A035 _ Electronic Diagnostics Testability Analysis Report.pdf

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages

Adobe Professional 8.0

18. ESTIMATED

TOTAL PRICE

17. PRICE GROUP

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate

(0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

TBD

B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER X

D. SYSTEM/ITEM

Type I FOATC

E. CONTRACT/PR NO.

W56HZV-19-R-0118

F. CONTRACTOR

TBD

1. DATA ITEM NO.

A035

2. TITLE OF DATA ITEM

Technical Report - Study/Services

3. SUBTITLE

Electronic Diagnostics Testability Analysis Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B (T)

5. CONTRACT REFERENCE

C.2.6.1

6. REQUIRING OFFICE

SFAE-CSS-FP

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

C**

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft

Final

Reg Repro

16. REMARKS

Block 4: Delete Section 2. Format under Requirements:

- The analysis shall identify all OEM electronic diagnostic fault codes for each component, assemblies, systems and subsystems and place them on a tabular format spread sheet. The codes shall be called out with the component, assemblies, systems and subsystems they support. The columns of the spread sheet shall consist of component, fault code/description, tests being performed, test equipment and parameters.

- The report shall include a detailed description of on-board electronic diagnostic systems that may be interrogated for the purpose of maintenance and troubleshooting via an on-board diagnostic display screen. The report shall also include a detailed description of all

Intrusive Diagnostics which will be required. Details of procedures to install firmware/software updates shall be called out in this report.

- The report shall identify all the commercially available diagnostic software for all electronically controlled systems, subsystems, components and assemblies.

- The report shall identify all OEM electronic diagnostic special tests (cylinder cutout, injector misfire, compression unbalance, hydraulic shift solenoid tests etc.….) for each component, assemblies, systems and subsystems they support.

- The Contractor shall maximize the use of embedded Built-in-Test (BIT)/ Built-in Test

Equipment (BITE) diagnostic capabilities, and fully document and support embedded system software.

- All data buses and diagnostic connectors for each electronic control module shall be identified in detail.

- **DD 250 required for final deliverable.

Block 10, 12 and 13: The contractor shall submit the initial report 60 calendar days after contract award. The Government will review the draft report and provide comments within

45 calendar days after receipt. The contractor shall correct and provide final corrected copy to the Government NLT 30 calendar days after receipt of Government comments. The report shall be in the contractor’s format.

* See Attachment 0008 – Type I FOATC POC List for distribution information.

PO* 1 1

APM* 1 1

System Engineer* 1 1

COR* 1 1

TACOM TMDE* 1 1

15. TOTAL 5 0 5

G. PREPARED BY

H. DATE I. APPROVED BY J. DATE