DLM Attachment 7 - Minimum Tool Box Requirements.xlsx

XLSX spreadsheet 25 KB Posted

Attached to
Depot Level Maintenance (DLM) Support Services FRCSW, North Island, CA
Solicitation number
N6852021R0007
Issued by

About this file

Written by GovTribe AI ·

This document includes a federal contract solicitation and minimum tool requirements for related opportunities. The solicitation seeks proposals for Depot Level Maintenance support services at Fleet Readiness Center Southwest in North Island, California. Services include rework, repair, and manufacturing of aircraft, engines, and components. The contract type is a single-award Indefinite Delivery/Indefinite Quantity contract with cost-plus-fixed-fee and cost reimbursement line items over a five-year ordering period. The requirement is set aside 100% for 8(a) small businesses. The Navy is the contracting agency and Aircraft Readiness Alliance currently performs the services under contract N68936-17-C-0081. The minimum tool requirements outline equipment needed for sheet metal mechanics, machinists, aircraft electricians, and flight line mechanics supporting the work.

View the file

Other files

File Type Posted
DLM QAs 18 May 2022.pdf PDF
N68520-21-R-0007-0006.docx DOCX document
DLM Attachment L-5_Vol_4_ AFBL - Amend 6.xlsx XLSX spreadsheet
DLM Attachment L-4_Vol_4_CS-1 - Amend 6.xls XLS spreadsheet
N68520-21-R-0007-0005.docx DOCX document
DLM QAs 5 May 2022.pdf PDF
DLM Attachment L-4_Vol_4_CS-1 - Amend 5.xls XLS spreadsheet
DLM Attachment 13 - CBA Cannon AFB - Amend 5.pdf PDF
DLM Attachment L-5_Vol_4_ AFBL - Amend 5.xlsx XLSX spreadsheet
DLM QAs 13 April 2022.pdf PDF
DLM Attachment 6 - Key Personnel updated Amend 4.docx DOCX document
DLM QAs 13 April 2022.pdf PDF
DLM Attachment 5 - Level Of Effort_Update Amend 4.pdf PDF
N68520-21-R-0007-0004.docx DOCX document
DLM Attachment L-5_Vol_4_ AFBL - Amend 4.xlsx XLSX spreadsheet
DLM Attachment 20 - Applicable Wage Determination (Amend 4).docx DOCX document
DLM Attachment 2 - Trade Specialties updated Amend 4.docx DOCX document
N68520-21-R-0007-0003.docx DOCX document
DLM Attachment 5 - Level Of Effort_Update.pdf PDF
Exhibit A - CDRLs - updated.pdf PDF
DLM Attachment 9 - CBA F-18 Center Barrel - Updated.pdf PDF
DLM Attachment L-5_Vol_4_ AFBL - updated.xlsx XLSX spreadsheet
DLM QAs 1 April 2022.pdf PDF
DLM Attachment 6 - Key Personnel updated.docx DOCX document
DLM Attachment 15 - CBA - NAS North Island - Update.pdf PDF
DLM Attachment L-4_Vol_4_CS-1 updated.xls XLS spreadsheet
DLM Attachment 2 - Trade Specialties updated.docx DOCX document
N6852021R0007-0002.docx DOCX document
DLM QAs 29 March 2022.pdf PDF
N68520-21-R-0007 -0001.docx DOCX document
DLM Attachment L-4_Vol_4_CS-1.xls XLS spreadsheet
Exhibit A - CDRLs.pdf PDF
DLM Attachment L-2_Vol_2_PPQ.docx DOCX document
DLM Attachment 6 - Key Personnel.docx DOCX document
DLM Attachment 8 - DD 254 Security Classification.pdf PDF
DLM Attachment 5 - Level Of Effort.pdf PDF
DLM QAs 4 March 2022.pdf PDF
DLM QAs 24 Feb 2022.pdf PDF
DLM QAs 23 Feb 2022.pdf PDF
DLM QAs 18 Feb 2022.pdf PDF
DLM Attachment 20 - Applicable Wage Determination.docx DOCX document
DLM Attachment 2 - Trade Specialties.docx DOCX document
DLM Attachment L-1_Vol_1_ES_Tables.xlsx XLSX spreadsheet
DLM Attachment 3 - Trade Skills Training Plans and Outlines.docx DOCX document
DLM Attachment 15 - CBA North Island F-18 Center Barrel.pdf PDF
DLM Attachment L-5_Vol_4_ AFBL.xlsx XLSX spreadsheet
DLM Attachment 1 - Work Task Guidance.xls XLS spreadsheet
DLM Attachment 11 - CBA Yuma 12-15-2017 to 12-14-2022.pdf PDF
N68520-21-R-0007.docx DOCX document
DLM Attachment 5 - Level Of Effort.pdf PDF
Show 40 more

Latest 50 of 68 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet Metal Mech

Roll-Away Tool Box 30” w/ 5 drawers (Minimum)
Air Hose 50’
Allen Wrenches (hex key 1/16” thru 3/8”)
Ballpeen Hammer
C-Clamp (2”) – Qty 3
Cherry-Max Gauge
Chuck Key (for Drill Motor(s))
Chisel (1/2”)
Cleco (# 40) – Qty 10
Cleco (# 30) – Qty 10
Cleco (# 21) – Qty 10
Cleco (#10) – Qty 10
Combination Square
Countersink (100-degree w/ # 40-degree pilot)
Countersink (100-degree w/ # 30-degree pilot)
Countersink (100-degree w/ # 21-degree pilot)
Countersink (100-degree w/ # 10-degree pilot)
Crescent Wrench - 8”
Die Grinder 90 Degree (Air)
Die Grinder Arbor (Mandrel) Set
Disc Holder, Turn-on (Sanding Disc Arbor) 1-1/2” & 2” (Yard Store)
Drill Bits (Threaded)
SHORT: #8, #10, #13, #16, #19, #21, #27, #40, #50, & 1/4”
LONG: #8, #10, #13, #16, #19, #21, #27, #40, #50, & 1/4”
Drill Bits (Cobalt)
SHORT: #8, #10, #13, #16, #19, #21, #27, #40, #50, & 1/4”
LONG: #8, #10, #13, #16, #19, #21, #27, #40, #50, & 1/4”
Drill Bit Case(s)
Drill Motor (1/4” air required)
Drill Motor 45 degree (1/4” air required)
Drill Motor 90 degree (1/4” air required)
1/4" Drill Extension (Threaded 4”)
1/4” Drive Socket Set w/ Ratchet (1/4” thru 9/16”)
1/4” Drive Extension 2” & 6”
1/4” Drive Universal Joint Adapter
3/8” Drive Socket Set w/ Ratchet (1/4” thru 9/16”)
3/8” Drive Extension 2” & 6”
3/8” Drive Universal Joint Adapter
File (tapered rotary)
File (barrel type rotary)
File (ball rotary)
File (rattail fine)
File (flat vixen) File (flat mill 2nd cut)
File (1/2 round fine)
Flashlight (Preferably Digital)
Hi-Lok Ratchet “Optional”
Hi-Lok Pliers (blue holder)
Hi-Lok Gauge
Hole Deburring Tool
Hole Finder (3/32”, 1/8”, 5/32”, 3.16”)
Mallet Plastic
Magnet Telescoping
Micro-stop Cage (Use with above countersinks) – Qty 2
Mirror Inspection
Pliers (duckbill)
Pliers (long-nose)
Pliers (diagonal cutters)
Pliers (slip joint 8”)
Pliers (vise grips) 6” & 10”
Pliers (vise grip) long nose
Pliers (Cleco, slot)
Pneumatic Vacuum
Protractor Blade (12”)
Punch (Auto center)
Punch (pin 1/8”, 5/32”, 3/16”, 3/32”)
Punch (3/8” tapered)
Punch (brass and/or aluminum)
Pop Hand Riveter (Heavy Duty)
Rivet Gun -4X or Adjustable Speed *
Rivet Set (flush) *
Rivet Set (mushroom) *
Rivet Set 1/8” *
Rivet Set 5/32” *
Rivet Set 3/8” *
Rivet Set 3/32” *
Rivet Set (offset) 1/8” *
Rivet Set (offset) 5/32” *
Rivet Set (offset) 3/8” *
Rivet Set (offset) 3/32” *
Bucking Bar (flat) *
Bucking Bar (angle w/ 45 degree end) * (or) Rivet Kit to include at a minimum above Rivet items (*)
Steel Scale 6” (Graduated in 100th inch)
Steel Measuring Tape 12’
Screwdriver Straight Slot (#1, #2, #3, Stubby)
Screwdriver Phillips (#1, #2, #3, Stubby)
Screwdriver(s) Straight Slot (offset)
Screwdriver(s) Phillips (offset)
Scribe (w/ 1 end 90 degree)
Snips (straight)
Snips (left) “Optional”
Snips (right) “Optional”
Thread Hex Shank Drill Adapter (for use with Threaded Drill Bits)
Toggle Clamps (2”) – Qty 3
Tool Box Roll-Away (preferably machinist chest)
Wrench Set Open/ Box End Combination (1/4” thru 9/16”)

Aircraft Mech

ROLLAWAY TOOLBOX, 5 DRAWER (MINIMUM) / 8 DRAWER PREFERRED
¼” DRIVE STEP-UP ADAPTER
10” BREAKER BAR (3/8” DRIVE)
10” CRESCENT WRENCH
10” SCREWDRIVER, #3
12 OZ SMALL BALLPEEN HAMMER
12” EXTENSION, ¼ DRIVE
12” EXTENSION, 3/8 DRIVE
14” BREAKER BAR (1/2” DRIVE)
16 OZ RUBBER HAMMER
3/8” DRIVE STEP-DOWN ADAPTER
3” EXTENSION, ¼ DRIVE
3” EXTENSION, 3/8 DRIVE
6” BREAKER BAR (1/4" DRIVE)
6” CRESCENT WRENCH
6” EXTENSION, ¼ DRIVE
6” EXTENSION, 3/8 DRIVE
8” CRESCENT WRENCH
ALLEN WRENCHES: 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64”, 3/32", 5/64", 1/16", 0.05
APEX TIP HOLDER, ¼”
APEX TIP SOCKET #2, ¼ DRIVE
APEX TIP SOCKET #2, 3/8 DRIVE
ASSORTED APEX TIP SET
COMBINATION WRENCHES, 12 POINT (SIZES: ¼ TO 1-1/8)
COTTER KEY REMOVAL TOOL
CROWS FOOT, 3/8 DRIVE (SIZES: 3/8 TO 1-1/4)
DEEP SOCKETS, 3/8 DRIVE, 12 POINT (SIZES: ¼ TO 1-1/8)
FLASHLIGHT
FORD WRENCH
INSIDE, SNAP RING PLIERS
INSPECTION MIRROR (ROUND)
MAGNET, TELESCOPING
MECHANICAL FINGER
NEEDLE NOSE VISE GRIP PLIERS
NUT SPINNER SET (SIZES: 5/16” TO 7/16”)
OFFSET PHILIPPS SCREWDRIVER
OFFSET STRAIGHT SLOT SCREWDRIVER
OUTSIDE, SNAP RING PLIERS
PLIERS, 45 DEGREE NEEDLE NOSE
PLIERS, CHANNEL LOCK, MEDIUM SIZE
PLIERS, DIKES
PLIERS, DUCKBILL
PLIERS, NEEDLE NOSE
PLIERS, SAFETY WIRE
PLIERS, SLIP JOINT
PLIERS, VISE GRIP
PLIERS, WIRE CUTTER
PUNCH SET (1/8, 5/32, 3/16, ½ CHISSEL)
PUTTY KNIFE
RATCHET WRENCH, (DOG BONE) (7/8” X 11/16")
RATCHET WRENCH, (DOG BONE) (3/4” X 5/8")
RATCHET WRENCH, (DOG BONE) (9/16” X 1/2")
RATCHET WRENCH, (DOG BONE) (7/16” X 3/8")
RATCHET WRENCH, (DOG BONE) (1/4” X 5/16")
RATCHET, ¼ DRIVE
RATCHET, 3/8 DRIVE
SCISSORS
SCREWDRIVER, PHILLIPS (6”)
SCREWDRIVER, PHILLIPS (8”)
SCREWDRIVER, PHILLIPS (10”)
SCREWDRIVER, PHILLIPS (STUBBY)
SCREWDRIVER, STRAIGHT SLOT (6”)
SCREWDRIVER, STRAIGHT SLOT (8”)
SCREWDRIVER, STRAIGHT SLOT (10”)
SCREWDRIVER, STRAIGHT SLOT (STUBBY)
SCRIBE, 90 DEGREE
SHORT SOCKETS, 3/8 DRIVE, 12 POINT (SIZES: ¼ TO 1-1/8)
SMALL NEEDLE NOSE VISE GRIP PLIERS
SOCKETS, ¼ DRIVE, 12 POINT (SIZES: 9/32” TO 9/16”)
SOCKETS, 3/8 DRIVE, 12 POINT (SIZES: ¼ TO 7/8)
SPEED HANDLE
UNIVERSAL JOINT (1/4" DRIVE)
UNIVERSAL JOINT (3/8" DRIVE)
UNIVERSAL JOINT (1/2" DRIVE)

Machinist

Roll-Away Tool Box30” w/ 5 drawers (Minimum)
Reamer Set.321, .281, 15/64", 5/32"
Snap Guide Set1/2", 3/4", 1 1/8"
Drill Guide
Metal Ruler6"
Thread GaugeNon Calibrated
Wrench Set, Allen1/16", 5/64", 3/32", 7/64", 1/8", 9/64"
File Set, JewelerPointed, Flat, Square, Round
Socket Set, 3/8" Dr.3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"
Ratchet, 3/8" Dr.
Extension, 3/8" Dr.3"
Punch Set1/32", 1/16", 3/32"
Screwdriver Set, Phillip#2 X 1 1/2", #1 X 3", #2 X 4"
Screwdriver Set, Straight1/4" X 1 1/2", 3/16" X 3", 1/4" X 4"
File SetFlat, Triangle
Chisel, Cold
Magnet, Telescoping
Inspection Mirror
Flashlight
Magnifying Glass
Knife, Utility W/ 5 Blades
Metal Scrapper
Measuring Tape10'
"C" Clamp Set (x3)1-1/4", 2", 3"
Wrench Set, Combo3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"
Hammer, Ball Peen
Mallet, Soft Face
Plier, Needle Nose, Locking
Plier, Vise Grip
Plier6"
Wrench, Adjustable6"
Plier SetNeedle Nose, Diagonal Cutter
Sanding Stone Set, Rotary5/8" Round, Flat, Cone, Pointed (Long), Pointed (Small)
Grinder
Grinder, 90 Deg.
Drill90 Deg.
Drill3/8" Dr.
Air Hose25'

Aircraft Electrician

Tool Box:
Roll-Away Tool Box 30” w/ 5 drawers (Minimum)
Screw drivers:
Phillips #0, # 1, # 2 & Stubby
Straight #0, # 1, # 2 & Stubby
Offset Combo #1, #2
Hex Driver 1/4” Bit
Bit Ratchet 1/4"Bit Set W/ Holder (Small Set Minimum: - PH1, PH2 3/16, 1/4, T15 T20, T25)
Pliers:
Safety Wire 9”
Diagonal-Cutting 8”
Needle Nose 8”
Bent Needle Nose 6”
Channel Lock 12”
Vise Grip 7”
Vise Grip Long Nose 7”
Cannon Plug
Wire Striper/Cutter
End-Cutting Mini
Diagonal-Cutting Mini
Long Needle Nose Mini
Bent Needle Nose Mini
Flat Nose Mini
Wrenches:
Allen (hex) Set SAE
Speed-Handle 3/8”
Combo Open/Close SAE 12 Pt (Sizes:- 7/8, 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16, 1/4)
Socket Ratchet 3/8”
Socket Ratchet 1/4”
Socket Set SAE 3/8” 6 Pt (Sizes:- 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16)
Socket Set SAE 1/4” 12 Pt (Sizes:- 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16 )
Socket Extension 3/8” (6” & 3”)
Socket Extension 1/4” (4” & 2”)
U-Joint Swivel Extension (3/8” & 1/4”)
Apex Socket Adapter 3/8”
Socket Adapter (1/4” F x 3/8” M & 3/8” F x 1/4" M)
Breaker Bar 3/8”
Miscellaneous Tools:
Awl
X-Acto Knife
Hamer, Ballpeen 16 oz.
Hamer, Mallet Soft
Tape, Measuring
Rule, Steel 6”
Hemostat, Straight
Hemostat, Curved
Scribe, (Straight, Hooked & 90 Deg.)
Flash Light (preferably digital)
Magnifying Glass
Magnet, Telescoping
Inspection Mirror, Round
Heat Gun
Extension Cord 50 ft.
Work Lamp (Enclosed light)
Tool Bag

ECS Flight Line Mech

Tool Box:
Roll-Away Tool Box 30” w/ 5 drawers (Minimum)
Screw drivers:
Phillips #0, # 1, # 2 & Stubby
Straight #0, # 1, # 2 & Stubby
Offset Combo #1, #2
Hex Driver 1/4” Bit
Bit Ratchet 1/4"Bit Set W/ Holder (Small Set Minimum: - PH1, PH2 3/16, 1/4, T15 T20, T25)
Pliers:
Safety Wire 9”
Diagonal-Cutting 8”
Needle Nose 8”
Bent Needle Nose 6”
Channel Lock 12”
Vise Grip 7”
Vise Grip Long Nose 7”
Cannon Plug
Wire Striper/Cutter
End-Cutting Mini
Diagonal-Cutting Mini
Long Needle Nose Mini
Bent Needle Nose Mini
Flat Nose Mini
Wrenches & Sockets:
Allen (hex) Set SAE
Speed-Handle 3/8”
Combination Wrench(s) 7/8”, 3/4", 11/16", 5/8", 9/16", 1/2", 7/16", 3/8", 5/16", 1/4"
Socket Ratchet 3/8”
Socket Ratchet 1/4”
Socket Set SAE 3/8” 6 Pt (Sizes:- 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16)
Socket Set SAE 1/4” 12 Pt (Sizes:- 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16 )
Socket Extension 3/8” (6” & 3”)
Socket Extension 1/4” (4” & 2”)
U-Joint Swivel Extension (3/8” & 1/4”)
Apex Socket Adapter 3/8”
Socket Adapter (1/4” F x 3/8” M & 3/8” F x 1/4" M)
Breaker Bar 3/8”
Miscellaneous Tools:
Awl
X-Acto Knife
Hamer, Ballpeen 16 oz.
Hamer, Mallet Soft
Tape, Measuring
Rule, Steel 6”
Hemostat, Straight
Hemostat, Curved
Scribe
Flash Light (preferably digital)
Magnifying Glass
Magnet, Telescoping
Inspection Mirror, Round
Heat Gun
Extension Cord 50 ft.
Work Lamp (Enclosed light)
Tool Bag

File details come from the government source that posted it. Updated .