Attachment_0031__MINIMUM_GUARANTEED_AMOUNT_FOR_60_81_120MM_MORTAR_PROPELLING_CHARGES.pdf

PDF 25 KB Posted

Attached to
60mm, 81mm, 120mm Mortar Propelling Charges
Solicitation number
W52P1J-16-R-0134
Issued by

About this file

Attachment 0031 MINIMUM GUARANTEED AMOUNT FOR 60 81 120MM MORTAR PROPELLING CHARGES

View the file

Other files

File Type Posted
Attachment_0032__SCHEDULE.pdf PDF
Solicitation_W52P1J-16-R-0134_Amendment_0005.pdf PDF
RFP_W52P1J-16-R-0134_Amendment_0004.pdf PDF
RFP_W52P1J-16-R-0134_Amendment_0003.pdf PDF
RFP_W52P1J-16-R-0134_Amendment_0002.pdf PDF
RFP_W52P1J-16-R-0134_Amendment_0001.pdf PDF
Attachment_0020__52.246-4520_DRAWING_NUMBER_LISTING.PDF PDF
Attachment_0019__52.246-4520_END_ITEM_COMPONENT_LISTING.PDF PDF
Attachment_0020__52.246-4520_DRAWING_NUMBER_LISTING.PDF PDF
Attachment_0019__52.246-4520_END_ITEM_COMPONENT_LISTING.PDF PDF
Request_for_Proposal_(RFP)_W52P1J-16-R-0134_Amendment_0001.pdf PDF
Attachment_0001__PRICE_MATRIX.xlsx XLSX spreadsheet
Attachment_0011__ASC_FORM_715-7_-_HAZARDOUS_MATERIAL_FORM.pdf PDF
Attachment_0021__RECOMMENDATION_FOR_CHARGE_ESTABLISHMENT_&_UNIFORMITY_CALCULATIONS.pdf PDF
Attachment_0008__DD1695_-_NOTICE_OF_REVISION_(NOR).pdf PDF
Attachment_0017__SECURITY_STATEMENT_OF_WORK_-_PHYSICAL_SECURITY_STANDARDS_FOR_DOD_SECURITY_RISK_CATEGORY_III_IV_AMMUNITION_AND_EXPLOSIVES_(A&E)_AT_COCO_FACILITIES.pdf PDF
Attachment_0013__GUIDANCE_ON_DOCUMENTATION_OF_CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL).pdf PDF
Attachment_0012__INSTRUCTIONS_FOR_COMPLETING_FORM_1423.pdf PDF
Attachment_0005__ADDRESS_LIST.pdf PDF
Attachment_0020__52.246-4520_DRAWING_NUMBER_LISTING.pdf PDF
Exhibit_F__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_81MM_M220_PROPELLING_CHARGE.pdf PDF
Attachment_0009__U.S._GOVERNMENT_POINT_OF_CONTACT_LISTING.pdf PDF
Attachment_0003__OPSEC_AQUISITION_PLAN.pdf PDF
Exhibit_G__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_120MM_M234A1_PROPELLING_CHARGE.pdf PDF
Exhibit_E__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_81MM_M219_PROPELLING_CHARGE.pdf PDF
Attachment_0019__52.246-4520_END_ITEM_COMPONENT_LISTING.pdf PDF
RFP_W52P1J-16-R-0134.pdf PDF
Exhibit_B__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_60MM_M235_PROPELLING_CHARGE.pdf PDF
Exhibit_D__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_81MM_M218_PROPELLING_CHARGE.pdf PDF
Attachment_0007__DD1694_-_REQUEST_FOR_VARIANCE_(RFV).pdf PDF
Attachment_0018__STATEMENT_OF_WORK_FOR_INERT_PROPELLING_CHARGES.pdf PDF
Attachment_0002__PAST_PERFORMANCE_QUESTIONNAIRE.docx DOCX document
Attachment_0010__STATISTICAL_PROCESS_CONTROL_(SPC)_TABLES.pdf PDF
Attachment_0006__DD1692_-_ENGINEERING_CHANGE_PROPOSAL_(ECP).pdf PDF
Exhibit_C__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_60MM_M236_PROPELLING_CHARGE.pdf PDF
Exhibit_A__CONTRACT_DATA_REQUIREMENTS_LIST_(CDRL)_-_60MM_M204_PROPELLING_CHARGE.pdf PDF
Show all 36

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ATTACHMENT 0031

SOLICITATION W52P1J-16-R-0134 AMENDMENT 0005; 60mm / 81mm / 120mm Propelling Charges

Minimum Guaranteed Amount (MGA)

AWARD 1

747,347 each 60mm M235 Propelling Charges 57,680 each 60mm M236 Propelling Charges

AWARD 2

361,176 each 81mm M220 Propelling Charges 837,472 each 120mm M234A1 Propelling Charges

AWARD 3

10 each 60mm Propelling Charge Complete Inert Models

• Refer to Amendment 0005 Section A Paragraph 2.c. for details

The U.S. Government intends to issue the above Award 1 and Award 2 MGA to the two offerors who are determined to be technically acceptable and provide the lowest and second lowest price. The evaluation factors utilized will be schedule and price.

Schedule will be evaluated on a go/no-go basis. To receive an award, an offeror must obtain a “go” rating under the Schedule factor, indicating that the offeror can meet the required delivery schedule. Each offeror who receives a “go” will receive an associated adjectival risk rating.

Awards will be made to the offerors with the lowest total evaluated prices that have obtained a “go” rating.

The offeror that is determined technically acceptable and has the lowest price will receive the “Award 2” quantity outlined in in the table below. The offeror that is determined technically acceptable and has the second lowest price will receive the “Award 1” quantity outlined in the table below.

It is anticipated that First Article Tests (FATs) will be required. However, the U.S. Government reserves the right to waive the FAT should you request a waiver and be determined eligible for such waiver.

The terms of this delivery order are as follows:

SCHEDULE

See Attachment 0032 for the detailed delivery schedule.

Delivery Point: Origin

Please provide a detailed schedule of the quantities to be produced per shift, and a narrative describing how your company will meet the required delivery schedule. This information will be evaluated on a go/no-go basis to determine whether the offeror can meet the required delivery schedule. Offerors determined unable to meet the schedule will not be considered for award of this requirement.

For each offeror assigned a “GO” rating; the U.S. Government will conduct a risk assessment to address the uncertainty associated with the proposed delivery schedule being met. The risk assessment will consider both the probability of missing an expected delivery date and the impact of missing an expected delivery date. The risk assessment, in conjunction with the information provided by the offeror, will consider if the proposed delivery schedule is realistic and consistent with its current product capacity. The following adjectival ratings will be used for evaluating Delivery Schedule risk:

Low: Has little potential to cause disruption of schedule, increased cost or degradation of performance. Normal contractor effort and normal U.S. Government monitoring will likely be able to overcome any difficulties.

Moderate: Can potentially cause disruption of schedule, increased cost or degradation of performance. Special contractor emphasis and close U.S. Government monitoring will likely be able to overcome difficulties.

High: Is likely to cause significant disruption of schedule, increased cost or degradation of performance. Is unlikely to overcome any difficulties, even with special contractor emphasis and close U.S. Government monitoring.

PRICE

Request that you fill in the following table with your price.

MULTIPLE AWARD EVALUATED PRICE

AWARD 1

ITEM QUANTITY UNIT PRICE

60mm M235 Propelling Charge FAT

60mm M235 Propelling Charges

747,347

60mm M236 Propelling

57,680

AWARD 2

ITEM QUANTITY UNIT PRICE

81mm M220 Propelling Charge FAT

81mm M220 Propelling Charges

361,176

120mm M234A1 Propelling Charge FAT

120mm M234A1 Propelling

837,472

All Government Furnished Property and transportation evaluation factors contained in Solicitation W52P1J-16-R-0134 are applicable to this requirement and its evaluation.

SCHEDULE

File details come from the government source that posted it.