Exhibit N1 Specifications for Motor Grader V Plow Accessory.docx
DOCX document 26 KB Posted
- Attached to
- JPMC Heavy Duty Equipment
- Solicitation number
- 23-416CMS-BOSS4-B-29409
- Issued by
- Illinois
About this file
This document contains the specifications for a Motor Grader V-Plow Accessory issued by the State of Illinois Department of Central Management Services. The specifications cover the minimum requirements for a new, six-wheel-drive, articulated, motor grader V-plow accessory. Key details include the required dimensions, construction materials, components, and weight of the accessory. The accessory is to be designed to mount in place of the front mount scarifier for snowplow operations.
The related state and local contract opportunity is for JPMC Heavy Duty Equipment, which is located in the state of Illinois. No additional details are provided regarding the specific contract opportunity, such as quantities, response dates, award dates, or contract terms.
View the file
Other files
Show all 30
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of Illinois Department of Central Management Services
Specifications for a Six-Wheel-Drive, Articulated, Motor Grader
Exhibit N1
Specifications for a Motor Grader Accessory V-Plow
The following specifications covers the minimum requirements for V-plow motor grader accessory. The equipment shall be new, of current design and manufacture, and a production model. Any additions, deletions, or variations from the following specifications must be noted or the equipment will be rejected. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise noted.
Parts and service for the equipment should be readily available within the State of Illinois.
Unless otherwise specified, the equipment shall be complete in all parts and ready for immediate use upon delivery.
Make:
Model:
Manufacturer:
The State reserves the right to waive minor informalities, deficiencies, or technical variances which by their nature are restrictive to a given manufacturer, if in its’ judgement, it would be in the best interest of the State.
Constructed to mount in place of the front mount scarifier for snowplow operations.
The V-plow nose height shall be a minimum of 56 inches.
Upper rear tail height shall measure a minimum of 83 inches.
Moldboard face shall be 3/16-inch-high tensile steel.
Upper tail width will measure approximately 154-158 inches.
V-plow shall have a ground cutting swath of 120 inches.
The unit will be equipped with a minimum of three runner assemblies, 1.5 inches in width minimum. The runners will be attached with Grade 8 hardware and use a pin adjuster for carring height.
Two (2) replaceable cutting edge will be installed, measuring 0.5 x 8 x 72 inches.
A nose piece will be installed.
Approximate weight of 3100 lbs.
The plow will be cleaned, prepped, painted and/or powder coated the manufacturer’s standard color.
File details come from the government source that posted it. Updated .