SF_30_A00008_signed.pdf

(x)

HSCG23-15-R-FRCPII

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Washington DC 205930001

2703 MARTIN LUTHER KING JR AVE SE

USCG HEADQUARTERS (CG-912)

02/26/2015000008

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

02/26/2015

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to issue an updated Question and Answer Report, Dated May

8, 2015.

This amendment also updates the Request for Proposals based on these questions. See page 2 for changes.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Erica E. Fetter

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Phase II Fast Response Cutter (FRC) HSCG23-15-R-FRCPII Amendment A00008

SF-30 BLOCK 14 (Continued):

The purpose of this amendment is to issue an updated Questions and Answer report, dated May 8, 2015. In addition, this amendment issues updated RFP Sections incorporating the following changes into the RFP:

1) COR Section 083-6.2: The CDRL number for the Outfitting Operations Plan is corrected from CDRL 083-007 to CDRL 083-008.

2) The following updates have been made to Section J, Attachment #2, Circular of

Requirements:

a) COR Section 096: All references to "FRC-B" are changed to "FRC" for consistency.

b) COR Section 096-1.2: The Full Load Condition is clarified that grey water tank is empty in this condition.

c) COR Section 096-1.10: The Design Margin compliance is changed from COR Section

041 to COR Section 096-2.3.

d) COR Section 096-2.3: The Design Margin reference to COR Section 041 is removed.

e) COR Section 096-2.3: The Design Margin reference to COR Section 041 is removed.

3) The following updates have been made to Section J, Attachment #9:

a) Section J, Attachment 9, A9.1: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

b) Section J, Attachment 9, A9.2: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

c) Section J, Attachment 9, A9.3: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

d) Section J, Attachment 9, A9.4: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

e) Section J, Attachment 9, A9.5: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

f) Section J, Attachment 9, A9.6: The exception notes are changed from "No Exceptions" to " Only exceptions as noted in COR Section 100-1.3"

4) COR Section 457-1.1.2.1: The requirement for the 640x480 resolution for electronic zoom is removed. "Vision" is changed to "view" for consistency.

5) COR Section 457-1.1.2.3: The requirement for the field of vision of the Low Light Camera is changed from 59°-1.4° to 52°-1.4°.

6) COR Section 098-2.1: A reference to COR Section 410 is added to clarify the SEAWATCH- FRC Command and Control (C2) Suite.

7) COR Section 505-2.1.2.7: The requirement is clarified that where bronze components using non-SDWA compliant alloys are specified on Table 8, these components shall be substituted with equivalent lead-free bronze components certified to NSF/ANSI Standard 61.

8) COR Section 562-2.5: The maximum rudder stock seal leak rate has been clarified for all rudder stock diameters.

9) COR Section 410-2.2.2: The requirement is clarified to allow simulated sensor data to be used to demonstrate proper integration of all of the equipment with the GFE software.

Phase II Fast Response Cutter (FRC) HSCG23-15-R-FRCPII Amendment A00008

10) COR Section 410-2.2.2: The requirement is clarified to allow simulated sensor data to be used to demonstrate proper integration of all of the equipment with the GFE software.

11) COR Section 440-11.1.1: The output power is changed from 100W RMS to 50W RMS.

---End of Amendment A00008---