60mm, 81mm, 120mm Mortar Propelling Charges
Closed Special Notice Posted
- Solicitation number
- W52P1J-16-R-0134
- Agency
-
Joint Munitions Command
Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- W52P1J18D0059 Federal IDV award
- NAICS code
- 332993 Ammunition (except Small Arms) Manufacturing
Notice details come from SAM.gov. Updated .
Notice text
7 versions
Update #7 · Latest ·
Amendment 0001 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (Posted June 20, 2017).
Amendment 0002 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received (Posted June 29, 2017).
Amendment 0003 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received, modify verbiage in Sections A, L and M, and extend the closing date (Posted July 11, 2017).
Amendment 0004 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (Posted July 20, 2017).
Amendment 0005 to Solicitation W52P1J-16-R-0134 has been issued to provide the 60/81/120mm Mortar Propelling Charge quantities associated with the Minimum Guaranteed Amount and the corresponding Delivery Orders to be issued concurrently with the base contract awards (Posted February 16, 2018).
Update #6 ·
Amendment 0001 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (Posted June 20, 2017).
Amendment 0002 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received (Posted June 29, 2017).
Amendment 0003 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received, modify verbiage in Sections A, L and M, and extend the closing date (Posted July 11, 2017).
Amendment 0004 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (Posted July 20, 2017).
Update #5 ·
Amendment 0001 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (Posted June 20, 2017).
Amendment 0002 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received (Posted June 29, 2017).
Amendment 0003 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received, modify verbiage in Sections A, L and M, and extend the closing date (Posted July 11, 2017).
Update #4 ·
Amendment 0001 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date (June 20, 2017).
Amendment 0002 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received (June 29, 2017).
Update #3 ·
Amendment 0001 to Solicitation W52P1J-16-R-0134 has been issued to answer questions received and extend the closing date.
Update #2 ·
Solicitation W52P1J-16-R-0134 is being released May 17, 2017 and will close June 30, 2017.
Update #1 ·
The U.S. Army Contracting Command-Rock Island (ACC-RI),Rock Island Arsenal, Rock Island, Illinois, on behalf of the Office of the Project Manager Combat Ammunition Systems (PM CAS) located at Picatinny Arsenal, New Jersey anticipates awarding two (2) or more Firm-Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contracts with five (5) 12-month ordering periods for the 60mm (M204, M235, and M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges to companies who are within the National Technology Industrial Base (NTIB). Two (2) or more awards will be made utilizing Lowest Price Technically Acceptable (LPTA) Source Selection Procedures in accordance with FAR 15.101-2.
The 60mm (M204, M235, and M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges are horseshoe shaped nitrocellulose (NC) containers that house the main charge propellant. The containers are molded as two separate halves that are eventually bonded together. The top half of the container has a loading hole to load the propellant prior to sealing the container with a closure tab. Once assembled, the propelling charge (maximum of four charges per mortar cartridge) is placed over the mortar fin assembly. When the ignition train is initiated, the hot gases generated inside the fin flash through the holes of the fin; therefore, igniting the propelling charges. The burning of the NC container and propellant produces enough gas pressure to force the mortar cartridge out of the tube and down range. The 60mm (M204, M235, and M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges use similar production materials and the same production processes. These Propelling Charges will be provided as Government Furnished Material (GFM) to the relevant Mortar Cartridge Load, Assemble and Pack (LAP) facilities for the production of High Explosive (HE), Smoke, Illumination, and Full Range Practice Cartridges (FRPC).
In order to receive an award, a successful offeror must have the capability to produce all of the 60mm (M204, M235, M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges. Offers that do not have the capability to produce all configurations of the 60mm, 81mm, and 120mm Propelling Charges, will not be considered for an award on this acquisition.
The maximum contract value will be $511,226,923 with a guaranteed minimum of $2,500 for each awarded contract. For planning purposes only, the estimated dollar amounts for each Mortar Propelling Charge variant is as follows:
$2,200,798 60mm M204; NSN: 1310-01-050-8896
$251,646,018 60mm M235; NSN: 1310-01-568-3208
$4,919,657 60mm M236; NSN: 1310-01-566-7489
$7,654,840 81mm M218; NSN: 1315-01-290-1598
$11,059,755 81mm M219; NSN: 1315-01-290-1597
$113,473,110 81mm M220; NSN: 1315-01-329-2575 and
$120,272,745 120mm M234A1; NSN: 1315-01-599-5779
The associated North American Industry Classification System Code (NAICS) for the 60mm (M204, M235, and M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges is 332993.
The 60mm (M204, M235, and M236), 81mm (M218, M219, M220), and 120mm (M234A1) Mortar Propelling Charges will be built to certified Government Technical Data Packages (TDPs), which will be available upon request. The TDPs are coded as Distribution Statement D (authorized distribution of technical documents to the Department of Defense (DoD) and U.S. DoD Contractors only). Businesses are required to be certified by the Department of Defense, United States/Canada Joint Certification Office. If offerors want to become certified in order to receive the TDPs for this effort they must fill out a registration form at http://www.dlis.dla.mil/jcp. Clause 52.211-4502 of the RFP for this effort will identify the link for offerors to request explicit access in order to view the TDPs. Offerors must submit a copy of the certified registration from (DD form 2345), Military Critical Technical Data Agreement. Restricted technical data will not be forwarded to a contractor who has not been certified. TDPs will not be available until the RFP is released.
The Request for Proposal (RFP) W52P1J-16-R-0134 and any amendments will be available electronically in accordance with FAR 4.5 and 5.102 at the following internet address: http://www.fedbizopps.gov/ on or about 05/01/2017. Interested NTIB businesses are advised to periodically access the internet address in order to obtain any amendments which may be issued.
Contractors must be registered in the System for Award Management (SAM) database by accessing the SAM web site at http://www.sam.gov in order to be eligible for contract award.
This notice does not constitute a formal RFP, nor is the U.S. Government obligated to issue an RFP. The point of contact for this requirement is Mr. George Lingris, george.r.lingris.civ@mail.mil, (309)782-3855, CCRC-AC, 3055 Rodman Ave. Building 60, 3rd Floor, Rock Island, IL 61299-6000.
Files
Show all 37
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity