Package_3_-_Thule_Consolidation_1_-_SID_ _CID.pdf

Thule Consolidation 1

Thule Air Base, Greenland

100% Submission

Comprehensive Interior Design Package

1 October 2015

Prepared By:

Jacobs/Ammann & Whitney

In Collaboration With:

US Army Corps of Engineers New York District

Comprehensive Interior Design Package

SECTION

Proj. No. FDWD5943

Table of Contents

1 STRUCTURAL INTERIOR DESIGN (SID)

1.1 SID Design Objectives

1.2 Interior Finish Boards

1.3 Interior Finish Cut Sheets

1.4 Finish Warranty Information

1.5 SID Documents

I-101 First Floor Finish Plan

I-102 Second Floor Finish Plan

I-103 First Floor Signage Plan

I-104 Second Floor Signage Plan

I-105 First Floor Window Treatment Plan

I-106 Second Floor Window Treatment Plan

I-201 Interior Elevations

I-202 Interior Elevations

I-203 Interior Elevations

I-401 Enlarged Finish Plans

I-501 Interior Details

I-601 Interior Finish Materials Schedule

I-602 Signage & Window Treatment Schedules

2 FURNITURE, FIXTURES, & EQUIPMENT (FF&E)

2.1 FF&E Design Objectives

2.2 FF&E Order Forms

Comprehensive Interior Design Package

2.3 Private Office & Workstation Typical Plans

2.4 Furniture Schedule

2.5 Alternate Manufacturer List

2.6 FF&E Procurement List

2.7 Points of Contact

2.8 FF&E Finish Boards

2.9 FF&E Cost Estimate

2.10 FF&E Bill of Materials (B.O.M.)

2.11 FF&E Warranty Information

2.12 Unicor Waiver

2.13 FF&E Documents

I-107 First Floor Furniture Plan

I-107-A First Floor Furniture Plan – Part A

I-107-C First Floor Furniture Plan – Part C

I-108 Second Floor Furniture Plan

I-108-C Second Floor Furniture Plan – Part C

I-108-D Second Floor Furniture & Panel Plan – Part D

I-109-A First Floor Power & Telecom Plan – Part A

I-109-C First Floor Power & Telecom Plan – Part C

I-110-C Second Floor Power & Telecom Plan – Part C

I-110-D Second Floor Power & Telecom Plan – Part D

I-402 Enlarged Furniture Plans

Comprehensive Interior Design Package

For additional information and questions please contact the Designer of Record:

Anita Bowman Jacobs 1100 North Glebe Road, Suite 500 Arlington, VA 22201 Phone: 571-218-1374 anita.bowman@jacobs.com

Comprehensive Interior Design Package

Structural Interior Design (SID)

1.1 SID Design Objectives

Design Objectives

SID DESIGN OBJECTIVES

The Thule Consolidated Shops and Supply Facility, Greenland will house the CE Maintenance Shops and the Base Supply area on level 1 and the Consolidate Administration space on the 2nd level. The building will reflect both user’s needs and functionality and will provide a comfortable yet durable facility in which to complete their operations.

The aesthetics of the Thule CE Shops building will provide an image of security, strength, professionalism and pride in country and community. The exterior materials will be a combination of metal panel and architectural concrete with steel doors and frames. The materials used will need to be durable, with low maintenance and an aesthetically pleasing appearance.

The image portrayed by the exterior of the Thule CE Shops building will be carried through to the inside of the building. The interior finishes will be simple, yet functional and durable. The colors will be neutral with gray tones and accents of red and blue.

The flooring finishes offer durability and safety while providing complementary accents that pull the remainder of the room finishes together. The floor on the first level will be sealed concrete, with porcelain tile in restrooms and vinyl composition tile in the office areas. Flooring for the second level will be mostly carpet and static dissipative rubber tile with a floor pattern that uses accent colors in the multi-purpose area. The carpet in the office areas and conference rooms will be a mixture of blue, red and green stripes with neutral undertones. The carpet will be a durable carpet tile for ease of replacement if necessary when stained or damaged. Vinyl Composition Tile (VCT), which is easily cleaned and maintained, will be used in areas like the level 1 offices, Sign Shop, Storage and 2nd level Printer rooms.

Wall colors will be painted a soothing neutral in the office and shop areas. Special spaces such as the Assembly Room, Break Room and Open Office East will have accent walls painted in complimentary colors of red and blue that will blend with the overall color palette yet add an extra point of interest to the space. The east wall of the conference room will be finished with an acrylic backed panel wall covering that can also be used as a tackable surface when needed for presentations.

The restrooms, locker and shower areas will be finished with a ceramic through-color porcelain tile that will provide the areas with a pleasing look and ease of cleaning.

The overall look and feel of the Thule CE Shops will be one the occupants will be proud of for many years to come.

Comprehensive Interior Design Package

1.2 Interior Finish Boards

Interior Finish Boards

Jacobs Engineer ing Group Inc .

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943 100% Submission 1 October 2015

ACT-1 SURFACE: CEILING

MATERIAL: ACOUSTICAL CEILING TILE

MANUFACTURER: ARMSTRONG

MODEL:

TILE: 1772 DUNE SQUARE LAY-IN, FOR USE WITH 15/16” GRID,

24" X 24" X 5/8” (610 X 610 X 16 MM)

COLOR: WHITE

REMARKS: EXPOSED METAL TEE TO MATCH ACT-1 COLOR.

CG-1 SURFACE: WALL

MATERIAL: CORNER GUARD WALL PROTECTION

MANUFACTURER: CS ACROVYN CO-8

MODEL: SM-10/20, 3" (76 MM) PROFILE

COLOR: STAINLESS STEEL

REMARKS:

CPT-1 SURFACE: FLOOR

MATERIAL: MODULAR CARPET TILE

MANUFACTURER: TANDUS

MODEL: LANDSCAPE COLOURS 03223, 24" X 24" (610 X 610 MM) MODULAR TILE

COLOR: 65008 ELECTROPLATED

REMARKS: INSTALLATION: HORIZONTAL ASHLAR

CT-1 SURFACE: FLOOR

MATERIAL: PORCELAIN TILE, COLORBODY

MANUFACTURER: DALTILE

MODEL:

IDENTITY, FABRIC FLOOR FIELD TILE, UNPOLISHED, 12" X 24"

(305 X 610 MM)

COLOR: MY20 PARAMOUNT WHITE

REMARKS:

GROUT: CUSTOM BUILDING PRODUCTS, POLYBLEND SANDED,

#381 BRIGHT WHITE. FIELD COLOR - RESTROOMS

FIELD COLOR – RESTROOMS

CT-2 SURFACE: WALL

MATERIAL: PORCELAIN TILE, GLAZED

MANUFACTURER: DALTILE

MODEL:

NEXT GALLERY, SLIMLITE WALL TILE, UNPOLISHED, 12" X 24"

(305 X 610 MM)

COLOR: J500 WHITE

REMARKS:

GROUT: CUSTOM BUILDING PRODUCTS, POLYBLEND UNSANDED,

#381 BRIGHT WHITE. FIELD COLOR - RESTROOMS

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943 100% Submission 1 October 2015

CT-3 SURFACE: WALL, ACCENT

MATERIAL: PORCELAIN TILE, GLAZED

MANUFACTURER: DALTILE

MODEL:

NEXT GALLERY, SLIMLITE WALL TILE, UNPOLISHED, 12" X 24"

(305 X 610 MM)

COLOR: J504 RED

REMARKS:

#381 BRIGHT WHITE. ACCENT COLOR - RESTROOMS

CT-4 SURFACE: WALL, ACCENT

MATERIAL: PORCELAIN TILE, GLAZED

MANUFACTURER: DALTILE

MODEL:

NEXT GALLERY, SLIMLITE WALL TILE, UNPOLISHED, 12" X 24"

(305 X 610 MM)

COLOR: J505 BLUE

REMARKS:

#381 BRIGHT WHITE. ACCENT COLOR - RESTROOMS

FG-1 SURFACE: FLOOR

MATERIAL: FOOT GRILLE

MANUFACTURER: MATS INC.

MODEL: ADVANCED TRACK FOOT GRILLES

COLOR: ALUMINUM WITH BOSTON KENMORE GREY INSERT

LK-1 SURFACE: LOCKERS

MATERIAL: POWDER COATED STEEL LOCKERS

MANUFACTURER: HADRIAN, INC.

MODEL: EMPEROR, SINGLE TIER, 12” X 72” (305 X 1829 MM)

COLOR: 535 LIGHT GREY

MBW-1 SURFACE: WALL

MATERIAL: DRY ERASE PROTECTION COVERING

MANUFACTURER: WOLF GORDON/EGAN WALL

MODEL:

EWP54, 100% WHITE POLYESTER, BACKING NON WOVEN

POLYCARBONATE LEXON, 54”H X 144”W (1372 X 3658 MM)

COLOR: WHITE

REMARKS: CONFERENCE ROOM – NORTH WALL

PLAM-1 SURFACE: WALL VERTICAL SURFACE

MATERIAL: POWDER COATED STEEL LOCKERS

MANUFACTURER: FORMICA

MODEL: 5882-58 MATTE

COLOR: CITADEL WARP

REMARKS: BREAK ROOM & COUNTER AREA MILLWORK

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943 100% Submission 1 October 2015

PT-1 SURFACE: WALL

MATERIAL: PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: EGGSHELL

COLOR: SW7005 PURE WHITE

PT-2 SURFACE: WALL

MATERIAL: PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: EGGSHELL

COLOR: SW7016 MINDFUL GRAY

REMARKS: CONFERENCE ROOM

PT-3 SURFACE: WALL, ACCENT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: EGGSHELL

COLOR: SW0057 CHINESE RED

REMARKS: ACCENT COLOR

PT-4 SURFACE: WALL, ACCENT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: EGGSHELL

COLOR: SW6966 BLUEBLOOD

REMARKS: ACCENT COLOR

PT-5 SURFACE: DOOR FRAME, TRIM, STAIR RAILINGS, STRINGERS

MANUFACTURER: SHERWIN WILLIAMS

MODEL: SEMI GLOSS

COLOR: SW7019 GAUNTLET GRAY

REMARKS: DOOR FRAMES, TRIM, STAIR RAILINGS - 1ST & 2ND FLOORS

PT-6 SURFACE: CEILING

MANUFACTURER: SHERWIN WILLIAMS

MODEL: FLAT

COLOR: SW7005 PURE WHITE

REMARKS: DOOR FRAME, TRIM, STAIR RAILINGS, ETC.

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943 100% Submission 1 October 2015

PT-7 SURFACE: DOOR FRAME, TRIM, STAIR RAILINGS, STRINGERS

MATERIAL: PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: SEMI GLOSS

COLOR: SW6966 BLUEBLOOD

REMARKS: DOOR FRAMES, TRIM, STAIR RAILINGS, STRINGERS - RESTROOMS

RB-1 SURFACE: BASE

MATERIAL: RUBBER BASE

MANUFACTURER: JOHNSONITE

MODEL: RUBBER TRADITIONAL WALL BASE, 4" (102 MM) HIGH, COVED PROFILE

COLOR: 48 GREY WG

REMARKS: STATIC DISSAPATIVE TILE

RT-1 SURFACE: FLOOR

MATERIAL: RUBBER TILE

MANUFACTURER: NORA

MODEL: NORAPLAN SENTICA ED, 24” X 24” (610 X 610 MM) TILE

COLOR: 6521 SUNDAY PAPER

RT-2 SURFACE: FLOOR

MATERIAL: RUBBER TILE

MANUFACTURER: NORA

MODEL: NORAPLAN SENTICA ED, 24” X 24” (610 X 610 MM) TILE

COLOR: 6530 WATERFALL

SC-1 SURFACE: FLOOR

MATERIAL: SEALED CONCRETE

MANUFACTURER: QC CONSTRUCTION PRODUCTS

MODEL: CEM-TINT CONCRETE STAIN, WITH CLEAR SEALER HC-166

COLOR: CLEAR SEALER

REMARKS:

CUSTOM COLOR TO MATCH BENJAMIN MOORE HC-166

BREWSTER GRAY

SF-1 SURFACE: FLOOR

MATERIAL: TERRAZZO

MANUFACTURER: FIAT

MODEL: MONTEREY SHOWER FLOOR

COLOR: 081 BLACK & WHITE

REMARKS: SHOWER PAN - SECOND FLOOR RESTROOM

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943 100% Submission 1 October 2015

SS-1 SURFACE: COUNTER TOP

MATERIAL: SOLID SURFACE, QUARTZ

MANUFACTURER: COSENTINO

MODEL: ECO

COLOR: POLAR CAP

REMARKS: BREAKROOM, RESTROOMS & COUNTER AREA

STN-1 SURFACE: DOOR

MATERIAL: SOLID SURFACE CORE WOOD DOOR

MANUFACTURER: TBD

MODEL: BEECHWOOD

COLOR: STAIN TO MATCH STEELCASE 3614 WARM OAK

REMARKS: REFER TO A-601

TWP-1 SURFACE: WALL

MATERIAL: TACKABLE WALL PANEL

MANUFACTURER: MAHARAM

MODEL: TEK-WALL SCATTER 399390, ACRYLIC BACKED, 54" (1372 MM) HIGH

COLOR: 004 VAPOR

REMARKS: 4'X8' (1219 X 2438) AT CONFERENCE ROOM

VCT-1 SURFACE: FLOOR

MATERIAL: VINYL COMPOSITION TILE

MANUFACTURER: JOHNSONITE

MODEL: AZROCK TEXTILE VCT, 12" X 24" (305 X 610 MM) PLANK

COLOR: V-280 RAW SILK

REMARKS: FIELD FLOOR - STORAGE, 1ST FLOOR OFFICES

WT-1 SURFACE: WINDOW TREATMENT

MATERIAL: HORIZONTAL MINI BLIND

MANUFACTURER: LEVOLOR

MODEL: R1V1C RIVIERA CONTRACT, 1" (25 MM) BLIND

COLOR: 116 POLAR BEAR

REMARKS: MOUNTED AT WALL SURFACE

WT-2 SURFACE: WINDOW TREATMENT

MATERIAL: BLACK OUT ROLLER SHADE

MANUFACTURER: MECHOSHADE

MODEL:

MANUALLY OPERATED ROLLER SCREEN, MECHOSHADE SLIMLINE

BRACKET SYSTEM, MIDNITE BLACKOUT 0200 SERIES SHADECLOTH

COLOR: 0202 ICE

REMARKS: CEILING MOUNTED INSIDE WINDOW FRAME

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

CPT-1

TANDUS

LANDSCAPE COLOURS 03223, 24" X 24" (610 X 610 MM) MODULAR

TILE

65008 ELECTROPLATED

3”x7” (76 X 178 MM)

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

PT-1 & PT-6

SHERWIN WILLIAMS

EGGSHELL & FLAT

SW7005 PURE WHITE

3”x3”

PT-1 & PT-6

PT-2

SHERWIN WILLIAMS

EGGSHELL

SW7016 MINDFUL

GRAY

2”x3”

PT-2

TWP-1 MAHARAM

TEK-WALL SCATTER

399390, ACRYLIC

BACKED, 54" (1372

MM) HIGH

004 VAPOR

2”x3”

TWP-1

PT-3

SHERWIN WILLIAMS

EGGSHELL

SW0057 CHINESE RED

2”x3”

PT-3

PT-4

SHERWIN WILLIAMS

EGGSHELL & FLAT

SW6966 BLUEBLOOD

2”x3”

PT-4 & PT-7

PT-5

SHERWIN WILLIAMS

SEMI GLOSS

SW7019 GAUNTLET

GRAY

2”x3”

PT-5

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

VCT-1

SC-1

RT-2 RT-1

RT-1

NORA

NORA PLAN SENTICA ED,

24" X 24" (610 X 610 MM) TILE

6521 SUNDAY PAPER

3”x3”

RT-2

NORA

NORA PLAN SENTICA ED,

24" X 24" TILE (610 X 610 MM)

6530 WATERFALL

3”x3”

RB-1

JOHNSONITE

RUBBER

TRADITIONAL

WALL BASE, 4"

(102 MM) HIGH,

COVED

PROFILE

48 GREY WG

2”x4”

RB-1

VCT-1

JOHNSONITE

AZROCK TEXTILE VCT,

12" X 24" (305 X 610 MM)

PLANK

V-280 RAW SILK

2”x2”

SC-1

QC

CONSTRUC.

PRODUCTS

HC-166

CUSTOM

COLOR TO

MATCH

BEN JAMIN

MOORE HC-

166, 2”x4”

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

SS-1

PLAM-1

WT-1 WT-2

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

CT-2

DALTILE

NEXT GALLERY, SLIMLITE WALL TILE,

POLISHED, 12" X 24" (305 X 610 MM)

J500 WHITE

4”X4”

CT-2

CT-1

DALTILE

IDENTITY, FABRIC FLOOR FIELD TILE,

POLISHED, 12" X 24" (305 X 610 MM)

MY20 PARAMOUNT WHITE

4”X4”

CT-1

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

CT-3

CT-4

CT-3

DALTILE

NEXT GALLERY, SLIMLITE WALL

TILE, POLISHED, 12" X 24" (305 X

610 MM)

J504 RED

4”X4”

CT-4

DALTILE

NEXT GALLERY, SLIMLITE WALL TILE,

POLISHED, 12" X 24"

J505 BLUE

4”X4”

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

LK-1

SF-1

SF-1

FIAT

TERRAZZO

081 BLACK & WHITE

4”x4”

CG-1

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

ACT-1

ARMSTRONG

TILE: 1772 DUNE SQUARE LAY-IN, FOR USE

WITH 15/16” GRID, 24" X 24" X 5/8”

WHITE

5.75”X5.75”

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

JFI Project No.: FDWD5943

FG-1

MATS INC.

ADVANCED TRACK FOOT

GRILLES

ALUMINUM WITH BOSTON

KENMORE GREY INSERT

3”x3”

Comprehensive Interior Design Package

1.3 Interior Finish Cut Sheets

Dune Tegular with Suprafine® 9/16" Exposed Tee grid

Dune Tegular with Interlude XL® 9/16"

Dimensional Tee grid

Dune Tegular with Silhouette® 9/16"

Bolt-Slot grid 1/4" Reveal

Dune with Prelude® XL® 15/16" Exposed Tee grid (Pg. 215);

Axiom® Classic Trim (Pg. 236)

Detail (Other Suspension Systems compatible. Refer to listing on page 156.)

time and scrap visible sag (excludes items 1796 and 1798), mold/mildew, and bacterial growth

Color

K e y S e l e c t i o n A t t r i b u t e s

™ Post-consumer Recycled Content options: Items 1774HRC, 1775HRC, 1776HRC, 1777HRC. 35% Pre-consumer;

18% Post-consumer

Scratch-resistant

T y p i c a l A p p l i c a t i o n s

TechLineSM 877 ARM155

Items 1772, 1773, 1774, 1775 & 177610-YEAR Availability

Square Lay-in & Tegular fine texture

Dune Dune Square Lay-in with Prelude 15/16"

Exposed Tee grid

Dune with Interlude® 9/16" Dimensional Tee grid (Pg. 211);

Axiom® Classic Trim (Pg. 236) millernl Text Box

V i s u a l S e l e c t i o n P e r f o r m a n c e S e l e c t i o n Dots represent highest level of performance.

Square Lay-in & Tegular fine texture

Acoustics Fire Light Sag Anti- Durable Recycle Edge Item Dimensions NRC CAC Rating Reflect Resist Microbial Program Profile No.

DUNE Square Lay-in

15/16" 1 1772 Square Lay-in 1772M

1 1850 1850M

1 1773 1773M

1 1851 1851M

1 1796 1796M

1 1798 1798M

P h y s i c a l D a t a

Material

Surface Finish

Fire Performance

™: A fire resistive ceiling when used in

ASTM E1264 Classification

Sag Resistance ® Plus – superior resistance to sagging in high humidity conditions up to, but not including, standing water and outdoor applications.

VOC/Formaldehyde Emissions Meets CA Dept. of Health Services Standard Practice for the testing of VOC Emissions and is listed on CHPS High Performance Products Database for Low-Emitting Materials.

Anti Mold/Mildew & Bacteria ® Plus contains an anti-microbial treatment and provides guaranteed resistance against growth of

Insulation Value

30-Year Performance Guarantee & Warranty Information

Weight; Square Feet/Carton

LEED® Credits Acoustics Low Emitting or CHPS

LEED for Schools

Recycled Content: Up to 53% armstrong.com/greengenie

Mgmt Content Materials Materials & Views

Location Dependent

DUNE Tegular

9/16" 31-34, 54 1775 Beveled Tegular 1775M

1775HRC 2' x 2' x 5/8"

31 1852

31-34, 54 1777 1777M

1777HRC 2' x 4' x 5/8"

15/16" 6 1774 Angled Tegular 1774M

1774HRC 2' x 2' x 5/8"

6 1853

6 1776 1776M

1776HRC 2' x 4' x 5/8"

35% Pre-consumer;

18% Post-consumer

The post-consumer recycled content of these items is from reclaimed ceilings

Item 1775-CAC 33 on 9/16" Interlude, Sonata, Suprafine

Suprafine XL

Suspension Systems

15/16" 9/16"

Prelude®

Prelude XL®

Interlude® Silhouette® Bolt-Slot

Sonata® Suprafine® ® Screw-Slot

M I

N E

R A

L

F I

B E

R

TechLine

SM / 1 877 ARM

armstrong.com/ceilings (search: dune)

CS-4351-611

LEED®

Grid Drawings Cat. pgs.

226-228 or armstrong.

com/catdwg

K e y S e l e c t i o n A t t r i b u t e s

• Seismic Rx® Suspension System saves time and money;

ICC-ES approach to installations

(ESR-1308)

• PeakForm® patented profile increases strength and stability for improved performance during installation

• SuperLock™2 main beam clip is engineered for a strong, secure connection and fast accurate alignment confirmed with an audible click; easy to remove and relocate

• Hot dipped galvanized coating inhibits red rusting better than electrogalvanized or painted systems

• Rotary-stitched during manufacture by a patented method for additional torsional strength and extra stability during installation

• XL2 staked-on stab end detail provides tight, secure locked connection; easy to remove, reuse and relocate

• State-of-the-art expansion relief on Fire Guard™ options;

provides greater strength and prohibits distortion of grid face during installation

• 10-year limited warranty;

30-year with HumiGuard® Plus

Ty p i c a l A p p l i c a t i o n s

• Retail

• Education

• Offices

• Hospitality

• Fire Guard applications based on building construction and local fire code requirements

P r o d u c t D e s c r i p t i o n

B. Components:

1. Main Beams: Double-web construction, web height 1-11/16″ with peaked roof top bulb and 15/16″ bottom flange with prefinished steel or aluminum capping*; one fire expansion relief per fire rated main beam.

* NOTE: Fire Guard items available in steel capping only.

2A. Cross Tee: Double-web construction, web height 1-11/16″, 15/16″ bottom flange with prefinished steel or aluminum capping and override at each end. Staked-on end detail allows easy cross tee removal and remounting.

2B. Cross Tee: Double-web construction, web height 1-1/2″, 15/16″ bottom flange with prefinished steel or aluminum capping and override at each end. Staked-on end detail allows easy cross tee removal and remounting.

2C. Cross Tee: Double-web construction, web height 1-3/8″, 15/16″ bottom flange with prefinished steel or aluminum capping and override at each end. Staked-on end detail allows easy cross tee removal and remounting.

2D. Cross Tee: Double-web construction, web height 1-3/16″, 15/16″ bottom flange with prefinished steel cap and override at each end. Staked-on end detail allows easy cross tee removal and remounting.

Wall Moldings:

3A. Angle molding: hemmed with prefinished exposed flanges

3B. Shadow molding: hemmed with prefinished exposed flanges

3C. Shadow Molding: (Compatible with Seismic Rx® and BERC 2)

3D. Channel molding: hemmed with prefinished exposed flanges

■■ 7300 (144″, routs 6″ OC, Intermediate-duty) ■■ 7301 (144″, routs 6″ OC, Heavy-duty) ■■ 7302 (120″, routs 6″ OC, Intermediate-duty) ■■ 7305 (140″, routs 10″ OC, Intermediate-duty) ■■ 734032 (3600mm, routs 150mm OC, Intermediate-duty) Fire Guard Items ■■ 8300 (144″, routs 6″ OC, Intermediate-duty) ■■ 8301 (144″, routs 6″ OC, Heavy-duty) ■■ 834033 (3600mm, routs 150mm OC, Intermediate-duty) ■■ Other

■■ XL7340 (48″, routs 12″ OC) ■■ XL7341 (48″, routs 12″ OC)

■■ XL7330 (36″)

■■ XL7380 (96″, routs 12″ OC) ■■ XL7357 (60″, routs 6″ OC) ■■ XL7358 (60″, routs 20″ OC) ■■ XL7390 (72″, routs 12″ OC) Fire Guard Items

■■ XL8320 (24″)

■■ XL8340 (48″, routs 12 ″ OC) ■■ XL8341 (48″, routs 12 ″ OC) ■■ 833033 (1200mm, routs 300mm OC) ■■ Other

■■ XL7342 (48″, routs 12″ OC)

■■ XL7318 (12″)

■■ XL7368 (20″)

■■ XL7328 (24″)

■■ XL7378 (30″)

■■ XL7348 (48″)

■■ 312451 (300mm, center rout) ■■ 312051 (600mm) ■■ 313051 (1200mm, center rout) Fire Guard Items

■■ XL8323 (24″)

■■ 832052 (600mm) ■■ Other

■■ XL7148 (48″, routs 12 ″ OC)

■■ XL7128 (24″)

Materials

A. General: ASTM C635 (Intermediate-duty) (Heavy-duty) main beam classification, commercial-quality hot dipped galvanized steel. Exposed surfaces chemically cleansed, galvanized steel or aluminum capping prefinished in baked polyester paint or annodized.

1/4" (6mm)

3/32" (2mm) 1-3/16"

(30mm)

15/16" (24mm)

1/4" (6mm)

1-3/8" (35mm)

15/16" (24mm)

1-11/16" (43mm)

9/16" (14mm)

1/4"

15/16" (24mm)

(6mm)

2C.

2D.

1/4" (6mm) 1/4" (6mm)

1-11/16" (43mm)

1-1/2" (38mm)

15/16" (24mm)

15/16" (24mm)

(A) (B) Item # Length Flange Height ■■ 7800 144″ 7/8″ 7/8″ ■■ 7807 120″ 2″ 1″ ■■ 7808 120″ 2″ 2″

■■ HD7801 120″ 7/8″ 7/8″

(A) (B) (C) Item # Length Flange Height Reveal ■■ 7875 120″ 3/4″ 15/16″ 1/2″

■■ 7877 120″ 15/16″ 15/16″ 1/4″ ■■ 7878 120″ 15/16″ 15/16″ 3/8″ ■■ 7897 120″ 15/16″ 15/16″ 1/2″

(A) (B) (C) Item # Length Flange Height Flange ■■ 7835 120″ 7/8″ 1-3/4″ 9/16″

B

A

B

A

C

A

B

C

15/16" Exposed Tee System

PRELUDE® XL®Recycled Content: 30%

C o l o r S e l e c t i o n

■■ WH - White ■■ CR - Cream ■■ HA - Haze ■■ VA - Vanilla†

■■ CM - Camel ■■ YS - Oyster†

■■ PL - Platinum ■■ AD - Adobe†

■■ AR - Brass ■■ AM - Mirror ■■ BL - Tech Black ■■ SG - Silver Grey ■■ MY - Gun Metal Grey

■■ ST - Slate ■■ WK - Wolf†

■■ WA - White Aluminum

■■ NA - Natural Aluminum

■■ SA - Silver Satin ■■ HDC - Hot Dipped

Clear Coat ■■ PW - Pewter†

■■ BZ - Bronze†

■■ SL - Silver†

† Only available on 7301, XL7342, XL7328, and 7800 NOTE: Color chips included with samples of Armstrong grid.

See your Armstrong representative for sample material.

NOTE: Items 7305, 7302, XL7340, XL7380, XL7357, XL7358, XL7128, XL7148, XL7348, XL7330, XL7318, XL7368, XL7378, XL7390, XL8320, XL8341, XL7341 are available in white only.

NOTE: 8300, XL8340 and XL8323 are available in white and black only.

3344 Prelude XL_610 7/9/10 3:26 PM Page 1

Material Hot dipped galvanized steel

Surface Finish Baked polyester paint or anodized

Face Dimension 15/16″

Profile Exposed tee

Cross Tee/Main Beam Interface Override

End Detail Main Beam: Staked-on clip XL Cross Tee: Staked-on clip

Duty Classification Intermediate or Heavy-duty

Main Beam Load Test Data

HANGER SPACING

MAIN WEB ASTM Lbs./LF. (Simple Span)**

BEAMS LENGTH HEIGHT CLASS 4′ 5′

7300 144″ 1-11/16″ Intermediate-duty 12.8 6.35 7301 144″ 1-11/16″ Heavy-duty 16.5 8.73

734032 144″ 1-11/16″ Intermediate-duty 12.8 6.35 8300/834033 144″ 1-11/16″ Intermediate-duty 12.8 6.35

8301 144″ 1-11/16″ Heavy-duty 16.5 8.73 7302 120″ 1-11/16″ Intermediate-duty 12.8 6.35 7305 140″ 1-11/16″ Intermediate-duty 12.8 6.35

Cross Tee Load Test Data

HANGER SPACING

CROSS WEB Lbs./LF. (Simple Span)**

TEES LENGTH HEIGHT 4′

XL7318/312451 12″ 1-3/8″ 40.45

XL7368 20″ 1-3/8″ 40.45

XL7128 24″ 1-3/16″ 33.0

XL7328/312051 24″ 1-3/8″ 40.45

XL8323/832052 24″ 1-3/8″ 40.45

XL8320 24″ 1-11/16″ 61.33

XL7378 30″ 1-3/8″ 16.54

XL7330 36″ 1-11/16″ 23.11

XL7148 48″ 1-3/16″ 6.0

XL8340/833033/ 48″ 1-11/16″ 12.25

XL7340

XL7341/XL8341 48″ 1-1/2″ 16.59

XL7342 48″ 1-1/2″ 9.00

XL7348/313051 48″ 1-3/8″ 8.31

XL7357 60″ 1-11/16″ 7.61

XL7358 60″ 1-11/16″ 7.61

XL7380 96″ 1-11/16″ 12.12

XL7390 72″ 1-11/16″ 12.23

Seismic Performance

MINIMUM LBS. TO PULL OUT

MAIN BEAMS COMPRESSION/TENSION

7300, 7302, 7305, 335.0 734032, 8300

7301, 8301 330.0

MINIMUM LBS. TO PULL OUT

CROSS TEES COMPRESSION/TENSION

All XL cross tees exceed 300 lbs. in both compression and tension.

ICC Reports For areas under ICC jurisdiction, see ICC evaluation report number 1308 for allowable values and/or conditions of use concerning the suspension system components listed on this page. The report is subject to reexamination, revisions and possible cancellation.

**To derive maximum lbs/SF, divide the on-center spacing of the component into the lbs/LF given in the load test data table.

P h y s i c a l D a t a M a x i m u m F i x t u r e W e i g h t

LIGHT FIXTURE

B. Cross Tee to Cross Tee

LIGHT FIXTURE

A. Main Beam to

Main Beam

Main Beam

Hanger Wire (•)

Main beams

Hanger Wire (•)

1. Fixture* 24″ x 48″ 24″ x 24″

2. Planning Module 48″ x 48″ 48″ x 48″

3. Hanger Spacing 48″ 48″

4. Item XL8340/XL7340 69.27 lbs. 80.55 lbs.

4. Item XL7342 40.89 lbs. 52.26 lbs.

5. Item XL8341/XL7341 81.67 lbs. 100.0 lbs.

1. Fixture* 24″ x 48″ 12″ x 48″

2. Planning Module 48″ x 48″ 48″ x 48″

3. Hanger Spacing 48″ 48″

4. Item XL8340/XL7340 49.27 lbs. 42.17 lbs.

5. Item XL8341/XL7341 72.32 lbs. 63.32 lbs.

*Fixtures weighing more than 56 lbs. should be independently supported. Fixture weight is based on single fixture only. For end-to-end fixtures or other configurations not shown, consult your Armstrong representative.

NOTE: The above data is based on 48″ hanger wire spacing, board weight of 1 lb./SF, maximum deflection of tees not to exceed 1/360 of the span, and suspension system installed in accordance with ASTM C636.

1. Fixture* 24″ x 48″ 24″ x 48″

2. Planning Module 48″ x 48″ 48″ x 48″

3. Hanger Spacing 48″ 48″

4. Item 7300/8300 69.27 lbs. 49.27 lbs.

Item 7301/8301 100.0 lbs. 72.32 lbs.

1. Fixture* 12″ x 48″ 12″ x 48″

2. Planning Module 48″ x 48″ 48″ x 48″

3. Hanger Spacing 48″ 48″

4. Item 7300/8300 54.26 lbs. 47.17 lbs.

Item 7301/8301 100.0 lbs. 63.32 lbs.

1. Fixture* 24″ x 48″ 20″ x 60″

2. Planning Module 60″ x 60″ 60″ x 60″

3. Hanger Spacing 48″ 48″

4. Item 7300/8300 56.47 lbs. 43.21 lbs.

Item 7301/8301 56.47 lbs. 65.46 lbs.

Main Beams tested as follows: 7300 tested at 13.0 lbs./LF to 1/360 of 4′ span; 7301 tested at 16.5 lbs./LF to 1/360 of 4′ span.

TechLineSM / 1 877 ARMSTRONG 1 877 276 7876 armstrong.com/ceilings

CS-3344-710

All trademarks used herein are the property of AWI Licensing Company and/or its affiliates

© 2010 AWI Licensing Company • Printed in the United States of America

15/16" Exposed Tee System

PRELUDE® XL®

3344 Prelude XL_610 7/9/10 3:26 PM Page 2

(800) 233-8493 • www.c-sgroup.com Page 1 - June 2010

SUGGESTED SPECIFICATIONS

SECTION 10 26 00

C/S Acrovyn® Model SCO-8

Part 1 - General

1.01 Summary

A. This section includes the following types of wall protection systems:

1. Corner Guards

B. Related sections: The following sections contain requirements related to this section:

1. Handrails, Bumper Guards, Crash Rails, Accent Rails, Wall Covering, Wall

Panels, Door Protection; refer to section 10 26 00 “Wall and Door Protection”

2. Blocking in walls for fasteners; refer to section 09 22 00 “Supports for Plaster and Gypsum Board”

1.02 References

A. American Society for Testing and Materials (ASTM)

1.03 Submittals

A. General: Submit the following in accordance with conditions of contract and Division 1 specification section 01 33 00 “Submittal Procedures”.

B. Product data and detailed specifications for each system component and installation accessory required, including installation methods for each type of substrate.

C. Shop drawings showing locations, extent and installation details of corner guards.

Show methods of attachment to adjoining construction.

D. Samples for verification purposes: Submit the following samples, as proposed for this work, for verification of guard.

1. 12" (304.8mm) long sample of each model specified.

E. Product test reports from a qualified independent testing laboratory showing compliance of each component with requirements indicated.

F. Maintenance data for wall protection system components for inclusion in the operating and maintenance manuals specified in Division 1.

1.04 Quality Assurance

A. Installer qualifications: Engage an installer who has no less than 3 years experience in installation of systems similar in complexity to those required for this project.

B. Manufacturer’s qualifications: Not less than 5 years experience in the production of specified products and a record of successful in-service performance.

C. Single source responsibility: Provide all components of the wall protection system manufactured by the same company to ensure compatibility of color, texture and physical properties.

1.05 Delivery, Storage and Handling

A. Deliver materials to the project site in unopened original factory packaging clearly labeled to show manufacturer.

B. Material must be stored flat.

1.06 Project Conditions

A. Installation areas must be enclosed and weatherproofed before installation commences.

millernl

CG-1

(800) 233-8493 • www.c-sgroup.com Page 2 - June 2010

Part 2 - Products

2.01 Manufacturers

A. Interior surface protection products specified herein and installed on the submittal drawings shall be manufactured by Construction Specialties, Inc.

2.02 Materials

A. Stainless steel: To be type 304 alloy with #4 satin finish.

B. All necessary fasteners to be supplied by the manufacturer.

2.03 Corner Guards

A. Stainless steel corner guards to be by Construction Specialties: Surface mounted guards to be 16 gauge stainless steel.

1. Model SCO-8 Stainless steel corner guard for end wall conditions mounted with construction adhesive standard; stainless steel screws optional. Specify required dimensions. Optional powder coat finish for stainless steel components available; select from one of (8) powder coat finishes.

2.04 Fabrication

A. General: Fabricate wall protection systems to comply with requirements indicated for design, dimensions, detail, finish and member sizes.

B. Preassemble components in shop as much as possible to minimize field assembly.

2.05 Finishes

A. General: Comply with NAAMM "Metal Finishes Manual" for recommendations relative to applications and designations of finishes.

Part 3 - Execution

3.01 Examination

A. Verification of conditions: Examine areas and conditions under which work is to be performed and identify conditions detrimental to proper or timely completion.

1. Do not proceed until unsatisfactory conditions have been corrected.

3.02 Preparation

A. Surface preparation: Prior to installation, clean substrate to remove dirt, debris and loose particles. Perform additional preparation procedures as required by manufacturer’s instructions.

B. Protection: Take all necessary steps to prevent damage to material during installation as required in manufacturer’s installation instructions.

3.03 Installation

A. Install the work of this section in strict accordance with the manufacturer’s recommendations, using only approved mounting hardware, and locating all components firmly into position, level and plumb.

3.04 Cleaning

A. General: Immediately upon completion of installation, clean material in accordance with manufacturer’s recommended cleaning method.

B. Remove surplus materials, rubbish and debris resulting from installation as work progresses and upon completion of work.

3.05 Protection

A. Protect installed materials to prevent damage by other trades. Use materials that may be easily removed without leaving residue or permanent stains.

LANDSCAPE COLOURS #03223

Product Specification Sheet

Face Construction Imperial Metric Construction Stratatec® Patterned Symtex® Face Weight 30 oz/sq yd 1017 g/sq m Gauge 5/64 50.4 rows/10 cm Stitches per Inch 10.4 40.9 pu/10 cm Pile Height Average 0.187 inch 4.7 mm Fiber System Antron® Legacy Nylon Dye Method 95% Solution Dyed / 5%Yarn Dyed Soil/Stain Protection Ensure 19.3 Kilotex Primary Tufting Substrate Synthetic Non-Woven Pattern Repeat N/A

Third Party Environmental Certifications Product Recycled Content NSF 140-2007

Overall Post-Consumer Certified ER3® Modular 44-65% 10% Platinum Certified Powerbond® ethos™ Cushion 36-61% 18% Platinum Certified Powerbond® ER3® Cushion 39-59% 10% Platinum Certified Flex-Aire™ Cushion Modular 15-33% **Recycled content certified by SCS and varies by product style.

Product Testing/Information Antimicrobial Chemicals No antimicrobials (EPA Registered pesticides) added to product (ASTM E2471-05) Electrostatic Propensity 1.8 kV (AATCC 134); Permanent Conductive Fiber Surface Flammability Passes CPSC FF 1-70 (ASTM D-2859) Flooring Radiant Panel Class 1 (mean average CRF: 0.45 w/sq cm or higher) (ASTM E-648) Smoke Generation Less than 450 (ASTM E-662)

Installation Methods Peel and Stick RS Adhesive System - Full Coverage Peel & Stick Wet Spread Backing specific Tandus Adhesives Installation Method Modular - Horizontal, Quarter Turn, Random / Powerbond - Horizontal Ashlar

Product Notes

1. Specifications are subject to nominal manufacturing variances. Material supply and/or manufacturing processes may necessitate changes without notice. Colors may vary slighlty from dye lot to dye lot.

2. U.S. Patent numbers: 4,849,297; 4,49,267; 5,728,741; 5,855,981; 5,914,353; 6,406,574

3. The use of chair pads under roller caster chairs may be required in order to maintain full limited warranty coverage.

Please refer to the applicable limited warranty verbiage for specific requirements. In all cases, chair pads are recommended for optimum textural performance. Absent the use of chair pads, more intensive direct maintenance will be required for areas in contact with chair caster traffic, and some degree of appearance change is to be expected.

See limited warranty for details. Limited warranty and maintenance information may be accessed at www.tandus/com/limitedwarranty and www.tandus.com/maintenance or by dialing 800-248-2878

800.848.2878 tandus.com millernl

Product Construction

Modular Options

IMPERIAL METRIC TEST METHOD

Warranty: 15 year limited warranty against excessive surface wear, static, delamination, edge ravel, zippering & backing resiliency loss.

ER3® Modular Total Product Recycled Content 48.1% Pre-Consumer: 38.1% Post-Consumer: 10% SCS Certified Third Party Certfication NSF-140 Platinum SCS Certified Product Size 24" x 24" Tile Only Secondary Backing 100% Recycled Content with Tru Bloc (Barrier System) Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Secondary Backing Density 65 lbs/cu ft 1041 kg/cu m Secondary Backing Thickness 0.087 inch 2.2 mm Total Weight with RS / Non-RS 142.5 140.9 oz/sq yd +/-5% 4832 4778 g/sq m CRI Green Label Plus Certification GLP1366

Flex-Aire™ Cushion Modular Total Product Recycled Content 17.2% SCS Certified Product Size 24" x 24" Tile Only Secondary Backing Fiberglass Reinforced Composite Closed Cell Cushion Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Cushion Weight 35.5 oz/sq yd 1203 g/sq m ASTM D-3574 Cushion Density 18.5 lbs/cu ft 296 kg/cu m ASTM D-3574 Cushion Thickness 0.156 inch 4.0 mm ASTM D-3574 Total Weight with RS / Non-RS 131.1 129.7 oz/sq yd +/-5% 4446 4398 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 5 Min. 25 max lbs/sq inch @ 25% 352 1758 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP6558

800.248.2878 tandus.com 5/10

Product Construction

Powerbond® (VCTT Sheet Flooring) Powerbond Options

IMPERIAL METRIC TEST METHOD

Warranty: 25 year non-prorated limited warranty against excessive surface wear, static, delamination, edge ravel, zippering & backing resiliency loss.

Powerbond ethos™ Cushion Total Product Recycled Content 37.3% Pre-Consumer: 19.3% Post-Consumer: 18% SCS Certified Third Party Certification NSF-140 Platinum SCS Certified Product Size 6 ft. 1.8 m Cushion 76% Recycled Content Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Density 32 lbs/cu ft 513 kg/cu m ASTM D-3574 Cushion Thickness 0.100 inch 2.5 mm ASTM D-3574 Total Weight 101.0 oz/sq yd +/-5% 3425 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection Min. 29 lbs/sq inch @ 25% 2039 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP8320

Powerbond ER3® Cushion Total Product Recycled Content 40.5% Pre-Consumer: 30.5% Post-Consumer: 10% SCS Certified Third Party Certification NSF-140 Platinum SCS Certified Product Size 6 ft. 1.8 m Cushion 98% Recycled Content Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Density 28.5 lbs/cu ft 457 kg/cu m ASTM D-3574 Cushion Thickness 0.125 inch 3.2 mm ASTM D-3574 Total Weight 116.6 oz/sq yd +/-5% 3954 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 7 Min. 25 max lbs/sq inch @ 25% 492 1758 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP8030

Powerbond Cushion Product Size 6 ft. 1.8 m Cushion Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Weight 35.5 oz/sq yd 1203 g/sq m ASTM D-3574 Cushion Density 18.5 lbs/cu ft 296 kg/cu m ASTM D-3574 Cushion Thickness 0.156 inch 4.0 mm ASTM D-3574 Total Weight with RS / Non-RS 93.0 90.7 oz/sq yd +/-5% 3154 3076 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 7 Min. 25 max lbs/sq inch @ 25% 492 1758 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP9744

Powerbond Condensed Cushion Product Size 6 ft. 1.8 m Cushion Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Weight 25.5 oz/sq yd 864 g/sq m ASTM D-3574 Cushion Density 33 lbs/cu ft 529 kg/cu m ASTM D-3574 Cushion Thickness 0.065 inch 1.7 mm ASTM D-3574 Total Weight with RS / Non-RS 83.4 80.7 oz/sq yd +/-5% 2829 2737 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection Min. 29 lbs/sq inch @ 25% 2039 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP9744

800.248.2878 tandus.com 4/10

ID

EN

T

IT

Y

™ FLO

O R

/W A

LL

G

LA

Z

E D

C E

R A

M

IC

/ C O

LO

R

B O

D Y

P

O R

C E

LA

IN

millernl

CT-1

Floor Tile

FABRIC (LIGHT POLISHED & UNPOLISHED)

METRO TAUPE MY22

PARAMOUNT WHITE MY20 BISTRO CREAM MY21 IMPERIAL GOLD MY23

OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26

GROOVED (12 X 24 ONLY - LIGHT POLISHED & UNPOLISHED)

METRO TAUPE MY32

PARAMOUNT WHITE MY30 BISTRO CREAM MY31 IMPERIAL GOLD MY33

OXFORD BROWN MY34 CASHMERE GRAY MY35 TWILIGHT BLACK MY36

CEMENT (18 X 18 ONLY - UNPOLISHED ONLY)

METRO TAUPE MY42

PARAMOUNT WHITE MY40 BISTRO CREAM MY41 IMPERIAL GOLD MY43

OXFORD BROWN MY44 CASHMERE GRAY MY45 TWILIGHT BLACK MY46

Close-up of Fabric Tile

Close-up of Grooved Tile

Close-up of Cement Tile fl oo r w al l co un te rt op

COLORBODY™ PORCELAINIDENTITY™ FLOOR

SIZES

SQ.FT.

CARTON

PCS. PER

CARTON

24 x 24 Field Tile (Fabric only)

23-1/2" x 23-1/2" (59.8 cm x 59.8 cm) 15.49 4

12 x 24 Field Tile* (Fabric & Grooved)

11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) 11.62 6

18 x 18 Field Tile** (Fabric & Cement)

17-5/8" x 17-5/8" (44.8 cm x 44.8 cm) 13.07 6

12 x 12 Field Tile (Fabric only)

11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 11.62 12

1 x 3 Mosaic (Mesh-mounted) (Unpolished Fabric only)

Sheet: 11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 9.00 9

12 x 24 Decorative Accent 11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) -- 4 n Grooved available in 12 x 24 unpolished and light polished only.

s Cement available in 18 x 18 unpolished only.

LINEAR OPTIONS™ SIZES

SQ.FT.

CARTON

PIECES PER

CARTON

6 x 24 Field Tile 6" x 23-1/2" (14.63 cm x 59.8 cm) 10.65 11

4 x 24 Field Tile 4" x 23-1/2" (9.73 cm x 59.8 cm) 6.46 10

2 x 24 Field Tile 2" x 23-1/2" (4.67 cm x 59.8 cm) 6.66 20

Additional linear and rectangular sizes available through Linear Options™, Daltile’s linear cutting service. Visit www.daltile.com/linearoptions for sizes and order information.

NOTES

Identity Fabric (Light Polish Surface) **Please Read Carefully** Note to Tile Installer: This product is directional by design and MUST be installed with the arrows on the back of each tile facing in the same direction.

Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.

Manufactured in accordance with ANSI A137.1 standards.

For additional information refer to “Factors to Consider” at: www.daltile.com/CommercialFactors

Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

INSTALLATION

THICKNESS GROUT JOINT RECOMMENDATION

3/8" 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)

RESIDENTIAL USAGE

FLOORS WALLS COUNTERTOPS

EXTERIOR

PATIOS

EXTERIOR POOL

DECKS

F W C EP** ED*

All surfaces are suitable for pool linings.

*Fabric Unpolished surface only.

**Unpolished only.

TRIM

TYPE NUMBER SIZE

PCS. PER

CARTON

Bullnose (Fabric) (Light Polished & Unpolished) S-44C9 4 x 12 30

Bullnose (Grooved) (Light Polished & Unpolished) S-44F9 4 x 24 10

Bullnose (Cement) (Unpolished) S-44H9 4 x 18 10

Cove Base (Fabric) S-36C9TB 6 x 12 30

Cove Base Outcorner (Fabric) SC-36C9T 1 x 6 15

TEST RESULTS (Unpolished only)

ASTM# RESULT

Water Absorption C373 < 0.5%

Breaking Strength C648 > 550 lbs

Scratch Hardness MOHS 8.0 (6.0 for Twilight Black)

Chemical Resistance C650 Resistant

Coefficient of Friction (Unpolished) C1028 Wet: ≥0.60 Dry: ≥0.70

Coefficient of Friction (Light Polished) C1028 Wet: ≥0.50 Dry: ≥0.60

SLIP RESISTANCE (WET) : 2 & 3

The higher the rating, the higher the slip resistance.

1 < .50

2 .50 - .59 (Light Polished)

3 ≥ .60 (Unpolished)

COMMERCIAL USAGE

INTERIOR EXTERIOR

RESIDENTIAL

LIGHT

COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL

Floors/Patios * * *

Walls/Backsplashes

Countertops

Pool Decking**

Pool Linings

* Unpolished only

** Fabric (Unpolished only)

FABRIC (Unpolished only): Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

GROOVED: Suitable for exterior patios (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

CEMENT: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

COLORBODY™ PORCELAINIDENTITY™ FLOOR

SHADE VARIATION

MEDIUM (V2)

Color variation within each tile.

gallery™ colorbody™ porcelain floor slimlite™ glazed porcelain wall glazed ceramic wall

(1), (2), and (3), indicate Price Groups, (1) being the least expensive. *Yellow is not available in wall items.

FLOOR & WALL COLORS

YeLLOW J501* (1)

Red J504 (3)

ORAnge J503 (2)

BLue J505 (2)

BLACk J506 (1)

WHITe J500 (1)

LIme J502 (1) millernl

CT-2, CT-3, CT-4

Designed to help earn LEEDTM Credits.

At Daltile, we help make it easier for you to earn points toward LEEDTM certification so you don’t have to compromise your design for any reason. We use recycled materials in many of our products and have multiple manufacturing facilities providing the potential to be within 500 miles of your projects. For detailed information, visit daltilegreenworks.com gallery™ colorbody™ porcelain floor slimlite™ glazed porcelain wall glazed ceramic wall

SIZeS

Sq. Ft. Per Carton

Pieces Per Carton

24 x 24 Floor Tile (Polished & Unpolished)

(23-1/2” x 23-1/2”) (59.55 cm x 59.55 cm) 11.44 3

12 x 24 Floor Tile/Accents (Polished & Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 13.34 7

12 x 24 Ridged Accent (Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 11.44 6

23-1/2 x 27 Hexagon (Unpolished)

(23-1/2” x 27-1/8”) (59.55 cm x 68.76 cm) 9.87 3

12 x 24 Wall Tile (Polished & Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 11.44 6

12 x 24 SlimLite™ Wall Tile (Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 20.96 11

12 x 36 Wall Tile/Accents (Polished & Unpolished)

(11-11/16” x 35-1/4”) (29.75 cm x 89.46 cm) 11.46 4

6 x 36 Wall Tile (Polished & Unpolished)

(5-13/16” x 35-1/4”) (14.74 cm x 89.46 cm) 11.32 8

TRIm

Type Number Size Pieces per carton

Bullnose S-43F9 3 x 24 18

Bullnose S-43C9 3 x 12 29

FLOOR COLOR AVAILABILITY

COLOR

Hexagon

Unpolished 24 x 24

Unpolished 24 x 24 Polished

12 x 24 Unpolished

12 x 24 Polished

12 x 24 Unpolished

Ridged

12 x 24 Polished Grooves

12 x 24 Polished

Mini-Grooves

White

Yellow

Lime

Orange

Red

Blue

Black

WALL COLOR AVAILABILITY

COLOR

12 x 36

Unpolished 12 x 36 Polished

12 x 36 Unpolished

Ruled 6 x 36

Unpolished 6 x 36

Polished 12 x 24

Unpolished 12 x 24 Polished

12 x 24 Unpolished SlimLite™

White

Yellow

Lime

Orange

Red

Blue

Black

(Floor & SlimLite™ only)

InSTALLATIOn

Thickness Grout Joint Recommendation Shade Variation

3/8” - Floor, 12 x 24 Wall & Decos 7/16” - 12 x 36 & 6 x 36 Wall

3/16” - SlimLite™ Wall

1/8” (3/16” when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%) Low (V1)

TeST ReSuLTS FLOOR WALL

ASTM# UNPOLISHED POLISHED SLIMLITE™ WALL TILE & DECO

Water Absorption C373 < 0.5% < 0.5% < 0.5% < 11.0%

Breaking Strength C648 > 400 lbs > 400 lbs > 100 lbs > 200 lbs

Scratch Hardness MOHS 8.0 8.0 6.0 6.0

Chemical Resistance C650 Resistant Resistant Resistant Resistant

Coefficient of Friction C1028 Wet: ≥ 0.60 Dry: ≥ 0.70

Wet: ≥ 0.50 Dry: ≥ 0.60 - - - -

APPLICATIOn InTeRIOR eXTeRIOR

Residential Light

Commercial Commercial Residential Commercial

Floors/Patios* ** **

Walls/Backsplashes

Countertops

Pool Decking

Pool Lining

Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

*Floor tile only **Unpolished Only nOTeS

Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

Special care needs to be given when installing tiles 20” and larger. Please refer to www.daltile.com/LargeTiles for information.

Depth VV or AD Frame (New Construction)

TT Overlap Frame (Retrofits)

Grille Only 1-1/2" 1-1/2"

Grille & Frame (Level Base) 1-5/8" 1-1/2"

Grille & Frame (Drain Pan) 2-1/2" 2-1/2"

AD FRAMETT OVERLAP FRAMEVV EMBEDDED FRAME

2' Span 2'8" Span 3'6" Span

3,831 2,653 1,583

Maximum Rolling Load Pounds per wheel for Level Base Installation

Level Base Installation Options For Advanced Track, Dual Track and Dri Track

Features Zones

Exclusive, cross bolt technology outlasts traditional welded key-lock construction Heaviest rolling load in the industry Anti-slip surface for indoor applications; ADA compliant Wide variety of Designer Insert Options available Custom shapes available Advanced Track and Dri Track can be radius cut Frames come pre-assembled Drain pan option available Common Uses–office buildings, retail stores, malls, supermarkets, hospitals, schools, libraries, airports

Specifications

Advanced Track Material Heavy gauge 6061-T6 aluminum with aluminum alloy 6063-T5 scraping rails and standard 100% nylon fiber drying inserts. 58.62% pre-consumer and 15.5% post-consumer recycled content. Recycled content varies with Designer Insert Options.

Dual Track Material Heavy gauge 6061-T6 with 43.97% pre-consumer and 14.12% post-consumer recycled content, aluminum with vinyl scraping and standard 100% nylon drying inserts. Vinyl scraper bars available in black, gray and brown. Recycled content varies with Designer Insert Options.

Dri Track Material Heavy gauge 6061-T6 aluminum with standard 100% nylon fiber drying inserts. 51.84% pre-consumer and 14.86% post-consumer recycled content. Recycled content varies with Designer Insert Options.

Style Scraping and drying surface with bolted cross supports Size Custom made to your requirements. Consult our Product Specialists for assistance.

Maximum Panel Size 48" (front and back) x 42" (left to right) Multiple panels are used to construct the foot grille system

Possible LEED Credits

MR Credit 2 (1 point) MR Credit 4 (1-2 points) MR Credit 5 (1-2 points) IEQ Credit 5 (1 point)

1 2 3 4 miVantage™ Heaviest rolling load in the industry with a wide selection of Designer Insert Options

Advanced Track, Dual Track and Dri Track

Boston-Kenmore High durability nylon fibers (6.6)

NaturTile™ Designer nylon fibers (6.6)

Brown Charcoal

Gray Blue

Boston-Fenway High durability nylon fibers (6.6)

Brown Charcoal

Gray Blue

Slate Ocean

Earth Meadow

See Page

See Page

See Page

Dri Track D e ep R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

EN

TR

A N

C

E SY

STEM

S &

M A

T

TIN

G

FO

O T G

R

ILLES

millernl

D esign er Ins er t O pt io ns Enhance the beauty of the entrance system by matching Zone 3 (lobby) matting with the Foot Grille Designer Inserts in Zone 2 (vestibule). Coordinating Zone 3 matting product pages are referenced below.

Dual Track D e ep R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

Blue Red Charcoal Dark Gray

Cocoa Charcoal Splash

Commuter rail application takes on the traffic of the entire city of Chicago

Brown

New York Collection Premium high durability nylon fibers (6.6)

Supreme Nop Aggressive and attractive polypropylene fiber

Tweed Brown Sable Brown Natural Autumn Red Spruce

Sapphire Black Walnut Midnight Blue Charcoal Dark Gray

See Page

See Page

Advanced Track D e e p R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

ENTRANCE SYSTEMS & MAT TING FOOT GRILLES

Th e cl ea n lin es du ra bi lit y an d sm oo th qu ie t op er at io n of

E m pe ro r lo ck er s m ak e th em t he i de al ch oi ce f or v ir tu al ly e ve ry f ac ili ty

A va ila bl e in a w id e ra ng e of s iz es ti er s an d de si gn er c ol or s, E m pe ro r lo ck er s ar an at tr ac ti ve an d ef fe ct iv e st or ag e so lu ti on

Ea ch lo ck er b ui lt s ha ll ha ve a d oo r m ou nt ed in a f ra m e.

In di vi du al t op

, b ot to m

, s id e, b ac k, s he lv es

, w it h a co m m on s id e se pa ra ti ng c om pa rt m en ts

H ad ri an

EM

PE

RO

R" l oc ke rs a re w ar ra nt ed f or a p er io d of t w o ye ar s ag ai ns t de fe ct iv e pa rt s an d w or km an sh ip

, e xc lu di ng v an da lis m a nd im pr op er in st al la ti on

A ll lo ck er p ar ts s ha ll be m ad e of m ild c ol d ro lle d sh ee t st ee l fr ee f ro m s ur fa ce i m pe rf ec ti on s an d co nt am in an ts w hi ch w ou ld b e de tr im en ta l to t he a cc ep ta nc e of a h ig h gr ad e hy br id e po xy p ol ye st er po w de r fi ni sh

. A t a sl ig ht e xt ra c os t, lo ck er p ar ts m ay b e m ad e fr om g al va nn ea l s te el . A ss em bl y fa st en er s sh al l b e zi nc p la te d fl at h ea d sc re w s w it h he x nu ts . R iv et s (A dv el

-0

3)

/1

6" a lu m in um d om e he ad 8-d om e w it h st ee l s ha ft a re a ls o av ai la bl e up on r eq ue st

D oo rs s ha ll be o f a do ub le -p an d es ig n co ns is ti ng o f a g au ge o ut er p an el w el de d to a ga ug e in ne r pa ne l t o fo rm a ri gi d bo x co ns tr uc ti on th at re si st s p ry in g.

T he o ut er p an el to b e do ub le fl an ge d on a ll fo ur ed ge s an d th e in ne r pa ne l s in gl e fl an ge d on a ll fo ur e…