ATTACH RFI No.116 SLDAirFrame_ShopDrawings.pdf

SUBMITTAL FOR APPROVAL R0

VA Mather

OR 2, OR 3, OR 5

Job #210240-2 February 24, 2023

BASIS OF DESIGN SET

SLD Technology, Inc.

4243 SE International Way, Suite D Portland, OR 97222

CONFIDENTIALITY NOTICE

This submittal and the documents contained herein are intended solely for the use of the individuals or entities to whom it was addressed. It may contain information that is privileged and confidential in nature, and exempt from disclosure under applicable laws. If the reader of this submittal document is not the intended recipient, or the employee or agent responsible for delivering the document to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of the document is strictly prohibited. If you have received this submittal document in error, please notify us by telephone immediately and delete the original document as well as any and all copies, whole or in part, from your systems.

Thank you.

SLD Technology, Inc.

4243 SE International Way, Suite D

Portland, OR 97222

503-744-0002

Portland, OR 97222

Critical items for approval:

• Locations and heights of any and all attached equipment—including boom plates and imaging rail supports—as well as any other pertinent information (such as plate dimensions)

• Overall system dimensions, as well as move-in path dimensions

• Any and all junction box locations

• Any and all supply air inlet connection locations and dimensions

• Any and all required access panels internal to the system

Please note that all equipment plates to be provided by others and installed in the

AirFRAME system must be received before any fabrication on the project can commence. A delay in the reception of the plates will very likely impact the ship date of the product, and may incur additional cost due to the potential disruption of the manufacturing schedule.

Portland, OR 97222

The attached submittal describes the product that SLD Technology, Inc. (SLD) proposes to have built and delivered for this project. These documents should be carefully reviewed;

any omissions or scope revision should be noted and forwarded back to SLD.

Please return a signed/dated copy of the submittal cover page marked “Approved”, “Approved as Noted”, or “Resubmit”, with any necessary changes well documented.

SLD will begin the procurement and manufacturing process once an “Approved” or

“Approved as Noted” submittal is received.

The project schedule to be determined upon receipt of approved, signed submittals.

The schedule will then be based upon the following:

• The earliest opening in the current manufacturing schedule.

• Long lead-time components.

• Scheduling and corresponding completion of Structural Calculations.

Submittal Contents Layouts & Construction Powder Coat & Sealant Lighting Filters Damper/Diffusers Warranty Installation & Operation

Layouts & Construction

Project name: Date:

Job number: Revision date:

Dash number: Revision:

Quantity: Option:

Tag: Sales Engineer:

Prepared By:

a. Industry: Hospital a. Powder coat: White

b. Product: AirFRAME system b. Caulking: Dow 732 white

a. FAT: Yes a. HEPA filters: Included

b. Witness test of FAT: No b. Grid filter seal: Gel

c. Structural calcs: Yes - electronic copies c. Hinged D/Ds: Yes, one (1) per diffuser opening

d. Perimeter angle: Yes (entire perimeter)

e. UltraLEDs: Not included

a. Install: Not included f. Rail channels: Not included

b. Startup supervision: Not included g. Imaging equip mfr: N/A

c. SAT: None h. Module insulation: Not included

i. Indigo-Clean Included

a. Cleaning:

b. Factory caulking:

c. Packaging:

d. Shipping:

e. Offloading:

a. Tagging:

b. Fire protection:

c. Factory tolerances:

Matthew Sadler

Project Data Sheet

Mather VA - OR 2, 3 & 5

SLD210240

OR2, OR3, OR5

2/24/2023 N/A

N/A 02 0

Dale Passow

210240-02

I. Module Summary

1.2 Powder Coat / Sealant1.1 Industry / Product

Shipped via open bed truck; tarped Palletized with 1st layer of plastic wrap and 2nd layer of heat shrink weather wrap At all seams and penetrations Isopropyl alcohol wipe with non-shed cloth (powder coated parts only)

1.6 Preparation for Shipment

1.5 Jobsite Services

1.4 Ceiling Accessories1.3 Factory Services

By others (forklift required)

1.7 Notes

Modules to be individually tagged in SW corner for easy identification Outside of SLD scope Modules manufactured to dimensional tolerance of +0, -1/8" (-3.175mm) on width and length; diagonal dimensions of ±1/8" (±3.175mm)

Printed on 2/24/2023 at 1:23 PM

Portland, OR 97222 Page 1 of 4

a. Depth: 18.00 inches a. D/D frame style: Bottom-load, HEPA ready

b. Can material: Steel b. Bottom-load seal: Via downward-facing knife edge

c. Can finish: Powder coat per 1.2a c. HEPA locks: Quarter-turns for quick install

d. Grid material: Aluminum

e. Grid finish: Mill

f. Grid style: 20-03-02 LightBar V2-2018

g. HSS sizing: 2"x2"; 0.120" wall*

a. Support style:

b. Support hardware:

c. Support scope:

d. Seismic:

a. Style: Picture frame a. Equip. manuf.: Stryker

b. Depth: 6.00 inches b. Plate supplier: By others

d. Material: Steel c. Plate attachment: Welded into truss at factory

e. HSS sizing: 2"x6"; 0.25" wall*

a. Support style:

b. Support hardware:

c. Support scope:

d. Seismic:

a. Damper size: Standard a. Cleaning: IPA wipe

b. Damper material: Aluminum b. Packaging: Crate, stretch wrap

c. Damper finish: Uncoated c. Shipping: Loose for field install by others

d. Diffuser material: Aluminum perf d. Installation: By others

e. Diffuser finish: Powder coat per 1.2a

2.3 Connection to Structure

Holes in can for vertical suspension 5/8"; by others

2.1 Construction

II. Module Data

Bolting locations provided where required per structural calcs By others 5/8"; by others Holes in HSS for vertical suspension

3.3 Connection to Structure

3.1 Construction 3.2 Mounting Plate Notes

2.2 Damper/Diffuser Frame Notes

By others Bolting locations provided where required per structural calcs

III. OB Mount

IV. Hinged Damper/Diffuser Assembly

4.1 Construction 4.2 Notes

Printed on 2/24/2023 at 1:23 PM 4243 SE International Way, Suite D

Portland, OR 97222 Page 2 of 4

*HSS framing subject to change, pending structural calculations package

a. Manufacturer: Kenall a. Manufacturer: Moon

b. Product: Indigo-Clean b. Power: 120/277V

c. CRI: 90+ c. Dimming: 0-10V current sourcing

d. LED color: 4,300K d. Minimum dim: 1%

e. Output flux: 1,100 lm per foot e. Location: Attached remote enclosure

f. IP rating: 55

ID Number Electrical enclosures Description 1 2,3,4 Interior 2 1,5 Perimeter

a. Compliance:

b. Split connections:

c. Installation scope:

d. Wire terminations:

e. Field connections:

f. Wiring:

a. Manufacturer: SLD Approved Vendor a. Packaging: Single bag, box, stretch wrap

b. Style: Bottom-load with gel seal b. Shipping: Drop ship to site

c. Efficiency: 99.9% at 0.3 microns c. Installation: By others

d. Pack depth: 53 mm d. Factory test: Yes

Electrical work shall be in accordance with the NEC; electrical components will carry UL label; system will be NRTL certified to UL standards 1598 and 8750, and CSA standards C22.2 No. 250.0-08CSA and C22.2 250.13 Electrical work to be wired so that module-to-module wiring connections can be made via quick-connects in the field All necessary LED assemblies, wire covers, and light lenses will be installed in the grid at the factory, prior to shipment

Please note that all filters need to be stored in a conditioned space, and also that no stacking is allowed.

5.2 LED Driver

Lens color

All integrated lighting will be wired to terminal blocks in external electrical enclosures mounted to the side of the system, for field connection by others

5.4 Notes

Clear

5.3 Electrical Circuits

V. Module Lighting

5.1 LED Board

Clear

Field connections will include one (1) 0-10V signal and one (1) power connection per integrated lighting circuit

VI. HEPA Filter (Included)

6.1 Construction 6.2 Notes

277V wire colors: brown with gray neutral and green ground

Printed on 2/24/2023 at 1:23 PM 4243 SE International Way, Suite D

Portland, OR 97222 Page 3 of 4

Due to drop shipment of the filters, a 24-hour notice of arrival cannot be given by SLD.

b. Caulking per 1.2b

i. Suspension access caps and/or split covers (installation hardware included)

g. Damper/diffuser installation hardware

h. 0.50" x 1.75" x 1.75" suspension washers

f. Two (2) eye bolts per room for shipping and installation

e. Sheet metal angle to be installed around perimeter of system (installation hardware included)

d. Buffer hardware for field spares

VII. Miscellaneous Ship Loose

7.1 Notes

a. Installation hardware for module-to-module connection

c. Touchup paint

Printed on 2/24/2023 at 1:23 PM 4243 SE International Way, Suite D

Portland, OR 97222 Page 4 of 4

a. anufacturer: Kenall a. anufacturer: Moon

b. Product: Indigo-Clean b. Power: 120/277V

c. CRI: 90+ c. Dimming: 0-10V current sourcing

d. LED color: 4,300K d. Minimum dim: 1%

e. Output flux: 1,100 lm per foot e. Location: In fixture

Fixture Quantity per room 6" round down light 0 2' x 4' troffer 6 in OR 2 & OR 3; 8 in OR 5

8.4 Other Ship Loose Items

a. One (1) IC100 controller and controller housing

b. One (1) ultrasonic sensor

c. Three (3) passive infrared sensors

8.3 Quantities

8.2 LED Driver8.1 LED Board

VIII. Indigo-Clean Ship Loose Components (Included)

PIR

Passive Infrared

Sensor, typ.

Ultrasonic

Sensor, typ.

Indigo-Clean 2'x 4' troffer, typ.

I C

IC IC

I C

I C

I C

I C

PIR

PIR

I C

I C

US

1500mm ARM

1400m m

ARM

1300mm ARM

1300mm ARM

1600mm ARM

1100mm ARM m m

A

RM

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

OB2

10' WHIP

10' WHIP

RC6 RC7

OB1

RC1

RC2

RC3

RC4

RC5

AF7 AF8 AF9

AF1 AF2 AF3

AF4 AF5 AF6

SP

10' WHIP

OB3

10' WHIP

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

BACKGROUND - HYBRID OR 1

JMS

May 01 2023

3/16" = 1'-0"

B 210240-1 R2

SLD210240 1 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ISOCENTER LOCATION

DEFINED BY PHILIPS

R1 04/03/23

JMS

UPDATED OB3 DESIGN

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

AutoCAD SHX Text

4243 SE INTERNATIONAL WAY, SUITE D

OB2

10' WHIP

10' WHIP

RC6 RC7

OB1

RC1

RC2

RC3

RC4

RC5

AF7 AF8 AF9

AF1 AF2 AF3

AF4 AF5 AF6

SP

10' WHIP

OB3

10' WHIP

N

OB3

MATHER VA

AirFRAME SUBMITTAL LAYOUT

MODULES - HYBRID OR 1

JMS

May 01 2023

3/16" = 1'-0"

B 210240-1 R2

SLD210240 2 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

56.00

[1422.4]

59.07

[1500.3]

30.00

[762.0]

52.00

[1320.8]

20.00

[508.0]

29.00

[736.6]

(2) PLACES

55.07

[1398.8]

28.00

[711.2]

68.93

[1750.8]

26.63

[676.3]

76.00

[1930.4]

76.00

[1930.4]

78.00

[1981.2]

27.00

[685.8]

22.00

[558.8]

10.75

[273.0]

TYP

6.00

[152.4]

TYP

18.00

[457.2]

24.00

[609.6]

65.00

[1651.0]

230.00

[5842.0]

48.00

[1219.2]

32.00

[812.8]

35.38

[898.5]

104.00

[2641.6]

43.87

[1114.4]

(2)

PLACES

12.00

[304.8]

(4) PLACES

50.00

[1270.0]

ISOCENTER LOCATION

DEFINED BY PHILIPS

22.00

[558.8]

14.00

[355.6]

22.00

[558.8]

14.00

[355.6]

50.00

[1270.0]

28.00

[711.2]

57.07

[1449.5]

R1 04/03/23

JMS

UPDATED OB3 DESIGN

6.75

[171.5]

FINISHED CEILING

TO BOTTOM OF OB3

FINISHED CEILING

ELEVATION LINE, TYP.

50.00

[1270.0]

28.00

[711.2]

3.75

[95.3]

SCALE:

3/8" = 1'-0"

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

ESTCODE

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

S

IC IC

2.3

I C

I C

I C

I C

C1

I C

I C

I C

I C

C1

10' WHIP

10' WHIP

10' WHIP

10' WHIP

N

IC IC

2.3

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

2.3

IC IC

2.3

I C

I C

I C

I C

I C

I C

IC IC

2.3

I C

I C

IC IC

2.3

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

I C

I C

IC IC

2.3

I C

I C

IC IC

2.3

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

I C

I C

IC IC

2.3

I C

I C

I C

I C

I C

I C

I C

I C

MATHER VA

AirFRAME SUBMITTAL LAYOUT

GRID - HYBRID OR 1

JMS

May 01 2023

1/4" = 1'-0"

B 210240-1 R2

SLD210240 3 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

PERIMETER ELECTRICAL

CIRCUIT FOOTPRINT-

Enclosures: 1,5,8

INTERIOR ELECTRICAL

CIRCUIT FOOTPRINT-

Enclosures: 2,3,4,5,6,7

30.00

[762.0]

TYP

38.00

[965.2]

TYP

10.00

[254.0]

TYP

Ø3.00

[Ø76.2]

CUTOUT TO BE

MADE IN FIELD.

SLD TO PROVDE

SCREW-TYPE COVER

ELECTRICIAN MUST REVIEW FOOT PEDAL WHITE LIGHT

OVERRIDE INFO AND COORDINATE WITH SLD:

Indigo-Clean Basics article located at:

https://support.sldus.com/portal/en/kb/articles/indigo-clean#

(Includes Foot Pedal / White Light Override info)

22.00

[558.8]

WHITE GRID LENS

WHERE HATCHED

(7 PLACES)

22.00

[558.8]

19.50

[495.3]

19.50

[495.3]

22.25

[565.2]

3.75

[95.2]

22.87

[581.0]

AutoCAD SHX Text NOTES: 1. INTERIOR CIRCUIT DRIVERS/WIRES LABELED WITH "I" INTERIOR CIRCUIT DRIVERS/WIRES LABELED WITH "I" 2. PERIMETER CIRCUIT DRIVERS/WIRES LABELED WITH "P" PERIMETER CIRCUIT DRIVERS/WIRES LABELED WITH "P" 3. EMERGENCY LIGHTS CIRCUIT (WHEN REQ'D) EMERGENCY LIGHTS CIRCUIT (WHEN REQ'D) DRIVERS/WIRES LABELED WITH "E" 4. ALL WATTAGE LEVJMS LISTED ARE BASED ON DRIVER ALL WATTAGE LEVJMS LISTED ARE BASED ON DRIVER MANUFACTURER PUBLISHED MAXIMUM RATINGS 5. FINAL DRIVER COUNTS PER ENCLOSURE SUBJECT TO FINAL DRIVER COUNTS PER ENCLOSURE SUBJECT TO CHANGE DURING ELECTRICAL DESIGN PROCESS

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

RC6 RC7

OB1

RC1

RC2

RC3

RC4

RC5

AF7 AF8 AF9

AF1 AF2 AF3

AF4 AF5 AF6

SP

OB3

N

6.50 [165.10]

Ø0.69 [Ø17.46]

Ø0.56 [Ø14.29]

1.00 [25.40]

1.00 [25.40]

6.50 [165.10]

SEISMIC SUPPORT HOLES

(ONLY WHERE REQ'D

BY STRUCT CALCS)

VERTICAL SUPPORT

HOLE

MATHER VA

AirFRAME SUBMITTAL LAYOUT

SUSPENSION - HYBRID OR 1

JMS

May 01 2023

1/4" = 1'-0"

B 210240-1 R2

SLD210240 4 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

TYP ANCHOR POINT DETAIL

55.00

[1397.0]

58.07

[1474.9]

55.07

[1398.8]

26.00

[660.5]

68.93

[1750.8]

30.00

[762.0]

16.00

[406.4]

2.00

[50.8]

TYP

34.87

[885.7]

28.13

[714.5]

22.00

[558.8]

27.00

[685.8]

RC1,RC5

24.63

[625.5]

74.00

[1879.6]

74.00

[1879.6]

76.00

[1930.4]

33.38

[847.7]

4.50

[114.2]

2.50

[63.5]

10.38

[263.6]

2.50

[63.5]

7.00

[177.8]

2.50

[63.5]

4.50

[114.3]

TYP

41.88

[1063.6]

2.00

[50.8]

TYP

46.00

[1168.4]

22.00

[558.8]

30.00

[762.0]

ISOCENTER LOCATION

DEFINED BY PHILIPS

2.00

[50.8]

TYP

48.00

[1219.2]

38.00

[965.2]

46.00

[1168.4]

46.00

[1168.4]

36.00

[914.4]

38.00

[965.2]

46.00

[1168.4]

57.07

[1449.5]

26.00

[660.4]

48.00

[1219.2]

2.00

[50.8]

TYP

R1 04/03/23

JMS

UPDATED OB3 DESIGN

18.00

[457.2]

16.00

[406.4]

R3 5/1/23 JMS

UPDATED SUSPENSION POINT

LOCATIONS

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

RC6 RC7

OB1

RC1

RC2

RC3

RC4

RC5

AF7 AF8 AF9

AF1 AF2 AF3

AF4 AF5 AF6

SP

OB3

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

UNISTRUT - HYBRID OR 1

JMS

May 01 2023

1/4" = 1'-0"

B 210240-1 R2

SLD210240 5 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

SLD UNISTRUT IN AF & RC

MODULES MOUNTED 3/8" BELOW

FINISHED CEILING MEASURED

FROM BOTTOM OF UNISTRUT TO

BOTTOM OF FINISHED CEILING,

UNLESS SPECIFIED OTHERWISE

ISOCENTER LOCATION

DEFINED BY PHILIPS

4.69

[119.1]

26.00

[660.4]

26.00

[660.3]

25.39

[644.8]

26.62

[676.1]

6.50

[165.1]

26.00

[660.4]

26.00

[660.4]

26.00

[660.4]

26.00

[660.4]

26.00

[660.4]

26.00

[660.4]

26.00

[660.4]

8.50

[215.9]

24.00

[609.6]

8.00

[203.2]

24.00

[609.6]

8.00

[203.2]

73.00

[1854.2]

25.00

[635.0]

23.39

[594.0]

8.00

[203.2]

20.62

[523.7]

52.00

[1320.9]

52.00

[1320.9]

6.00

[152.4]

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

SP

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

EQUIPMENT - HYBRID OR 1

JMS

May 01 2023

1/4" = 1'-0"

B 210240-1 R2

SLD210240 6 6

210240-1 Mather VA - Hybrid OR_Submittal Layout_R3.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ISOCENTER LOCATION

DEFINED BY PHILIPS

10.00

[254.1]

92.00

[2336.8]

109.00

[2768.6]

Ø3.00

[Ø76.2]

CUTOUT TO BE

MADE IN FIELD.

SLD TO PROVDE

SCREW-TYPE COVER

STRYKER SUPPLIED

TANDEM COMMON MOUNTING PLATE

BOTTOM OF PLATE TO BE MOUNTED

3" FROM BOTTOM OF FINISHED CEILING

STRYKER SUPPLIED MOUNTING PLATE

BOTTOM OF PLATE TO BE MOUNTED

3" FROM BOTTOM OF FINISHED CEILING

(2 PLACES)

ANGLE BRACKETS FOR MOUNTING

PATIENT LIFT SYSTEM.

FINAL LOCATION TO BE DETERMINED

BY SLD DETAIL DESIGN

25.38

[644.7]

26.62

[676.1]

92.00

[2336.8]

164.00

[4165.6]

R1 04/03/23

JMS

UPDATED OB3 DESIGN

R2 4/27/23 JMS

UPDATED PATIENT LIFT BRACKET

LOCATIONS

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

OR #2

(GENERAL)

AFF

10' - 0"

GYP BD 02

SHAFT

PIR

US

Passive Infrared

Sensor, typ.

Ultrasonic

Sensor, typ.

IC

Indigo-Clean 2'x 4' troffer, typ.

I C

I C

I C

I C

IC

PIR

PIR

S

SS

S S

IC IC

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

S S

SS

S

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

AF1

AF2

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

S S

OB4 OB2

OB3

OB1

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

BACKGROUND - OR 2

JMS

Feb 24 2023

1/4" = 1'-0"

B 210240-2 R0

SLD210240 1 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ALL CEILING ACCESS PANELS (3 PLACES)

ARE OUTSIDE SLD's SCOPE

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

OR #3

(GENERAL)

AFF

10' - 0"

GYP BD 02

PIR

IC

I C

I C

I C

I C

IC

PIR

PIR

S

SS

S S

IC IC

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

S S

SS

S

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

AF1

AF2

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

S S

OB4 OB2

OB3

OB1

MATHER VA

AirFRAME SUBMITTAL LAYOUT

BACKGROUND - OR 3

JMS

Feb 24 2023

1/4" = 1'-0"

B 210240-2 R0

SLD210240 1 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ALL CEILING ACCESS PANELS (3 PLACES)

ARE OUTSIDE SLD's SCOPE

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

ORTHO OR #5

AFF

10' - 0"

GYP BD 02

GYP BD-1

AFF

8' - 0"

RETURN

S S S

S S

ICIC

ICIC

ICIC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

S S

S S S

ICIC

ICIC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

AF1

AF2

ICIC

ICIC

ICIC

ICIC

ICIC

ICIC

ICIC

ICIC

ICIC

ICIC

S S

OB4OB2

OB3

OB1

Indigo-Clean 2'x 4' troffer, typ.

ICIC

ICIC

ICIC

ICIC

PIR

US

Passive Infrared

Sensor, typ.

Ultrasonic

Sensor, typ.

PIR

PIR

MATHER VA

AirFRAME SUBMITTAL LAYOUT

BACKGROUND - OR 5

JMS

Feb 24 2023

1/4" = 1'-0"

B 210240-2 R0

SLD210240 1 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ALL CEILING ACCESS PANELS (3 PLACES)

ARE OUTSIDE SLD's SCOPE

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

AF1

AF2

OB4 OB2

OB3

OB1

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

MODULES - OR 2 & 3

JMS

Feb 24 2023

3/8" = 1'-0"

B 210240-2 R0

SLD210240 2 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

46.00

[1168.4]

77.00

[1955.8]

64.00

[1625.6]

28.00

[711.2]

76.00

[1930.4]

32.00

[812.8]

28.00

[711.2]

32.00

[812.8]

57.00

[1447.8]

(2) PLACES

28.00

[711.2]

(2) PLACES

69.00

[1752.6]

(2) PLACES

28.00

[711.2]

28.00

[711.2]

31.00

[787.4]

(2) PLACES

78.00

[1981.2]

92.00

[2336.8]

36.00

[914.4]

TYP

10.00

[254.0]

TYP

154.00

[3911.6]

154.00

[3911.6]

210.00

[5334.0]

FINISHED CEILING

ELEVATION LINE, TYP.

18.00

[457.2]

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

S

SS

S S

IC IC

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

S S

SS

S

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

S S

N

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

I C

I C

I C

I C

I C

I C

I C

I C

IC IC

IC IC

IC IC

IC IC

IC IC

IC IC

MATHER VA

AirFRAME SUBMITTAL LAYOUT

GRID - OR 2 & 3

JMS

Feb 24 2023

1/2" = 1'-0"

B 210240-2 R0

SLD210240 3 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

38.00

[965.2]

TYP

30.00

[762.0]

TYP

PERIMETER ELECTRICAL

CIRCUIT FOOTPRINT

EE #: 1,5

INTERIOR ELECTRICAL

CIRCUIT FOOTPRINT

EE #: 2,3,4

4 5

AutoCAD SHX Text NOTES: 1. INTERIOR CIRCUIT DRIVERS/WIRES LABELED WITH "I" INTERIOR CIRCUIT DRIVERS/WIRES LABELED WITH "I" 2. PERIMETER CIRCUIT DRIVERS/WIRES LABELED WITH "P" PERIMETER CIRCUIT DRIVERS/WIRES LABELED WITH "P" 3. EMERGENCY LIGHTS CIRCUIT (WHEN REQ'D) EMERGENCY LIGHTS CIRCUIT (WHEN REQ'D) DRIVERS/WIRES LABELED WITH "E" 4. ALL WATTAGE LEVJMS LISTED ARE BASED ON DRIVER ALL WATTAGE LEVJMS LISTED ARE BASED ON DRIVER MANUFACTURER PUBLISHED MAXIMUM RATINGS 5. FINAL DRIVER COUNTS PER ENCLOSURE SUBJECT TO FINAL DRIVER COUNTS PER ENCLOSURE SUBJECT TO CHANGE DURING ELECTRICAL DESIGN PROCESS

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

OB4 OB2

OB3

OB1

N

6.50 [165.10]

Ø0.69 [Ø17.46]

Ø0.56 [Ø14.29]

1.00 [25.40]

1.00 [25.40]

6.50 [165.10]

SEISMIC SUPPORT HOLES

(ONLY WHERE REQ'D

BY STRUCT CALCS)

VERTICAL SUPPORT

HOLE

MATHER VA

AirFRAME SUBMITTAL LAYOUT

SUSPENSION - OR 2 & 3

JMS

Feb 24 2023

3/8" = 1'-0"

B 210240-2 R0

SLD210240 4 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

TYP ANCHOR POINT DETAIL

45.00

[1143.0]

76.00

[1930.4]

64.00

[1625.6]

26.00

[660.4]

(2) PLACES

26.00

[660.4]

(2) PLACES

69.00

[1752.6]

2.00

[50.8]

TYP

26.00

[660.4]

(2) PLACES

29.00

[736.6]

(2) PLACES

57.00

[1447.8]

(2) PLACES

32.00

[812.8]

26.00

[660.4]

32.00

[812.8]

90.00

[2286.0]

74.00

[1879.6]

76.00

[1930.4]

2.00

[50.8]

TYP

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

OB4 OB2

OB3

OB1

N

MATHER VA

AirFRAME SUBMITTAL LAYOUT

EQUIPMENT - OR 2 & 3

JMS

Feb 24 2023

3/8" = 1'-0"

B 210240-2 R0

SLD210240 5 5

210240-2 Mather VA - OR 2, 3 & 5_Submittal Layout_R0.dwg

= SUPPLY AIR

= ACCESS PANEL

= SHARED AIR

= LED FIXTURE

= ELECTRICAL BOX

LED LED

= UNISTRUT

ANGLE BRACKETS FOR MOUNTING

PATIENT LIFT SYSTEM. FINAL LOCATION

TO BE DETERMINED BY SLD DETAIL

DESIGN

77.00

[1955.8]

46.00

[1168.4]

6.00

[152.4]

6.00

[152.4]

91.00

[2311.4]

91.00

[2311.4]

32.00

[812.8]

STRYKER SUPPLIED

SINGLE COMMON MOUNTING PLATE

BOTTOM OF PLATE TO BE MOUNTED

3" FROM BOTTOM OF FINISHED CEILING

TYP. (4) PLACES

63.00

[1600.2]

63.00

[1600.2]

AutoCAD SHX Text

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

AutoCAD SHX Text

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE DISTRIBUTED, REPRODUCED, OR

AutoCAD SHX Text

USED IN ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

REV.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

BY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

0.0000 :

AutoCAD SHX Text

GIVEN

AutoCAD SHX Text

ANGLES :

AutoCAD SHX Text %%P0.5%%D

AutoCAD SHX Text

TOLERANCES

AutoCAD SHX Text

UNLESS OTHERWISE

AutoCAD SHX Text

0.000 :

AutoCAD SHX Text

0.00 :

AutoCAD SHX Text

0.0 :

AutoCAD SHX Text

FRACTIONS :

AutoCAD SHX Text %%P0.1

AutoCAD SHX Text %%P0.03

AutoCAD SHX Text %%P0.010

AutoCAD SHX Text %%P1/32

AutoCAD SHX Text

SPECIFIED

AutoCAD SHX Text

ISSUED ON:

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB #:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

DRAWING NO.:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SIZE:

AutoCAD SHX Text Email Sales@SLDtechnology.com

AutoCAD SHX Text Phone (503) 744-0002

AutoCAD SHX Text

PORTLAND, OR 97222

A A

B B

C C

D D

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE REPRODUCED OR USED IN

ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

SCALE:

0.0000 : GIVEN

ANGLES : 0.5

TOLERANCES

UNLESS OTHERWISE

0.000 :

0.00 :

0.0 :

FRACTIONS :

0.1 0.03 0.010

1/32

SPECIFIED

ISSUED ON:

CHECKED BY:

DRAWN BY:

JOB #: SHEET OF

DRAWING NO.:SIZE:

4243 SE INTERNATIONAL WAY, Suite D

PORTLAND, OR 97222

Phone: (503) 744-0002 Email: Sales@SLDtechnology.com

000000-0

PERIMETER ANGLE ATTACHMENT

Joe Boss

8/30/2018

SLD00000-01 / 3

B

1 1CRITICAL: REV: A

SHIP LOOSE

CORNER CAP

SHIP LOOSE

PERIMETER ANGLE

TEK SCREW (TYP)

TEK SCREW (TYP)

TEK SCREW (TYP)

SHIP LOOSE

PERIMETER ANGLE

DETAIL A

SCALE 1 / 4

VIEW B-B

SCALE 1 / 4

DETAIL C

SCALE 1 / 4

A

B B

C

A A

B B

C C

D D

DRAWING, SPECIFICATIONS, AND CONCEPTS CONTAINED HEREIN ARE THE SOLE

PROPERTY OF SLD TECHNOLOGY, AND MAY NOT BE REPRODUCED OR USED IN

ANY WAY WITHOUT THE PRIOR WRITTEN PERMISSION OF SLD TECHNOLOGY, LLC.

SCALE:

0.0000 : GIVEN

ANGLES : 0.5

TOLERANCES

UNLESS OTHERWISE

0.000 :

0.00 :

0.0 :

FRACTIONS :

0.1

0.03

0.010

1/32

SPECIFIED

ISSUED ON:

CHECKED BY:

DRAWN BY:

JOB #: SHEET OF

DRAWING NO.:SIZE:

4243 SE INTERNATIONAL WAY, Suite D

PORTLAND, OR 97222

Phone: (503) 744-0002

Email: Sales@SLDtechnology.com

SuspDetail

SUSPENSION POINTS

TYPICAL DETAIL

MYung

2/19/2018

123456-123

1 / 4

A

1 1

CRITICAL:

REV:

A

REVISION HISTORY

ZONE REV DESCRIPTION DATE APPV

A INITIAL RELEASE

1/22/2018

MMY

8" NUT

16MM NUT

1.75 X 1.75 X

2"

44.45MM X 44.45MM X 12.7MM

STEEL PLATE WASHER

8" WASHER

16MM WASHER

8" NUT

16MM WASHER

8" THREADED ROD

16MM THREADED ROD

1.000

[25.4]

6.500

[165.1]

1.000

[25.4]

6.500

[165.1]

SUSPENSION LOCATION

SEISMIC LOCATION

SEISMIC LOCATION

Michael Text Box

SEISMIC LOCATIONS ONLY PROVIDED WHERE REQUIRED PER STRUCTURAL CALCULATIONS

Powder Coat & Sealant

Regulatory Data Sheet

DOWSIL™ 732 Multi-Purpose Sealant, White

Identification Number: 6024652 Supersedes all versions prior to Effective Date Page 1 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

(DD.MM.YYYY):

23.02.2021

Information provided in this Regulatory Data Sheet (RDS) does not indicate Dow product availability in all countries aligned with the below regulations. Please contact Dow to confirm availability of product in specific countries.

Global Chemical Inventory Compliance

Country Inventory Status

Australia AICS All ingredients in this preparation are listed in the Australian Inventory of Chemical Substances, AICS, or are exempt.

Canada DSL All substances contained in this product are listed on the Canadian Domestic Substances List (DSL) or are not required to be listed.

China IECSC All intentional components are listed on the inventory, are exempt, or are supplier certified.

Japan ENCS All intentional components are listed on the inventory, are exempt, or are supplier certified.

Korea KECI All intentional components are listed on the inventory, are exempt, or are supplier certified.

New Zealand NZIoC The hazardous components of this product are listed in the New Zealand Inventory of Chemicals (NZIoC) or the product otherwise complies with the requirements of the Hazardous Substances and New Organisms (HSNO) Act 1996.

Philippines PICCS All intentional components are listed on the inventory, are exempt, or are supplier certified.

Switzerland EINECS The components of this product are on the EINECS inventory or are exempt from inventory requirements.

Taiwan TCSI All intentional components are either listed on the Inventory or exempted by regulations, or certified by venders of their supply chemicals.

United States of America (USA) TSCA All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory.

Country/Area Additional Chemical Control Law Information

Country/Area Regulatory Reference

Details

EEA Countries, Switzerland REACh Please search https://www.dow.com/en-

Page 2 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

(DD.MM.YYYY):

23.02.2021

Regulation (EC) No 1907/2006 Annex XVII us/support/sds-finder.htm for the country Safety Data Sheet (SDS). If a SDS is not available, you may contact Customer Information Group at https://www.dow.com/en-us/contact-us.html to confirm product availability in this country and request a SDS.

Turkey KKDIK Annex 17

Please search https://www.dow.com/en-us/support/sds-finder.htm for the country Safety Data Sheet (SDS). If a SDS is not available, you may contact Customer Information Group at https://www.dow.com/en-us/contact-us.html to confirm product availability in this country and request a SDS.

REACH

REACH requires the registration of substances when they are manufactured or imported into the European Economic Area (EEA) at a volume of one metric ton or more per annum per legal entity. We hereby confirm that every REACH relevant substance in the composition of the above Dow product(s), made available on the EEA Market by Dow, has been accordingly covered under REACH, either via own registration or supplier coverage for the relevant tonnage band, and is therefore compliant with the REACH regulation (EC) N° 1907/2006 as per the official ECHA list published on the ECHA website https://echa.europa.eu/information-on-chemicals/registered-substances. The above statement is only valid for volumes imported into or manufactured within the EEA by Dow and placed on the market within the EEA. For customers based outside the EEA importing Dow products or products containing Dow products into the EEA, please note that these imports are not covered under the EEA Dow Legal Entity(ies) registrations. It is the obligation of the importer to ensure REACH compliance unless an agreement is in place that allows the importing non-EEA company’s volumes to be covered under the Dow Only Representative Trustee model, which covers volumes of indirectly imported Dow products under the existing Dow registrations. The possibility of providing a Dow Only Representative Trustee coverage needs to be evaluated for each REACH relevant substance. For information on our products and REACH, visit the Dow REACH page https://reach.dow.com/en-us.

Dietary Laws

Halal

This product is not Halal certified.

Kosher

This product is not Kosher certified.

Child Safety Regulations

Toy Safety - ASTM F963 / EN 71-3

This product is not promoted for use in children's toys.

Page 3 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

Hazard Information Reporting (RTK)

California Prop. 65

This product contains a chemical that is at or below California Propositions 65’s "safe harbor level" as determined via a risk assessment. Therefore, the chemical is not required to be listed as a Prop 65 chemical on the SDS or label.

Metal Regulations

Conflict Minerals (Dodd-Frank Wall Street Reform and Consumer Protection Act)

See the completed Conflict Minerals Reporting Template (CMRT) version 5.12 on the EHS Portal:

https://consumer.dow.com/en-us/technical-support/ehs-portal/food-and-water.html.

Coalition of Northeastern Governors (CONEG)

The following substances – cadmium, chromium VI, lead, or mercury, are not intentionally added to this product. Heavy metals are not expected to be present unless at trace levels as unknown impurities from the raw materials. This information is based upon our theoretical composition, data from our raw material manufacturers, and knowledge of our manufacturing process. Please note that we do not test our finished product for the presence of heavy metals. Coalition of Northeastern Governors (CONEG) legislation applies to the finished article.

EU 94/62/EC - Packaging and Packaging Waste

Dow does not routinely analyze for additional materials that are not listed in the MSDS or Sales Specification. Specifically, while we have not analyzed for heavy metals referenced in EU Directive 94/62/EC (Cadmium, Hexavalent Chromium, Lead, Mercury), they are not known to be present in this product.

Origin

Animal Derived Components (BSE/TSE)

To the best of our knowledge, this product is not manufactured or formulated with ingredients of animal origin.

Genetically Modified Organisms (GMO)

To the best of our knowledge, there are no raw materials, including additives, that have been derived from genetically modified organisms (GMO).

Origin

The Product is made from solely synthetic sources.

Page 4 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

Preservative

Preservatives

No preservative is intentionally added to this product.

Volatile Organic Compound

Volatile Organic Compounds (VOC)

For VOC information, please consult your local EHS contact.

General/Global Regulations

Food Allergens

To the best of our knowledge, there are no substances present in the Product that are listed in Annex IIIa of Directive 2007/68/EC of the European Parliament and of the Council: cereals containing gluten ( i.e.

wheat, rye, barley, oats, spelt, kamut or their hybridised strains), crustraceans, eggs, fish, peanuts, soybeans, milk (including lactose), nuts (i.e. Almond (Amygdalus communis L.), Hazelnut (Corylus avellana), Walnut (Juglans regia), Cashew (Anacardium occidentale), Pecan nut (Carya illinoiesis (Wangenh.) K. Koch), Brazil nut (Bertholletia excelsa), Pistachio nut (Pistacia vera), Macadamia nut and Queensland nut (Macadamia ternifolia)), celery, mustard, sesame seeds, sulphur dioxide, sulphites, lupin or molluscs and products thereof. We are unaware of any potential sources for the introduction of any substances of concern from the manufacturing and packaging processes, nor from the packaging components themselves. We do not specifically analyze for the presence of these substances. Therefore, we cannot guarantee the level of these substances to any specific limit or threshold value.

HSNO Approval Surface Coatings and Colourants Subsidiary Hazard Group Standard 2017

HSNO Approval Number: HSR002670

HSNO Controls Certified handler certificate not required.

Tracking hazardous substance not required.

Refer to the Health and Safety at Work (Hazardous Substances) Regulations 2017, for further information.

EU Directive 2015/863 (RoHS 3)

DIRECTIVE (EU) 2015/863 of March 31, 2015 amending Annex II to DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of June 8, 2011 on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive).The substances restricted in accordance with Directive (EU) 2015/863 are not expected to be present in the Product(s) indicated above at or above the specified concentrations of 0.1% (by weight) for lead, mercury, hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE), Page 5 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

(including decaBDE, PentaBDE or OctaBDE), Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP), Diisobutyl phthalate (DIBP) and 0.01% (by weight) for cadmium.

TSCA 12b

We have reviewed the composition of the Product for the presence of TSCA 12b listed substances.

Based on that review, the Product does not contain chemical components subject to TSCA section 12(b) export notification.

Substances and Compounds

The following substances are not expected to be present in this Product. We may not specifically analyze for the presence of these substances in the Product. Therefore, we cannot guarantee the absence or level of these substances to any specific limit or threshold value:

Alkylphenols and Alkylphenol Ethoxylates Antimony (Sb) or antimony compounds Aromatic Amines Arsenic (As) or arsenic compounds Azo compounds Beryllium (Be) or beryllium compounds Bisphenol A Boron (B) or boron compounds Cadmium (Cd) or cadmium compounds Ceramic fibers Cerium/Cerium Compounds Chlorofluorocarbons Chromium (Cr) or chromium compounds Dimethyl Fumarate Fluorotelomer Formaldehyde Glycol Ethers classified as Reprotox 1A or 1B Gold or Gold compounds Halogenated Flame Retardants Hydrochlorofluorocarbons (HCFC) Hydrofluorocarbons (HCF) Natural Rubber Latex (NRL) Lead/Lead Compounds Lithium (Li) or lithium compounds Manganese (Mn) or manganese compounds Mercury (Hg) or mercury compounds Nickel (Ni) or nickel compounds Ozone Depleting Substances Perfluorooctane sulfonate (PFOS) Perfluorooctanoic acid (PFOA) Phenol Phthalates - as listed on the EPA Phthalates Action Plan Polyaromatic Hydrocarbons Polybrominated Biphenyls (PBB)

Page 6 of 7 ® ™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Effective Date

Polybrominated Diphenyl ether (PBDE) Polychlorinated Biphenyls (PCB) Polyvinyl Chloride (PVC) Radioactive substances Selenium (Se) or selenium compounds Silver (Ag) or silver compounds Strontium/Strontium Compounds Tantulum/Tantalum Compounds Tellurium (Te) or tellurium compounds Thallium (Tl) or thallium compounds Tungsten (W) or tungsten compounds Vanadium/Vanadium Compounds

Product Specification

For product specifications, please request a Sales Spec document for this product from The Dow Customer Information Group at http://www.dow.com/en-us/contact-us-cig.

Composition Statement

For information on the components of our product and their concentration, please refer to the Safety Data Sheet (SDS) and the Sales Specification. Any hazardous constituents above regulatory disclosure cut-off limits determined according to their regional and/or specific GHS classification(s) will appear in the ingredients section of the SDS. In addition, consult the Hazardous Decomposition Products section for further information. You can search https://www.dow.com/en-us/support/sds-finder.html for an available

SDS.

Responsible Care

Dow complies with the American Chemistry Council's Responsible Care® guiding principles, codes, and management system requirements. Dow has recommitted its support for Responsible Care on a global scale by signing the Responsible Care Global Charter under the auspices of the International Council of Chemical Associations (ICCA). Dow has also endorsed the ICCA's Global Product Strategy, an effort by the global chemical industry to further improve its product stewardship efforts. Our EH&S management system is audited regularly to ensure compliance with all applicable governmental requirements, Responsible Care, and internal Dow requirements.

Dow has adopted what we call our "2025 Sustainability Goals" -- ambitious performance improvement goals with a broad external focus: strengthening our relationships with…