LTSCI ProjMan VOL 01 part 2of2 div09-div14 tt.pdf

BID PACKAGE B - CONSTRUCTION LTSCI PROJECTS

DATE: 06 MAY 21 VANTHCS, DALLAS, TX

PROJECT 549-820B

09 06 00- 1

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART 1 - GENERAL

1.1 SUMMARY

A. This Section includes a schedule summary of Design Selections for materials technically specified in various technical Sections of this Project Manual.

1.2 PROCEDURES

A. References in this Section to specific manufacturer, model name and model number, are to establish preferred design selection standard only and the basis for the design documents. Other "Acceptable Manufacturers" listed in each respective technical section, if qualified, are allowed to submit in accordance with Division 1 Section "Product Requirements".

B. Each material selection is referenced by Section name and number to where it is specified.

1.3 GENERAL SELECTIONS

A. 03 35 11 – Concrete Floor Finishing

1. SCON-1:

a. Manufacturer:

b. Style / Color Selections: sealed concrete

c. Finish: Standard

2. SCON-2:

a.Manufacturer: L&M Construction Chemicals b.Style / Color Selections: Sealhard (topical sealant) c.Finish:

B. 03 45 00 – Precast Architectural Concrete

1. Precast Panel Type A:

a. Manufacturer: Gate Precast

b. Description: 8" precast panel

c. Product: Sample #H761 (light color, no pigment, river rock aggregate)

d. Finish: Heavy Acid Etch

2. Precast Panel Type B:

a. Manufacturer: Gate Precast

b. Description: 8" precast panel with custom formliner pattern

c. Product: Sample #H762 (dark color, pigment added, river rock aggregate)

d. Formliner: Reckli GmbH, Rib and Wave Pattern Series, 1/176 Raba or similar

e. Finish: Heavy Acid Etch

3. Precast Panel Type C:

a. Manufacturer: Gate Precast

b. Description: 8" precast panel with custom formliner pattern

c. Product: Gate Precast Sample #H761 (light color, no pigment, river rock aggregate)

d. Formliner: Reckli GmbH, Abstract Pattern Series, 2/174 Breisgau

e. Finish: Heavy Acid Etch

f. Note: Refer to Architectural Elevations for formliner location

C. 04 05 16 - Masonry Grouting

1. Grout to match Limestone Veneer A and B

09 06 00- 2

D. 04 42 00 – Exterior Cladding

1. Limestone Veneer Type A:

Note: Color, texture, and finish to complement existing campus limestone

a. Manufacturer: Texastone

b. Product: Hadrian

c. Color: Light beige limestone with inclusions and shells

d. Texture: Smooth Finish

e. Pattern: Stacked Bond

f. Size: 24" X 48" X 2" thick

2. Limestone Veneer Type B:

Note: Color, texture, and finish to complement existing campus limestone

a. Manufacturer: Texastone

b. Product: Hadrian

c. Color: Light beige limestone with inclusions and shells

d. Texture: Split Face Finish

e. Pattern: Stacked Bond

f. Size: 6”x24”x1 ¾” thick

E. 04 43 00 – Stone Masonry

1. ST-1:

a. Manufacturer: Norstone Stacked Stone

b. Style/Color Selections: Blended Ochre

c. Size: 6”x24”x1 ¾” thick.

d. Finish: Standard

2. ST-2 (Lobby Wall Field):

a. Manufacturer: Texastone

b. Product: Hadrian

c. Color: Light beige limestone with inclusions and shells

d. Texture: Smooth Finish

e. Pattern: Stacked Bond

f. Size: 24” X 48” X 2” thick

g. Note: Color, texture, and finish to complement existing campus limestone

3. ST-3 (Lobby Wall Accent):

a. Manufacturer: Texastone

b. Product: Hadrian

c. Color: Light beige limestone with inclusions and shells

d. Texture: Split Face Finish

e. Pattern: Stacked Bond

f. Size: 6” X 48” X 2” thick

g. Note: Color, texture, and finish to complement existing campus limestone

4. ST-4 (Lobby Base):

a. Manufacturer: Texastone

b. Product: Hadrian

c. Color: Light beige limestone with inclusions and shells

d. Texture: Smooth Finish Polish and Sealed

e. Pattern: Stacked Bond

f. Size: 24” X 48” X 2” thick

g. Note: Color, texture, and finish to complement existing campus limestone

F. 05 50 00 – Metal Fabrications

1. Steel Trellis Structure:

a. Standard structural steel shapes, refer drawings

b. Connections: All field connections to be bolted. No field welds allowed.

c. Surface preparation SSPC-SP6, Commercial Blast.

09 06 00- 3

d. Fabricated in accordance with AESS requirements.

e. Special re-coatable epoxy primer

f. Finish: Two (2) coat urethane topcoat,

g. Color: Match Metal Wall Panel PDVF Kynar 500, 9947 Grey Velvet

2. HRS-1:

a. Manufacturer: Dallas Metal Fabricators, Inc.

b. Style/Color Selections: Hot Rolled Steel

c. Size:

d. Finish:

e. Contact: Bill Ross Jr. 214.421.7417

3. Metal Framed Insect Screens

a. Manufacturer: Mason Corporation

b. Framing: 2” x 2” ‘H122’ Main Frame typical

c. Perimeter Channel: H124/H123

d. Fasteners: Pan head; Conceal where possible

e. Framing Color: Match Metal Wall Panel PDVF Kynar 500, 9960 XL Medium Grey

f. Fabric: Phifer Tuff Screen

g. Fabric Color: Black

G. 05 52 20 – Glass Railing

1. GR-1:

a. Manufacturer: Livers Bronze Co.

b. Style/Color Selections: Button Rail, Handrailing System, Starfire or low-e clear glass with 1-1/2” Stainless Steel Assist Rail, Satin Finish

c. Size: ½” Tempered Plate Glass Panels (ref. elevations for panel sizes)

d. Finish: Smooth with polished edges

H. 05 72 00 - Ornamental Handrails and Railings

1. Ornamental Handrail

a. Manufacturer: McNichols

b. Description: Perforated Metal Panel

c. Product: 1/2" Round on 11/16" staggered centers, Carbon Steel, Powder coated

d. Gauge: 16

e. Color: Match Metal Wall Panel PDVF Kynar 500, 9960 XL Medium Grey

I. 06 20 00– Finish Carpentry

1. WD-1:

a. Manufacturer: Bacon Veneer

b. Species: Red Gum

c. Cut: Figured, Book Matched

d. Finish: Natural

2. WD-2:

a. Manufacturer: Reclaimed Wood – Terra Mai

b. Species: Teak

c. Cut: 5 ½” Reclaimed Teak Flooring

d. Finish: Clear natural oil. Fire retardant added to achieve Class A fire rating.

3. WD-3:

a. Manufacturer: N/A

b. Species: Teak

c. Cut: ¾” x 2 ¾” slats

d. Finish: Natural with AFM Naturals Oil-Wax.

e. General Notes: Slat bench in Men’s and Women’s shower/changing rooms. Reference interior elevations.

f. Cut: Quartered

g. Finish: Natural (Clear)

h. Location: All Interior Doors

09 06 00- 4

J. 06 41 00 – Plastic Laminates

1. HPDL-1:

a. Manufacturer: Formica

b. Style / Color Selections: Natural Teak #8849-58

c. Finish: Matte

2. HPDL-2:

a. Manufacturer: Formica

b. Style / Color Selections: Pecan Woodline #5883-58

c. Finish: Matte

3. HPDL-3:

a. Manufacturer: Formica

b. Style / Color Selections: Neutral Weft #5875-58

c. Finish: Matte

4. HPDL-4:

a. Manufacturer: Formica

b. Style / Color Selections: Espresso Pear # 5489-NT

c. Finish: Naturelle Finish

5. HPDL-5:

a. Manufacturer: Lamin-Art

b. Style / Color Selections: #2418-T, Graphite

c. Finish: Naturelle Finish (with Oyster shield for horizontal use)

6. HPDL-8:

a. Manufacturer: Formica

b. Style: 7223C-58

c. Color: New White

d. Finish: Matte

7. HPDL-10:

a. Manufacturer: Lamin-Art

b. Style / Color Selections: #2102-G, Royal Pewter

c. Finish: Gloss Finish

K. 06 60 00 – Plastic Fabrications

1. TF-1:

a. Manufacturer: 3Form

b. Style / Color Selections: Varia Ecoresin, Connection Pure

c. Size: 4’ X 8’ X ¼” thick

d. Finish: Front-Sandstone, Back-Sandstone

2. TF-2:

a. Manufacturer: 3Form

b. Style / Color Selections: Chroma, Cayman

c. Size: 4’ X 8’ X 2” thick

d. Finish: FF-Renew, BF-Sea Infused, with white matte backing

3. TF-3:

a. Manufacturer: 3Form

b. Style / Color Selections: Chroma, Atlantic

c. Size: 4’ X 8’ X 2” thick

d. Finish: FF-Renew, BF-Atlantic Infused, with white matte backing

4. TF-4:

a. Manufacturer: 3Form

b. Style / Color Selections: Chroma, Blush

c. Size: 4’ X 8’ X 2” thick

d. Finish: FF-Renew, BF- Rose Infused, with white matte backing

5. TF-5:

a. Manufacturer: 3Form

b. Style / Color Selections: Chroma, Aloe

c. Size: 4’ X 8’ X 2” thick

d. Finish: FF-Renew, BF- Valley Mist Infused, with white matte backing

09 06 00- 5

6. TF-6:

e. Manufacturer: 3Form

f. Style / Color Selections: Varia, Color Parchment

g. Size: 4’ X 8’ X 1/4” thick

h. Finish: Vapor (52%) transparency, with Lumiguard

7. TF-7:

a. Manufacturer: Lightblocks

b. Style / Color Selections: Dry Ice ThruColor Material

c. Size: 3/8” thick.Panels to be cut to size and fabricated by manufacturer.

d. Finish: Matte with resin coat

L. 07 14 13- Roof Pavers

1. Roof Pavers Type A:

a. Manufacturer: Landmark Ceramics

b. Description: Pedestal paver on adjustable height Pedestal System

c. Product: Frontier 20

d. Size: 24” x 24” x .787”

e. Finish: Stone Look

f. Field Color 01: Sky

2. Pavers Type B:

a. Manufacturer: Landmark Ceramics

b. Description: Pedestal paver on adjustable height Pedestal System

c. Product: Frontier 20

d. Size: 24” x 24” x .787”

e. Finish: Stone Look

f. Accent Color 01: Cosmos

M. 07 21 29 – Sprayed Thermal Insulation

1. BI-1:

a. Manufacturer: Monoglass, Spray-On Insulation

b. Style / Color Selections: Standard White

c. Finish: To be selected by Architect from manufacturer’s full range.

N. 07 42 15 – Blast Requirements for Metal Wall Panels

1. Metal Wall Panel Type A:

a. Manufacturer: Centria Architectural Systems

b. Product: Concept Series, Concealed Fastener Panel CS-200

c. Description: Metal panel, GA-22 G-90 galvanized steel

d. Size: 7/8" depth x 12” height, maximum 30'-0" in length, horizontal application

e. Finish: Exterior surface finish to be smooth

f. Color: PDVF Kynar 500, Aluminum metallic 3-coat color series, 9960 XL Medium Grey

2. Metal Wall Panel Type B:

a. Manufacturer: Centria Architectural Systems

b. Product: Concept Series, Concealed Fastener Panel CS-210

c. Description: Metal panel, GA-22 G-90 galvanized steel

d. Size: 7/8" depth x 12” height, maximum 30'-0" in length, horizontal application

e. Finish: Exterior surface finish to be smooth

f. Color: PDVF Kynar 500, Aluminum metallic 3-coat color series, 9960 XL Medium Grey

3. Metal Wall Panel Type C:

a. Manufacturer: Centria Architectural Systems

b. Product: Concept Series, Concealed Fastener Panel CS-200

c. Description: Metal panel, GA-22 G-90 galvanized steel

d. Size: 7/8" depth x 12” height, maximum 30'-0" in length, horizontal application

e. Finish: Exterior surface finish to be smooth

09 06 00- 6

f. Color: PDVF Kynar 500, Aluminum metallic 3-coat color series, 9958 XL Champagne Gold

O. 07 42 35 - Phenolic Wall Panel

1. Phenolic Wall Panel Type A:

a. Manufacturer: Trespa

b. Product: Meteon Exterior Panel

c. Fasteners: Concealed

d. Finish: Oxidation, Matte or approved equal

e. Note: Avoid repeat patterning on adjacent panel

P. 07 42 43 – Composite Wall Panels

1. CMP-1: (Column Covers)

a. Manufacturer: Alucobond

b. Style / Color Selections: Alucobond Plus; Dry Seal Rout and Return Curved Column Covers

c. Size: Ref. Interior Elevations for panel sizes and alignments

d. Color: PVDF Kynar 500, Champagne Metallic Gloss 30%

2. CMP-2: (Feature Wall)

a. Manufacturer: Centria Architectural Systems

b. Style / Color Selections: Formawall Dimension Series

c. Size: Ref. Interior Elevations for panel sizes and alignments

d. Color: PDVF Kynar 500, Aluminum metallic 3-coat color series, 9960 XL Medium Grey

3. CMP-3: (Column Covers)

e. Manufacturer: Alucobond

f. Style / Color Selections: Alucobond Plus; Wet Seal Rout and Return Curved Column Covers

g. Size: Ref. Interior Elevations for panel sizes and alignments

h. Color: PVDF Kynar 500, UNC Medium Gray BN9A646B

4. Composite Metal Panel Type D:

a. Manufacturer: Alucobond

b. Product: Alucobond Plus; Wet Seal Rout and Return

c. Description: .157” Aluminum Composite Metal Panel. 1-3/8” deep.

Metal Spline with ¾” horizontal and vertical reveals.

d. Color: PVDF Kynar 500, UNC Gray Velvet BN8A751B

5. Composite Metal Panel Type E:

a. Manufacturer: Alucobond

b. Product: Alucobond Plus; Wet Seal Rout and Return

c. Description: .157” Aluminum Composite Metal Panel. 1-3/8” deep.

Metal Spline with ¾” horizontal and vertical reveals.

d. Color: PDVF Kynar 500, UNC Medium Gray BN9A646B

Q. 07 60 00 - Prefinished Metal Coping

1. Prefinished Metal Coping Type A:

a. Color to match Metal Wall Panel PDVF Kynar 500, Aluminum metallic 3-coat color series, 9947 Grey Velvet

2. Prefinished Metal Coping Type B:

a. Color to match Metal Wall Panel PDVF Kynar 500, Aluminum metallic 3-coat color series, 9958 XL Champagne Gold

R. 08 41 13 - Aluminum-Framed Entrance and Storefronts

1. Refer to Door Schedule

09 06 00- 7

S. 08 44 13 - Glazed Aluminum Curtain Systems

1. Exterior Glazed Aluminum Window|Curtain System:

a. Manufacturer: Oldcastle Blastmax Reliance

b. Description: Blast resistant curtain wall system with 2 ½” by 7 ½” mullions – Standard

c. 2 ½”H by 7 ½” mullions with 8” deep extruded aluminum face cap where indicated

d. Butt-glazed mullions where indicated

e. Finish: Match Metal Wall Panel PDVF Kynar 500, 9960 XL Medium Grey

T. 08 80 00 – Glazing – General

1. GE-1: (Storefront)

a. Manufacturer:

b. Style / Color Selections: ¼” clear tempered vision glass

c. Installation:

d. Finish:

e. Size: Ref. Architectural and Interior Sheets

2. GE-2: (Storefront)

a. Manufacturer:

b. Style / Color Selections: 3/4” clear tempered vision glass

c. Installation:

d. Finish:

e. Size: Ref. Architectural and Interior Sheets

3. GE-3: (Pharmacy)

a. Manufacturer: CRL – Bullet Resistant Glass

b. Style / Color Selections: S.P.S.A. Level 3 Rated 1-7/8”

c. Installation:

d. Finish:

e. Size: Ref. Architectural and Interior Sheets

U. 08 80 80 – Glazing – Fire Rated

1. FRG-1: (Storefront)

a. Manufacturer: TGP

b. Style / Color Selections: 60 Min. Rated 7/8” Pyrostop Glass

c. Installation:

e. Location: All Interior Doors

V. 08 80 00 – Decorative Glazing

1. Glazing Type A:

a. Manufacturer: Oldcastle BuildingEnvelope

b. Description: Vision Glass | Float Glass

c. IG Vision Unit Characteristics:

i. Exterior Lite – ¼” PPG Solarban 60 on Solargray Low-E #2

ii. Interior Lite – 9/16” Laminate -1/4” Clear – 0.060” Clear PVB – ¼” Clear

iii. ½” Cavity Air

2. Glazing Type B:

a. Manufacturer: Oldcastle BuildingEnvelope

b. Description: Spandrel Glass

c. Spandrel Unit Characteristics:

i. Exterior Lite: 1/4" PPG Solarban 60 on heat-strengthened Solargray Low-E #2

ii. Interior Lite: 9/16" Heat-Strengthened Laminate - 1/4" Clear - .060" Clear PVB - 1/4" Clear with Full Coverage Warm Grey Frit #6

iii. 1/2" Cavity Air

3. Glazing Type C:

a. Manufacturer: Oldcastle BuildingEnvelope

09 06 00- 8

b. Description: Vision | Fritted Glass

c. IG Vision Unit Characteristics:

i. Exterior Lite: 1/4" heat-strengthened PPG Solarban 60 on heat-strengthened Solargray Low-E #2

ii. Interior Lite: 9/16" Laminate - 1/4" Clear with simulated Acid Etch Ceramic Frit Silk-screened #3 Standard Line pattern 50% coverage - .060" Clear PVB - 1/4" Clear

iii. 1/2" Cavity Air

1. DG-6:

a. Manufacturer: M3 Glass Technologies

b. Style Selections: ColorBak - ¼” Tempered back painted glass

c. Installation: Ref. Elevation E8/83-A-253

d. Finish/Color: Gloss, Color - Linen

e. Size:

2. DG-7:

a. Manufacturer: Clarus Glassboards

b. Style Selections: Architectural Series- magnetic dry erase

c. Installation: floor to ceiling application

d. Finish/Color: CBC-100 Pure white

e. Size: Refer Archiectural drawings

W. 08 80 00 – Glazing -- Doors and Windows

1. DG-5:

a. Manufacturer: Pulp Studio

b. Style / Color Selections: Laminated Glass, 5099-2

c. Installation: Doors (Resident Room Doors)

d. Finish: 5/8” white laminated glass

e. Size: Ref. Door Schedule

X. 08 84 00 – Plastic Glazing

1. Structured Multiwalled Plastic Glazing System:

a. Manufacturer: Polygal

b. Product: Multiwalled Structured Polycarbonate Sheet.

c. Polycarbonate Color: Ice

d. Aluminum trim color: Kynar 500, To match Metal Wall Panel, Color: 9947 Grey Velvet

e. Steel Structure Finish: Kynar 500, To match Metal Wall Panel, Color: 9947 Grey Velvet

Y. 08 87 17 – Decorative Window Film

1. Translucent Window Film Type A:

a. Manufacturer: 3M Scotchcal ElectroCut

b. Product: Graphic Film

c. Color: Dusted Crystal 7725SE-314

d. Thickness: 2 mi’

2. WF-1:

a. Manufacturer: 3M

b. Style / Color Selections: Fasara Decorative Film, Fine Crystal

SH2FNCR

c. Installation: Refer Architectural drawings, Interior Elevations.

09 06 00- 9

3. WF-2:

a. Manufacturer: 3M

b. Style / Color Selections: Fasara Decorative Film, Opaque White

SH2MAOW

c. Installation: Refer Architectural drawings, Interior Elevations.

4. WF-3:

a. Manufacturer: 3M

b. Style / Color Selections: Fasara Decorative Film, Illumina

SH2FGIM

c. Installation: Refer Architectural drawings, Interior Elevations.

5. WF-4:

a. Manufacturer: 3M

b. Style / Color Selections: Fasara Decorative Film, Luce SH2FGLU

c. Installation: Refer Architectural drawings, Interior Elevations.

Z. 08 90 00 - Louvers and Vents

1. Louver:

a. Manufacturer: Construction Specialties

b. Product: DC-5304

c. Finish: PDVF Kynar 500, To match Metal Wall Panel, 9958 XL

Champagne Gold

AA. 08 97 10 – Suspended Glass System

1. SGS-1:

a. Manufacturer:

b. Style / Color Selections:1/2” Laminated and Tempered Glass

c. Installation: : Paragon Architectural Glass Products 316 SS

Spider Fittings 200B Series with TF13 cap

d. Finish: Clear glass with WF-4 film on back surface

e. Size: Ref. Architectural Sheets

BB. 09 24 00 - Portland Cement Plastering

1. Stucco Type A:

a. Manufacturer: Parex Usa

b. Product: Portland cement plaster, exterior stucco

c. Description: three-coat application

d. Finish: Fine finish

e. Color: To match Glidden, Etching #50GY 53/017

2. Stucco Type B:

a. Manufacturer: Parex Usa

b. Product: Portland cement plaster, exterior stucco

c. Description: three-coat application

d. Finish: Fine finish

e. Color: To match Glidden, Grimmy’s Grey #00NN 20/000

CC. 09 29 00 – Gypsum Board

1. PP-1:

a. Manufacturer: Modular Arts

b. Style / Color Selections: STREAM

c. Size: 32” x 32”

d. Installation: Interlocking Panels ensure panel-to-panel alignment, screw mounted over substrate. Installation must be by an approved and trained installer.

e. Finish: Flat Paint – P-1 (Benjamin Moore I-04 Decorators White)

f. Material: Mineral Composite Panels

09 06 00- 10

DD. 09 30 13 – Ceramic & Porcelain Tiling

1. CT-1:

a. Manufacturer: DalTile

b. Size: 4 1/4” X 12 3/4” X 5/16” thick

c. Style / Color Selections: Modern Dimensions, 0790 Artic

White

d. Finish: Glazed Ceramic, Matte

e. Installation: Epoxy grout with 1/16” joints

2. CT-3:

a. Manufacturer: Interceramic

b. Size: 4 1/4” X 12 3/4” X 5/16” thick

c. Style / Color Selections: Solutions InDesign Collection, Bone

d. Finish: Gloss

e. Installation: Epoxy grout with 1/16” joints

3. CT-4:

a. Manufacturer: Daltile

b. Size: 3”x6”

c. Style / Color Selections: Color Wheel Collection – Classic, White 0100

d. Installation: Epoxy grout with 1/8” joints

4. CT-5:

a. Manufacturer: Daltile

b. Size: 4 1/4” X 12 3/4”

c. Style / Color Selections: Color Wheel Collection – Linear, Biscuit K175

d. Finish: Light Polished

5. CT-6:

a. Manufacturer: Daltile (Cove Base)

b. Size: 4 1/4” X 8”

c. Style / Color Selections: Color Wheel Collection – Classic, S3419T, Biscuit K175

d. Finish: Light Polished

e. Installation: Epoxy grout

6. PT-1:

a. Manufacturer: Horizon Tile

b. Size: 12” X 24”

c. Style / Color Selections: HIT 120, Run Clay

d. Installation: Epoxy grout with 1/8” joints

7. PT-2:

a. Manufacturer: Concept Surfaces

b. Size: 12” X 24” X 3/8” thick

c. Style / Color Selections: Acadia series - white

d. Finish: Matte

e. Installation: Epoxy grout with 1/8” joints

EE. 09 30 13 – Glass Mosaic Tiling

1. GT-1:

a. Manufacturer: Daltile

b. Size: 1” X 2” Brick Joint

c. Style / Color Selections: Color Wave, Winter Blues CW27, Glossy

d. Installation: Epoxy grout, Mesh Backed

2. GT-3:

a. Manufacturer: Crossville

b. Size: 1” X 2”

c. Style / Color Selections: Glass Blox, Blend GB11

d. Installation: Mesh backed, Epoxy grout

3. GT-4:

a. Manufacturer: Interceramic

b. Size: 3” X 6”

c. Style / Color Selections: Brilliance, White, Clear Finish

09 06 00- 11

d. Installation: Epoxy grout with 1/8” joint

4. GT-5:

a. Manufacturer: Daltile

b. Size: 3” X 6”

c. Style / Color Selections: Color Wave, Feather White CW02

d. Installation: Epoxy grout with 1/8” joints

5. GT-6:

a. Manufacturer: Interceramic

b. Size: 12” X 24”

c. Style / Color Selections: Color Theory, White Frost, Polished

d. Installation: Epoxy grout with 1/8” joints

6. GT-7:

a. Manufacturer: Daltile

b. Size: 1” X 2” Brick Joint

c. Style / Color Selections: Color Wave, Rain Forest CW25, Glossy

d. Installation: Epoxy grout with 1/8” joints

FF. 09 30 13 – Finishing and Edge Protections

1. TT-1:

a. Manufacturer: Schluter Systems

b. Size: 1/4”, 5/16”, 3/16” (G.C. to verify per tile location)

c. Style / Color Selections: Jolly, AT – Satin Nickel Anodized

Aluminum

GG. 09 51 00 – Acoustical Ceilings

1. AT-1:

a. Manufacturer: Armstrong

b. Size: 24” X 24” X 3/4”

c. Style / Color Selections: Optima Fine Texture White

d. Edge Detail: Square Tegular

e. Grid System: 9/16” Suprafine, White

2. AT-2:

a. Manufacturer: Armstrong

b. Size: 24” X 24” X 3/4”

c. Style / Color Selections: Optima Fine Texture White

d. Edge Detail: Square

e. Grid System: 15/16” Prelude XL

3. AT-3:

a. Manufacturer: Armstrong

b. Size: 24” X 24” X 3/4”

c. Style / Color Selections: Health Zone Optima White

d. Edge Detail: Square

e. Grid System: 15/16” Prelude XL

HH. 09 54 26 – Linear Wood Ceilings

1. LWC-1:

a. Manufacturer: Armstrong – WOODWORKS Grille

b. Size: Blade 5/8” X 2 ¼” X 8’, Panel 1’ X 8”

c. Style / Color Selections: Woodworks Grille with Dowel

Construction, Walnut Finish

d. Edge Detail: Trim as req’d

e. Grid System: 15/16” Prelude Exposed “T”

II. 09 62 29 - Cork Flooring

1. CK-1:

a. Manufacturer: Expanko Prestige

b. Style / Color Selections: Terra Tile Light

c. Size: 24” X 24”

09 06 00- 12

d. Standard Thickness: 5/16”

e. Finish: Matte Polyurethane, two additional coats of “Bona

Kemi Traffic”

f. Water based polyurethane after install.

2. CK-2:

a. Manufacturer: Expanko Prestige

b. Style / Color Selections: Terra Tile Dark

c. Size: 24” X 24”

d. Standard Thickness: 5/16”

e. Finish: Matte Polyurethane, two additional coats of “Bona

Kemi Traffic” water based polyurethane after install

JJ. 09 65 13 - Resilient Base and Accessories

1. RB-1:

a. Manufacturer: Johnsonite

b. Style / Color Selections: Color Match, 48 Grey

c. Height: 120’ X 4" high rolls

d. Type: Cove at hard-surface flooring, Straight at carpet.

2. RB-2:

a. Manufacturer: Johnsonite

b. Style / Color Selections: 284 Ganache

c. Height: 120’ X 4" high rolls

d. Type: Cove at hard-surface flooring, straight at carpet.

3. RB-3:

a. Manufacturer: Johnsonite

b. Style / Color Selections: Color Match, 38 Pewter CG

c. Height: 120’ X 4" high rolls

d. Type: Cove at hard-surface flooring, straight at carpet.

4. RB-4 Not Used

5. RB-5:

a. Manufacturer: Nora Systems

b. Style / Color Selections: Nora Sanitary Base, Color: 7033

c. Height: 32.8’/10.0m roll, 5.98/152 mm ht

d. Type: cove base to be heat welded to nora plan envirocare

KK. 09 65 16 - Resilient Sheet Flooring

1. VSF-3:

a. Manufacturer: Nora

b. Style / Color Selections: Noraplan Environcare, Color 7055

c. Size: 39.37’ X 48” X .12”/3.0 mm thick

d. Installation: Heat Weld

2. VSF-4:

a. Manufacturer: Nora

b. Style / Color Selections: Noraplan Environcare, Color 7065

c. Size: 39.37’ X 48” X .12”/3.0 mm thick

d. Installation: Heat Weld

3. VSF-5:

a. Manufacturer: Nora

b. Style / Color Selections: Noraplan Environcare, Color 7033

c. Size: 39.37’ X 48” X .12”/3.0 mm thick

g. Installation: Heat Weld, provide Integral base when required.

LL. 09 65 19 – Resilient Tile Flooring

1. VCT-1: (Light Warm Grey)

2. Manufacturer: Tarkett

3. Size: 12” X 12”

4. Style / Color Selections: Tarkett IQ Eminent #21030-879

5. VCT-2: (Warm Grey)

6. Manufacturer: Tarkett

7. Size: 12” X 12”

09 06 00- 13

8. Style / Color Selections: IQ Granit Sense #21142-296

9. VCT-3: (Warm Light Grey)

10. Manufacturer: Tarkett

11. Size: 12” X 12”

12. Style / Color Selections: IQ Granit Sense #21142-234

13. VCT-4: (Soft Sand Brown)

14. Manufacturer: Tarkett

15. Size: 12” X 12”

16. Style / Color Selections: IQ Granit Sense #21142-752

17. LVT-1:

a. Manufacturer: Gerflor North America

b. Size: 6” x 36”

c. Style / Color Selections: Creation – 0552 Tanami

18. LVT-2:

a. Manufacturer: Armstrong

b. Size: 18” X 18” X.125” thick

c. Style / Color Selections: Natural Creations, Diamond 10 Mystix, NA892 Stream, Greige

19. LVT-4:

a. Manufacturer: Tarkett

b. Size: 18” X 18”

c. Style / Color Selections: Color Play / Color Pop #PCOP C147 QU Sand Dollar

20. LVT-5:

a. Manufacturer: Tarkett

b. Size: 18” X 18”

c. Style / Color Selections: Color Play / Color Weave #PCWE C166 QU Farrow

21. RT-1:

a. Manufacturer: Tarkett Stairwell Management

b. Size: Landing Tile - 18 1/8”” X 18 1/8” X .125” gauge. – Raised Square

c. Stair Treads – Raised Square – 13” X 48” & 72”

d. Risers – 7” X 48” & 72”

e. Wall Base – Rubber 4”

a. Color: TB1 Peppercorn

MM. 09 67 23.50 – Resinious (Epoxy Terrazzo) Flooring (Terrazzo base shall be integral to terrazzo flooring and color of base shall be determined by floor pattern).

1. TST-1: (white)

a. Manufacturer: American Terrazzo

b. Style: Poured Epoxy

c. Project: VA Hospital, PSP ARCH

d. Plate: #100, 11-16-11

2. TST-2: (grey)

a. Manufacturer: American Terrazzo

b. Style: Poured Epoxy

c. Project: VA Hospital, PSP ARCH

d. Plate: #101, 11-16-11

3. TST-3: (yellow)

a. Manufacturer: American Terrazzo

b. Style: Poured Epoxy

c. Project: VA Hospital, PSP ARCH

d. Plate: #102, 11-16-11

4. TST-4: (blue)

a. Manufacturer: American Terrazzo

b. Style: Poured Epoxy

c. Project: VA Hospital, PSP

d. Plate: #107, 1-6-12

5. TST-5: (black)

09 06 00- 14

a. Manufacturer: American Terrazzo

b. Style: Poured Epoxy

c. Project: VA Hospital, PSP

d. Plate: #106, 12-15-11

NN. 09 68 00 – Carpeting

1. CPT-1:

a. Manufacturer: Shaw

b. Style / Color Selections: Prairie, 59525 - Driftwood

c. Size: 24” X 24” (Install Monolithic)

d. Construction: Multi-Level Pattern Loop

e. Tufted Yarn Weight: 28 oz

f. Fiber Content: Eco Solution Q Nylon, Solution Dyed

g. Backing: Ecoworx Tile.

2. CPT-3:

a. Manufacturer: Milliken

b. Style / Color Selections: Windows – Windowscape – WNS70 Sunset

c. DR Number: 01215155

d. Size: 50CM X 50CM (Install Monolithic)

3. CPT-4:

a. Manufacturer: Shaw

b. Style / Color Selections: Dissolve Tile, 59566, Ashen Metal 66505

c. Size: 24” X 24” (Install Monolithic)

d. Construction: Multi-level Pattern Cut/Loop

e. Tufted Yarn Weight: 38 OZ

f. Fiber Content: Eco Solution Q Nylon, Solution Dyed

g. Backing: Ecoworx Tile.

4. CPT-5:

a. Manufacturer: Shaw Contract group

b. Style / Color Selections: Plain Weave Tile 5T098

c. Color: Sanskrit 99906

d. Size: 24” X 24” (Install Monolithic)

e. Construction: Multi-level Pattern Cut/Loop

f. Tufted Yarn Weight: 38 OZ

g. Fiber Content: 43% Solution Dyed/ 57% yard dyed

h. Backing: Ecoworx Tile

OO. 09 72 16 – Vinyl – Coated Fabric Wall Coverings

1. W-18: (Refer to 10 22 26.33 - Folding Panel Partitions)

a. Manufacturer: DesignTex

b. Style: Luma

c. Color: Wheat 111873-710

d. Width: 56”

e. Content: 12% Polyester (Preconsumer Recycled), 37% Olefin, 44% Polyester, 7% Polyester (Postconsumer Recycled)

f. Weight: 12.28 0z. Linear Yard

g. Backing: FR Acrylic

PP. 09 84 33 – Sound Absorbing Wall Units (Homasote wrapped panels)

1. FP-1:

a. Manufacturer: Knoll

b. Style: Heavy Metal – W539/2

c. Color Selection: Pewter

d. Content: polypropylene Tape 51%, Recycled Polyester 49%

e. Width: 60”

f. Backing: Acrylic

g. Installation: Reference Interior Drawings

2. FP-2:

a. Manufacturer: Knoll

b. Style: Guild – WC1441/7

c. Color Selection: Coil

09 06 00- 15

d. Content: Recycled polyester 65%, Olefin 35%

e. Width: 54”

f. Backing: Acrylic

g. Installation: Reference Interior Drawings

QQ. 09 91 00 – Painting

1. PNT-1:

a. Manufacturer: Benjamin Moore

b. Style: Interior Latex

c. Color Selection: Decorators White, I-04

d. Finish: Satin

2. PNT-2A:

a. Manufacturer: Sherwin Williams

b. Style: Interior Latex

c. Color Selection: Alabaster SW7008

d. Finish: Satin

3. PNT-2B:

a. Manufacturer: Sherwin Williams

b. Style: Interior Epoxy

c. Color Selection: Alabaster SW7008

d. Finish: Epoxy

4. PNT-4:

a. Manufacturer: Sherwin Williams

b. Style: Interior Latex

c. Color Selection: Festoon Aqua SW0019

d. Finish: Satin

5. PNT-6:

a. Manufacturer: Sherwin Williams

b. Style: Interior Latex

c. Color Selection: Cityscape SW7067

d. Finish: Satin

6. PNT-8:

a. Manufacturer: Sherwin Williams

b. Style: Interior Latex

c. Color Selection: Breezy SW7616

d. Finish: Satin

7. PNT-9:

a. Manufacturer: Sherwin Williams

b. Style: Interior Latex

c. Color Selection: Obstinate Orange, SW6884

d. Finish: Gloss

8. PNT-10:

a. Manufacturer: Sherwin Williams

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Tricorn Black, SW6258

d. Finish: Satin

9. PNT-11: (Safety Bollards)

a. Manufacturer: N/A

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Caution Yellow

d. Finish: Satin

10. PNT-12: (CMU)

a. Manufacturer: Sherwin Williams

b. Style: 100% Acrylic (Prepare wall with Block Filler primer).

c. Color Selection: Alabaster SW7008

d. Finish: Satin

11. PNT-13:

a. Manufacturer: PDVF Kynar 500

b. Style: Aluminum Metallic 3-Coat Color Series

c. Color Selection: 9958 XL Champagne Gold

d. Finish: Satin

e. Locations: All exterior aluminum doors and frames that are part of a curtain-wall or store-front system.

09 06 00- 16

12. PNT-14:

a. Manufacturer: Sherwin Williams

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Alabaster SW7008

d. Finish: Interior door frames

13. PNT-15:

a. Manufacturer: PDVF Kynar 500

b. Style: Aluminum Metallic 3-Coat Color Series

c. Color Selection: 9960 XL Medium Grey

d. Finish: Satin

e. Locations: All interior aluminum doors and frames in precast panels and all resident balcony doors.

14. PNT-16:

a. Manufacturer: PDVF Kynar 500

b. Style: Aluminum Metallic 3-Coat Color Series

c. Color Selection: 9960 XL Medium Grey

d. Finish: Satin

e. Locations: All exterior aluminum doors and frames in precast panels and all resident balcony doors.

15. PNT-17:

a. Manufacturer: Sherwin Williams

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Gray Screen SW 7071

d. Finish: Satin

16. PNT-18:

a. Manufacturer: Sherwin Williams

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Grizzle Gray SW 7068

d. Finish: Satin

17. PNT-19:

a. Manufacturer: Benjamin Moore

b. Style: Oil/Alkyd (prep steel with a metal primer).

c. Color Selection: Decorators White, I-04

d. Finish: Satin

18. PNT-20: (Modernfold standard Trim & Hinge color selection)

a. Manufacturer: Modernfold

b. Style:

c. Color Selection: Smoke Gray, SW6002

d. Finish:

19. PNT-21: (Hufcor Standard Trim Color Selector)

a. Manufacturer: Hufcor

b. Style: Vertical Lift Panel Room Divider

c. Color Selection: Gray

RR. 10 26 00 – Wall Protection

1. WP-1:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free,

c. Type: Crashrail #SCR-48N & Bumper Rail #BCR-48N with Sheet Protection 4’ X 8’ Sheet, .060 Gauge

d. Color/Texture: Suede/Shadowgrain in Eggshell #100

e. Installation: Reference Interior Drawings for additional details

2. WP-2:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free,

c. Type: Hand Rail #P-OAAN with Sheet Protection 4’ X 8’ Sheet, .060 Gauge

d. Color/Texture: Suede/Shadowgrain in Eggshell #100

e. Installation: Reference Interior Drawings for additional details

3. WP-3:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free, 09 06 00- 17

c. Type: Hand Rail #P-RWS & Bumper Rail #SCR-40N with Sheet Protection 4’ X 8’ Sheet, .060 Gauge

d. Color/Texture: Suede/Shadowgrain in Eggshell #100

e. Wood Finish: Classic Maple #372

f. Installation: Refer to Interior Drawings for additional details

4. WP-4:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free,

c. Type: Crashrail #SCR-48N & Sheet Protection 4’ X 8’ Sheet, .060 Gauge

d. Color/Texture: Suede/Shadowgrain in Eggshell #100

e. Installation: Reference Interior Drawings for additional details

5. WP-5:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free,

c. Type: Crashrail to match adjacent existing

d. Color/Texture: To match adjacent existing

e. Installation: Reference Interior Drawings for additional details

6. WP-6:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free,

c. Type: Hand Rail #P-OAAN & Crashrail to match adjacent existing

d. Color/Texture: Crashrail to match adjacent existing. Handrail to match crashrail color.

e. Installation: Reference Interior Drawings for additional details.

7. CG-1:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Acrovyn 4000 PVC Free, Eggshell #100

c. Type: Corner Guard SM-20; 3” Wide with ¼” Radius; Full height

d. Texture: Shadow Grain

8. CG-2:

a. Manufacturer: C/S Acrovyn

b. Style / Color Selections: Stainless, #4 Satin Finish

c. Type: Surface Mounted Stainless Steel Corner Guards 90° stainless steel corner guard with 3-½" (88.9mm) standard legs, CO-8. Mounted with construction adhesive standard.

d. Texture: 304 Stainless Alloy

SS. 10 71 00 - Exterior Protection

1. Sun Control Device Type A:

a. Manufacturer: Construction Specialties, Inc.

b. Product: Model 200-4SIDH – Vertical Screen with Horizontal Blades

c. Factory Assembled Vertical Screen Sun Control Sections

d. Blades- 8” x 1 1/2" Slender Profile Long Span Extruded Aluminum Airfoil Profile

e. Frame Surround- 2-Piece 1’ x 8” Extruded Aluminum Surround

f. Intermediate Mullions- Minimum ¼” x 8” Aluminum Plate

g. Engineered to Project Specific Wind, Snow and Blast Impulse Criteria

h. Finish: PDVF Kynar 500, To match Metal Wall Panel, 9960 XL Medium Grey

TT. 12 17 00 – Art Glass

1. AG-1: (Memorial Wall)

a. Manufacturer: Studio Art’s Desire

b. Artist: Polly Gessell / Gessell Studios (Dallas, TX)

c. Style: Etched Glass Panels, 9 panels, ½” thick, 24”W x72”H.

d. Color Selection: Starphire Glass

e. Contact: Freda Vaughn, 214-668-4490 This is a conceptual design and may vary per final artist design.

09 06 00- 18

UU. 12 24 00 – Window Shades

1. WS-1: Window Shades

a. Manufacturer: MechoShade

b. Style: Electro/2 Extended Bracket with MecoNet Network Interface for shade and drapery motors, switches and accessories.

c. Color Selections: EcoVeil Naturals sheer/6850 Series, 1-2% Openness, #6753 Glass

d. Installation: Recessed Ceiling Pocket.

(Coordinate all environmental control requirements with manufacturer’s rep.)

2. WS-2: Window Shades

a. Manufacturer: MechoShade

b. Style: Electro/2 Extended Bracket with MechoNet Network Interface for shade and drapery motors, switches and accessories.

c. Color Selections: Thermo Veil Basket Weave, 1500 Series (3% open), 1501 White

d. Installation: Recessed Ceiling Pocket.

3. WS-3: Window Shades (Resident Rooms)

a. Manufacturer: MechoShade

b. Style: Electro/2 Extended Bracket, IQ2 Whisper Shade Motor w/ MechoNet Network Interface for shade and drapery motors, switches and accessories.

c. Color Selections: ThermoVeil Vertical Privacy Weave, 0900 Series, 0-1% Open, 0910 Light Grey

d. Installation: Recessed Ceiling Pocket.

(Coordinate all environmental control requirements with manufacturer’s rep.)

VV. 12 36 00 – Countertops

1. SS-1:

a. Manufacturer: Dupont Zodiaq

b. Style / Color Selections: Cloud White

c. Size: 4’ X 8’ X 2cm thick sheets

d. Finish: Polished

09 06 00- 19

2. SS-2:

a. Manufacturer: Dupont Zodiaq

b. Style / Color Selections: Coarse Marfil

c. Size: Sheet 4’ X 8’ X 2cm

d. Finish: Polished

3. SS-3:

a. Manufacturer: Dupont Zodiaq

b. Style / Color Selections: Mystic Black

c. Size: Sheet 4’ X 8’ X 2cm

d. Finish: Polished

4. SS-4:

a. Manufacturer: Dupont Corian

b. Style / Color Selections: Terra Collection, Whisper

c. Size: Sheet 4’ X 8’ X 2cm

d. Finish: Matte

WW. 12 44 16 – Shower Curtains

1. SC-1: Shower Curtain

a. Manufacturer: Maharam

b. Pattern: Sing 511490

c. Color: 004 Breeze

d. NOTE: Liner provided by owner

XX. 12 48 13 – Entrance Floor Mats and Frames

1. FG-1: Walk-Off Grid

a. Manufacturer: C/S Group

b. Pattern: Pedimat M1, Pedimat with Aluminum Level Base Frame

c. Finish: Pedisystem Standard Inset Color MonoTuft HD, 9322 Slate

d. Installation: ½” recessed mat

YY. 12 64 23 - Banquette Seating

1. BS-1: Banquette Seating (Seat)

a. Manufacturer: Martin Brattrud Inc.

b. Style: La Purisima 955-01, standard armless unit

c. Size: 30”OW, 31”OD, 35.5”OH, 18.5”SH, 21”SD

d. Manufacturer: Maharam

e. Pattern: Scuba 464930

f. Color: Coral 022

g. Location: Resident Dining | Serving

2. BS-2: Banquette Seating (Back)

a. Manufacturer: Martin Brattrud Inc.

b. Style: La Purisima 955-01, standard armless unit

c. Size: 30”OW, 31”OD, 35.5”OH, 18.5”SH, 21”SD

d. Manufacturer: Maharam

e. Pattern: Coincide 465808

f. Color: Aurora 005

g. Location: Resident Dining | Serving

3. FS-1: Fabric Cushion Seating

a. Manufacturer: Maharam

b. Pattern: Rail 466535

c. Color: 005 Benchmark

d. Location: Resident Day Room | Lounges

ZZ. 14 21 00 – Electric Traction Elevators (Elevator Interiors)

1. ETE-1 (P1 and P2)

a. Manufacturer: Forms + Surfaces

b. Pattern: Levele-104

c. Finish: Stainless Steel - Ref. Architectural Elevations, Elevators 83-A-471 for finish patterns, lighting and flooring

09 06 00- 20

2. ETE-2 (P5/P6 and S3/S4)

a. Manufacturer: Forms + Surfaces

b. Pattern: CABFORMS SERIES 1000-A

c. Finishes: Stainless Steel – Ref. Architectural Elevations, Elevators 83-A-471 for finish patterns, lighting and flooring.

AAA. 32 14 23 - Concrete Pavers

1. Pavers Type A:

a. Manufacturer: Wausau Pavers

b. Description: Pressed Concrete Architectural Pavers

c. Product: Granitex

d. Size: Rectangular 12”x24”, 3” Thick

e. Color: GTX-10

2. Pavers Type B:

a. Manufacturer: Wausau Pavers

b. Description: Pressed Concrete Architectural Pavers

c. Product: Granitex

d. Size: Rectangular 12”x24”, 3” Thick

e. Color: GTX-30

3. Precast Concrete Bollard:

a. Manufacturer: Wausau Tile

b. Description: Reinforced Concrete Bollard

c. Product: TF60221

d. Size: 12” Diameter x 40” High

e. Color: Weatherstone W31 Fog

BBB. 32 95 00 – Exterior Planting Support Structures

1. Wall Mounted Trellis System:

a. Manufacturer: Greenscreen

b. Product: Wall Mounted Trellis Panel 3” Depth

c. Accessory Options: #5104 Steel Channel Trim, #5105 Steel Edge Trim

d. Finish: Galvanized wire panels with multigrade alkaline wash

- - - END - - -

09 22 16 - 1

SECTION 09 22 16

NON-STRUCTURAL METAL FRAMING

PART 1 - GENERAL

1.1 DESCRIPTION

This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories for the screw attachment of gypsum board, or other building boards.

1.2 RELATED WORK

A. Load bearing framing: Section 05 40 00 - COLD-FORMED METAL FRAMING.

B. Support for wall mounted items: Section 05 50 00 - METAL FABRICATIONS.

C. Pull down tabs in steel decking: Section 05 36 00 - COMPOSITE

METAL DECKING.

D. Installation for rigid insulation: Section 07 21 13 – THERMAL

INSULATION.

E. Ceiling suspension systems for acoustical tile or panels and lay in gypsum board panels: Section 09 51 00 - ACOUSTICAL CEILINGS, Section 09 29 00 - GYPSUM BOARD.

1.3 TERMINOLOGY

A. Description of terms shall be in accordance with ASTM C754, ASTM C11, ASTM C841 and as specified.

B. Underside of Structure Overhead: In spaces where steel trusses or bar joists are shown, the underside of structure overhead shall be the underside of the floor or roof construction supported by beams, trusses, or bar joists. In interstitial spaces with walk-on floors the underside of the walk-on floor is the underside of structure overhead.

C. Thickness of steel specified is the minimum bare (uncoated) steel thickness.

1.4 SUBMITTALS

A. Submit in accordance with Section 01 33 23 - SHOP DRAWINGS, PRODUCT DATA

AND SAMPLES.

B. Manufacturer's Literature and Data:

1. Studs, runners and accessories.

2. Hanger inserts.

3. Channels (Rolled steel).

4. Furring channels.

5. Screws, clips and other fasteners.

C. Shop Drawings:

1. Typical ceiling suspension system.

09 22 16 - 2

2. Typical metal stud and furring construction system including details around openings and corner details.

3. Typical shaft wall assembly

4. Typical fire rated assembly and column fireproofing showing details of construction same as that used in fire rating test.

D. Test Results: Fire rating test designation, each fire rating required for each assembly.

1.5 DELIVERY, IDENTIFICATION, HANDLING AND STORAGE

In accordance with the requirements of ASTM C754.

1.6 APPLICABLE PUBLICATIONS

A. The publications listed below form a part of this specification to the extent referenced. The publications are referenced in the text by the basic designation only.

B. American Society for Testing and Materials (ASTM)

A123....................Zinc (Hot-dip Galvanized) Coatings on Iron and

Steel Products

A641....................Zinc-Coated (Galvanized) Carbon Steel Wire

C11.....................Terminology Relating to Gypsum and Related

Building Materials and Systems

C635....................Manufacture, Performance, and Testing of Metal

Suspension System for Acoustical Tile and Lay-in

Panel Ceilings

C636....................Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels

C645....................Non-Structural Steel Framing Members

C754....................Installation of Steel Framing Members to Receive

Screw-Attached Gypsum Panel Products

C841....................Installation of Interior Lathing and Furring

C954....................Steel Drill Screws for the Application of Gypsum

Panel Products or Metal Plaster Bases to Steel

Studs from 0.033 in. (0.84 mm) to 0.112 in.

(2.84 mm) in Thickness

C1002...................Steel Self-Piercing Tapping Screws for the

Application of Gypsum Panel Products or Metal

Plaster Bases to Wood Studs or Steel Studs

09 22 16 - 3

PART 2 - PRODUCTS

2.1 PROTECTIVE COATING

Galvanize steel studs, runners (track), rigid (hat section) furring channels, "Z" shaped furring channels, and resilient furring channels, with coating designation of G-60 minimum, per ASTM A123.

2.2 STEEL STUDS AND RUNNERS (TRACK)

A. ASTM C645, modified for thickness specified and sizes as shown.

1. Use ASTM A525 steel, 0.8 mm (0.0329-inch) thick bare metal (33 mil).

2. Runners same thickness as studs.

B. Provide not less than two cutouts in web of each stud, approximately 300 mm (12 inches) from each end, and intermediate cutouts on approximately

600 mm (24-inch) centers.

C. Doubled studs for all openings and studs for supporting concrete backer-board.

D. Studs 3600 mm (12 feet) or less in length shall be in one piece.

E. Shaft Wall Framing:

1. Conform to rated wall construction.

2. C-H Studs.

3. E Studs.

4. J Runners.

5. Steel Jamb-Strut.

2.3 FURRING CHANNELS

A. Rigid furring channels (hat shape): ASTM C645.

B. "Z" Furring Channels:

1. Not less than 0.45 mm (0.0179-inch) -thick bare metal, with 32 mm

(1-1/4 inch) and 19 mm (3/4-inch) flanges.

2. Web furring depth to suit thickness of insulation with slotted perforations.

D. Rolled Steel Channels: ASTM C754, cold rolled; or, ASTM C841, cold rolled.

2.4 FASTENERS, CLIPS, AND OTHER METAL ACCESSORIES

A. ASTM C754, except as otherwise specified.

B. For fire rated construction: Type and size same as used in fire rating test.

C. Fasteners for steel studs thicker than 0.84 mm (0.033-inch) thick. Use

ASTM C954 steel drill screws of size and type recommended by the manufacturer of the material being fastened.

D. Clips: ASTM C841 (paragraph 6.11), manufacturer’s standard items. Clips used in lieu of tie wire shall have holding power equivalent to that provided by the tie wire for the specific application.

09 22 16 - 4

E. Concrete ceiling hanger inserts (anchorage for hanger wire and hanger straps): Steel, zinc-coated (galvanized), manufacturers standard items, designed to support twice the hanger loads imposed and the type of hanger used.

F. Tie Wire and Hanger Wire:

1. ASTM A641, soft temper, Class 1 coating.

2. Gage (diameter) as specified in ASTM C754 or ASTM C841.

G. Attachments for Wall Furring:

1. Manufacturers standard items fabricated from zinc-coated (galvanized) steel sheet.

2. For concrete or masonry walls: Metal slots with adjustable inserts or adjustable wall furring brackets. Spacers may be fabricated from 1 mm

(0.0396-inch) thick galvanized steel with corrugated edges.

H. Power Actuated Fasteners: Type and size as recommended by the manufacturer of the material being fastened.

2.5 SUSPENDED CEILING SYSTEM FOR GYPSUM BOARD (OPTION)

A. Conform to ASTM C635, heavy duty, with not less than 35 mm (1-3/8 inch) wide knurled capped flange face designed for screw attachment of gypsum board.

B. Wall track channel with 35 mm (1-3/8 inch) wide flange.

PART 3 - EXECUTION

3.1 INSTALLATION CRITERIA

A. Where fire rated construction is required for walls, partitions, columns, beams and floor-ceiling assemblies, the construction shall be same as that used in fire rating test.

B. Construction requirements for fire rated assemblies and materials shall be as shown and specified, the provisions of the Scope paragraph (1.2) of ASTM C754 and ASTM C841 regarding details of construction shall not apply.

3.2 INSTALLING STUDS

A. Install studs in accordance with ASTM C754, except as otherwise shown or specified.

B. Space studs not more than 400 mm (16 inches) on center.

C. Cut studs 6 mm to 9 mm (1/4 to 3/8-inch) less than floor to underside of structure overhead when extended to underside of structure overhead.

D. Where studs are shown to terminate above suspended ceilings, provide bracing as shown or extend studs to underside of structure overhead.

E. Extend studs to underside of structure overhead for fire, rated partitions, smoke partitions, shafts, and sound rated partitions.

09 22 16 - 5

G. Openings:

1. Frame jambs of openings in stud partitions and furring with two studs placed back to back or as shown. Minimum 20 gauge.

2. Fasten back to back studs together with 9 mm (3/8-inch) long Type S pan head screws at not less than 600 mm (two feet) on center, staggered along webs.

3. Studs fastened flange to flange shall have splice plates on both sides approximately 50 X 75 mm (2 by 3 inches) screwed to each stud with two screws in each stud. Locate splice plates at 600 mm (24 inches) on center between runner tracks.

H. Fastening Studs:

1. Fasten studs located adjacent to partition intersections, corners and studs at jambs of openings to flange of runner tracks with two screws through each end of each stud and flange of runner.

2. Do not fasten studs to top runner track when studs extend to underside of structure overhead.

Do not attach top runner track to roof deck.

I. Chase Wall Partitions:

1. Locate cross braces for chase wall partitions to permit the installation of pipes, conduits, carriers and similar items.

2. Use studs or runners as cross bracing not less than 63 mm (2-1/2 inches wide).

J. Form control joint, with double studs spaced 13 mm (1/2-inch) apart.

3.3 INSTALLING WALL FURRING FOR FINISH APPLIED TO ONE SIDE ONLY

A. In accordance with ASTM C754, or ASTM C841 except as otherwise specified or shown.

B. Wall furring-Stud System:

1. Framed with 63 mm (2-1/2 inch) or narrower studs, 600 mm (24 inches) on center.

2. Brace as specified in ASTM C754 for Wall Furring-Stud System or brace with sections or runners or studs placed horizontally at not less than three foot vertical intervals on side without finish.

3. Securely fasten braces to each stud with two Type S pan head screws at each bearing.

C. Direct attachment to masonry, concrete or other surfaces shown; rigid channels or "Z" channels:

1. Install rigid (hat section) furring channels at 600 mm (24 inches) on center, horizontally or vertically.

2. Install "Z" furring channels vertically spaced not more than 600 mm

(24 inches) on center.

09 22 16 - 6

3. At corners where rigid furring channels are positioned horizontally, provide mitered joints in furring channels.

4. Ends of spliced furring channels shall be nested not less than 200 mm

(8 inches).

5. Fasten furring channels to walls with power-actuated drive pins or hardened steel concrete nails. Use other fasteners appropriate to the substrate being attached to. Where channels are spliced, provide two fasteners in each flange.

6. Locate furring channels at interior and exterior corners in accordance with wall finish material manufacturers printed erection instructions. Locate "Z" channels at corners to support insulation.

D. Installing Wall Furring-Bracket System: Space furring channels not more than 400 mm (16 inches) on center.

3.4 INSTALLING SUPPORTS REQUIRED BY OTHER TRADES

A. Provide for attachment and support of electrical outlets, plumbing, laboratory or heating fixtures, recessed type plumbing fixture accessories, access panel frames, wall bumpers, wood seats, toilet stall partitions, dressing booth partitions, urinal screens, chalkboards, tackboards, wall-hung casework, handrail brackets, recessed fire extinguisher cabinets and other items like auto door buttons and auto door operators supported by stud construction.

B. Provide additional studs where required. Install metal backing plates, or special metal shapes as required, securely fastened to metal studs.

3.5 INSTALLING SHAFT WALL SYSTEM

A. Conform to UL Design No. U438 for two-hour fire rating.

B. Position J runners at floor and ceiling with the short leg toward finish side of wall. Securely attach runners to structural supports with power driven fasteners at both ends and 600 mm (24 inches) on center.

C. After liner panels have been erected, cut C-H studs and E studs, from 9 mm (3/8-inch) to not more than 13 mm (1/2-inch) less than floor-to-ceiling height. Install C-H studs between liner panels with liner panels inserted in the groove.

D. Install full-length steel E studs over shaft wall line at intersections, corners, hinged door jambs, columns, and both sides of closure panels.

E. Suitably frame all openings to maintain structural support for wall:

1. Provide necessary liner fillers and shims to conform to label frame requirements.

2. Frame openings cut within a liner panel with E studs around perimeter.

09 22 16 - 7

3. Frame openings with vertical E studs at jambs, horizontal J runner at head and sill.

F. Elevator Shafts:

1. Frame elevator door frames with 0.87 mm (0.0341-inch) thick J strut or J stud jambs having 75 mm (three-inch) long legs on the shaft side.

2. Protrusions including fasteners other than flange of shaft wall framing system or offsets from vertical alignments more than 3 mm

(1/8-inch) are not permitted unless shown.

3. Align shaft walls for plumb vertical flush alignment from top to bottom of shaft.

3.6 INSTALLING FURRED AND SUSPENDED CEILINGS OR SOFFITS

A. Install furred and suspended ceilings or soffits in accordance with ASTM

C754 or ASTM C841 except as otherwise specified or shown for screw attached gypsum board ceilings.

1. Space framing at 600 mm (24-inch) centers for gypsum board anchorage.

B. New exposed concrete slabs:

1. Use metal inserts required for attachment and support of hangers or hanger wires with tied wire loops for embedding in concrete.

2. Furnish for installation under Division 3, CONCRETE.

3. Suspended ceilings under concrete rib construction shall have runner channels at right angles to ribs and be supported from ribs with hangers at ends and at 1200 mm (48-inch) maximum intervals along channels. Stagger hangers at alternate channels.

C. Concrete slabs on steel decking composite construction:

1. Use pull down tabs when available.

2. Use power activated fasteners when direct attachment to structural framing cannot be accomplished.

D. Where bar joists or beams are…