disciplines and leave the function code blank. List no more than 20 disciplines. Group remaining employees under "Other Employees" in column b. Each person can be counted only once according to his/her primary function.

If Part II is prepared for a firm (including all branch offices), enter the number of employees by disciplines in column c(1). If Part II is prepared for a branch office, enter the number of employees by discipline in column c(2) and for the firm in column c(1).

10. Profile of Firm's Experience and Annual Average

Revenue for Last 5 Years. Complete this block for the firm or branch office for which this Part II is prepared. Enter the experience categories which most accurately reflect the firm's technical capabilities and project experience. Use the relevant experience categories and associated profile codes shown at the end of these instructions, and list in the same numerical order.

After the listed experience categories, write in any unlisted relevant project experience categories and leave the profile codes blank. For each type of experience, enter the appropriate revenue index number to reflect the professional services revenues received annually (averaged over the last 5 years) by the firm or branch office for performing that type of work. A particular project may be identified with one experience category or it may be broken into components, as best reflects the capabilities and types of work performed by the firm. However, do not double count the revenues received on a particular project.

11. Annual Average Professional Services Revenues of Firm for Last 3 Years. Complete this block for the firm or branch office for which this Part II is prepared. Enter the appropriate revenue index numbers to reflect the professional services revenues received annually (averaged over the last 3 years) by the firm or branch office. Indicate Federal work (performed directly for the Federal Government, either as the prime contractor or subcontractor), non-Federal work (all other domestic and foreign work, including Federally-assisted projects), and the total.

12. Authorized Representative. An authorized representative of the firm or branch office must sign and date the completed form. Signing attests that the information provided is current and factual. Provide the name and title of the authorized representative who signed the form.

List of Disciplines (Function Codes)

Code Description Code Description

01 Acoustical Engineer 32 Hydraulic Engineer 02 Administrative 33 Hydrographic Surveyor 03 Aerial Photographer 34 Hydrologist 04 Aeronautical Engineer 35 Industrial Engineer 05 Archeologist 36 Industrial Hygienist 06 Architect 37 Interior Designer 07 Biologist 38 Land Surveyor 08 CADD Technician 39 Landscape Architect 09 Cartographer 40 Materials Engineer 10 Chemical Engineer 41 Materials Handling Engineer 11 Chemist 42 Mechanical Engineer 12 Civil Engineer 43 Mining Engineer 13 Communications Engineer 44 Oceanographer 14 Computer Programmer 45 Photo Interpreter 15 Construction Inspector 46 Photogrammetrist 16 Construction Manager 47 Planner: Urban/Regional 17 Corrosion Engineer 48 Project Manager 18 Cost Engineer/Estimator 49 Remote Sensing Specialist 19 Ecologist 50 Risk Assessor 20 Economist 51 Safety/Occupational Health Engineer 21 Electrical Engineer 52 Sanitary Engineer 22 Electronics Engineer 53 Scheduler 23 Environmental Engineer 54 Security Specialist 24 Environmental Scientist 55 Soils Engineer 25 Fire Protection Engineer 56 Specifications Writer 26 Forensic Engineer 57 Structural Engineer 27 Foundation/Geotechnical Engineer 58 Technician/Analyst 28 Geodetic Surveyor 59 Toxicologist 29 Geographic Information System Specialist 60 Transportation Engineer 30 Geologist 61 Value Engineer 31 Health Facility Planner 62 Water Resources Engineer

STANDARD FORM 330 (REV. 7/2021)

PAGE 6 OF INSTRUCTIONS

List of Experience Categories (Profile Codes)

A01 A02

A03 A04 A05 A06 A07 A08 A09 A10 A11 A12

B01 B02

C01 C02 C03 C04 C05 C06 C07 C08 C09 C10 C11 C12 C13 C14 C15 C16 C17 C18

C19

D01 D02 D03 D04 D05 D06 D07 D08

Acoustics, Noise Abatement Aerial Photography; Airborne Data and Imagery Collection and Analysis Agricultural Development; Grain Storage; Farm Mechanization Air Pollution Control Airports; Navaids; Airport Lighting; Aircraft Fueling Airports; Terminals and Hangars; Freight Handling Arctic Facilities Animal Facilities Anti-Terrorism/Force Protection Asbestos Abatement Auditoriums & Theaters Automation; Controls; Instrumentation

Barracks; Dormitories Bridges

Cartography Cemeteries (Planning & Relocation) Charting: Nautical and Aeronautical Chemical Processing & Storage Child Care/Development Facilities Churches; Chapels Coastal Engineering Codes; Standards; Ordinances Cold Storage; Refrigeration and Fast Freeze Commercial Building (low rise) ; Shopping Centers Community Facilities Communications Systems; TV; Microwave Computer Facilities; Computer Service Conservation and Resource Management Construction Management Construction Surveying Corrosion Control; Cathodic Protection; Electrolysis Cost Estimating; Cost Engineering and Analysis; Parametric Costing; Forecasting Cryogenic Facilities

Dams (Concrete; Arch) Dams (Earth; Rock); Dikes; Levees Desalinization (Process & Facilities) Design-Build - Preparation of Requests for Proposals Digital Elevation and Terrain Model Development Digital Orthophotography Dining Halls; Clubs; Restaurants Dredging Studies and Design

E01 E02 E03 E04 E05 E06 E07 E08 E09

E10

E11 E12 E13

F01 F02 F03 F04 F05 F06

G01

G02

G03

G04

G05

G06

H01

H02 H03

H04 H05 H06 H07

H08 H09 H10 H11

H12 H13

Ecological & Archeological Investigations Educational Facilities; Classrooms Electrical Studies and Design Electronics Elevators; Escalators; People-Movers Embassies and Chanceries Energy Conservation; New Energy Sources Engineering Economics Environmental Impact Studies, Assessments or Statements Environmental and Natural Resource Mapping Environmental Planning Environmental Remediation Environmental Testing and Analysis

Fallout Shelters; Blast-Resistant Design Field Houses; Gyms; Stadiums Fire Protection Fisheries; Fish ladders Forensic Engineering Forestry & Forest products

Garages; Vehicle Maintenance Facilities;

Parking Decks

Gas Systems (Propane; Natural, Etc.)

Geodetic Surveying: Ground and Air-borne

Geographic Information System Services:

Development, Analysis, and Data Collection

Geospatial Data Conversion: Scanning, Digitizing, Compilation, Attributing, Scribing, Drafting Graphic Design

Harbors; Jetties; Piers, Ship Terminal Facilities Hazardous Materials Handling and Storage Hazardous, Toxic, Radioactive Waste Remediation Heating; Ventilating; Air Conditioning Health Systems Planning Highrise; Air-Rights-Type Buildings Highways; Streets; Airfield Paving; Parking Lots Historical Preservation Hospital & Medical Facilities Hotels; Motels Housing (Residential, Multi-Family;

Apartments; Condominiums) Hydraulics & Pneumatics Hydrographic Surveying

List of Experience Categories (Profile Codes continued)

I01

I02

I03

I04

I05

I06

J01

L01

L02

L03

L04

L05

L06

M01

M02

M03

M04

M05

M06

M07

M08

N01

N02

N03

O01 O02 O03

P01

P02

P03

P04

P05

P06

P07

P08

Industrial Buildings; Manufacturing Plants

Industrial Processes; Quality Control

Industrial Waste Treatment

Intelligent Transportation Systems

Interior Design; Space Planning

Irrigation; Drainage

Judicial and Courtroom Facilities

Laboratories; Medical Research Facilities

Land Surveying

Landscape Architecture

Libraries; Museums; Galleries

Lighting (Interior; Display; Theater, Etc.)

Lighting (Exteriors; Streets; Memorials;

Athletic Fields, Etc.)

Mapping Location/Addressing Systems

Materials Handling Systems; Conveyors; Sorters

Metallurgy

Microclimatology; Tropical Engineering

Military Design Standards

Mining & Mineralogy

Missile Facilities (Silos; Fuels; Transport)

Modular Systems Design; Pre-Fabricated Structures or Components

Naval Architecture; Off-Shore Platforms

Navigation Structures; Locks

Nuclear Facilities; Nuclear Shielding

Office Buildings; Industrial Parks Oceanographic Engineering Ordnance; Munitions; Special Weapons

Petroleum Exploration; Refining

Petroleum and Fuel (Storage and Distribution)

Photogrammetry

Pipelines (Cross-Country - Liquid & Gas)

Planning (Community, Regional, Areawide and State)

Planning (Site, Installation, and Project)

Plumbing & Piping Design

Prisons & Correctional Facilities

P09

P10

P11

P12

P13

R01

R02

R03

R04

R05

R06

R07

R08

R09

R10

R11

R12

S01

S02

S03

S04

S05

S06

S07

S08

S09

S10

S11

S12

S13

T01

T02 T03 T04 T05 T06

Product, Machine Equipment Design

Pneumatic Structures, Air-Support Buildings

Postal Facilities

Power Generation, Transmission, Distribution

Public Safety Facilities

Radar; Sonar; Radio & Radar Telescopes

Radio Frequency Systems & Shieldings

Railroad; Rapid Transit

Recreation Facilities (Parks, Marinas, Etc.)

Refrigeration Plants/Systems

Rehabilitation (Buildings; Structures; Facilities)

Remote Sensing

Research Facilities

Resources Recovery; Recycling

Risk Analysis

Rivers; Canals; Waterways; Flood Control

Roofing

Safety Engineering; Accident Studies; OSHA Studies

Security Systems; Intruder & Smoke Detection

Seismic Designs & Studies

Sewage Collection, Treatment and Disposal

Soils & Geologic Studies; Foundations

Solar Energy Utilization

Solid Wastes; Incineration; Landfill

Special Environments; Clean Rooms, Etc.

Structural Design; Special Structures

Surveying; Platting; Mapping; Flood Plain Studies

Sustainable Design

Swimming Pools

Storm Water Handling & Facilities

Telephone Systems (Rural; Mobile; Intercom, Etc.)

Testing & Inspection Services Traffic & Transportation Engineering Topographic Surveying and Mapping Towers (Self-Supporting & Guyed Systems) Tunnels & Subways

List of Experience Categories (Profile Codes continued)

Code Description U01 Unexploded Ordnance Remediation

U02 Urban Renewals; Community Development

U03 Utilities (Gas and Steam)

V01 Value Analysis; Life-Cycle Costing

W01 Warehouses & Depots

W02 Water Resources; Hydrology; Ground Water

W03 Water Supply; Treatment and Distribution

W04 Wind Tunnels; Research/Testing Facilities Design

Z01 Zoning; Land Use Studies

ARCHITECT-ENGINEER QUALIFICATIONS

PART I - CONTRACT-SPECIFIC QUALIFICATIONS

A. CONTRACT INFORMATION

1. TITLE AND LOCATION (City and State)

B. ARCHITECT-ENGINEER POINT OF CONTACT

4. NAME AND TITLE

5. NAME OF FIRM

6. TELEPHONE NUMBER 7. FAX NUMBER 8. E-MAIL ADDRESS

C. PROPOSED TEAM

(Complete this section for the prime contractor and all key subcontractors.)

(Check)

9. FIRM NAME

10. ADDRESS

11. ROLE IN THIS CONTRACT

PR

IM

E J-

V

PA

R

TN

ER

SU

BC

O N

TR

AC

TO

R a.

CHECK IF BRANCH OFFICE

b.

c.

D. ORGANIZATIONAL CHART OF PROPOSED TEAM (Attached)

18. OTHER PROFESSIONAL QUALIFICATIONS (Publications, Organizations, Training, Awards, etc.)

2. PUBLIC NOTICE DATE 3. SOLICITATION OR PROJECT NUMBER

19. RELEVANT PROJECTS

(1) TITLE AND LOCATION (City and State) (2) YEAR COMPLETED PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE Check if project performed with current firm

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE Check if project performed with current firm

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE Check if project performed with current firm d.

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE Check if project performed with current firm

F. EXAMPLE PROJECTS WHICH BEST ILLUSTRATE PROPOSED TEAM'S

QUALIFICATIONS FOR THIS CONTRACT

(Present as many projects as requested by the agency, or 10 projects, if not specified.

Complete one Section F for each project.)

20. EXAMPLE PROJECT KEY

NUMBER

21. TITLE AND LOCATION (City and State) 22. YEAR COMPLETED

23. PROJECT OWNER'S INFORMATION

a. PROJECT OWNER b. POINT OF CONTACT NAME c. POINT OF CONTACT TELEPHONE NUMBER

24. BRIEF DESCRIPTION OF PROJECT AND RELEVANCE TO THIS CONTRACT (Include scope, size, and cost)

25. FIRMS FROM SECTION C INVOLVED WITH THIS PROJECT

(1) FIRM NAME (2) FIRM LOCATION (City and State) (3) ROLE

(1) FIRM NAME (2) FIRM LOCATION (City and State) (3) ROLE

(1) FIRM NAME (2) FIRM LOCATION ( and State) (3) ROLE

G. KEY PERSONNEL PARTICIPATION IN EXAMPLE PROJECTS

26. NAMES OF KEY

PERSONNEL

(From Section E, Block 12)

27. ROLE IN THIS

CONTRACT

(From Section E, Block 13)

28. EXAMPLE PROJECTS LISTED IN SECTION F

(Fill in "Example Projects Key" section below before completing table.

Place "X" under project key number for participation in same or similar role.)

1 2 3 4 5 6 7 8 9 10

N

UMBER TITLE OF EXAMPLE PROJECT (From Section F) NUMBER TITLE OF EXAMPLE PROJECT (From Section F)

H. ADDITIONAL INFORMATION

b. PROVIDE ANY ADDITIONAL INFORMATION REQUESTED BY THE AGENCY. ATTACH ADDITIONAL SHEETS AS NEEDED.

AUTHORIZED REPRESENTATIVE

The foregoing is a statement of facts.

33. NAME AND TITLE

PART II - GENERAL QUALIFICATIONS

(If a firm has branch offices, complete for each specific branch office seeking work.)

2a. FIRM (or Branch Office) NAME 3. YEAR ESTABLISHED 4. UNIQUE ENTITY IDENTIFIER

2b. STREET 5. OWNERSHIP

a. TYPE

2c. CITY 2d. STATE 2e. ZIP CODE

b. SMALL BUSINESS STATUS 6a. POINT OF CONTACT NAME AND TITLE

7. NAME OF FIRM (If Block 2a is a Branch Office)

6b. TELEPHONE NUMBER 6c. EMAIL ADDRESS

8a. FORMER FIRM NAME(S) (If any) 8b. YEAR ESTABLISHED 8c. UNIQUE ENTITY IDENTIFIER

9. EMPLOYEES BY DISCIPLINE 10. PROFILE OF FIRM'S EXPERIENCE

a. Function Code b. Discipline

c. Number of Employees a. Profile Code b. Experience

(1) FIRM (2) BRANCH

Other Employees

Total

12. AUTHORIZED REPRESENTATIVE

The foregoing is a statement of facts.

c. NAME AND TITLE

1. SOLICITATION NUMBER (If any)

ARCHITECT-ENGINEER QUALIFICATIONS

31. SIGNATURE 32. DATE

a. SIGNATURE b. DATE