Exhibit R Specifications for Accessory Mulcher Attachment.docx
DOCX document 27 KB Posted
- Attached to
- JPMC Heavy Duty Equipment
- Solicitation number
- 23-416CMS-BOSS4-B-29409
- Issued by
- Illinois
About this file
This document contains the specifications for a hydraulic mulcher attachment that the State of Illinois Department of Central Management Services is seeking. The mulcher is intended for use with a six-wheel-drive, articulated motor grader for brush clearing, vegetation management, and removing undesirable growth. The preferred mulcher size is 48 inches wide with a working width of 40 inches, weighing no more than 1,200 pounds. It must be belt-driven by a hydraulic motor requiring 18 to 34 gallons per minute of auxiliary hydraulic flow at 2,175 to 3,626 pounds per square inch of pressure. The mulcher must include 18 replaceable cutting teeth and an additional set of replacement teeth.
The document states that this mulcher attachment is for a specific State of Illinois contract opportunity identified as "JPMC Heavy Duty Equipment." No pricing terms, set-asides, incumbent information, funding sources, or other salient details are provided in the document.
View the file
Other files
Show all 30
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of Illinois Department of Central Management Services
Specifications for a Six-Wheel-Drive, Articulated, Motor Grader
Exhibit R
Specifications for Accessory Mulcher Attachment
The following specifications covers the minimum requirements for a hydraulic mulcher designed for brush clearing and vegetation management. The equipment shall be new, of current design and manufacture, and a production model. Any additions, deletions, or variations from the following specifications must be noted or the equipment will be rejected. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise noted.
Parts and service for the equipment should be readily available within the State of Illinois.
Unless otherwise specified, the equipment shall be complete in all parts and ready for immediate use upon delivery.
Make:
Model:
Manufacturer:
The State reserves the right to waive minor informalities, deficiencies, or technical variances which by their nature are restrictive to a given manufacturer, if in its’ judgement, it would be in the best interest of the State.
The hydraulic mulcher shall be designed for brush clearing, vegetation management. and removing undesirable growth from backslopes and rights of way.
The product shall be a cutter shaft design with reversible, replaceable teeth designed to ensure at least one tooth is in contact with the cutting material at all time. The mulcher or forestry head must be designed to operate and mount to the track excavator specified above. It shall be readily attachable to the coupler provided, with quick attach hydraulic fittings. All other controls shall be easily accessed by the operator in the cab.
The preferred mulcher size shall be 48” wide with a working width of 40”. It shall be approximately 28” long with an approximate overall height of 42”.
The mulcher shall weigh no more than 1,200 pounds, and be belt driven by an axial piston, dual speed hydraulic motor.
The mulcher shall require the excavator to produce an auxiliary hydraulic flow of 18 to 34 gpm at a pressure of 2,175 to 3,626 psi.
The drum shall have an operating rpm 2,770 and 2,890. The drum shall include 18 replaceable cutting teeth. An additional set of replacement teeth shall be provided.
The mulcher shall include all manufacturers safety devices and warnings including a rear chain guard.
The mulcher shall include an integrated stand for level storage and bolt-on replaceable skid shoes.
File details come from the government source that posted it. Updated .