CUI C03.0 Answer to Bidder's Questions 005.pdf
PDF 158 KB Posted
- Attached to
- USS Jacksonville Non-SUBSAFE Repair Work
- Solicitation number
- N4523A21R0800
About this file
This document contains a request for clarification regarding a solicitation for non-SUBSAFE repair work on the USS Jacksonville. The Navy's Regional Maintenance Center at Puget Sound Naval Shipyard intends to award a firm-fixed-price contract for non-SUBSAFE welding, interference removals including cabling and sound damping tile, blanking of main ballast tanks and exterior tanks. The work will be performed at Puget Sound Naval Shipyard from September 2021 to December 2021 and derived from document PSNS&IMF100-8779866 Rev - regarding USS Jacksonville non-nuclear hull blanking and inactivation. Offerors must be registered in the System for Award Management and the Navy anticipates awarding the contract in August 2021 on a lowest price technically acceptable basis in accordance with the FAR.
View the file
Other files
Show all 38
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR CLARIFICATION
N4523A21R0800 USS Jacksonville Blanking Attachment J-7
DATE OF REQUEST:
REQUIREMENT: USS Jacksonville Blanking
QUESTION NO: 009
REQUISITION NO.: N4523A21R0800
ITEM NO:
TITLE: Main Ballast Tank (MBT) 1 electrical interference; remove
PSNS&IMF CONTRACTS POC & PHONE:
See POCs listed on RFP.
PARA. NO: PAGE NO:
PLANNER’S NAME: ATTACH. NO:
CONTRACTOR QUESTION: (ONE QUESTION PER PAGE)
DO NOT WRITE BELOW THIS LINE
SPEC CHG: Y/N DWG/REF CHG. Y/N RQMTS CHG: Y/N MAT'L CHG: Y/N
TECHNICAL REVIEW: SERIAL NO:
ALL BIDDER’S QUESTIONS MUST BE RECEIVED NO LATER THAN 12:00 P.M.
(PST),
21 April 2021
| ITEM NO: 123-01-001 |
| PARA NO: 1.3.7 |
| PAGE NO: 1 |
| ATTACH NO: J2 |
| CONTRACTOR QUESTION ONE QUESTION PER PAGE: Paragraph 1.3.7 component Identification is "(MBT1-4) MBT 1A/1B Electrical Tank Fitting T40". MBT1-4 is for fitting T23 which is covered in paragraph 1.3.5. IAW ref 2.2 Fitting T40 should be identified as MBT1-7. |
What is the correct identification for paragraph 1.3.7?
| TECHNICAL REVIEW: Anna Lewis |
| SERIAL NO: |
| ALL BIDDERS QUESTIONS MUST BE RECEIVED NO LATER THAN 1200 PM: The correct Identification for paragraph 1.3.7 is listed below. An errata to the work spec will follow. |
1.3.7 (MBT1-7) MBT 1A/1B Electrical Tank Fitting T40
| Date: 4/14/2021 |
| Text3: Y |
| Text4: N |
| Text5: N |
| Text6: N |
File details come from the government source that posted it. Updated .