CUI C03.0 Answer to Bidder's Questions 008.pdf
PDF 154 KB Posted
- Attached to
- USS Jacksonville Non-SUBSAFE Repair Work
- Solicitation number
- N4523A21R0800
About this file
This document contains a solicitation for non-nuclear hull blanking and inactivation work on the USS Jacksonville. The Naval Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a firm-fixed-price contract for non-SUBSAFE pipe and structural welding, interference removals including cabling and special hull tile, blanking of main ballast tanks and exterior tanks. The contractor shall provide management, material support, labor, supplies and equipment to perform this work at Puget Sound Naval Shipyard in accordance with NAVSEA standard items, SUBMEPP standards and PSNS&IMF quality and environmental requirements. The period of performance is from September 1, 2021 to December 20, 2021. The government anticipates awarding the contract in August 2021 to the responsible contractor with the lowest price technically acceptable proposal in accordance with FAR 15.101-2.
View the file
Other files
Show all 38
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR CLARIFICATION
N4523A21R0800 USS Jacksonville Blanking Attachment J-7
DATE OF REQUEST:
REQUIREMENT: USS Jacksonville Blanking
QUESTION NO: 012
REQUISITION NO.: N4523A21R0800
ITEM NO:
TITLE: Main Ballast Tank (MBT) 1B; welded cap install
PSNS&IMF CONTRACTS POC & PHONE:
See POCs listed on RFP.
PARA. NO: PAGE NO:
PLANNER’S NAME: ATTACH. NO:
CONTRACTOR QUESTION: (ONE QUESTION PER PAGE)
DO NOT WRITE BELOW THIS LINE
SPEC CHG: Y/N DWG/REF CHG. Y/N RQMTS CHG: Y/N MAT'L CHG: Y/N
TECHNICAL REVIEW: SERIAL NO:
ALL BIDDER’S QUESTIONS MUST BE RECEIVED NO LATER THAN 12:00 P.M.
(PST),
21 April 2021
| ITEM NO: 123-10-002 |
| PARA NO: 4.1 |
| PAGE NO: 2 |
| CONTRACTOR QUESTION ONE QUESTION PER PAGE: Paragraph 4.1 notes "Pipe P-11D has a 1/4" low point drain hole". Pipe P-11D is not affected by this WI. The pipe affected by this WI is P27J. |
Recommend issuing errata to correct.
| TECHNICAL REVIEW: Anna Lewis |
| SERIAL NO: |
| ALL BIDDERS QUESTIONS MUST BE RECEIVED NO LATER THAN 1200 PM: Pipe P27J is the correct pipe and spec will be updated in errata 4. |
| Date: 4/15/21 |
| Text3: Y |
| Text4: N |
| Text5: Y |
| Text6: N |
File details come from the government source that posted it. Updated .