UPS SEC-J ATT J.2 CDRL.doc

Contract Data Requirements List (1 Data Item) Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) systems, and all Associated Software

N/A

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 10 - One TIME submission unless UPS and associated equipment processor/control and monitoring software is changed.

Block 12 - The contractor shall provide software interface documents 10 calendar days following receipt of Delivery Order.

Block 13 - If UPS and associated equipment processor/control and monitoring software is changed or reconfigured the contractor shall update and submit the revised Software Interface Document.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) systems, and all Associated Software

N/A

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 10 - One TIME submission unless UPS and associated equipment processor/control and monitoring software is changed.

Block 12 - The contractor shall provide software interface documents 10 calendar days following receipt of Delivery Order.

Block 13 - If UPS and associated equipment processor/control and monitoring software is changed or reconfigured the contractor shall update and submit the revised Software Interface Document.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) systems, and all Associated Software

No

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

(a) Total (

16. Remarks:

Block 10: Submit UPS Maintenance Diagnostic and Analysis Software data sheets 30-calendar days following FAA approval to PURCHASE NEW UPS configurations.

Block 12: Submit UPS Maintenance Diagnostic and Analysis Software on all UPS models in CLINs 0001 and 0002 30-calendar days after contract award.

Block 13: Submit UPS Maintenance Diagnostic and Analysis Software 30-calendar days following FAA approval to purchase new UPS configurations.

17. Price Group:

18. Estimated Total Price:

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) systems, and Associated Equipment

Data and Drawing Sheets

No

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

(a) Total (

16. Remarks:

Block 10: Submit UPS and associated equipment data and drawing sheets 30-calendar days following FAA approval to purchase new UPS and associated equipment configurations.

Block 12: Submit UPS and associated equipment data and drawing sheets on all CLINs 0001 through 0008 30-calendar days after contract award.

Block 13: Submit UPS and associated equipment data sheet 30-calendar days following FAA approval to purchase new UPS and associated equipment configurations.

17. Price Group:

18. Estimated Total Price:

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) systems, and Associated Equipment

No

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

(a) Total (

16. Remarks:

Block 10: Submit UPS LRU Lifecycle/Replacement Frequency report 30-calendar days following FAA approval to purchase new UPS and associated equipment configurations.

Block 12: Submit UPS LRU Lifecycle/Replacement Frequency report all CLIN 0001 and 0002 UPSs 30-calendar days after contract award.

Block 13: Submit UPS LRU Lifecycle/Replacement Frequency report 30-calendar days following FAA approval to purchase new UPSs.

17. Price Group:

18. Estimated Total Price:

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0016, 1016, 2016, 3016, 4016

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 12: The contractor must submit the ISP or the applicable portions of their ISO 9000 series documentation or a copy of internal documentation that support both the scope and intent of the ISP not later than 10 calendar days after receiving delivery order.

The Government will review and comment or approve the ISP, ISO 9000 series documentation, or internal corporate documentation within 30 calendar days after receipt from contractor.

Block 13: The contractor must update and resubmit the ISP or substituted corporate documentation, as revisions occur or 10 calendar days following receipt of Government comments.

* LTO = “Letter of Transmittal Only”

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0016, 1016, 2016, 3016, 4016

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

Site Spare Parts List (SSPL), Spare Parts Peculiar List (SPPL)

Complete Parts List (CPL) N/A

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

(a) Total (

16. Remarks:

Block 12: The first Submittals are with the vendor’s Bid proposal as directed in CONTRACT Section-L.

The Government will review, comment, approve/disapprove the se Lists and provide the vender with COMMENTS during the Post Award Conference.

Block 13: The contractor must update and resubmit these Lists every 90 calendar days prior to revisions in equipment, and when the vendor introduces a new product line of equipment.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0016, 1016, 2016, 3016, 4016

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 12: The First Support Equipment Candidate List submittal is with the vendor’s Bid proposal as directed in SIR/RFO Section-L The SECL must include test and tools list for the UPS and associated equipment that is listed in the SIR/RFO Section-B.

The Government will review, comment, approve/disapprove the Support Equipment Candidate List(s) and provide the vendor with COMMENTS during the Post Award Conference.

Block 13: The Contractor must update and resubmit the Support Equipment Candidate List 90 calendar days prior to revisions to existing UPS and associated equipment, and when the vendor introduces a new product line of UPS or associated equipment.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0016, 1016, 2016, 3016, 4016

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other Contract Base Award

Uninterruptible Power Supply (UPS)

No

14. D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 10 – monthly, or as described in the body of the Data Item Description (DID).

Block 12 – Date of 1st sumbission of all reports shall be:

60 working days after the First month after contract award.

Block 13 – Date of subsequent submissions must be:

monthly: 10 working days after the month the data was collected for.

* LTO = Letter of Transmittal Only

Due to size considerations, the repair status report may be submitted in electronic format or zipped transmittal email. The report must be delivered to the FAA Contracting Officer, and must be dispersed to the appropriate FAA Offices as requested by the Contracting Officer.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0016, 1016, 2016, 3016, 4016

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other Contract Base Award

Uninterruptible Power Supply (UPS)

No

14. D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 10 – monthly, as described in the body of the Data Item Description (DID).

Block 12 – Date of 1st sumbission of all reports shall be:

60 working days after the First month after contract award.

Block 13 – Date of subsequent submissions must be:

monthly: 10 working days after the month the data was collected for.

Due to size considerations, the repair status report may be submitted in electronic format or zipped transmittal email. The report must be delivered to the FAA Contracting Officer, and must be dispersed to the appropriate FAA Offices as requested by the Contracting Officer.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0017, 1017, 2017, 3017, 4017

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS)

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 10 – monthly

Block 11 – 15th Calendar Day of the Month

Block 12 – Date of 1st submission of all reports shall be:

monthly: 15 Calendar days after the first month after contract award.

Block 13 – Date of subsequent submissions shall be:

monthly: 15 Calendar days after the month the data was collected for.

* LTO = Letter of Transmittal For Invoice Only

Block 14 (b) Contractor shall provide the Government with an electronic copy via email.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0017, 1017, 2017, 3017, 4017

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS)

No

See Block 16

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

FAALC (AML-8050)

16. Remarks:

Block 11: 30 days after Contract Award

Block 12: 30 Days After Contract Award

Block 13: At time of Technical Interchange Meetings (TIMs), Program Management Reviews and Integrated Logistics Management Team Meetings.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015B, 1015B, 2015B, 3015B, 4015B

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 12 - The contractor shall submit the Program Plan 10 calendar days following receipt of delivery order.

Block 13 - The contractor shall update and submit the Program Plan as revisions to the Program management structure occur.

Block 14b – Repo means emailed soft copy.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015C, 1015C, 2015C, 3015C, 4015C

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 12 - The contractor shall submit the Program Management Report not later than 30 calendar days following the first Task or Delivery Order.

Block 13 - The contractor shall update and submit the Program management Report at least once every quarter unless otherwise directed by the Government.

Block 14b – Repo means emailed soft copy.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other Contract Base Award

Uninterruptible Power Supply (UPS) and all Associated Equipment

See Block 16

14. D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 10: When UPS and associated equipment units are shipped from factory floor to the FAA site.

Block 11, 12 and 13: Date of SHIPMENT.

Block 14: Softcopy must be in MS Excel or ASCII test as appropriate on electronic media.

Government comment and acceptance of the submission is required

Prepared By:

Marilyn Jarvis, NAS Power Services Group

Peter Megna, NAS Power Service Group 11/22/16

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other Contract Base Award

Uninterruptible Power Supply (UPS) and all Associated Equipment

See Block 16

14. D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 10: When UPS and associated equipment units are shipped from factory to an FAA site or e-Stock Warehouse. And, when shipped from e-Stock warehouse to an FAA site Block 11, 12 and 13: Date of SHIPMENT.

Block 14: SCAN EVendor SHIPPING DOCUMENTATION REFLECTING ORIGIN AND DESTINATION. SEND SOFTCOPY TO ADDRESSEES IN BLOCK 14.

Government comment and acceptance of the submission is required

Prepared By:

Marilyn Jarvis, NAS Power Services Group

Peter Megna, NAS Power Service Group 11/22/16

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS)

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

(a) Total (

16. Remarks:

AGENDAs

Block 12 and 13: The contractor shall submit conference/meeting agenda to the Government a minimum of 15 working days prior to each scheduled conference for which the contractor has responsibility.

The Government reserves the right to add or delete agenda items. The Government will respond to the contractor within five (5) working days after receipt of the agenda, if required. The Government may respond by telephone, letter, e-mail, or FAX..

17. Price Group:

18. Estimated Total Price:

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS)

No

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

(a) Total (

16. Remarks:

MEETING MINUTES

Block 12 and 13: The contractor shall submit conference/meeting minutes, for which the contractor has responsibility, to the Government for approval within 5 working days after each conference/meeting.

The Government reserves the right to redline, clarify, or add/delete items from the minutes before granting approval.

The contractor shall resubmit minuets, if required, to the Government for approval within five (5) working days after receipt of redlines.

Block 14: Additional copies of the minutes shall be distributed per the attendance list.

17. Price Group:

18. Estimated Total Price:

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 12 - The contractor shall submit to the Government the contractor’s QA Plan 10 calendar days following receipt of delivery order. If the Contractor is ISO 9000 certified, the Contractor will be required to submit his/her current ISO certification, to the Government.

Block 13 - The contractor shall update and submit the QA Plan as revisions to the QA Plan occur.

Block 14b – Repo will designate electronic copies, emailed to the Government.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0015A, 1015A, 2015A, 3015A, 4015A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other ( Contract Base Award)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

Contracting Officer *LTO

Power Services Group

16. Remarks:

Block 12 - The contractor shall deliver the Contractors Configuration Management Plan 10 calendar days after receipt of delivery order. If the Contractor is ISO 9000 certified, the contractor will be required to provide his/her latest certification to the Government.

Block 13 - The contractor shall update and submit the Contractor’s Configuration Management Plan as revisions occur.

Block 14b – Repo will designate electronic copies.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014A, 1014A, 2014A, 3014A, 4014A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

See Block 16

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Para. 2-7 and Appendix 1, DID–1, Personnel Qualifications Report.

Note: One software copy of FAA-STD-028C will be provided by the Government.

Block 10 – When instructors leave or new instructors hired.

Block 12 – Original submittal 10 calendar days from RECEIPT of delivery order.

Block 13 - 5 Calendar days following receipt of Government review comments.

Block 14 - Email any subsequent re-submission to each Addressee.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014A, 1014A, 2014A, 3014A, 4014A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

See Block 16

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 10 – Original and two re-submittals.

Block 12 – Original Submittal 45 calendar days from RECEIPT of delivery order.

Block 13 – Re-submittals 10 calendar days following RECEIPT of FAA review COMMENTS. And, final version submitted prior to CDRL T013, DID-16 First Course Conduct.

Block 14 - Email to each addressee one softcopy of the original and re-submittal task and skills analysis report.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014A, 1014A, 2014A, 3014A, 4014A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Ch 7, Appendix 1, DID 5, Training Development Plan.

Note: Soft copy of FAA-STD-028C provided by the Government.

Block 10 – original and two re-submittals.

Block 12 – Original Submitted 30 calendar days following delivery order. .

Block 13 – two re-submittals each 7 calendar days after RECEIPT of review COMMENTS from FAA.

Block 14 - Deliver to each addressee 1 softcopy.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014A, 1014A, 2014A, 3014A, 4014A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Ch 5, Appendix 1, DID 6, COTS Training Materials Report .

Note: Soft copy of FAA-STD-028C provided by the Government.

Block 10 – Original and two re-submittals.

Block 12 – Original Submittal 60 calendar days from RECEIPT of delivery order. And, final version submitted prior to CDRL T013, DID-16 First Course Conduct.

Block 13 – Re-submittals 10 calendar days following RECEIPT of FAA review COMMENTS.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Note: Tests must be controlled documents.

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Ch 7, Appendix 1, DID 7, Tests.

Note: Soft copy of FAA-STD-028C provided by the Government.

Block 10 – Original and two re-submittals.

Block 12 – Original Submittal 30 calendar days from RECEIPT of delivery order.

Block 13 – Re-submittals 10 calendar days following RECEIPT of FAA review COMMENTS.

Block 14 - Deliver to each addressee 1 softcopy.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014A, 1014A, 2014A, 3014A, 4014A

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Ch 5, Appendix 1, DID 8, COTS Training Materials Report .

Note: Soft copy of FAA-STD-028C provided by the Government.

Block 10 – Original and two re-submittals.

Block 12 – Original Submittal 90 calendar days from RECEIPT of delivery order.

Block 13 – Re-submittals 10 calendar days following RECEIPT of FAA review COMMENTS; final version submitted prior to CDRL T013, DID-16 First Course Conduct.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014G, 1014G, 2014G, 3014G, 4014G

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, STD 028C Ch 5, Appendix 1, DID 8, COTS Training Materials Report .

Note: Soft copy of FAA-STD-028C provided by the Government.

Block 10 – Original and two re-submittals.

Block 12 – Original Submittal 90 calendar days from RECEIPT of delivery order.

Block 13 – Re-submittals 10 calendar days following RECEIPT of FAA review COMMENTS; final version submitted prior to CDRL T013, DID-16 First Course Conduct.

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014D, 1014D, 2014D, 3014D, 4014D

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A one time

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, Appendix 1, DID–14, Contractor's Presentation.

Note: Contractor’s Presentation is an ABBREVIATED version of the actual training course. Prior to presenting the course to FAA evaluators the vender will submit supporting documentation.

Note:: Soft copy of FAA-STD-028C provided by the Government.

Block 12 – No later than 30 calendar days prior to scheduled presentation submit deliverables to the FAA for review.

Block 13 – Re-submit deliverables during operational tryout, incorporate FAA COMMENTS into submittal.

Block 14 - Deliver to each addressee 1 softcopy.

*LTO = Letter of Transmittal Only

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014E, 1014E, 2014E, 3014E, 4014E

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, Appendix 1, DID-15, Operational Tryout.

Note: a softcopy of FAA-STD-028C will be provided by the Government.

Note: Contractor’s operational tryout is APPROXIMATELY 1 ½ times the proposed course length. Prior to PERFORMING the operational tryout for FAA evaluators the vendor will submit supporting documentation.

Note:: Soft copy of FAA-STD-028C provided by the Government.

Block 12 – No later than 15 calendar days prior to scheduled operational tryout submit plan for operational tryout and all instructional MATERIAL to the FAA. The instructional material is course material revised after presenting the Contractor’s presentation and receiving FAA review COMMENTS.

Block 13 – Re-submit deliverables during first course conduct, incorporate FAA review COMMENTS.

Block 14 - Deliver to each addressee 1 softcopy.

Block 14 - Deliver to each addressee 1 softcopy of the course materials when requested by the Government.

*LTO = Letter of Transmittal Only

Contract Data Requirements List

Form Approved OMB No. 0704-0188

0014F, 1014F, 2014F, 3014F, 4014F

FORMCHECKBOX

tdp FORMCHECKBOX tm FORMCHECKBOX other (Training)

Uninterruptible Power Supply (UPS) and all Associated Equipment

N/A

D I S T R I B U T I O N

b. Copies

b. Copies

a. Addressee

Final

16. Remarks:

Block 4 - Guidance for content can be found in FAA-STD-028C, Contract Training Programs, Appendix 1, DID-16 , First Course Conduct.

Note: Soft copy of FAA-STD-028C will be provided by the Government.

Note: First Course Conduct is first full length course taught by the vendor. Prior to performing the first course conduct the vendor must submit deliverables.

Note:: Soft copy of FAA-STD-028C provided by the Government.

Block 12 – No later than 30 calendar days prior to scheduled First Course Conduct submit plan for deliverables as required in DID -16. Before submitting documents revise documents by incorporating FAA review comments generated from operational tryout. These document deliverables include final TASA and Course Design Guide.

Block 13 – 10 calendar days following receipt of FAA review comments, from first course conduct, re-submit documents to FAA with revisions.