Attachment_D_-_Irrigation_Drawings.pdf

V-1

2"

V-2

2"

V-3

2"

V-4

2"

V-5

2"

V-6

2"

V-7

2"

V-8

2"

V-9

2"

V-10

2"

V-11

2"

V-12

2"

V-13

2"

V-14

2" -

V-15

2" - V-16

2"

V-17

2" -

V-18

2" - V-19

2"

V-20

2"

V-21

2" -

V-22

2"

V-23

2"

V-24

2"

V-25

2"

1V

V-26

2"

V-27

2"

V-28

2" -

V-29

2"

V-30

2"

V-31

2"

V-32

2"

V-33

2"

U-1

2"

U-2

2" -

U-3

2" - U-4

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

1257+

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

IR -1.01

AUTOMATIC

CONTROLLER "1"

CONVERSION

PLAN

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

IRRIGATION CONTROLLER "1"

REMOVE EXISTING IRRIGATION CONTROLLER AND RETURN TO OWNER. PROVIDE

AND INSTALL NEW 'SITE ONE' WEATHERTRAK SA10-WT3-36-AX/WTOF-KEY, 36

STATION PRO3 CLIENT AUTOMATIC CONTROLLER "1" RETROFIT KIT FOR

INSTALLATION WITHIN EXISTING VANDAL RESISTANT STAINLESS STEEL ENCLOSURE.

NEW CONTROLLER SHALL INCLUDE A TEN (10) YEAR DATA PLAN. CONTROLLER

SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4 IRRIGATION

CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION CONTROLLER

INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK CONTROLLER

INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION CONTROLLER HAS

BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S REQUIREMENTS

AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL WORK SHALL

COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO "EXISTING

IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR

ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH

(949) 285-4048 FOR INSTALLATION ASSISTANCE.

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

M A

TC

H

LI

N

E

SE

E

B

EL

O W

L

EF

T

EDINGER AVENUE

M A

TC

H

LI

N

E

SE

E

A B

O V

E

RI

G H

T

EDINGER AVENUE

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

NOTE

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND NO REPAIRS ARE NECESSARY.

ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS

SHALL OCCUR WITH NO ADDITIONAL COST TO THE OWNER.

EXISTING AUTOMATIC CONTROLLER "V" WILL BE

UPGRADED TO NEW AUTOMATIC CONTROLLER

"1". ALL VALVE IDENTIFICATION WORK WILL USE

THE NEW STATION NUMBERS DESIGNATED FOR

NEW AUTOMATIC CONTROLLER "1".

EXISTING IRRIGATION CONTROLLER "V" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve in the field.*

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "1" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "1" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5. Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation

(See Irrigation Details for additional information).

6. Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

EXISTING CONTROLLER REMOVAL

7. Record all scheduling parameters within existing controller for each electric control valve station.

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK Optiflow ET controller per manufacturer's specifications (See Irrigation Controller "1" note and Irrigation

Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

ATTACHMENT D - IRRIGATION DRAWINGS Page 1 of 9

T-15

2"

T-6

2"

T-8

2"

T-9

2"

T-10

2" -

T-11

2"

T-12

2"

T-14

2"

T-16

2"

T-17

2"

T-18

2"

T-19

2"

T-20

2"

T-21

2"

T-22

2"

T-7

2"

T-23

2"

T

T-13

2"

U-1

2"

U-2

2" -

U-3

2" - U-4

2"

U-5

2" -

U-6

2"

U-7

2"

U-8

2"

U-9

2"

U-10

2"

U-11

2"

U-12

2"

U-13

2"

U-14

2"

U-15

2"

U-16

2"

U-17

2"

U-18

2"

U-19

2"

U-20

2"

U-21

2"

U-22

2"

U-23

2"

U

S-17

2"

S-18

2"

S-19

2"

R-20

2"

R-21

2"

R-22

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.02

AUTOMATIC

CONTROLLER "2"

CONVERSION

PLAN

IRRIGATION CONTROLLER "2"

REMOVE EXISTING METERED IRRIGATION CONTROLLER PEDESTAL ASSEMBLY AND

RETURN TO OWNER. PROVIDE AND INSTALL NEW 'SITE ONE' WEATHERTRAK

SA5-WT3-24-AX/WTOF-KEY, METERED PEDESTAL ASSEMBLY WITH CONTROLLER

ENCLOSURE OPTION AND 24 STATION PRO3 CLIENT AUTOMATIC CONTROLLER

"2". NEW CONTROLLER SHALL INCLUDE A TEN (10) YEAR DATA PLAN.

CONTROLLER SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4

IRRIGATION CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION

CONTROLLER INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK

CONTROLLER INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION

CONTROLLER HAS BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S

REQUIREMENTS AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL

WORK SHALL COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO

"EXISTING IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR

ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH

(949) 285-4048 FOR INSTALLATION ASSISTANCE.

EDINGER AVENUE

12RT+

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING IRRIGATION CONTROLLER "U" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "2" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "2" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5. Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation

(See Irrigation Details for additional information).

6. Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "2" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND NO REPAIRS ARE NECESSARY.

ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS

SHALL OCCUR WITH NO ADDITIONAL COST TO THE OWNER.

NOTE

EXISTING AUTOMATIC CONTROLLER "U" WILL BE

UPGRADED TO NEW AUTOMATIC CONTROLLER

"2". ALL VALVE IDENTIFICATION WORK WILL USE

THE NEW STATION NUMBERS DESIGNATED FOR

NEW AUTOMATIC CONTROLLER "2".

ATTACHMENT D - IRRIGATION DRAWINGS Page 2 of 9

S-17

2"

S-18

2"

S-19

2"

R-20

2"

R-21

2"

R-22

2"

T-15

2"

T-1

2"

T-2

2"

T-3

2"

T-4

2"

T-6

2"

T-5

2"

T-8

2"

T-9

2"

T-10

2" -

T-11

2"

T-12

2"

T-14

2"

T-16

2"

T-17

2"

T-18

2"

T-19

2"

T-20

2"

T-21

2"

T-22

2"

T-7

2"

T-23

2"

T-13

2"

3T

U-7

2"

U-8

2"

U-9

2"

U-10

2"

U-11

2"

U-12

2"

U-13

2"

U-14

2"

U-15

2"

U-16

2"

U-17

2"

U-18

2"

U-19

2"

U-20

2"

U-21

2"

U-22

2"

U-23

2"

M-1

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.03

AUTOMATIC

CONTROLLER "3"

CONVERSION

PLAN

IRRIGATION CONTROLLER "3"

REMOVE EXISTING IRRIGATION CONTROLLER AND RETURN TO OWNER. PROVIDE

AND INSTALL NEW 'SITE ONE' WEATHERTRAK SA10-WT3-24-AX/WTOF-KEY, 24

STATION PRO3 CLIENT AUTOMATIC CONTROLLER "3" RETROFIT KIT FOR

INSTALLATION WITHIN EXISTING VANDAL RESISTANT STAINLESS STEEL ENCLOSURE.

NEW CONTROLLER SHALL INCLUDE A TEN (10) YEAR DATA PLAN. CONTROLLER

SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4 IRRIGATION

CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION CONTROLLER

INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK CONTROLLER

INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION CONTROLLER HAS

BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S REQUIREMENTS

AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL WORK SHALL

COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO "EXISTING

IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR

ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH

(949) 285-4048 FOR INSTALLATION ASSISTANCE.

EDINGER AVENUE

12RT+

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING IRRIGATION CONTROLLER "T" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "3" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "3" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5. Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation

(See Irrigation Details for additional information).

6. Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "3" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND NO REPAIRS ARE NECESSARY.

ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS

SHALL OCCUR WITH NO ADDITIONAL COST TO THE OWNER.

NOTE

EXISTING AUTOMATIC CONTROLLER "T" WILL BE

UPGRADED TO NEW AUTOMATIC CONTROLLER

"3". ALL VALVE IDENTIFICATION WORK WILL USE

THE NEW STATION NUMBERS DESIGNATED FOR

NEW AUTOMATIC CONTROLLER "3".

ATTACHMENT D - IRRIGATION DRAWINGS Page 3 of 9

U-20

2"

U-21

2"

U-22

2"

U-23

M-1

2"

M-3

2" -

M-4

2"

M-5

2"

M-6

2"

M-7

2"

M-8

2"

M-9

2"

M-10

2"

M-12

2"

O-1

2"

O-5

2"

O-6

11 "

P-1

2"

P-23

2"-

P-24

2"- S-1

2"

S-2

2"

S-5

2"

S-7

2"

S-9

2"

S-10

2"

S-11

2"

S-3

2"

S-8

2"

S-20

2"

S-21

2"

S-12

2"

S-22

2"

S-13

2"

S-14

2"

S-15

2"

S-16

2"

S-17

2"

S-18

2"

S-19

2"

R-1

2"

R-2

2"

R-3

2"

R-4

2"

R-5

2"

R-6

2"

R-7

2"

R-8

2"

R-10

2"

R-11

2"

R-12

2"

R-13

2"

R-14

2"-

R-15

2"

R-16

2"-

R-17

2"

R-18

2"

R-19

2"

R-20

2"

R-21

2"

R-22

2"

R

S

R-9

2"

S-4

2"

S-23

2"

S-?

2"

T-15

2"

T-6

2"

T-5

2"

T-16

2"

T-17

2"

T-18

2"

T-19

2"

T-7

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.04

AUTOMATIC

CONTROLLER "4"

CONVERSION

PLAN

IRRIGATION CONTROLLER "4"

REMOVE EXISTING IRRIGATION CONTROLLERS AND RETURN TO OWNER. PROVIDE

AND INSTALL ONE (1) NEW 'SITE ONE' WEATHERTRAK SA01-WT3-48-AX/WTOF-KEY,

48 STATION PRO3 CLIENT AUTOMATIC CONTROLLER "4" ON RESTROOM UTILITY

ROOM WALL. NEW CONTROLLER SHALL INCLUDE TEN (10) YEAR DATA PLAN.

CONTROLLER SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4

IRRIGATION CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION

CONTROLLER INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK

CONTROLLER INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION

CONTROLLER HAS BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S

REQUIREMENTS AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL

WORK SHALL COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO

"EXISTING IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR

ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH

(949) 285-4048 FOR INSTALLATION ASSISTANCE.

EDINGER AVENUE

1ORT+

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING IRRIGATION CONTROLLERS "R" AND "S" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "4" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "4" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5.

6.

Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation (See Irrigation Details for additional information).

Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "4" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND NO REPAIRS ARE NECESSARY.

ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS

SHALL OCCUR WITH NO ADDITIONAL COST TO THE OWNER.

NOTE

EXISTING AUTOMATIC CONTROLLERS "R" AND "S"

WILL BE UPGRADED AND COMBINED TO A SINGLE

NEW AUTOMATIC CONTROLLER "4". ALL VALVE

IDENTIFICATION WORK WILL USE THE NEW

STATION NUMBERS DESIGNATED FOR NEW

AUTOMATIC CONTROLLER "4".

ATTACHMENT D - IRRIGATION DRAWINGS Page 4 of 9

M-15

S-5

2"

S-7

2"

S-3

2"

S-8

2"

R-1

2"

R-2

2"

R-3

2"

R-4

R-7

2"

R-8

2"

R-12

S-4

2"

O-1

2"

O-2

2"

O-3

2"

O-4

2"

O-5

2"

O-6

2"

O-7

2"

O-8

2"

O-9

2"

MBFP

P-1

2"

P-2

2"

P-3

2"

P-4

2"

P-5

2"

P-6

2"

P-7

2"

P-8

2"

P-10

2"

P-11

2"

P-12

2"

P-13

2"

P-14

2"

P-9

2"

P-16

2"

P-15

2"

P-17

2"

P-18

2"

P-21

2"

P-22

2"

P-20

2"

Q-1

2"

Q-2

2" -

Q-3

2"

Q-4

2"

Q-5

2"

Q-6

2"-

Q-7

2"

Q-8

2"

Q-9

2"

Q-10

2"

P-23

2"-

P-24

2"

FS

O

P

Q

M9-FS M9-FS M9-FS M9-FS M9-FS

M

9-FS

M

9-FS

M-15

FH-1

1"

FH-2

1"

FH-3

FH-6

1"

FH-15

1"

FH-16

1"

FH

FH-7

2"

FH-8

2"

FH-9

2"

FH-10

2"

FH-11

2"

FH-12

2"

FH-13

2"

N-10

2"

N-11

2"

N-12

2"

N-15

2"

N-16

2"

N-13

2"

O-14

2"

O-15

2"

O-20

2"

Q-11

2"

Q-12

2"

Q-13

2"

Q-14

2"

Q-15

2"

Q-16

2"

Q-17

2"-

Q-18

2"- Q-19

2"

Q-20

2"

Q-21

2"

Q-22

2"

Q-23

2"

Q-24

2"

N-10

2"

N-11

2"

N-12

2"

N-15

2"

N-16

2"

N-13

2"

FH-3

1"

FH-4

1"

FH-5

1"

AR-4

1"

AR-5

AR-11

1"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.05

AUTOMATIC

CONTROLLER "5"

CONVERSION

PLAN

IRRIGATION CONTROLLER "5"

REMOVE EXISTING IRRIGATION CONTROLLERS AND RETURN TO OWNER. PROVIDE

AND INSTALL ONE (1) NEW 'SITE ONE' WEATHERTRAK SA01-WT5-72-AX, 72

STATION OXR MANAGER AUTOMATIC CONTROLLER "5" ON RESTROOM UTILITY

ROOM WALL. NEW CONTROLLER SHALL INCLUDE TEN A (10) YEAR DATA PLAN.

CONTROLLER SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4

IRRIGATION CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION

CONTROLLER INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK

CONTROLLER INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION

CONTROLLER HAS BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S

REQUIREMENTS AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL

WORK SHALL COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO

"EXISTING IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR

ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH

(949) 285-4048 FOR INSTALLATION ASSISTANCE.

EDINGER AVENUE

NOR7H

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING IRRIGATION CONTROLLERS "O", "P" AND "Q" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3.

4.

Heat stamp station number as controlled by new automatic controller "5" on electric control valve box lid (See Irrigation Details for additional information).

Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "5" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5. Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation (See Irrigation Details for additional information).

6. Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "5" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY R-9COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIE.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE

INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY AUTOMATIC CONTROLLER

BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE

FIELD PRIOR TO START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF

THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE

EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO

THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO

PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED

DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING

IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE

OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND

NO REPAIRS ARE NECESSARY. ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT

HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS

SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO

REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS SHALL OCCUR WITH NO ADDITIONAL

COST TO THE OWNER.

NOTE

EXISTING AUTOMATIC CONTROLLERS "O", "P" AND "Q"

WILL BE UPGRADED AND COMBINED TO A SINGLE NEW

AUTOMATIC CONTROLLER "5". ALL VALVE IDENTIFICATION

WORK WILL USE THE NEW STATION NUMBERS DESIGNATED

FOR NEW AUTOMATIC CONTROLLER "5".

MATCHLINE - SEE ABOVE LEFT

MATCHLINE - SEE BELOW RIGHT

EU

C

LI

D

S

TR

EE

T

EU

C

LI

D

S

TR

EE

T

MASTER VALVE / FLOW SENSOR ASSEMBLY

PROVIDE AND INSTALL NEW 6" MASTER VALVE AND FLOW SENSOR ASSEMBLY

DOWNSTREAM OF EXISTING BACKFLOW PREVENTER ASSEMBLY AT THIS LOCATION

AS SHOWN. EXACT LOCATION SHALL BE DETERMINED IN THE FIELD. RE-CONNECT

MASTER VALVE AND FLOW SENSOR ASSEMBLY BACK TO EXISTING PRESSURE

MAINLINE PIPING. CONNECT AS REQUIRED TO SUPPLY ALL EXISTING IRRIGATION

SYSTEMS WITH WATER. PROVIDE AND INSTALL NEW MASTER VALVE / FLOW SENSOR

CABLE WITHIN 1-1/2" CONDUIT FROM NEW MASTER VALVE AND FLOW SENSOR

ASSEMBLY TO NEW AUTOMATIC CONTROLLER "5" AS SHOWN. CONNECT AS

REQUIRED SO THAT THE NEW MASTER VALVE AND FLOW SENSOR ASSEMBLY CAN

BE CONTROLLED BY ALL NEW WEATHER TRAK CONTROLLERS ON THE NEW

NETWORK. CONTACT ERIK ANDERSON AT SITEONE GREENTECH (949) 285-4048 FOR

COMMUNICATION ASSISTANCE.

ATTACHMENT D - IRRIGATION DRAWINGS Page 5 of 9

M- M-14

2"

M-15

2"

M-16

2"

N-18

2"

N-16

2"

N-13

2"

M

N M-

M-14

2"

M-15

2"

M-16

2"

N-18

2"

N-16

2"

N-13

2"

M

N

AR-14

AR-15

1"

O-1

2"

O-2

2"

O-3

2"

O-4

2"

O-5

2"

O-6

2"

O-7

2"

O-8

2"

O-9

2"

MBFP

O-14

2"

O-15

2"

O-20

2"

-1 2"

Q-1

2"

Q-2

2" -

Q-3

2"

Q-4

2"

Q-5

2"

Q-6

2"-

Q-7

2"

Q-8

2"

Q-9

2"

Q-10

2"

Q-11

2"

Q-12

2"

Q-13

2"

FS

M 9-F6

FH-1

1"

FH-2

1"

FH-3

1"

FH-4

1"

FH-5

1"

FH-6

1"

FH-15

1"

FH-16

1"

FH

FH-7

2"

FH-8

2"

FH-9

2"

FH-10

2"

FH-11

2"

FH-12

2"

FH-13

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.06

AUTOMATIC

CONTROLLER "6"

CONVERSION

PLAN

IRRIGATION CONTROLLER "6"

REMOVE EXISTING IRRIGATION CONTROLLERS AND RETURN TO OWNER. PROVIDE

AND INSTALL ONE (1) NEW 'SITE ONE' WEATHERTRAK SA01-WT3-24-AX/WTOF-KEY,

24 STATION PRO3 CLIENT AUTOMATIC CONTROLLER "6" ON OUTDOOR WALL.

NEW CONTROLLER SHALL INCLUDE TEN (10) YEAR DATA PLAN. CONTROLLER

SHALL BE INSTALLED BY A WEATHERTRAK LEVELS 1 THROUGH 4 IRRIGATION

CERTIFIED MANAGER. AT COMPLETION OF IRRIGATION CONTROLLER

INSTALLATION, THE CONTRACTOR SHALL OBTAIN A WEATHERTRAK CONTROLLER

INSPECTION REPORT (CIR) INDICATING THAT THE IRRIGATION CONTROLLER HAS

BEEN INSTALLED IN ACCORDANCE WITH THE MANUFACTURE'S REQUIREMENTS

AND WITH THE IRRIGATION SPECIFICATIONS. ALL ELECTRICAL WORK SHALL

COMPLY WITH ALL APPLICABLE ELECTRICAL CODES. REFER TO "EXISTING

IRRIGATION CONTROLLER REPLACEMENT NOTES" ON THIS SHEET FOR ADDITIONAL

INFORMATION. CONTACT ERIK ANDERSON AT SITEONE GREENTECH (949)

285-4048 FOR INSTALLATION ASSISTANCE.

NOR7H

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'

R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING IRRIGATION CONTROLLER "FH" REPLACEMENT NOTES

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "6" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "6" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5.

6.

Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation (See Irrigation Details for additional information).

Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "6" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION. FAILURE TO COMPLETE AN EVALUATION OF THE EXISTING IRRIGATION SYSTEMS, AND REPORTING DEFICIENCES TO THE OWNER, WILL CAUSE THE OWNER TO ASSUME THAT THE EXISTING IRRIGATION SYSTEMS ARE FULLY OPERATIONAL AND NO REPAIRS ARE NECESSARY.

ANY DAMAGE DISCOVERED AFTER THE EVALUATION REPORT HAS BEEN SUBMITTED TO THE OWNER, OR IN THE EVENT THAT NO EVALUATION REPORT WAS SUBMITTED TO THE OWNER, IT SHALL BECOME THE RESPONSIBILITY OF THE CONTRACTOR TO REPAIR THE DAMAGED IRRIGATION SYSTEMS. THIS

SHALL OCCUR WITH NO ADDITIONAL COST TO THE OWNER.

NOTE

EXISTING AUTOMATIC CONTROLLER "FH" WILL BE

UPGRADED TO NEW AUTOMATIC CONTROLLER

"6". ALL VALVE IDENTIFICATION WORK WILL USE

THE NEW STATION NUMBERS DESIGNATED FOR

NEW AUTOMATIC CONTROLLER "6".

ATTACHMENT D - IRRIGATION DRAWINGS Page 6 of 9

R-1

2"

R-2

2"

R-3

2"

R-4

2"

R-5

2"

R-6

2"

R-7

2"

-1 2" 4 R

S

AR-8

1"

AR-9

1"

AR-10

1" -

AR-11

1"

AR-12

1"

AR-13

1"

AR-14

1"

AR-15

1"

O-1

2"

O-2

2"

O-3

2"

O-4

2"

O-5

2"

O-6

2"

O-7

2"

O-8

2"

O-9

2"

MBFP

P-21

2"

P-22

2"

O-14

2"

O-15

2"

O-20

2"

P-20

2"

Q-1

2"

Q-2

2" -

Q-3

2"

Q-4

2"

Q-5

2"

Q-6

2"-

Q-7

2"

Q-8

2"

Q-9

2"

Q-10

2"

Q-11

2"

Q-12

2"

Q-13

2"

FS

O

P

Q

M9-F6 M9-F6 M9-F6 M9-F6 M9-F6

M 9-F6

M 9-F6

M-1

2"

M-3

2" -

M-4

2"

M-5

2"

M-6

2"

M-7

2"

M-8

2"

M-9

2"

M-10

2"

M-11

2"

M-12

2"

M-13

2"

M-14

2"

M-15

2"

M-16

2"

N-10

2"

N-11

2"

N-12

2"

N-15

2"

N-18

2"

N-16

2"

N-13

2"

M

N

FH-1

1"

FH-2

1"

FH-3

1"

FH-4

1"

FH-5

1"

FH-6

1"

FH-15

1"

FH-16

1"

FH

FH-7

2"

FH-8

2"

FH-9

2"

FH-10

2"

FH-11

2"

FH-12

2"

FH-13

2"

Date

Project Number Drawn By Checked By Date

Description : By

24010.00 ddp ddp

10/25/24

Sheet Title :

Sheet Number :

PL

A

N S

ET

Use of the plans and specifications contained herein shall be restricted to the original site for which they were prepared;

publication thereof is expressly limited to such use. Reproduction, publication, or reuse by any method, in whole or in part, without the express written consent of d.d.

Pagano, Inc. is prohibited. Title to said plans remains the sole property of d.d.

Pagano, Inc.; visual contact shall constitute acceptance of these restrictions.

M ile

S qu ar e

R eg io na l P ar k

Eu cl id S t.

Fo un ta in V al le y, C

A

/2

5/ d.d. Pagano inc.

IRRIGATION CONSULTANTS

4705 EAST CHAPMAN AVENUE

ORANGE - CA 92869

(714) 771-9200 FAX (714) 771-9202

N O

T

FO

R C

O N

ST

R

U C

TI

O

N

IR -1.07

AUTOMATIC

CONTROLLER "7"

CONVERSION

PLAN

IRRIGATION CONTROLLER "7"

REMOVE EXISTING IRRIGATION CONTROLLERS AND RETURN TO OWNER.

PROVIDE AND INSTALL ONE (1) NEW 'SITE ONE' WEATHERTRAK

SA01-WT3-48-AX/WTOF-KEY, 48 STATION PRO3 CLIENT AUTOMATIC CONTROLLER

"7" ON RESTROOM UTILITY ROOM WALL. NEW CONTROLLER SHALL INCLUDE TEN

(10) YEAR DATA PLAN. CONTROLLER SHALL BE INSTALLED BY A WEATHERTRAK

LEVELS 1 THROUGH 4 IRRIGATION CERTIFIED MANAGER. AT COMPLETION OF

IRRIGATION CONTROLLER INSTALLATION, THE CONTRACTOR SHALL OBTAIN A

WEATHERTRAK CONTROLLER INSPECTION REPORT (CIR) INDICATING THAT THE

IRRIGATION CONTROLLER HAS BEEN INSTALLED IN ACCORDANCE WITH THE

MANUFACTURE'S REQUIREMENTS AND WITH THE IRRIGATION SPECIFICATIONS.

ALL ELECTRICAL WORK SHALL COMPLY WITH ALL APPLICABLE ELECTRICAL

CODES. REFER TO "EXISTING IRRIGATION CONTROLLER REPLACEMENT NOTES"

ON THIS SHEET FOR ADDITIONAL INFORMATION. CONTACT ERIK ANDERSON AT

SITEONE GREENTECH (949) 285-4048 FOR INSTALLATION ASSISTANCE.

NOR7H

1 inch = ft.

( IN FEET )

50'

50' 25' 50' 100'R

TWO WORKING DAYS BEFORE YOU DIG

Call: TOLL FREE 811 or (800) 422-4133

Underground Service Alert

FOR IRRIGATION LEGENDS, NOTES AND

DETAILS, SEE SHEETS IR-2.00, IR-2.01 AND

IR-2.02.

EXISTING ELECTRIC CONTROL VALVES

1. Confirm location of existing electric control valve*.

2. Confirm existing electric control valve is controlled from station number designated on irrigation plans.

3. Heat stamp station number as controlled by new automatic controller "7" on electric control valve box lid (See Irrigation Details for additional information).

4. Provide and install recycled water ID tag with confirmed station number as controlled by new automatic controller "7" stamped on tag connected to control valve within valve box (See Irrigation Details for additional information).

5. Remove existing wire connectors. Provide and install new GPH GDBRY6 wire connectors. Connect as required for proper automatic operation

(See Irrigation Details for additional information).

6. Existing electric control valve boxes shall be upgraded to the standards shown in the irrigation details. This work shall include, but not be limited to, providing crushed rock under valve, provide clearance under electric control valve, adjusting valve box to finish grade and brick supports under valve box.

7. Create color coded controller chart showing the location of each electric control valve and the area they service.

EXISTING CONTROLLER REMOVAL

8. Label field wires before removing from existing controller.

9. Shut off power to controller.

10. Remove old controller from existing irrigation controller enclosure. Protect enclosure in place.

INSTALLATION OF NEW CONTROLLER

11. Provide and install new WeatherTRAK ET controller per manufacturer's specifications (See Irrigation Controller "7" note and Irrigation Details for additional information).

12. Contractor shall physically ground controller to existing grounding rod. If existing grounding rod does not exist, the contractor shall install a full length grounding rod with minimum #6 bare copper wire.

13. Connect existing 120v service to meet local code requirements.

14. Securely connect 24v field wires to new controller in same confirmed controller station sequence per labeled field wires noted in EXISTING

CONTROLLER REMOVAL note #8.

15. Run a valve test and troubleshoot wiring on any stations showing shorts or no-connects.

16. Repair any shorts or no-connects as required for proper automatic operation.

ACTIVATION OF IRRIGATION CONTROLLER

17. The Contractor shall be responsible for obtaining the services of HydroPoint Data Systems and/or or approved HydroPoint authorized distributor to provide WeatherTRAK OptiFlow XR Controller Commissioning Services. See irrigation specifications for additional information. The Contractor shall be responsible for paying any costs involved for the commissioning services.

PROGRAMMING

18. It shall be the responsibility of the installing contractor to program the irrigation controllers with initial data to provide the water needs of the existing plant material based on site conditions, until the WeatherTRAK OptiFlow XR Controller Commissioning Servicescan be completed.

EXISTING ELECTRIC CONTROL VALVE LOCATION AND STATION NUMBER DESIGNATION DATA WAS REPRODUCED FROM ORANGE COUNTY COMMUNITY RESOURCES - OC PARKS ARCGIS WEBSITE. ANY DISCREPANCIES IN THE DATA SHALL BE ADDRESSED IN THE FIELD.

NOTE: ALL SYMBOLS ON PLAN SHEETS SHOWN IN GRAY TONE INDICATE EXISTING ELECTRIC

CONTROL VALVES SERVICED BY ANOTHER AUTOMATIC CONTROLLER. ALL SYMBOLS ON PLAN

SHEETS SHOWN IN SOLID TONE INDICATE EXISTING ELECTRIC CONTROL VALVES SERVICED BY

AUTOMATIC CONTROLLER BEING UPGRADED. VERIFY EXISTING CONDITIONS IN THE FIELD PRIOR TO

START OF WORK.

PRIOR TO THE START OF WORK, THE CONTRACTOR SHALL INVESTIGATE THE CONDITION OF THE EXISTING IRRIGATION SYSTEMS DESIGNATED TO REMAIN. ANY DAMAGE TO THE EXISTING IRRIGATION SYTEMS DISCOVERED BY THE INVESTIGATION, SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER. THE OWNER WILL AUTHORIZE THE CONTRACTOR TO PREPARE A BID FOR THE REPAIR OF THE DAMAGED IRRIGATION SYSTEMS AS DETERMINED DURING THE INVESTIGATION.