S02 - ATCH 10 - 9) Infection Control Risk Assessment.pdf
PDF 256 KB Posted
- Solicitation number
- 36C77623B0049
About this file
This document is an Infection Control Risk Assessment for a construction project to expand parking at the Joliet Community Based Outpatient Clinic. The project involves work in all areas of the clinic from December 2023 through November 2024.
The assessment establishes four construction activity types - A through D - involving different levels of dust and four corresponding infection control risk groups. It provides a matrix to determine the appropriate project class based on the construction activity type and risk group of the area. Higher project classes involve more stringent infection control procedures. Class I requires basic precautions while Class IV, for work in highest risk areas like operating rooms, necessitates additional measures including terminal cleaning inside and outside containment barriers.
The document outlines specific infection control actions required for each project class, covering containment, barriers, ventilation, personal protective equipment, cleaning and waste removal procedures. Signatures are required from the contractor, project planner and infection control personnel to acknowledge the assessment. The related federal contract opportunity was cancelled for the parking expansion construction work at the Joliet CBOC to be performed under the infection control guidelines provided in the risk assessment.
View the file
Other files
Show 40 more
Latest 50 of 57 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Infection Control Risk Assessment for Construction / Renovation Projects Project Name: Parking Expansion at Joliet CBOC Project or Work-Order Number: 578-371
Project Manager or COR: Aaron Walsh Extension: 21152
Building Number: Joliet CBOC Floor(s)/Room(s): All
Start date: ~12/2023 Projected completion date: ~11/2024
Construction Activity Infection Control Risk Group
☐ TYPE A: DUST LEVEL Low
Non-invasive activity, low noise, no vibration.
☐ GROUP 1: LOW
Office areas, FMS areas, all non-patient care areas.
☐ TYPE B: DUST LEVEL: Moderate to High
Small scale, short duration, low-moderate noise, low-moderate vibration.
☐ GROUP 2: MEDIUM
All other patient care areas including general medicine floors, ultrasound, Rehab, Occupational Therapy.
☐ TYPE C: DUST LEVEL Moderate to High
Requires more than one work shift (independent of working days) to complete, low-moderate noise, moderate–high vibration
☒ GROUP 3: MEDIUM/HIGH
ED, Radiology/MRI, admissions, food service areas, laboratories.
☒ TYPE D: DUST LEVEL High
Major demolition and construction activities. Requires consecutive work shifts, moderate-high noise, moderate-high vibration
☐ GROUP 4: HIGHEST
Operating rooms, SPS, ICU’s, Outpatient areas, oncology, anesthesia, post anesthetic recovery, all endoscope areas, Pharmacy, Renal Dialysis
Project Class Determination Matrix Construction Activity Type →
Risk Group
Type
“A”
Type
“B”
Type
“C”
Type
“D”
Group 1 I II II III
Group 2 I II III IV
Group 3 I III III IV
Group 4 III IV IV IV Contractors Actions by Project Class
All personnel will have Emergency Preparedness training/posting/ID card.
CLASS
I
1. Execute work to minimize air-borne dust dispersed into atmosphere from construction operations.
2. Immediately replace any ceiling tile displaced for visual inspection.
3. Contain construction waste before transport in tightly covered containers.
4. Clean work area upon completion of task including wiping surfaces with disinfectant.
5. Contact EMS for appropriate preparation for return to operation(s).
CLASS
II
In addition to above:
6. Post the signed ICRA at the entrance.
7. Isolate work area from patients/staff. Use appropriate temporary barriers and more permanent containment methods (i.e., seal holes in walls, tape gaps in doors, etc.)
8. Water mist work surfaces to control dust while cutting.
9. Block off and seal supply air vents. Place filter over return/exhaust vents.
10. Place dust mat or wipe feet at entrance/exit of work area.
11. Wet mop and/or vacuum w/HEPA filtered vacuum before leaving work areas.
CLASS
III
In addition to above:
12. Install barriers to create a negative pressure ante room and/or workroom.
13. Maintain negative air pressure in work area at all times until completion utilizing HEPA-equipped air filtration units.
14. Vacuum personnel with HEPA vacuum before leaving. Or, Don-Doff coveralls each time leaving work site. All wear shoe covers changed each time exiting the area.
15. Vacuum the entire work area with HEPA vacuums or wet mop with disinfectant at the completion of project.
16. Do not remove barriers until completed project is inspected by Safety, IC-Team, EMS, and Area Manager.
17. Carefully remove barriers to minimize spread of dirt and debris. Contact EMS for final clean.
CLASS
IV
In addition to above:
18. Provide a disinfectant wipe down of any tool carts or waste transports prior to leaving the containment area.
19. Do not remove barriers until terminal clean is performed inside work zone and barriers are included in the cleaning process.
20. Perform 2nd terminal cleaning after removal of barriers. Contact EMS for final clean.
Signatures Date
Contractor’s Signature:
(Projects Only)
Project Planner or
Maintenance Worker Signature:
Supervisor Signature:
Infection Control:
VHAHINWalshA Oval
VHAHINWalshA Oval
VHAHINFraidR Typewritten Text 03/30/2023
| 2023-03-28T15:05:39-0500 | |
| AARON WALSH |
| 2023-03-30T07:54:43-0500 | |
| Richard F Fraider 3548196 |
File details come from the government source that posted it. Updated .