Rev 2 Attach-1_22 00 00 Specs.pdf

FAANG F- 35 Repai r Hangar , Bl dg, 1001 Pond Pr oj ect #: 1220605 LSGA212001 Amendement 2

SECTI ON 22 00 00

PLUMBI NG, GENERAL PURPOSE

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AI R- CONDI TI ONI NG, HEATI NG AND REFRI GERATI ON I NSTI TUTE ( AHRI )

AHRI 1010 ( 2002) Sel f - Cont ai ned, Mechani cal l y Ref r i ger at ed Dr i nki ng- Wat er Cool er s

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

ANSI Z21. 10. 3/ CSA 4. 3 ( 2019) Gas- Fi r ed Wat er Heat er s Vol . I I I , St or age Wat er Heat er s Wi t h I nput Rat i ngs Above 75, 000 Bt u Per Hour , Ci r cul at i ng and I nst ant aneous

ANSI Z21. 22/ CSA 4. 4 ( 2015; R 2020) Rel i ef Val ves f or Hot Wat er Suppl y Syst ems

AMERI CAN SOCI ETY OF HEATI NG, REFRI GERATI NG AND AI R- CONDI TI ONI NG

ENGI NEERS ( ASHRAE)

ASHRAE 146 ( 2020) Met hod of Test i ng and Rat i ng Pool Heat er s

AMERI CAN SOCI ETY OF MECHANI CAL ENGI NEERS ( ASME)

ASME A112. 6. 1M ( 1997; R 2017) Fl oor Af f i xed Suppor t s f or Of f - t he- Fl oor Pl umbi ng Fi xt ur es f or Publ i c Use

ASME A112. 6. 3 ( 2019) St andar d f or Fl oor and Tr ench Dr ai ns

ASME A112. 14. 1 ( 2003; R 2017; R 2022) Backwat er Val ves

ASME A112. 19. 2/ CSA B45. 1 ( 2018; ERTA 2018) St andar d f or Vi t r eous Chi na Pl umbi ng Fi xt ur es and Hydr aul i c Requi r ement s f or Wat er Cl oset s and Ur i nal s

ASME A112. 19. 3/ CSA B45. 4 ( 2022) St ai nl ess St eel Pl umbi ng Fi xt ur es

ASME A112. 36. 2M ( 1991; R 2017) Cl eanout s

ASME B1. 20. 1 ( 2013; R 2018) Pi pe Thr eads, Gener al Pur pose ( I nch)

ASME B16. 3 ( 2021) Mal l eabl e I r on Thr eaded Fi t t i ngs, Cl asses 150 and 300

SECTI ON 22 00 00 Page 1

ASME B16. 4 ( 2021) Gr ay I r on Thr eaded Fi t t i ngs;

Cl asses 125 and 250

ASME B16. 5 ( 2020) Pi pe Fl anges and Fl anged Fi t t i ngs NPS 1/ 2 Thr ough NPS 24 Met r i c/ I nch St andar d

ASME B16. 12 ( 2019) Cast I r on Thr eaded Dr ai nage Fi t t i ngs

ASME B16. 15 ( 2018) Cast Copper Al l oy Thr eaded Fi t t i ngs Cl asses 125 and 250

ASME B16. 18 ( 2021) Cast Copper Al l oy Sol der Joi nt Pr essur e Fi t t i ngs

ASME B16. 21 ( 2021) Nonmet al l i c Fl at Gasket s f or Pi pe Fl anges

ASME B16. 22 ( 2021) Wr ought Copper and Copper Al l oy Sol der Joi nt Pr essur e Fi t t i ngs

ASME B16. 23 ( 2021) Cast Copper Al l oy Sol der Joi nt Dr ai nage Fi t t i ngs - DWV

ASME B16. 24 ( 2022) Cast Copper Al l oy Pi pe Fl anges, Fl anged Fi t t i ngs, and Val ves Cl asses 150, 300, 600, 900, 1500, and 2500

ASME B16. 29 ( 2017) Wr ought Copper and Wr ought Copper Al l oy Sol der - Joi nt Dr ai nage Fi t t i ngs - DWV

ASME B16. 34 ( 2021) Val ves - Fl anged, Thr eaded and Wel di ng End

ASME B16. 39 ( 2020) St andar d f or Mal l eabl e I r on Thr eaded Pi pe Uni ons; Cl asses 150, 250, and 300

ASME B16. 50 ( 2021) Wr ought Copper and Copper Al l oy Br aze- Joi nt Pr essur e Fi t t i ngs

ASME B16. 51 ( 2013) Copper and Copper Al l oy Pr ess- Connect Pr essur e Fi t t i ngs

ASME B31. 1 ( 2022) Power Pi pi ng

ASME B31. 5 ( 2020) Ref r i ger at i on Pi pi ng and Heat Tr ansf er Component s

ASME B40. 100 ( 2013) Pr essur e Gauges and Gauge At t achment s

ASME BPVC SEC I V ( 2017) BPVC Sect i on I V- Rul es f or Const r uct i on of Heat i ng Boi l er s

ASME BPVC SEC I X ( 2017; Er r at a 2018) BPVC Sect i on I X- Wel di ng, Br azi ng and Fusi ng Qual i f i cat i ons

ASME CSD- 1 ( 2021) Cont r ol and Saf et y Devi ces f or

SECTI ON 22 00 00 Page 2

Aut omat i cal l y Fi r ed Boi l er s

AMERI CAN SOCI ETY OF SANI TARY ENGI NEERI NG ( ASSE)

ASSE 1003 ( 2020) Per f or mance Requi r ement s f or Wat er Pr essur e Reduci ng Val ves f or Domest i c Wat er Di st r i but i on Syst ems - ( ANSI appr oved 2010)

ASSE 1010 ( 2021) Per f or mance Requi r ement s f or Wat er Hammer Ar r est er s

ASSE 1018 ( 2001; R 2021) Per f or mance Requi r ement s f or Tr ap Seal Pr i mer Val ves - Pot abl e Wat er Suppl i ed ( ANSI Appr oved 2002

AMERI CAN WATER WORKS ASSOCI ATI ON ( AWWA)

AWWA 10084 ( 2017) St andar d Met hods f or t he Exami nat i on of Wat er and Wast ewat er

AWWA B300 ( 2018) Hypochl or i t es

AWWA B301 ( 2018) Li qui d Chl or i ne

AWWA C203 ( 2020) Coal - Tar Pr ot ect i ve Coat i ngs and Li ni ngs f or St eel Wat er Pi pel i nes - Enamel and Tape - Hot - Appl i ed

AWWA C606 ( 2015) Gr ooved and Shoul der ed Joi nt s

AWWA C651 ( 2014) St andar d f or Di s i nf ect i ng Wat er Mai ns

AWWA C652 ( 2019) Di s i nf ect i on of Wat er - St or age Faci l i t i es

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS A5. 8/ A5. 8M ( 2019) Speci f i cat i on f or Fi l l er Met al s f or Br azi ng and Br aze Wel di ng

AWS B2. 2/ B2. 2M ( 2016) Speci f i cat i on f or Br azi ng Pr ocedur e and Per f or mance Qual i f i cat i on

ASTM I NTERNATI ONAL ( ASTM)

ASTM A47/ A47M ( 1999; R 2022; E 2022) St andar d Speci f i cat i on f or Fer r i t i c Mal l eabl e I r on Cast i ngs

ASTM A53/ A53M ( 2022) St andar d Speci f i cat i on f or Pi pe, St eel , Bl ack and Hot - Di pped, Zi nc- Coat ed, Wel ded and Seaml ess

ASTM A74 ( 2021) St andar d Speci f i cat i on f or Cast I r on Soi l Pi pe and Fi t t i ngs

ASTM A105/ A105M ( 2021) St andar d Speci f i cat i on f or Car bon

SECTI ON 22 00 00 Page 3

St eel For gi ngs f or Pi pi ng Appl i cat i ons

ASTM A183 ( 2014; R 2020) St andar d Speci f i cat i on f or Car bon St eel Tr ack Bol t s and Nut s

ASTM A193/ A193M ( 2022a) St andar d Speci f i cat i on f or Al l oy- St eel and St ai nl ess St eel Bol t i ng Mat er i al s f or Hi gh- Temper at ur e Ser vi ce and Ot her Speci al Pur pose Appl i cat i ons

ASTM A515/ A515M ( 2017; R2022) St andar d Speci f i cat i on f or Pr essur e Vessel Pl at es, Car bon St eel , f or I nt er medi at e- and Hi gher - Temper at ur e Ser vi ce

ASTM A516/ A516M ( 2017) St andar d Speci f i cat i on f or Pr essur e Vessel Pl at es, Car bon St eel , f or Moder at e-and Lower - Temper at ur e Ser vi ce

ASTM A518/ A518M ( 1999; R 2022) St andar d Speci f i cat i on f or Cor r osi on- Resi st ant Hi gh- Si l i con I r on Cast i ngs

ASTM A536 ( 1984; R 2019; E 2019) St andar d Speci f i cat i on f or Duct i l e I r on Cast i ngs

ASTM A733 ( 2016; R 2022) St andar d Speci f i cat i on f or Wel ded and Seaml ess Car bon St eel and Aust eni t i c St ai nl ess St eel Pi pe Ni ppl es

ASTM A888 ( 2021a) St andar d Speci f i cat i on f or Hubl ess Cast I r on Soi l Pi pe and Fi t t i ngs f or Sani t ar y and St or m Dr ai n, Wast e, and Vent Pi pi ng Appl i cat i ons

ASTM B32 ( 2020) St andar d Speci f i cat i on f or Sol der Met al

ASTM B42 ( 2020) St andar d Speci f i cat i on f or Seaml ess Copper Pi pe, St andar d Si zes

ASTM B43 ( 2020) St andar d Speci f i cat i on f or Seaml ess Red Br ass Pi pe, St andar d Si zes

ASTM B75/ B75M ( 2020) St andar d Speci f i cat i on f or Seaml ess Copper Tube

ASTM B88 ( 2022) St andar d Speci f i cat i on f or Seaml ess Copper Wat er Tube

ASTM B88M ( 2020) St andar d Speci f i cat i on f or Seaml ess Copper Wat er Tube ( Met r i c)

ASTM B117 ( 2019) St andar d Pr act i ce f or Oper at i ng Sal t Spr ay ( Fog) Appar at us

ASTM B152/ B152M ( 2019) St andar d Speci f i cat i on f or Copper Sheet , St r i p, Pl at e, and Rol l ed Bar

SECTI ON 22 00 00 Page 4

ASTM B306 ( 2020) St andar d Speci f i cat i on f or Copper Dr ai nage Tube ( DWV)

ASTM B370 ( 2022) St andar d Speci f i cat i on f or Copper Sheet and St r i p f or Bui l di ng Const r uct i on

ASTM B584 ( 2022) St andar d Speci f i cat i on f or Copper Al l oy Sand Cast i ngs f or Gener al Appl i cat i ons

ASTM B813 ( 2016) St andar d Speci f i cat i on f or Li qui d and Past e Fl uxes f or Sol der i ng of Copper and Copper Al l oy Tube

ASTM B828 ( 2016) St andar d Pr act i ce f or Maki ng Capi l l ar y Joi nt s by Sol der i ng of Copper and Copper Al l oy Tube and Fi t t i ngs

ASTM C564 ( 2020a) St andar d Speci f i cat i on f or Rubber Gasket s f or Cast I r on Soi l Pi pe and Fi t t i ngs

ASTM C920 ( 2018) St andar d Speci f i cat i on f or El ast omer i c Joi nt Seal ant s

ASTM C1053 ( 2000; R 2010) St andar d Speci f i cat i on f or Bor osi l i cat e Gl ass Pi pe and Fi t t i ngs f or Dr ai n, Wast e, and Vent ( DWV) Appl i cat i ons

ASTM D1248 ( 2016) St andar d Speci f i cat i on f or Pol yet hyl ene Pl ast i cs Ext r usi on Mat er i al s f or Wi r e and Cabl e

ASTM D1785 ( 2015; E 2018) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) , Pl ast i c Pi pe, Schedul es 40, 80, and 120

ASTM D2000 ( 2018) St andar d Cl assi f i cat i on Syst em f or Rubber Pr oduct s i n Aut omot i ve Appl i cat i ons

ASTM D2235 ( 2004; R 2016) St andar d Speci f i cat i on f or Sol vent Cement f or Acr yl oni t r i l e- But adi ene- St yr ene ( ABS) Pl ast i c Pi pe and Fi t t i ngs

ASTM D2239 ( 2012) St andar d Speci f i cat i on f or Pol yet hyl ene ( PE) Pl ast i c Pi pe ( SI DR- PR) Based on Cont r ol l ed I nsi de Di amet er

ASTM D2241 ( 2015) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pr essur e- Rat ed Pi pe ( SDR Ser i es)

ASTM D2464 ( 2015) St andar d Speci f i cat i on f or Thr eaded Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 80

ASTM D2466 ( 2017) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe

SECTI ON 22 00 00 Page 5

Fi t t i ngs, Schedul e 40

ASTM D2467 ( 2015) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 80

ASTM D2564 ( 2020) St andar d Speci f i cat i on f or Sol vent Cement s f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pi ng Syst ems

ASTM D2657 ( 2007; R 2015) Heat Fusi on Joi ni ng Pol yol ef i n Pi pe and Fi t t i ngs

ASTM D2661 ( 2014; E 2018) St andar d Speci f i cat i on f or Acr yl oni t r i l e- But adi ene- St yr ene ( ABS) Schedul e 40, Pl ast i c Dr ai n, Wast e, and Vent Pi pe and Fi t t i ngs

ASTM D2665 ( 2014) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Dr ai n, Wast e, and Vent Pi pe and Fi t t i ngs

ASTM D2672 ( 2014) Joi nt s f or I PS PVC Pi pe Usi ng Sol vent Cement

ASTM D2683 ( 2020) St andar d Speci f i cat i on f or Socket - Type Pol yet hyl ene Fi t t i ngs f or Out si de Di amet er - Cont r ol l ed Pol yet hyl ene Pi pe and Tubi ng

ASTM D2737 ( 2012a) Pol yet hyl ene ( PE) Pl ast i c Tubi ng

ASTM D2822/ D2822M ( 2005; R 2011; E 2011) St andar d Speci f i cat i on f or Asphal t Roof Cement , Asbest os- Cont ai ni ng

ASTM D2846/ D2846M ( 2019) St andar d Speci f i cat i on f or Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Hot - and Col d- Wat er Di st r i but i on Syst ems

ASTM D2855 ( 2015) St andar d Pr act i ce f or Maki ng Sol vent - Cement ed Joi nt s wi t h Pol y( Vi nyl Chl or i de) ( PVC) Pi pe and Fi t t i ngs

ASTM D2996 ( 2017) St andar d Speci f i cat i on f or Fi l ament - Wound " Fi ber gl ass" ( Gl ass- Fi ber - Rei nf or ced Ther moset t i ng- Resi n) Pi pe

ASTM D3035 ( 2015) Pol yet hyl ene ( PE) Pl ast i c Pi pe ( DR- PR) Based on Cont r ol l ed Out si de Di amet er

ASTM D3122 ( 1995; R 2009) Sol vent Cement s f or St yr ene- Rubber ( SR) Pl ast i c Pi pe and Fi t t i ngs

ASTM D3138 ( 2004; R 2016) St andar d Speci f i cat i on f or

SECTI ON 22 00 00 Page 6

Sol vent Cement s f or Tr ansi t i on Joi nt s Bet ween Acr yl oni t r i l e- But adi ene- St yr ene ( ABS) and Pol y( Vi nyl Chl or i de) ( PVC) Non- Pr essur e Pi pi ng Component s

ASTM D3139 ( 2019) Joi nt s f or Pl ast i c Pr essur e Pi pes Usi ng Fl exi bl e El ast omer i c Seal s

ASTM D3212 ( 2020) St andar d Speci f i cat i on f or Joi nt s f or Dr ai n and Sewer Pl ast i c Pi pes Usi ng Fl exi bl e El ast omer i c Seal s

ASTM D3261 ( 2016) St andar d Speci f i cat i on f or But t Heat Fusi on Pol yet hyl ene ( PE) Pl ast i c Fi t t i ngs f or Pol yet hyl ene ( PE) Pl ast i c Pi pe and Tubi ng

ASTM D3311 ( 2017) St andar d Speci f i cat i on f or Dr ai n, Wast e, and Vent ( DWV) Pl ast i c Fi t t i ngs Pat t er ns

ASTM D4101 ( 2017) St andar d Cl assi f i cat i on Syst em and Basi s f or Speci f i cat i on f or Pol ypr opyl ene I nj ect i on and Ext r usi on Mat er i al s

ASTM E1 ( 2014) St andar d Speci f i cat i on f or ASTM Li qui d- i n- Gl ass Ther momet er s

ASTM F409 ( 2022) St andar d Speci f i cat i on f or Ther mopl ast i c Accessi bl e and Repl aceabl e Pl ast i c Tube and Tubul ar Fi t t i ngs

ASTM F437 ( 2021) St andar d Speci f i cat i on f or Thr eaded Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 80

ASTM F438 ( 2017) St andar d Speci f i cat i on f or Socket - Type Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 40

ASTM F439 ( 2019) St andar d Speci f i cat i on f or Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 80

ASTM F441/ F441M ( 2020) St andar d Speci f i cat i on f or Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Pi pe, Schedul es 40 and 80

ASTM F442/ F442M ( 2020) St andar d Speci f i cat i on f or Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Pl ast i c Pi pe ( SDR- PR)

ASTM F477 ( 2014; R 2021) St andar d Speci f i cat i on f or El ast omer i c Seal s ( Gasket s) f or Joi ni ng Pl ast i c Pi pe

ASTM F493 ( 2022) St andar d Speci f i cat i on f or Sol vent Cement s f or Chl or i nat ed Pol y ( Vi nyl

SECTI ON 22 00 00 Page 7

Chl or i de) ( CPVC) Pl ast i c Pi pe and Fi t t i ngs

ASTM F628 ( 2022) St andar d Speci f i cat i on f or Acr yl oni t r i l e- But adi ene- St yr ene ( ABS) Schedul e 40 Pl ast i c Dr ai n, Wast e, and Vent Pi pe wi t h a Cel l ul ar Cor e

ASTM F877 ( 2022) St andar d Speci f i cat i on f or Cr ossl i nked Pol yet hyl ene ( PEX) Pl ast i c Hot - and Col d- Wat er Di st r i but i on Syst ems

ASTM F891 ( 2016) St andar d Speci f i cat i on f or Coext r uded Pol y ( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe wi t h a Cel l ul ar Cor e

ASTM F1290 ( 2019) St andar d Pr act i ce f or El ect r of usi on Joi ni ng Pol yol ef i n Pi pe and Fi t t i ngs

ASTM F1760 ( 2016; R 2020) St andar d Speci f i cat i on f or Coext r uded Pol y( Vi nyl Chl or i de) ( PVC) Non- Pr essur e Pl ast i c Pi pe Havi ng Repr ocessed- Recycl ed Cont ent

ASTM F2389 ( 2021) St andar d Speci f i cat i on f or Pr essur e- r at ed Pol ypr opyl ene ( PP) Pi pi ng Syst ems

CAST I RON SOI L PI PE I NSTI TUTE ( CI SPI )

CI SPI 301 ( 2018) Hubl ess Cast I r on Soi l Pi pe and Fi t t i ngs f or Sani t ar y and St or m Dr ai n, Wast e, and Vent Pi pi ng Appl i cat i ons

CI SPI 310 ( 2012) Coupl i ng f or Use i n Connect i on wi t h Hubl ess Cast I r on Soi l Pi pe and Fi t t i ngs f or Sani t ar y and St or m Dr ai n, Wast e, and Vent Pi pi ng Appl i cat i ons

COPPER DEVELOPMENT ASSOCI ATI ON ( CDA)

CDA A4015 ( 2016; 14/ 17) Copper Tube Handbook

I NTERNATI ONAL ASSOCI ATI ON OF PLUMBI NG AND MECHANI CAL OFFI CI ALS

( I APMO)

I APMO PS 117 ( 2005b) Pr ess Type Or Pl ai n End Rub Gasket ed W/ Nai l CU & CU Al l oy Fi t t i ngs 4 I nst al l On CU Tubi ng

I NTERNATI ONAL CODE COUNCI L ( I CC)

I CC A117. 1 ( 2017) St andar d And Comment ar y Accessi bl e and Usabl e Bui l di ngs and Faci l i t i es

I CC I PC ( 2021) I nt er nat i onal Pl umbi ng Code

I NTERNATI ONAL SAFETY EQUI PMENT ASSOCI ATI ON ( I SEA)

ANSI / I SEA Z358. 1 ( 2014) Amer i can Nat i onal St andar d f or

SECTI ON 22 00 00 Page 8

Emer gency Eyewash and Shower Equi pment

MANUFACTURERS STANDARDI ZATI ON SOCI ETY OF THE VALVE AND FI TTI NGS

I NDUSTRY ( MSS)

MSS SP- 25 ( 2018) St andar d Mar ki ng Syst em f or Val ves, Fi t t i ngs, Fl anges and Uni ons

MSS SP- 44 ( 2019) St eel Pi pel i ne Fl anges

MSS SP- 58 ( 2018) Pi pe Hanger s and Suppor t s - Mat er i al s, Desi gn and Manuf act ur e, Sel ect i on, Appl i cat i on, and I nst al l at i on

MSS SP- 67 ( 2022) But t er f l y Val ves

MSS SP- 70 ( 2011) Gr ay I r on Gat e Val ves, Fl anged and Thr eaded Ends

MSS SP- 71 ( 2018) Gr ay I r on Swi ng Check Val ves, Fl anged and Thr eaded Ends

MSS SP- 72 ( 2010a) Bal l Val ves wi t h Fl anged or But t - Wel di ng Ends f or Gener al Ser vi ce

MSS SP- 78 ( 2011) Cast I r on Pl ug Val ves, Fl anged and Thr eaded Ends

MSS SP- 80 ( 2019) Br onze Gat e, Gl obe, Angl e and Check Val ves

MSS SP- 83 ( 2014) Cl ass 3000 St eel Pi pe Uni ons Socket Wel di ng and Thr eaded

MSS SP- 85 ( 2011) Gr ay I r on Gl obe & Angl e Val ves Fl anged and Thr eaded Ends

MSS SP- 110 ( 2010) Bal l Val ves Thr eaded, Socket - Wel di ng, Sol der Joi nt , Gr ooved and Fl ar ed Ends

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

NEMA MG 1 ( 2021) Mot or s and Gener at or s

NEMA MG 11 ( 1977; R 2012) Ener gy Management Gui de f or Sel ect i on and Use of Si ngl e Phase Mot or s

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 90A ( 2021) St andar d f or t he I nst al l at i on of Ai r Condi t i oni ng and Vent i l at i ng Syst ems

NSF I NTERNATI ONAL ( NSF)

NSF 372 ( 2016) Dr i nki ng Wat er Syst em Component s - Lead Cont ent

NSF/ ANSI 14 ( 2021) Pl ast i cs Pi pi ng Syst em Component s

SECTI ON 22 00 00 Page 9 and Rel at ed Mat er i al s

NSF/ ANSI 61 ( 2022) Dr i nki ng Wat er Syst em Component s - Heal t h Ef f ect s

PLASTI C PI PE AND FI TTI NGS ASSOCI ATI ON ( PPFA)

PPFA Fi r e Man ( 2016) Fi r est oppi ng: Pl ast i c Pi pe i n Fi r e Resi st i ve Const r uct i on

PLUMBI NG AND DRAI NAGE I NSTI TUTE ( PDI )

PDI WH 201 ( 2010) Wat er Hammer Ar r est er s St andar d

SOCI ETY OF AUTOMOTI VE ENGI NEERS I NTERNATI ONAL ( SAE)

SAE J1508 ( 2009) Hose Cl amp Speci f i cat i ons

U. S. DEPARTMENT OF ENERGY ( DOE)

Ener gy St ar ( 1992; R 2006) Ener gy St ar Ener gy Ef f i c i ency Label i ng Syst em ( FEMP)

U. S. ENVI RONMENTAL PROTECTI ON AGENCY ( EPA)

PL 93- 523 ( 1974; A 1999) Saf e Dr i nki ng Wat er Act

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

10 CFR 430 Ener gy Conser vat i on Pr ogr am f or Consumer Pr oduct s

40 CFR 141. 80 Nat i onal Pr i mar y Dr i nki ng Wat er Regul at i ons; Cont r ol of Lead and Copper ;

Gener al Requi r ement s

UNDERWRI TERS LABORATORI ES ( UL)

UL 499 ( 2014; Repr i nt Jun 2022) UL St andar d f or Saf et y El ect r i c Heat i ng Appl i ances

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 02 Shop Dr awi ngs

Pl umbi ng Syst em; G

Det ai l dr awi ngs consi st i ng of schedul es, per f or mance char t s, i nst r uct i ons, di agr ams, and ot her i nf or mat i on t o i l l ust r at e t he r equi r ement s and oper at i ons of syst ems t hat ar e not cover ed by t he Pl umbi ng Code. Det ai l dr awi ngs f or t he compl et e pl umbi ng syst em i ncl udi ng pi pi ng l ayout s and l ocat i ons of connect i ons; di mensi ons

SECTI ON 22 00 00 Page 10 f or r oughi ng- i n, f oundat i on, and suppor t poi nt s; schemat i c di agr ams and wi r i ng di agr ams or connect i on and i nt er connect i on di agr ams. Det ai l dr awi ngs shal l i ndi cat e c l ear ances r equi r ed f or mai nt enance and oper at i on. Wher e pi pi ng and equi pment ar e t o be suppor t ed ot her t han as i ndi cat ed, det ai l s shal l i ncl ude l oadi ngs and pr oposed suppor t met hods. Mechani cal dr awi ng pl ans, el evat i ons, v i ews, and det ai l s, shal l be dr awn t o scal e.

SD- 03 Pr oduct Dat a

Backf l ow Pr event i on Assembl i es; G

Shower Faucet s; G

Fi xt ur es

Li st of i nst al l ed f i x t ur es wi t h manuf act ur er , model , and f l ow r at e.

Fl ush Val ve Wat er Cl oset s

Wat er Sense Label f or Fl ush Val ve Wat er Cl oset ; S

Fl ush Val ve Ur i nal s

Wat er Sense Label f or Ur i nal ; S

Wal l Hung Lavat or i es

Count er t op Lavat or i es

Ki t chen Si nks

Wat er Sense Label f or Shower head; S

Wat er Heat er s; G

Wel di ng

A copy of qual i f i ed pr ocedur es and a l i s t of names and i dent i f i cat i on symbol s of qual i f i ed wel der s and wel di ng oper at or s.

Vi br at i on- Absor bi ng Feat ur es; G

Det ai l s of v i br at i on- absor bi ng f eat ur es, i ncl udi ng ar r angement , f oundat i on pl an, di mensi ons and speci f i cat i ons.

Pl umbi ng Syst em

Di agr ams, i nst r uct i ons, and ot her sheet s pr oposed f or post i ng.

Manuf act ur er ' s r ecommendat i ons f or t he i nst al l at i on of bel l and spi got and hubl ess j oi nt s f or cast i r on soi l pi pe.

SD- 06 Test Repor t s

Test s, Fl ushi ng and Di si nf ect i on

Test r epor t s i n bookl et f or m showi ng al l f i el d t est s per f or med t o adj ust each component and al l f i el d t est s per f or med t o pr ove

SECTI ON 22 00 00 Page 11 compl i ance wi t h t he speci f i ed per f or mance cr i t er i a, compl et i on and t est i ng of t he i nst al l ed syst em. Each t est r epor t shal l i ndi cat e t he f i nal posi t i on of cont r ol s.

Test of Backf l ow Pr event i on Assembl i es; G.

Cer t i f i cat i on of pr oper oper at i on shal l be as accompl i shed i n accor dance wi t h st at e r egul at i ons by an i ndi v i dual cer t i f i ed by t he st at e t o per f or m such t est s. I f no st at e r equi r ement exi st s, t he Cont r act or shal l have t he manuf act ur er ' s r epr esent at i ve t est t he devi ce, t o ensur e t he uni t i s pr oper l y i nst al l ed and per f or mi ng as i nt ended. The Cont r act or shal l pr ovi de wr i t t en document at i on of t he t est s per f or med and si gned by t he i ndi v i dual per f or mi ng t he t est s.

SD- 07 Cer t i f i cat es

Mat er i al s and Equi pment

Wher e equi pment i s speci f i ed t o conf or m t o r equi r ement s of t he ASME Boi l er and Pr essur e Vessel Code, t he desi gn, f abr i cat i on, and i nst al l at i on shal l conf or m t o t he code.

Bol t s

Wr i t t en cer t i f i cat i on by t he bol t manuf act ur er t hat t he bol t s f ur ni shed compl y wi t h t he speci f i ed r equi r ement s.

SD- 10 Oper at i on and Mai nt enance Dat a

Pl umbi ng Syst em; G

Submi t i n accor dance wi t h Sect i on 01 78 23 OPERATI ON AND

MAI NTENANCE DATA.

1. 3 STANDARD PRODUCTS

Speci f i ed mat er i al s and equi pment shal l be st andar d pr oduct s of a manuf act ur er r egul ar l y engaged i n t he manuf act ur e of such pr oduct s.

Speci f i ed equi pment shal l essent i al l y dupl i cat e equi pment t hat has per f or med sat i sf act or i l y at l east t wo year s pr i or t o bi d openi ng.

St andar d pr oduct s shal l have been i n sat i sf act or y commer ci al or i ndust r i al use f or 2 year s pr i or t o bi d openi ng. The 2- year use shal l i ncl ude appl i cat i ons of equi pment and mat er i al s under s i mi l ar c i r cumst ances and of s i mi l ar s i ze. The pr oduct shal l have been f or sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 2 year per i od.

1. 3. 1 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a t wo- year f i el d ser vi ce r ecor d wi l l be accept abl e i f a cer t i f i ed r ecor d of sat i sf act or y f i el d oper at i on f or not l ess t han 6000 hour s, excl usi ve of t he manuf act ur er ' s f act or y or l abor at or y t est s, can be shown.

1. 3. 2 Ser vi ce Suppor t

The equi pment i t ems shal l be suppor t ed by ser vi ce or gani zat i ons. Submi t a cer t i f i ed l i s t of qual i f i ed per manent ser vi ce or gani zat i ons f or suppor t of

SECTI ON 22 00 00 Page 12 t he equi pment whi ch i ncl udes t hei r addr esses and qual i f i cat i ons. These ser vi ce or gani zat i ons shal l be r easonabl y conveni ent t o t he equi pment i nst al l at i on and abl e t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

1. 3. 3 Manuf act ur er ' s Namepl at e

Each i t em of equi pment shal l have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , and ser i al number secur el y af f i xed i n a conspi cuous pl ace; t he namepl at e of t he di st r i but i ng agent wi l l not be accept abl e.

1. 3. 4 Modi f i cat i on of Ref er ences

I n each of t he publ i cat i ons r ef er r ed t o her ei n, consi der t he advi sor y pr ovi s i ons t o be mandat or y, as t hough t he wor d, " shal l " had been subst i t ut ed f or " shoul d" wher ever i t appear s. I nt er pr et r ef er ences i n t hese publ i cat i ons t o t he " aut hor i t y havi ng j ur i sdi ct i on" , or wor ds of s i mi l ar meani ng, t o mean t he Cont r act i ng Of f i cer .

1. 3. 4. 1 Def i ni t i ons

For t he I nt er nat i onal Code Counci l ( I CC) Codes r ef er enced i n t he cont r act document s, advi sor y pr ovi s i ons shal l be consi der ed mandat or y, t he wor d " shoul d" shal l be i nt er pr et ed as " shal l . " Ref er ence t o t he " code of f i c i al " shal l be i nt er pr et ed t o mean t he " Cont r act i ng Of f i cer . " For Navy owned pr oper t y, r ef er ences t o t he " owner " shal l be i nt er pr et ed t o mean t he " Cont r act i ng Of f i cer . " For l eased f aci l i t i es, r ef er ences t o t he " owner " shal l be i nt er pr et ed t o mean t he " l essor . " Ref er ences t o t he " per mi t hol der " shal l be i nt er pr et ed t o mean t he " Cont r act or . "

1. 3. 4. 2 Admi ni st r at i ve I nt er pr et at i ons

For I CC Codes r ef er enced i n t he cont r act document s, t he pr ovi s i ons of Chapt er 1, " Admi ni st r at or , " do not appl y. These admi ni st r at i ve r equi r ement s ar e cover ed by t he appl i cabl e Feder al Acqui s i t i on Regul at i ons ( FAR) i ncl uded i n t hi s cont r act and by t he aut hor i t y gr ant ed t o t he Of f i cer i n Char ge of Const r uct i on t o admi ni st er t he const r uct i on of t hi s pr oj ect . Ref er ences i n t he I CC Codes t o sect i ons of Chapt er 1, shal l be appl i ed appr opr i at el y by t he Cont r act i ng Of f i cer as aut hor i zed by hi s admi ni st r at i ve cogni zance and t he FAR.

1. 4 DELI VERY, STORAGE, AND HANDLI NG

Handl e, st or e, and pr ot ect equi pment and mat er i al s t o pr event damage bef or e and dur i ng i nst al l at i on i n accor dance wi t h t he manuf act ur er ' s r ecommendat i ons, and as appr oved by t he Cont r act i ng Of f i cer . Repl ace damaged or def ect i ve i t ems.

1. 5 PERFORMANCE REQUI REMENTS

1. 5. 1 Wel di ng

Pi pi ng shal l be wel ded i n accor dance wi t h qual i f i ed pr ocedur es usi ng per f or mance- qual i f i ed wel der s and wel di ng oper at or s. Pr ocedur es and wel der s shal l be qual i f i ed i n accor dance wi t h ASME BPVC SEC I X. Wel di ng pr ocedur es qual i f i ed by ot her s, and wel der s and wel di ng oper at or s qual i f i ed by anot her empl oyer , may be accept ed as per mi t t ed by ASME B31. 1.

The Cont r act i ng Of f i cer shal l be not i f i ed 24 hour s i n advance of t est s, SECTI ON 22 00 00 Page 13 and t he t est s shal l be per f or med at t he wor k s i t e i f pr act i cabl e. Wel der s or wel di ng oper at or s shal l appl y t hei r assi gned symbol s near each wel d t hey make as a per manent r ecor d.

1. 5. 2 Cat hodi c Pr ot ect i on and Pi pe Joi nt Bondi ng

Cat hodi c pr ot ect i on and pi pe j oi nt bondi ng syst ems shal l be i n accor dance wi t h.

1. 6 REGULATORY REQUI REMENTS

Unl ess ot her wi se r equi r ed her ei n, pl umbi ng wor k shal l be i n accor dance wi t h I CC I PC.

1. 7 PROJECT/ SI TE CONDI TI ONS

The Cont r act or shal l become f ami l i ar wi t h det ai l s of t he wor k, ver i f y di mensi ons i n t he f i el d, and advi se t he Cont r act i ng Of f i cer of any di scr epancy bef or e per f or mi ng any wor k.

1. 8 I NSTRUCTI ON TO GOVERNMENT PERSONNEL

When speci f i ed i n ot her sect i ons, f ur ni sh t he ser vi ces of compet ent i nst r uct or s t o gi ve f ul l i nst r uct i on t o t he desi gnat ed Gover nment per sonnel i n t he adj ust ment , oper at i on, and mai nt enance, i ncl udi ng per t i nent saf et y r equi r ement s, of t he speci f i ed equi pment or syst em.

I nst r uct or s shal l be t hor oughl y f ami l i ar wi t h al l par t s of t he i nst al l at i on and shal l be t r ai ned i n oper at i ng t heor y as wel l as pr act i cal oper at i on and mai nt enance wor k.

I nst r uct i on shal l be gi ven dur i ng t he f i r st r egul ar wor k week af t er t he equi pment or syst em has been accept ed and t ur ned over t o t he Gover nment f or r egul ar oper at i on. The number of man- days ( 8 hour s per day) of i nst r uct i on f ur ni shed shal l be as speci f i ed i n t he i ndi v i dual sect i on.

When mor e t han 4 man- days of i nst r uct i on ar e speci f i ed, use appr oxi mat el y hal f of t he t i me f or c l assr oom i nst r uct i on. Use ot her t i me f or i nst r uct i on wi t h t he equi pment or syst em.

When si gni f i cant changes or modi f i cat i ons i n t he equi pment or syst em ar e made under t he t er ms of t he cont r act , pr ovi de addi t i onal i nst r uct i on t o acquai nt t he oper at i ng per sonnel wi t h t he changes or modi f i cat i ons.

1. 9 ACCESSI BI LI TY OF EQUI PMENT

I nst al l al l wor k so t hat par t s r equi r i ng per i odi c i nspect i on, oper at i on, mai nt enance, and r epai r ar e r eadi l y accessi bl e. I nst al l conceal ed val ves, expansi on j oi nt s, cont r ol s, damper s, and equi pment r equi r i ng access, i n l ocat i ons f r eel y accessi bl e t hr ough access door s.

PART 2 PRODUCTS

2. 1 MATERI ALS

Mat er i al s f or var i ous ser vi ces shal l be i n accor dance wi t h TABLES I and I I .

Pi pe schedul es shal l be sel ect ed based on ser vi ce r equi r ement s. Pi pe f i t t i ngs shal l be compat i bl e wi t h t he appl i cabl e pi pe mat er i al s. Pl ast i c pi pe, f i t t i ngs, and sol vent cement shal l meet NSF/ ANSI 14 and shal l be NSF l i s t ed f or t he ser vi ce i nt ended. Pl ast i c pi pe, f i t t i ngs, and sol vent cement used f or pot abl e hot and col d wat er ser vi ce shal l bear t he NSF seal

SECTI ON 22 00 00 Page 14

" NSF- PW. " Pol ypr opyl ene pi pe and f i t t i ngs shal l conf or m t o di mensi onal r equi r ement s of Schedul e 40, I r on Pi pe si ze and shal l compl y wi t h NSF/ ANSI 14, NSF/ ANSI 61 and ASTM F2389. Pol ypr opyl ene pi pi ng t hat wi l l be exposed t o UV l i ght shal l be pr ovi ded wi t h a Fact or y appl i ed UV r esi st ant coat i ng. Pi pe t hr eads ( except dr y seal ) shal l conf or m t o ASME B1. 20. 1. Gr ooved pi pe coupl i ngs and f i t t i ngs shal l be f r om t he same manuf act ur er . Mat er i al or equi pment cont ai ni ng a wei ght ed aver age of gr eat er t han 0. 25 per cent l ead shal l not be used i n any pot abl e wat er syst em i nt ended f or human consumpt i on, and shal l be cer t i f i ed i n accor dance wi t h NSF/ ANSI 61, Annex G or NSF 372. I n l i ne devi ces such as wat er met er s, bui l di ng val ves, check val ves, met er st ops, val ves, f i t t i ngs and back f l ow pr event er s shal l compl y wi t h PL 93- 523 and NSF/ ANSI 61, Sect i on 8. End poi nt devi ces such as dr i nki ng wat er f ount ai ns, l avat or y f aucet s, k i t chen and bar f aucet s, r esi dent i al i ce maker s, suppl y st ops and end poi nt cont r ol val ves used t o di spense wat er f or dr i nki ng must meet t he r equi r ement s of NSF/ ANSI 61, Sect i on 9. Hubl ess cast - i r on soi l pi pe shal l not be i nst al l ed under gr ound, under concr et e f l oor s l abs, or i n cr awl spaces bel ow ki t chen f l oor s. Pl ast i c pi pe shal l not be i nst al l ed i n ai r pl enums. Pl ast i c pi pe shal l not be i nst al l ed i n a pr essur e pi pi ng syst em i n bui l di ngs gr eat er t han t hr ee st or i es i ncl udi ng any basement l evel s.

2. 1. 1 Pi pe Joi nt Mat er i al s

Gr ooved pi pe and hubl ess cast - i r on soi l pi pe shal l not be used under gr ound. Sol der cont ai ni ng l ead shal l not be used wi t h copper pi pe.

Cast i r on soi l pi pe and f i t t i ngs shal l be mar ked wi t h t he col l ect i ve t r ademar k of t he Cast I r on Soi l I nst i t ut e. Joi nt s and gasket mat er i al s shal l conf or m t o t he f ol l owi ng:

a. Coupl i ng f or Cast - I r on Pi pe: f or hub and spi got t ype ASTM A74, AWWA C606. For hubl ess t ype: CI SPI 310

b. Coupl i ng f or St eel Pi pe: AWWA C606.

c. Coupl i ngs f or Gr ooved Pi pe: . .

d. Fl ange Gasket s: Gasket s shal l be made of non- asbest os mat er i al i n accor dance wi t h ASME B16. 21. Gasket s shal l be f l at , 1/ 16 i nch t hi ck, and cont ai n Ar ami d f i ber s bonded wi t h St yr ene But adi ene Rubber ( SBR) or Ni t r o But adi ene Rubber ( NBR) . Gasket s shal l be t he f ul l f ace or sel f cent er i ng f l at r i ng t ype. Gasket s used f or hydr ocar bon ser vi ce shal l be bonded wi t h NBR.

e. Br azi ng Mat er i al : Br azi ng mat er i al shal l conf or m t o AWS A5. 8/ A5. 8M, BCuP- 5.

f . Br azi ng Fl ux: Fl ux shal l be i n past e or l i qui d f or m appr opr i at e f or use wi t h br azi ng mat er i al . Fl ux shal l be as f ol l ows: l ead- f r ee; have a 100 per cent f l ushabl e r esi due; cont ai n s l i ght l y aci di c r eagent s;

cont ai n pot assi um bor i des; and cont ai n f l uor i des.

g. Sol der Mat er i al : Sol der met al shal l conf or m t o ASTM B32.

h. Sol der Fl ux: Fl ux shal l be l i qui d f or m, non- cor r osi ve, and conf or m t o ASTM B813, St andar d Test 1.

i . PTFE Tape: PTFE Tape, f or use wi t h Thr eaded Met al or Pl ast i c Pi pe.

j . Rubber Gasket s f or Cast - I r on Soi l - Pi pe and Fi t t i ngs ( hub and spi got

SECTI ON 22 00 00 Page 15 t ype and hubl ess t ype) : ASTM C564.

k. Rubber Gasket s f or Gr ooved Pi pe: ASTM D2000, maxi mum t emper at ur e 230 degr ees F.

l . Fl exi bl e El ast omer i c Seal s: ASTM D3139, ASTM D3212 or ASTM F477.

m. Bol t s and Nut s f or Gr ooved Pi pe Coupl i ngs: Heat - t r eat ed car bon st eel , ASTM A183.

n. Sol vent Cement f or Tr ansi t i on Joi nt s bet ween ABS and PVC Nonpr essur e Pi pi ng Component s: ASTM D3138.

o. Pl ast i c Sol vent Cement f or ABS Pl ast i c Pi pe: ASTM D2235.

p. Pl ast i c Sol vent Cement f or PVC Pl ast i c Pi pe: ASTM D2564 and ASTM D2855.

q. Pl ast i c Sol vent Cement f or CPVC Pl ast i c Pi pe: ASTM F493.

r . Fl anged f i t t i ngs i ncl udi ng, but not l i mi t ed t o, f l anges, bol t s, nut s and bol t pat t er ns shal l be i n accor dance wi t h ASME B16. 5 c l ass 150 and shal l have t he manuf act ur er ' s t r ademar k af f i xed i n accor dance wi t h MSS SP- 25. Fl ange mat er i al shal l conf or m t o ASTM A105/ A105M. Bl i nd f l ange mat er i al shal l conf or m t o ASTM A516/ A516M col d ser vi ce and ASTM A515/ A515M f or hot ser vi ce. Bol t s shal l be hi gh st r engt h or i nt er medi at e st r engt h wi t h mat er i al conf or mi ng t o ASTM A193/ A193M.

s. Pl ast i c Sol vent Cement f or St yr ene Rubber Pl ast i c Pi pe: ASTM D3122.

t . Pr ess f i t t i ngs f or Copper Pi pe and Tube: Copper pr ess f i t t i ngs shal l conf or m t o t he mat er i al and si z i ng r equi r ement s of ASME B16. 51 and per f or mance cr i t er i a of I APMO PS 117. Seal i ng el ement s f or copper pr ess f i t t i ngs shal l be EPDM, FKM or HNBR. Seal i ng el ement s shal l be f act or y i nst al l ed or an al t er nat i ve suppl i ed f i t t i ng manuf act ur er .

Seal i ng el ement shal l be sel ect ed based on manuf act ur er ' s appr oved appl i cat i on gui del i nes.

u. Copper t ubi ng shal l conf or m t o ASTM B88, Type K, L or M.

v. Heat - f usi on j oi nt s f or pol ypr opyl ene pi pi ng: ASTM F2389.

2. 1. 2 Mi scel l aneous Mat er i al s

Mi scel l aneous mat er i al s shal l conf or m t o t he f ol l owi ng:

a. Wat er Hammer Ar r est er : PDI WH 201.

b. Copper , Sheet and St r i p f or Bui l di ng Const r uct i on: ASTM B370.

c. Asphal t Roof Cement : ASTM D2822/ D2822M.

d. Hose Cl amps: SAE J1508.

e. Suppor t s f or Of f - The- Fl oor Pl umbi ng Fi xt ur es: ASME A112. 6. 1M.

f . Met al l i c Cl eanout s: ASME A112. 36. 2M.

g. Pl umbi ng Fi xt ur e Set t i ng Compound: A pr ef or med f l exi bl e r i ng seal

SECTI ON 22 00 00 Page 16 mol ded f r om hydr ocar bon wax mat er i al . The seal mat er i al shal l be nonvol at i l e nonasphal t i c and cont ai n ger mi ci de and pr ovi de wat er t i ght , gast i ght , odor pr oof and ver mi npr oof pr oper t i es.

h. Coal - Tar Pr ot ect i ve Coat i ngs and Li ni ngs f or St eel Wat er Pi pel i nes:

AWWA C203.

i . Hypochl or i t es: AWWA B300.

j . Li qui d Chl or i ne: AWWA B301.

k. Gauges - Pr essur e and Vacuum I ndi cat i ng Di al Type - El ast i c El ement :

ASME B40. 100.

l . Ther momet er s: ASTM E1. Mer cur y shal l not be used i n t her momet er s.

2. 1. 3 Pi pe I nsul at i on Mat er i al

I nsul at i on shal l be as speci f i ed i n Sect i on 23 07 00 THERMAL I NSULATI ON

FOR MECHANI CAL SYSTEMS.

2. 2 PI PE HANGERS, I NSERTS, AND SUPPORTS

Pi pe hanger s, i nser t s, and suppor t s shal l conf or m t o MSS SP- 58.

2. 3 VALVES

Val ves shal l be pr ovi ded on suppl i es t o equi pment and f i xt ur es. Val ves 2- 1/ 2 i nches and smal l er shal l be br onze wi t h t hr eaded bodi es f or pi pe and sol der - t ype connect i ons f or t ubi ng. Val ves 3 i nches and l ar ger shal l have f l anged i r on bodi es and br onze t r i m. Pr essur e r at i ngs shal l be based upon t he appl i cat i on. Gr ooved end val ves may be pr ovi ded i f t he manuf act ur er cer t i f i es t hat t he val ves meet t he per f or mance r equi r ement s of appl i cabl e MSS st andar d. Val ves shal l conf or m t o t he f ol l owi ng st andar ds:

Descr i pt i on St andar d

But t er f l y Val ves MSS SP- 67

Cast - I r on Gat e Val ves, Fl anged and Thr eaded Ends

MSS SP- 70

Cast - I r on Swi ng Check Val ves, Fl anged and Thr eaded Ends

MSS SP- 71

Bal l Val ves wi t h Fl anged But t - Wel di ng Ends f or Gener al Ser vi ce

MSS SP- 72

Bal l Val ves Thr eaded, Socket - Wel di ng, Sol der Joi nt , Gr ooved and Fl ar ed Ends

MSS SP- 110

Cast - I r on Pl ug Val ves, Fl anged and Thr eaded Ends

MSS SP- 78

SECTI ON 22 00 00 Page 17

Br onze Gat e, Gl obe, Angl e, and Check Val ves MSS SP- 80

St eel Val ves, Socket Wel di ng and Thr eaded Ends

ASME B16. 34

Cast - I r on Gl obe and Angl e Val ves, Fl anged and Thr eaded Ends

MSS SP- 85

Backwat er Val ves ASME A112. 14. 1

Vacuum Rel i ef Val ves ANSI Z21. 22/ CSA 4. 4

Wat er Pr essur e Reduci ng Val ves ASSE 1003

Wat er Heat er Dr ai n Val ves ASME BPVC SEC I V, Par t HLW- 810:

Requi r ement s f or Pot abl e- Wat er Heat er s Bot t om Dr ai n Val ve

Tr ap Seal Pr i mer Val ves ASSE 1018

Temper at ur e and Pr essur e Rel i ef Val ves f or Hot Wat er Suppl y Syst ems

ANSI Z21. 22/ CSA 4. 4

Temper at ur e and Pr essur e Rel i ef Val ves f or Aut omat i cal l y Fi r ed Hot Wat er Boi l er s

ASME CSD- 1

Saf et y Code No. , Par t CW, Ar t i c l e 5

2. 3. 1 Wal l Faucet s

Wal l f aucet s wi t h vacuum- br eaker backf l ow pr event er shal l be br ass wi t h 3/ 4 i nch mal e i nl et t hr eads, hexagon shoul der , and 3/ 4 i nch hose connect i on. Faucet handl e shal l be secur el y at t ached t o st em.

2. 3. 2 Ther most at i c Mi xi ng Val ves

Pr ovi de t her most at i c mi xi ng val ve f or l avat or y f aucet s. Mi xi ng val ves, t her most at i c t ype, pr essur e- bal anced or combi nat i on t her most at i c and pr essur e- bal anced shal l be l i ne s i ze and shal l be const r uct ed wi t h r ough or f i ni sh bodi es ei t her wi t h or wi t hout pl at i ng. Each val ve shal l be const r uct ed t o cont r ol t he mi xi ng of hot and col d wat er and t o del i ver wat er at a desi r ed t emper at ur e r egar dl ess of pr essur e or i nput t emper at ur e changes. The cont r ol el ement shal l be of an appr oved t ype. The body shal l be of heavy cast br onze, and i nt er i or par t s shal l be br ass, br onze, cor r osi on- r esi st i ng st eel or copper . The val ve shal l be equi pped wi t h necessar y st ops, check val ves, uni ons, and sedi ment st r ai ner s on t he i nl et s. Mi xi ng val ves shal l mai nt ai n wat er t emper at ur e wi t hi n 5 degr ees F of any set t i ng.

SECTI ON 22 00 00 Page 18

2. 4 FI XTURES

Wat er c l oset r epl acement s i n maj or r enovat i ons may have a f l ush val ve of up t o 1. 6 GPF t o accommodat e exi st i ng pl umbi ng capaci t y. Fi xt ur es f or use by t he physi cal l y handi capped shal l be i n accor dance wi t h I CC A117. 1.

Vi t r eous Chi na, nonabsor bent , har d- bur ned, and vi t r i f i ed t hr oughout t he body shal l be pr ovi ded. Por cel ai n enamel ed war e shal l have speci al l y sel ect ed, c l ear whi t e, aci d- r esi st i ng enamel coat i ng evenl y appl i ed on sur f aces. No f i xt ur e wi l l be accept ed t hat shows cr acks, cr azes, bl i st er s, t hi n spot s, or ot her f l aws. Fi xt ur es shal l be equi pped wi t h appur t enances such as t r aps, f aucet s, st op val ves, and dr ai n f i t t i ngs.

Each f i xt ur e and pi ece of equi pment r equi r i ng connect i ons t o t he dr ai nage syst em, except gr ease i nt er cept or s, shal l be equi pped wi t h a t r ap. Br ass expansi on or t oggl e bol t s capped wi t h acor n nut s shal l be pr ovi ded f or suppor t s, and pol i shed chr omi um- pl at ed pi pe, val ves, and f i t t i ngs shal l be pr ovi ded wher e exposed t o v i ew. Fi xt ur es wi t h t he suppl y di schar ge bel ow t he r i m shal l be equi pped wi t h backf l ow pr event er s. I nt er nal par t s of f l ush val ves and f l ushomet er val ves, shower mi xi ng val ves, shower head f ace pl at es, pop- up st opper s of l avat or y wast e dr ai ns, and pop- up st opper s and over f l ow t ees and shoes of bat ht ub wast e dr ai ns shal l be copper al l oy wi t h al l v i s i bl e sur f aces chr ome pl at ed. Pl ast i c i n cont act wi t h hot wat er shal l be sui t abl e f or 180 degr ees F wat er t emper at ur e.

2. 4. 1 Sub Lavat or i es

Enamel ed cast - i r on l avat or i es shal l be pr ovi ded wi t h t wo cast - i r on or st eel br acket s secur ed t o t he under si de of t he apr on and dr i l l ed f or bol t i ng t o t he wal l i n a manner s i mi l ar t o t he hanger pl at e. Exposed br acket s shal l be por cel ai n enamel ed. Vi t r eous chi na l avat or i es shal l be pr ovi ded wi t h t wo i nt egr al mol ded l ugs on t he back- under si de of t he f i x t ur e and dr i l l ed f or bol t i ng t o t he wal l i n a manner s i mi l ar t o t he hanger pl at e. Pr ovi de Wat er Sense l abel ed f aucet wi t h a maxi mum f l ow r at e of

0. 5 gpm at a f l owi ng pr essur e of 60 psi . Wat er vol ume must be l i mi t ed t o

0. 25 gal per met er i ng cycl e. Pr ovi de dat a i dent i f y i ng Wat er Sense l abel f or l avat or y f aucet .

2. 4. 2 Fl ush Val ve Wat er Cl oset s

ASME A112. 19. 2/ CSA B45. 1, whi t e v i t r eous chi na, s i phon j et , el ongat ed bowl , wal l mount ed, wal l out l et . Top of t oi l et seat hei ght above f l oor shal l be 14 t o 15 i nches, except 17 t o 19 i nches f or wheel chai r wat er c l oset s. Pr ovi de wax bowl r i ng i ncl udi ng pl ast i c s l eeve. Pr ovi de whi t e sol i d pl ast i c el ongat ed open- f r ont seat .

Wat er f l ushi ng vol ume of t he wat er c l oset and f l ush val ve combi nat i on shal l not exceed 1. 28 gal l ons per f l ush. Wat er c l oset s must meet t he EPA Wat er Sense pr oduct def i ni t i on speci f i ed i n ht t p: / / www. epa. gov/ wat er sense/ par t ner s/ pr oduct _pr ogr am_specs. ht ml and must be EPA Wat er Sense l abel ed pr oduct s. Pr ovi de dat a i dent i f y i ng Wat er Sense l abel f or f l ush val ve wat er c l oset .

Pr ovi de l ar ge di amet er manual f l ush val ve i ncl udi ng angl e cont r ol - st op val ve, vacuum br eaker , t ai l pi eces, s l i p nut s, and wal l pl at es; exposed t o v i ew component s shal l be chr omi um- pl at ed or pol i shed st ai nl ess st eel .

Fl ush val ves shal l be nonhol d- open t ype. Mount f l ush val ves not l ess t han 11 i nches above t he f i xt ur e. Mount ed hei ght of f l ush val ve shal l not i nt er f er e wi t h t he hand r ai l i n ADA st al l s. Pr ovi de manual f l ush val ve.

SECTI ON 22 00 00 Page 19

2. 4. 3 Fl ush Val ve Ur i nal s

ASME A112. 19. 2/ CSA B45. 1, whi t e v i t r eous chi na, , wal l - mount ed, wal l out l et , s i phon j et , i nt egr al t r ap, and ext ended si de shi el ds. Wat er f l ushi ng vol ume of t he ur i nal and f l ush val ve combi nat i on shal l not exceed

0. 5 gal l ons per f l ush. Ur i nal s must meet t he speci f i cat i ons of ht t p: / / www. epa. gov/ wat er sense/ par t ner s/ pr oduct _pr ogr am_specs. ht ml and must be EPA Wat er Sense l abel ed pr oduct s. Pr ovi de dat a i dent i f y i ng Wat er Sense l abel f or ur i nal . Pr ovi de ASME A112. 6. 1M conceal ed chai r car r i er s wi t h ver t i cal st eel pi pe suppor t s. Pr ovi de l ar ge di amet er manual f l ush val ve i ncl udi ng angl e cont r ol - st op val ve, vacuum br eaker , t ai l pi eces, s l i p nut s, and wal l pl at es; exposed t o v i ew component s shal l be chr omi um- pl at ed or pol i shed st ai nl ess st eel . Fl ush val ves shal l be nonhol d- open t ype.

Mount f l ush val ves not l ess t han 11 i nches above t he f i xt ur e. Pr ovi de manual f l ush val ve.

2. 4. 4 Wal l Hung Lavat or i es

ASME A112. 19. 2/ CSA B45. 1, whi t e v i t r eous chi na, , st r ai ght back t ype, mi ni mum di mensi ons of 19 i nches, wi de by 17 i nches f r ont t o r ear , wi t h suppl y openi ngs f or use wi t h t op mount ed, manual cent er set f aucet s, and openi ngs f or conceal ed ar m car r i er i nst al l at i on. Pr ovi de aer at or wi t h f aucet . Pr ovi de l avat or y f aucet s and accessor i es meet i ng t he f l ow r at e and pr oduct r equi r ement s of t he par agr aph LAVATORI ES. Pr ovi de ASME A112. 6. 1M conceal ed chai r car r i er s wi t h ver t i cal st eel pi pe suppor t s and conceal ed ar ms f or t he l avat or y. Mount l avat or y wi t h t he f r ont r i m 34 i nches above f l oor and wi t h 29 i nches mi ni mum cl ear ance f r om bot t om of t he f r ont r i m t o f l oor . Pr ovi de t op mount ed washer l ess cent er set manual l avat or y f aucet s.

2. 4. 5 Count er t op Lavat or i es

ASME A112. 19. 2/ CSA B45. 1, whi t e v i t r eous chi na, , sel f - r i mmi ng, mi ni mum di mensi ons of 19 i nches wi de by 17 i nches f r ont t o r ear , wi t h suppl y openi ngs f or use wi t h t op mount ed cent er set , manual f aucet s. Fur ni sh t empl at e and mount i ng k i t by l avat or y manuf act ur er . Pr ovi de aer at or wi t h f aucet . Pr ovi de l avat or y f aucet s and accessor i es meet i ng t he f l ow r at e and pr oduct r equi r ement s of t he par agr aph LAVATORI ES. Mount count er wi t h t he t op sur f ace 34 i nches above f l oor and wi t h 29 i nches mi ni mum cl ear ance f r om bot t om of t he count er f ace t o f l oor . Pr ovi de t op mount ed washer l ess cent er set manual l avat or y f aucet s.

2. 4. 6 Ki t chen Si nks

ASME A112. 19. 3/ CSA B45. 4, 20 gage st ai nl ess st eel wi t h i nt egr al mount i ng r i m f or f l ush i nst al l at i on, mi ni mum di mensi ons of 33 i nches wi de by 21 i nches f r ont t o r ear , t wo compar t ment s, wi t h under si des f ul l y sound deadened, wi t h suppl y openi ngs f or use wi t h t op mount ed washer l ess s i nk f aucet s wi t h hose spr ay, and wi t h 3. 5 i nch dr ai n out l et . Wat er f l ow r at e shal l not exceed 1. 5 gpm when measur ed at a f l owi ng wat er pr essur e of 60 psi . Pr ovi de st ai nl ess st eel dr ai n out l et s and st ai nl ess st eel cup st r ai ner s. Pr ovi de separ at e 1. 5 i nch P- t r ap and dr ai n pi pi ng t o ver t i cal vent pi pi ng f r om each compar t ment . Pr ovi de t op mount ed washer l ess, manual s i nk f aucet s wi t h hose spr ay.

2. 4. 7 Ser vi ce Si nks ASME A112. 19. 3/ CSA B45. 4 302 st ai nl ess st eel doubl e bowl wi t h i nt egr al back and wal l hanger suppor t s, mi ni mum di mensi ons of 22 i nches wi de by 20 i nches f r ont t o r ear , wi t h t wo suppl y openi ngs i n 10 i nch hi gh back.

SECTI ON 22 00 00 Page 20

Pr ovi de f l oor suppor t ed wal l out l et cast i r on P- t r ap and st ai nl ess st eel r i m guar ds as r ecommended by ser vi ce s i nk manuf act ur er . Pr ovi de back mount ed washer l ess st ai nl ess st eel ser vi ce s i nk f aucet s wi t h vacuum br eaker and 0. 75 i nch ext er nal hose t hr eads. The f aucet s shal l be pr ovi ded wi t h i nt egr al mi xi ng val ve, ( 2) 18" st ai nl ess st eel suppl y l i nes, 1/ 2" NPSM x 3/ 8" f emal e f i t t i ngs wi t h an AC adapt er .

2. 4. 8 Dr i nki ng- Wat er Cool er s

AHRI 1010 wi t h mor e t han a s i ngl e t hi ckness of met al bet ween t he pot abl e wat er and t he r ef r i ger ant i n t he heat exchanger , wal l - hung, bubbl er st y l e, ai r - cool ed condensi ng uni t , 4. 75 gph mi ni mum capaci t y, st ai nl ess st eel spl ash r ecept or and basi n, bot t l e f i l l er and st ai nl ess st eel cabi net .

Bubbl er s shal l be cont r ol l ed by push l ever s or push bar s, f r ont mount ed or s i de mount ed near t he f r ont edge of t he cabi net . Bubbl er spout s shal l be mount ed at maxi mum of 36 i nches above f l oor and at f r ont of uni t basi n.

Spout s shal l di r ect wat er f l ow at l east 4 i nches above uni t basi n and t r aj ect or y par al l el or near l y par al l el t o t he f r ont of uni t . [ Pr ovi de f i l t er s f or chl or i ne i n suppl y pi pi ng t o f aucet s. ] Pr ovi de ASME A112. 6. 1M conceal ed st eel pi pe chai r car r i er s. Pr ovi de el ect r i c wat er cool er t hat i s Ener gy St ar l abel ed. Pr ovi de dat a i dent i f y i ng Ener gy St ar l abel f or el ect r i c wat er cool er .

2. 4. 9 Pr ecast Ter r azzo Mop Si nks

Ter r azzo shal l be made of mar bl e chi ps cast i n whi t e por t l and cement t o pr oduce 3000 psi mi ni mum compr essi ve st r engt h 7 days af t er cast i ng.

Pr ovi de f l oor or wal l out l et copper al l oy body dr ai n cast i nt egr al wi t h t er r azzo, wi t h pol i shed st ai nl ess st eel st r ai…