10 H 03 CD Waste Mgmt Plan.xlsx

Waste Diversion Report

Project Waste Management Plan : split report into 2? anticipated and actual?

Rate

mailto:christopher.cahoon@gsa.gov Instructions

-- Material: Typical construction debris types are listed in the column labeled “Material”. If you have a significant quantity of a material that is not listed, use “Other Debris” and specify material. Hazardous materials are exempt from diversion.

-- Anticipated Diversion: Insert an X under the appropriate column (“Reuse”, “Recycle”, or “Compost”) depending on how you plan on diverting the type of debris listed. For example, sheetrock scrap can be broken down and reused as a soil amendment on-site, in which case you would enter an X for compost. More than one use can apply. If the material listed is not a debris type on your site, enter an NA

-- Estimated % of Each Material Diverted: Estimate the percent of the total of each material type that you plan to divert. For example, under Brick, Masonry and Tile, you may have brick that you plan to reuse on-site, but need to dispose of old tile flooring and mortar bed. If you estimated brick as half of the combined total of the material type Brick, Masonry and Tile, then you would enter “50%” in the estimated per centage in the Waste column.

-- Vendor/Facility: Enter the anticipated vendor or facility that will be receiving your diverted debris. If you are reusing a material on-site, enter “on-site”. To find vendors that recycle specific C&D materials as well as processing facilities that accept mixed C&D materials consult the local state vendor directoy lists.

-- Anticipated Waste: Enter an X under “Landfill” for materials to be landfilled even if only a portion of the material will be landfilled.

-- Estimated % of Landfill Material: Estimate the percent of the total of each material type that you plan to landfill.

-- Diverted Pounds: Enter the total number of pounds for the material category actually diverted. This should include the weight of the specific material type reused, recycled, and composted. Conversion tables below can be used to estimate weight if receipts are in cubic yards.

-- Vendor/Facility: Enter the actual vendor or facility that received your diverted debris. If more than one vendor is used, enter both. If you are reusing a material on-site, enter “on-site”. Save receipts from each vendor.

-- Actual Waste not diverted: .Enter the total number of pounds for the material category not diverted.

-- Vendor/Facility: Enter the actual vendor or facility that received your diverted debris. If more than one vendor is used, enter both. If you are reusing a material on-site, enter “on-site”. Save vendor receipts.

-- Actual Waste: No more than 50% of the combined total of materials of construction waste should be sent to landfill.

-- Total Diverted + Landfilled lbs

-- Diversion Rate: At the bottom of column K, enter the sum of the diverted items. In Column N enter the sum of the waste items. Divide the total amount diverted (K) by the total debris (K+N) and multiply by 100 to get your diversion percentage. (K/(K+N))x100=diversion%

-- Reuse List: Fill out as noted.