26-8703_Phase_1A_Sheet_C508.pdf
PDF 1 MB Posted
- Attached to
- Immokalee Sports Complex Phase 1A & 1B
- Solicitation number
- 26-8703
- Issued by
- Collier County, Florida
About this file
This is a utility details sheet for Phase 1A of the Immokalee Sports Complex project in Collier County, Florida, prepared by Stantec Consulting Services Inc. The drawing illustrates sewer connection details, fire hydrant specifications, and utility conduit installations required for the project site located at 505 Escambia Street, Immokalee, Florida 34142. The sheet provides technical specifications for sanitary sewer lateral installations with minimum slopes of 1.04 percent, 6-inch minimum PVC piping, granular backfill requirements of 30 to 48 inches of cover, and electronic marker placements. The document includes detailed schematics for sewer connection depths both less than and greater than 8 feet, water main connections with fire hydrant installations, and utility conduit placements under pool deck areas. The drawing was digitally signed and sealed by Michelle Kelly, P.E., with final revisions dated November 5, 2026, and is designated as Sheet C508 within the construction documentation package.
The sheet establishes strict installation requirements including Kennedy K81D fire hydrant specifications with breakaway flanges, MJ retainer glands for thrust restraint, concrete thrust blocks with cement bags, and NSF Standard 61 compliance for all drinking water contact components. Utility specifications mandate coordination with the aquatics consultant and fire district, verification of utility locations and depths at connection points, and adherence to Collier County approved product lists. The document includes notes requiring contractors to verify locations with aquatic plans, coordinate with other consultants, and comply with preliminary utility inspections. All fire hydrants designated for transfer to Immokalee Water and Sewer District must be painted yellow, while private hydrants remain red, and all installations require bollard protection with UV-resistant sleeves.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Project No.:
Scale:
Revision:
Drawing No.
Sheet:
Title
C lie nt /P ro je ct
Permit/Seal
Dsgn. Chkd. YYYY.MM.DDDwn.
Th e
C on tra ct or sh al l v er ify a nd b e re sp on sib le fo r a ll d im en sio ns
. D O
N O
T s ca le th e dr aw in g
- a ny e rro rs or o m iss io ns sh al l b e re po rte d to S ta nt ec w ith ou t d el ay
Th e
C op yr ig ht s t o al l d es ig ns a nd d ra w in gs a re th e pr op er ty o f S ta nt ec
. R ep ro du ct io n or u se fo r a ny p ur po se o th er th an th at a ut ho riz ed b y St an te c is fo rb id de n.
of
File Name: 22-215617053-C507
ORIGINAL SHEET - ARCH D
us
-p pf ss
\s ha re d_ pr oj ec ts\
4\ ci vil \0
2_ dr aw in gs \a rc hi ve \2
5_ ph 1a
_f in al _r ev
\2 2-
3-c5
.1
1.
:0
8:
P M
Iss ue d By
Ap pd
YY
YY
.M M
.D D
Re vis io n
By Ap pd
YY
YY
.M
M .D
D
Te l:
w w w .st an te c.
co m
St an te c
C on su ltin g Se rv ic es In c.
K ra ft
Ro ad
S ui te
Na pl es
F L 3
-2
(2
) 6
-4
A
B
C
D
1 2 3 4 5
C ol lie r C ou nt y Bo ar d of C ou nt y C om m iss io ne rs, C ol lie r C ou nt y Pa rk s a nd R ec re at io n
Im m ok al ee S po rts
C om pl ex
Ph as e
1A
Es ca m bi a St re et
, I m m ok al ee
, F L 3
-3
215617854
2025.10.17 m ru fa tt
N ov em be r 2
:0
8p m
\\u s0
6-pp fs s0 1\ sh ar ed _p ro je ct s\
4\ ci vi l\0
2_ dr aw in gs \A rc hi ve \2
5_ ph 1a
_f in al _r ev
\2 2-
3- C
7.
dw g
L ay ou t =
C
Ph as e
1A S ub m itt al
0%
M K
JC
.0
9.
Ph as e
1A S ub m itt al
Fi na l)
M K
JC
.1
0.
Ph as e
1A S ub m itt al
F in al (R ev 1)M K
JC
.0
7.
AT
TE
N
TI
O
N
Th es e dr aw in gs m ay in cl ud e in fo rm at io n pr ov id ed b y ot he rs
. S ta nt ec h as n ot v er ifi ed th e ac cu ra cy a nd
/o r c om pl et en es s of th is in fo rm at io n an d sh al l n ot b e re sp on si bl e fo r an y er ro rs o r o m is si on s w hi ch m ay b e in co rp or at ed h er ei n as a re su lt.
C508
MK JCDP
M
K
JC
.0 7.
Re
-so lic ita tio n C om m en ts
M
R M
K
.1
1.
Bi dd er R es po ns es
UTILITY DETAILS
23 24
1' M
IN
3' M
IN
2' M
IN
1' MIN
1' MIN
AutoCAD SHX Text THIS ITEM HAS BEEN DIGITALLY SIGNED AND SEALED BY MICHELLE KELLY, P.E. ON THE DATE ADJACENT TO THE SEAL. PRINTED COPIES OF THIS DOCUMENT ARE NOT CONSIDERED SIGNED AND SEALED AND THE SIGNATURE MUST BE VERIFIED ON ANY ELECTRONIC COPIES.
AutoCAD SHX Text
FLOW
AutoCAD SHX Text 24"
AutoCAD SHX Text
REMOVABLE PVC THREADED PLUG
AutoCAD SHX Text
EASEMENT, PROPERTY OR RIGHT-OF-WAY LINE
AutoCAD SHX Text
TO BE LOWERED TO FINAL GRADE AT TIME OF PLUMBER'S TIE-IN
AutoCAD SHX Text
ELECTRONIC MARKER (SEE COUNTY APPROVED PRODUCT LIST, APPENDIX F)
AutoCAD SHX Text
ELBOW TO MAINTAIN COVER AND TRANSITION SLOPE
AutoCAD SHX Text
6" MINIMUM PVC SANITARY SEWER LATERAL OR AS OTHERWISE SHOWN
AutoCAD SHX Text
45° MAXIMUM
AutoCAD SHX Text
PIPE SHALL BE LAID ON UNDISTURBED SOIL
AutoCAD SHX Text
MINIMUM SLOPE 1.04% (1" PER 8 FT)
AutoCAD SHX Text
PROVIDE 30" TO 48" OF COVER TO BE HAND OR MECHANICALLY TAMPED GRANULAR BACKFILL
AutoCAD SHX Text
FLOW
AutoCAD SHX Text 24"
AutoCAD SHX Text
REMOVABLE PVC THREADED PLUG
AutoCAD SHX Text
EASEMENT, PROPERTY OR RIGHT-OF-WAY LINE
AutoCAD SHX Text
MINIMUM SLOPE 1.04% (1" PER 8 FT)
AutoCAD SHX Text
NTS
AutoCAD SHX Text
LENGTH OF SERVICE VARIES
AutoCAD SHX Text ±2'
AutoCAD SHX Text ±2'
AutoCAD SHX Text
LENGTH OF SERVICE VARIES
AutoCAD SHX Text 3" - 12"
AutoCAD SHX Text
SEWER CONNECTION DETAILS PROPERTY, RIGHT-OF-WAY OR EASEMENT LINE
AutoCAD SHX Text
SECTION DEPTH 8' AND OVER
AutoCAD SHX Text
SECTION DEPTH LESS THAN 8'
AutoCAD SHX Text
WW-10
AutoCAD SHX Text
REVISED: MAY 2009
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
6" MINIMUM PVC SANITARY SEWER LATERAL OR AS OTHERWISE SHOWN
AutoCAD SHX Text
TO BE LOWERED TO FINAL GRADE AT TIME OF PLUMBER'S TIE-IN
AutoCAD SHX Text
AT PRELIMINARY UTILITY INSPECTION
AutoCAD SHX Text
AT PRELIMINARY UTILITY INSPECTION
AutoCAD SHX Text 3" - 12"
AutoCAD SHX Text
NOTE: AT TIME OF PLUMBER'S TIE-IN, ADD CONCRETE COLLAR AS PER DETAIL WW-12.
AutoCAD SHX Text
ELECTRONIC MARKER (SEE COUNTY APPROVED PRODUCT LIST, APPENDIX F)
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
PVC CAP
AutoCAD SHX Text
REINFORCED CONCRETE (SEE DETAIL)
AutoCAD SHX Text N.T.S.
AutoCAD SHX Text
TYPICAL SLEEVE DETAIL
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
1. DETAIL DRAWING IS A DIAGRAMMATICAL ONLY AND DETAIL DRAWING IS A DIAGRAMMATICAL ONLY AND REPRESENTS THE GENERAL SCOPE OF WORK. 2. VERIFY LOCATION AND DEPTH OF UTILITIES AT POINTS OF VERIFY LOCATION AND DEPTH OF UTILITIES AT POINTS OF CONNECTION AND CORM WITH AQUATICS CONSULTANT PRIOR TO START OF INSTALLATION. 3. REFER TO AQUATIC PLANS FOR EXACT LOCATION OF POINTS REFER TO AQUATIC PLANS FOR EXACT LOCATION OF POINTS OF CONNECTION. 4. COORDINATE WORK WITH OTHER CONSULTANTS COORDINATE WORK WITH OTHER CONSULTANTS ACCORDINGLY.
AutoCAD SHX Text
18" MIN. 90° SWEEP
AutoCAD SHX Text
18" MIN. 90° SWEEP
AutoCAD SHX Text
PVC CAP
AutoCAD SHX Text
2" PVC CONDUIT
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text
%%USECTION A-A
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
(4) 2" PVC CONDUITS (UNDER POOL DECK)
AutoCAD SHX Text
WATER MAIN
AutoCAD SHX Text
CURB, GUTTER, OR EDGE OF PAVEMENT
AutoCAD SHX Text
COORDINATE WITH THE FIRE DISTRICT FOR COLOR
AutoCAD SHX Text
SUPPLY WITHOUT DRAIN OR PLUG DRAIN OPENING BEFORE INSTALLATION
AutoCAD SHX Text 6" THICK x 24" SQUARE CONCRETE BREAK SLAB WITH #4 BARS AS REQUIRED
AutoCAD SHX Text
MJ RETAINER GLANDS (TYP)
AutoCAD SHX Text
DR 18 PVC PIPE (C-900 DR 14 PVC PIPE IN PAVED AREAS)
AutoCAD SHX Text
HYDRANT TEE OR HOT TAP
AutoCAD SHX Text
TRAFFIC BREAKAWAY FLANGE
AutoCAD SHX Text
RIGHT-OF-WAY LINE OR SIDEWALK
AutoCAD SHX Text TWO PIECE CAST IRON VALVE BOX WITH DR 18 PVC PIPE EXTENSION IF NEEDED (C-900 DR 14 PVC PIPE IN PAVED AREAS). VALVE BOX OR PIPE SHALL NOT BEAR ON VALVE OR WATER MAIN
AutoCAD SHX Text 18" x 18" x 6" CONCRETE COLLAR
AutoCAD SHX Text
SEE PLANS
AutoCAD SHX Text
VARIES
AutoCAD SHX Text
2'-0" MINIMUM RADIUS
AutoCAD SHX Text
MIN. 18", MAX. 22"
AutoCAD SHX Text 6"
AutoCAD SHX Text 30"
AutoCAD SHX Text 6"
AutoCAD SHX Text NOTES: 1. FIRE HYDRANTS SHALL BE KENNEDY K81D. FIRE HYDRANTS SHALL BE KENNEDY K81D. 2. HYDRANT MUST BE CURRENT YEAR MANUFACTURE AND YEAR OF MANUFACTURE MUST BE CAST ON HYDRANT MUST BE CURRENT YEAR MANUFACTURE AND YEAR OF MANUFACTURE MUST BE CAST ON BARREL. 3. HOT TAPS MUST BE A MINIMUM OF ONE SIZE SMALLER THAN THE EXISTING PIPE. HOT TAPS MUST BE A MINIMUM OF ONE SIZE SMALLER THAN THE EXISTING PIPE. 4. TAPPING SADDLES MAY BE EITHER STAINLESS STEEL OR DUCTILE IRON. ALL TAPPING SADDLES FOR TAPPING SADDLES MAY BE EITHER STAINLESS STEEL OR DUCTILE IRON. ALL TAPPING SADDLES FOR ASBESTOS CEMENT PIPE SHALL BE STAINLESS STEEL. 5. ALL FIRE HYDRANT BARRELS SHALL BE A MINIMUM 5-1/4" IN DIAMETER. ALL FIRE HYDRANT BARRELS SHALL BE A MINIMUM 5-1/4" IN DIAMETER. 6. ALL FIRE HYDRANTS INSTALLED SHALL BE OF THE BREAK AWAY FLANGE TYPE AND SHALL MEET THE ALL FIRE HYDRANTS INSTALLED SHALL BE OF THE BREAK AWAY FLANGE TYPE AND SHALL MEET THE REQUIREMENTS OF THE LOCAL FIRE CONTROL DISTRICT. 7. HYDRANT SHALL CONFORM WITH AWWA C-502. HYDRANT SHALL CONFORM WITH AWWA C-502. 8. THRUST RESTRAINT SHALL BE BY MJ RETAINER GLANDS. THRUST RESTRAINT SHALL BE BY MJ RETAINER GLANDS. 9. PROVIDE A THRUST BLOCK AT HYDRANT BASE, SEE DETAIL ABOVE. EQUIVALENT VOLUME OF CEMENT PROVIDE A THRUST BLOCK AT HYDRANT BASE, SEE DETAIL ABOVE. EQUIVALENT VOLUME OF CEMENT BAGS MAY BE USED WITH PRIOR APPROVAL FROM IWSD. 10. ALL COMPONENTS THAT COME INTO CONTACT WITH DRINKING WATER SHALL CONFORM TO NSF ALL COMPONENTS THAT COME INTO CONTACT WITH DRINKING WATER SHALL CONFORM TO NSF STANDARD 61. 11. ANY HYDRANTS THAT ARE TO BE TURNED OVER TO IWSD ARE TO BE PAINTED YELLOW. ANY HYDRANTS ANY HYDRANTS THAT ARE TO BE TURNED OVER TO IWSD ARE TO BE PAINTED YELLOW. ANY HYDRANTS THAT ARE TO REMAIN PRIVATE SHALL BE PAINTED RED. 12. FIRE HYDRANTS SHALL BE PROTECTED BY BOLLARDS WITH UV RESISTANT SLEEVES.FIRE HYDRANTS SHALL BE PROTECTED BY BOLLARDS WITH UV RESISTANT SLEEVES.
AutoCAD SHX Text
NTS
AutoCAD SHX Text
IWSD FIRE HYDRANT DETAIL
AutoCAD SHX Text W-3
AutoCAD SHX Text
SHEET NO.
AutoCAD SHX Text
JULY 2018
AutoCAD SHX Text
REVISION DATE:
AutoCAD SHX Text
12'-0" MAX.
AutoCAD SHX Text
APRIL 2023
AutoCAD SHX Text
UNDISTURBED EARTH
AutoCAD SHX Text
THRUST BLOCK SECTION A-A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text
THRUST BLOCK
AutoCAD SHX Text
PER NFPA 1 SECTION 18.5.1.6
AutoCAD SHX Text
TWO 80 POUND BAGS OF CEMENT (INTACT AND UNMIXED)
AutoCAD SHX Text
| Sheets and Views |
| C508 |
| 2026-11-05T17:43:31-0500 | |
| Michelle Kelly |
File details come from the government source that posted it. Updated .