FAR 52.212-2 Attachment (A).pdf

Attachment (A) – N42158-22-Q-S072

Vendor shall certify that equipment being quoted meets the capabilities listed below and that vendor can assume all contractor responsibilities stated below by initialing at the bottom. In order to be considered for award, this must be completed and submitted with the vendor quote.

TECHNICAL CAPABILITES STATEMENT

General Specification: Services for water tank and filters

Shall be provided with the following capabilities, features and specifications: Yes No

The contractor will provide labor, materials, and equipment to produce Grade A water from

NNSY tap water source UIPI 5530-901B, p.A-1 (p.123): Chloride Ion: 0.1 ppm, maximum.

NNSY tap water source UIPI 5530-901B, p.A-1 (p.123): Conductivity: 2.5 micromhos/cm, maximum.

NNSY tap water source UIPI 5530-901B, p.A-1 (p.123): pH Range: 6.0 – 8.0.

NNSY tap water source UIPI 5530-901B, p.A-1 (p.123): Visual Clarity: No turbidity, oil, or sediment.

NNSY tap water source UIPI 5530-901B, p.A-1 (p.123): Particle level: Filtered to 10 μm nominal, or finer.

Contractor is responsible for the maintenance and upkeep of the provided equipment.

The contractor shall provide the equipment to produce a minimum of 2000 gallons per month of purified Grade A water for the Nuclear Test Cage in Building 234.

The contractor shall provide the equipment to produce a minimum of 100 gallons per month of purified Grade A water for the O2N2 Section in Building 202.

NNSY will test and sample the water monthly. If samples fail, the contractor must respond within 24 hours to perform maintenance/repair of equipment.

TECHNICAL CAPABILITY/CONTRACTOR RESPONSIBILITY CERTIFICATION

Vendor hereby certifies that vendor’s service meets or exceeds all specifications and contractor responsibilities stated in this solicitation, in their entirety, with no exceptions. __________ (initials)

Signature Printed Name

Title Date