7-Sec 01 22 00 - MEASUREMENT AND PAYMENT.pdf

MEASUREMENT AND PAYMENT

01 22 00-1

SECTION 01 22 00

MEASUREMENT AND PAYMENT

PART 1 - GENERAL

1.01. SECTION INCLUDES

A. Measurement and payment criteria applicable to the Work performed under a unit price payment method.

1.02. PROCEDURE

A. All measurements for payment will be based on completed work, performed in strict accordance with the Drawings and Project Manual, and with the Agreement’s “Schedule of Bid Items”.

B. The Resident Project Representative shall take all measurements and compute quantities relative to all work completed under the Agreement in accordance with the methods included in this section. CONTRACTOR shall assist by providing necessary equipment and personnel as required.

C. In cases where the payment clause for an item in this section relating to any unit or lump sum price requires that the said unit or lump sum price cover and be considered compensation for certain work or material essential to the item, this same work or material shall not be measured or paid for under any other item which may appear elsewhere in this section.

PART 2 - PRODUCTS

Not Used

PART 3 - EXECUTION

3.01. DEMOLITION

A. Measurement is lump sum and constitutes furnishing all materials and equipment necessary to complete the work associated with this contract.

B. Payment shall be made at the contract unit price as determined in the Bid Schedule and in accordance with the schedule specified in Section 02 41 16 “Demolition”. This is a lump sum item for the entire contract. This price shall include furnishing all materials, labor and equipment necessary to complete the work associated with this contract. This item shall include demolition, removal and disposal of all buildings, including foundation slabs, concrete patio, and asphalt as necessary to complete the work. Backfill shall be free of debris, compacted, and free of voids so that settlement doesn’t occur.

3.02. ASBESTOS ABATEMENT

A. Measurement is lump sum and constitutes furnishing all materials and equipment necessary to complete the work associated with this contract and submission of PADEP form 2700-FM- BAQ0021. See Supplemental Conditions Appendix C for the DEP form and Appendix D for the Phase II report for the buildings.

B. Payment shall be made at the contract unit price listed in the Bid Schedule. This price shall include furnishing all materials, labor and equipment necessary to complete the work associated with this contract. This item shall include demolition, removal and disposal of asbestos containing material as necessary to complete the work. This item also includes

MEASUREMENT AND PAYMENT

01 22 00-2 submission of an Asbestos Abatement Specification by the CONTRACOR, for review and approval by the OWNER fourteen (14) days prior to the start of work.

3.03. TOPSOIL

A. There will be no separate line item for topsoil. The topsoil is to be placed in all areas where buildings, patios, retaining walls etc. have been removed. Topsoil shall be placed to provide proper drainage per direction of the Engineer. This shall be for furnishing all labor, materials, and equipment necessary for the installation and fine grading of the topsoil. Topsoil shall be in accordance with Section 32 92 00. All topsoil required to compete the work shall be included.

Payment for topsoil will not be made as it will be made incidental to all other work.

3.04. PERMANENT VEGETATION

A. There will be no separate line item for permanent vegetation. This shall constitute furnishing all labor, materials, equipment, to rake, seed, and fertilize mulch to establish vegetation for all disturbed areas and as directed by the Engineer. Work shall be in accordance with Section 32 92 00. All vegetation required to compete the work shall be included in this item. Payment for permanent vegetation will not be made as it will be made incidental to all other work.

3.05. HAULING AND DISPOSAL OF MATERIAL

A. There will be no separate line item for hauling of demolished and/or waste material from the site. There will be no separate line item for disposal of demolished and/or waste material.

Hauling and disposal includes all labor, materials, equipment, fees and permits to remove all demolished and/or waste material from the site and for proper disposal at a permitted facility.

The OWNER has not arranged a facility for disposal. Contractor shall be responsible for proper disposal of all demolished and/or waste materials. No demolished and/or waste material shall remain on the project site. Payment for hauling and disposal of material will not be made as hauling and disposal of material will be made incidental to all other work.

3.06. HAZARDOUS WASTE REMOVAL

A. Measurement is lump sum and constitutes furnishing all materials and equipment necessary to complete the work associated with this contract and submission of the following

(i) Site Specific Health and Safety Plan

(ii) 40 CFR 761 – Certificate of Disposal and/or Recycling.

(iii) Transporter certification of notification to EPA of their PCB waste activities (EPA Form 7710-53). See Appendix D for the Phase II report for the buildings.

B. Payment shall be made at the contract unit price listed in the Bid Schedule. This price shall include furnishing all materials, labor and equipment necessary to complete the work associated with this contract. This item shall include removal and disposal of hazardous materials as necessary to complete the work. This item also includes submission of the items listed above, for review and approval by the OWNER fourteen (14) days prior to the start of work.

END OF SECTION