A00012_SF30_signed.pdf

(x)

HSCG23-15-R-FRCPII

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Washington DC 205930001

2703 MARTIN LUTHER KING JR AVE SE

USCG HEADQUARTERS (CG-912)

06/02/2015000012

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

02/26/2015

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to issue an updated Question and Answer Report, Dated June

2, 2015.

This amendment also updates the Request for Proposals. See page 2 for changes.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Erica E. Fetter

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Phase II Fast Response Cutter (FRC) HSCG23-15-R-FRCPII Amendment A00012

SF-30 BLOCK 14 (Continued):

The purpose of this amendment is to issue an updated Questions and Answer report, dated June 2, 2015.

In addition, this amendment issues updated RFP Sections incorporating the following changes into the

RFP:

1) COR Section 440-11.8.3, Table 440-4: The requirement for the antenna gain is changed from +10 dBic to +8.9 dBic. The requirement for the Slew Rate is changed from Azimuth: 25°/sec max heading rate and Elevation: 50°/sec max to Azimuth: 30°/sec max heading rate and Elevation: 12°/sec max.

2) RFP Section J, Attachment 9, Contract Drawing List: An exception note is added for line A9.38, drawing 154R-WPC-562-402 clarifying that the Wartsila RG22 lower bearing shown is not correct and to see drawing 154R-WPC-562-202 Rev A for the correct bearing information.

3) COR Section 252-1.1: 154R-WPC-252-301 Rev "-", Propulsion Control System, is revised to

154R-WPC-252-301 Rev A.

4) COR Section 300-1.4.3: 154R-WPC-320-301 Rev "-", 450V System Deck Plan, is revised to 154R-WPC-320-301 Rev A.

5) COR Section 324-3.1.1.1: 154R-WPC-320-301 Rev "-", 450V System Deck Plan, is revised to 154R-WPC-320-301 Rev A.

6) COR Section 505-1.1.10: 154R-WPC-533-301 Rev "-", Potable Water System Diagram, is revised to 154R-WPC-533-301 Rev A.

7) RFP Section J, Attachment 9, Contract Drawing List, the following changes are made:

a. Line A9.14: 154R-WPC-252-301 Rev "-", Propulsion Control System, is revised to

154R-WPC-252-301 Rev A.

b. Line A9.18: 154R-WPC-320-301 Rev "-", 450V System Deck Plan, is revised to 154R-

WPC-320-301 Rev A.

c. Line A9.28: 154R-WPC-533-301 Rev "-", Potable Water System Diagram, is revised to

154R-WPC-533-301 Rev A. Exception Note #2 is changed to "Reserved."

8) COR Section 074-5.3: The cited COR Section is corrected from 074-4.21 to 074-4.

9) COR Section 079-3.1.6: The title "US Navy Design Data Sheet 079.1 - Stability and Buoyancy of U.S. Naval Surface Ships" is added to clarify DDS 079-1.

10) COR Section 233-6.1.1.1: The version of the cited reference is changed from MIL-DTL-5624U to MIL-DTL-5624V.

11) RFP Section J, Attachment 4, References: MIL-DTL-5624U is changed to MIL-DTL-5624V.

Phase II Fast Response Cutter (FRC) HSCG23-15-R-FRCPII Amendment A00012

12) RFP Section J, Attachment 3, CDRL: On the Contract Data Requirements List Index, the CDRL Titles are changed for CDRL 583-002 and CDRL 583-003 from "Static Load Test" and "Dynamic Overload Test" to "Reserved." The Contract Ref, Authority, and Page information for these two CDRL lines are deleted. The pages for CDRL 583-002 and CDRL 583-003 are deleted. The page numbers on the Contract Data Requirements List Index are updated.

13) COR Section 070-1.1.2.4: The reference cited is changed from the Promulgation of the Navigation Rules and Regulations Handbook, COMDTINST M16672.2E to the DHS USCG Navigation Rules and Regulations Handbook.

14) COR Section 421-3.1: The reference cited is changed from the Promulgation of the Navigation Rules and Regulations Handbook, COMDTINST M16672.2E to the DHS USCG Navigation Rules and Regulations Handbook.

15) COR Section 422-2.2: The reference cited is changed from COMDTINST M16672.2E to the DHS USCG Navigation Rules and Regulations Handbook.

16) COR Section 422-2.3: The reference cited is changed from COMDTINST M16672.2E to the

17) COR Section 443-1.2: The reference cited is changed from COMDTINST M16672.2E to the

18) COR Section 443-1.2.1: The reference cited is changed from COMDTINST M16672.2E to the

19) COR Section 443-2.3.1: The reference cited is changed from COMDTINST M16672.2E to the

20) RFP Section J, Attachment 4, References: COMDTINST M16672.2 – Promulgation of the Navigation Rules and Regulations Handbook is changed to DHS USCG Navigation Rules and Regulations Handbook, August 2014 edition (Corrected through LNM 46-14/NTM 48-14 Nov.

22nd 2014).

21) COR Section 556-1.4: The reference cited is changed from ISO 4406 18/5 to ISO 4406 18/16/13.

22) COR Section 432-3.9.1: The requirement for the audible signal is clarified from "clearly audible" to require an intensity at least 99 dB at 3.05m (10 ft).

23) COR Section 440-11.8.3, Table 440-4: The VSWR requirement is changed from 1.7.1 or less to

1.5.1 or less and the Beamwidth is changed from 90° to 71° to 79°.

---- End of Amendment A00012 ----