B08-RFP_Atch4_BidSchedule_CLIN0002_20250904.xlsx

Introduction Pricing Submission Form

1. Summary Summary

SIGNATURE

&"Arial,Regular"&8Revised June 23, 2017 &"Arial,Regular"&8Page 1 of 4 &"Arial,Regular"&8CPD Form 01 26 00-c

&"Arial,Regular"&8Revised 06/23/2017 &"Arial,Regular"&8Page 1 of 4 &"Arial,Regular"&8CPD Form 01 26 00-c

&"Arial,Regular"&8Page 1 of 5

2. Prime Breakdown Prime Cost Breakdown

&"Arial,Regular"&8Page 2 of 5

3. Subcontractor Breakdown Subcontractor Cost Breakdown

&"Arial,Regular"&8Page 2 of 5

4. Profit Analysis Profit

b Relative difficulty of work. If the work is difficult and complex, the weight should be 0.12 and should be proportionately reduced to 0.03 on the simplest of jobs. This factor is tied, to some extent, to the degree of risk. Other things to consider are the nature of the work, by whom it is to be done (i.e., subcontractors, consultants), etc.

c Size of job. Work estimated up to $100,000 shall be weighted at 0.12. Work estimated between $100,000 and $5,000,000 shall be proportionately weighted from 0.12 to 0.05. Work from $5,000,000 to $10,000,000 shall be weighted at 0.04. Work in excess of $10,000,000 shall be weighted at 0.03. It should be noted that control of fixed expenses generally improves with increased job magnitude.

d Period of performance. Work not to exceed 1 month is to be weighted at 0.03. Durations between 1 and 24 months are to be proportionately weighted between 0.03 and 0.12. Work in excess of 24 months is to be weighted at 0.12.

e Contractor’s investment. To be weighted from 0.03 to 0.12 on the basis of below average, average and above average. Consider the amount of subcontracting, Government-furnished property or data, such as surveys, method of making progress payments, and any mobilization payment items.

f Assistance by government. To be weighted from 0.12 to 0.03 on the basis of average to above average. Consider use of Government-owned property, equipment and facilities, expediting assistance, etc.

g Subcontracting. To be weighted inversely proportional to the amount of subcontracting. Where 80 percent or more of the work is to be subcontracted, use 0.03. The weighting should be increased proportionately to 0.12 where all the work is performed by the contractor’s own forces.