N68335-17-R-0129_conform_copy.pdf

CODE

(Hour)

PAGE(S)

until 12:00 PM local time 26 Sep 2017

X

A

X B

X C X D

EX

X

G

F 192 - 204

205 - 230

X H 231 lisette.behmke@navy .mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

1 239

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N68335 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and see Section L conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

LISETTE BEHMKE 732-323-2547

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

1 - 3

4 - 91

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

92 - 123

124 - 126

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

127 - 132

133 - 160 X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 161 - 164 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 165 - 168 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

169 - 190

PART II - CO NTRACT CLAUSES

NAVAL AIR WARFARE CENTER AD (LKE)

CODE 2.5.2.1.3 BLDG 562-3 RM 310

HWY 547

LAKEHURST NJ 08733-5082 732-323-4068

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

18 Aug 2017

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6833517R0129

Section SF 30 - BLOCK 14 CONTINUATION PAGE

AMENDMENT 0001

The purpose of this Amendment is to give notification that a supplement to Attachment 4 – Technical Data Package

(TDP) is available, provide answers to questions from industry and incorporate the following changes to the solicitation:

1.) Section A: Page 1, block 9: The proposal submittal date has been extended from 18 September 2017 to 26 September 2017

2.) Section A: The proposal validity of 365 days has been added.

3.) Section B: Quantity Ranges have been modified for CLINs: 0101, 0102, 0103AA, 0104, 0105, 0201, 0202, 0203AA, 0204, 0205, 0301, 0303AA, 0304, 0305, 0401, 0403AA, 0404, 0405, 0501, 0503AA, 0504 and 0505.

4.) Section M: NAVAIR Cluase 5252.215-9503 ANTICIPATED AWARD DATE has been filled in with the anticipated award date of August 18, 2018.

Section A - Solicitation/Contract Form

ADDITIONAL INFORMATION

The Contracting Officer for this solicitation is:

Kathryn Scott

Phone: (732) 323-4643

Email: Kathryn.Scott@navy.mil

The Contract Specialist for this solicitation is:

Lisette Behmke

Phone: (732) 323-2547

Email: Lisette.Behmke@navy.mil

All questions in reference to this solicitation should be sent to the above points of contact via email.

Block 12 of SF 33

The Government requests that proposals are valid for at least 365 calendar days.

mailto:Kathryn.Scott@navy.mil mailto:Lisette.Behmke@navy.mil

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 26 Each eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NET AMT

0002 9 Each eCASS EO MEK Integrated Config

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD eCASS HYB MEK Integrated Config

FFP

In accordance with SOW 1.1 and 3.1

0003AA 5 Each eCASS HYB MEK Integrated Config

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0003AB 6 Each eCASS HYB MEK Integrated Config

FFP

(Less GFE Augment –3ea Di-050 & 3ea Ai-710)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0004 16 Each eCASS RF MEK

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0005 10 Each eCASS RF MEK Integrated Config

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0006 6 Each eCASS RF MEK Integration w/HP

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0007 6 Each eCASS HP MEK

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0008 6 Each eCASS HP MEK Integrated Config

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0009 4 Each eCASS SMAT/CAL OTPSs

0010 4 Each eCASS CAL Equipment Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0011 2 Each eCASS Genie Lifts eCASS Rail Kits

0012AA 14 Each eCASS 3 Rack Rail Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0012AB 40 Each eCASS 4 Rack Rail Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0012AC 14 Each eCASS 5.5 Rack Rail Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD eCASS Shore Install Kits

0013AA 9 Each eCASS 3 Rack Shore Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0013AB 11 Each eCASS 4 Rack Shore Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0013AC 6 Each eCASS 5.5 Rack Shore Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD eCASS Ship Install Kits

0014AA 6 Each eCASS 3 Rack Ship Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0014AB 22 Each eCASS 4 Rack Ship Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0014AC 4 Each eCASS 5.5 Rack Ship Install Kits

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0015 2 Each eCASS TPSDe

FFP

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0016 1 Lot First Article Testing (FAT) & Report

FFP

In accordance with SOW 1.1 and 3.1.6.2, CDRLs A00B and A00C

0017 1,000 Hours

Engineering Support Services

CPFF

In accordance with SOW 3.2.8, 3.2.8.6, and 3.2.8.8.3

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

0018 1 Lot Technical Data Items

In accordance with SOW 1.1, 3.1, 3.2 and 4.0

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

Not Separately Priced (NSP)

0019 1 Lot Travel for Engineering Support Services

COST

In accordance with SOW 3.2.8 and 3.2.8.8.3

0101 42 Each OPTION eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

RANGE Qty: 26-45 Each

Evaluated Qty: 42 Each

0102 3 Each OPTION eCASS EO MEK Integrated Config

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-6 Each

Evaluated Qty: 3 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS HYB MEK Integrated Config

FFP

Option 1

0103AA 28 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 12-34 Each

Evaluated Qty: 28 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0103AB 2 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 1

0104 38 Each OPTION eCASS RF MEK

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty. 22-44 each

Evaluated Qty: 38 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0105 36 Each OPTION eCASS RF MEK Integrated Config

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 20-42 Each

Evaluated Qty: 36 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0106 2 Each OPTION eCASS RF MEK Integration w/HP

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0107 2 Each OPTION eCASS HP MEK

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0108 2 Each OPTION eCASS HP MEK Integrated Config

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0109 7 Each OPTION eCASS SMAT/CAL OTPSs

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 7-9 Each

Evaluated Qty: 7 Each

0110 7 Each OPTION eCASS CAL Equipment Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 7-9 Each

Evaluated Qty: 7 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0111 1 Each OPTION eCASS Genie Lifts

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-2 Each

Evaluated Qty: 1 Each

OPTION eCASS Rail Kits

FFP

0112AA 8 Each OPTION eCASS 3 Rack Rail Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0112AB 33 Each OPTION eCASS 4 Rack Rail Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0112AC 9 Each OPTION eCASS 5.5 Rack Rail Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Shore Install Kits

FFP

0113AA 6 Each OPTION eCASS 3 Rack Shore Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0113AB 26 Each OPTION eCASS 4 Rack Shore Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0113AC 2 Each OPTION eCASS 5.5 Rack Shore Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Ship Install Kits

FFP

0114AA 6 Each OPTION eCASS 3 Rack Ship Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0114AB 20 Each OPTION eCASS 4 Rack Ship Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0114AC 4 Each OPTION eCASS 5.5 Rack Ship Install Kits

FFP

Option 1

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0115 1 Each OPTION eCASS TPSDe

FFP

Option 1

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0116 1 Each OPTION eCASS CAL Equipment Suites

FFP

Option 1

In accordance with SOW 1.1 and 3.1

0117 1,000 Hours

OPTION

Engineering Support Services

CPFF

0118 1 Lot OPTION Technical Data Items

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

0119 1 Lot OPTION Travel for Engineering Support Services

COST

Option 1

0201 28 Each OPTION eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

RANGE Qty: 26-45 Each

Evaluated Qty: 28 Each

0202 3 Each OPTION eCASS EO MEK Integrated Config

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-6 Each

Evaluated Qty: 3 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS HYB MEK Integrated Config

FFP

Option 2

0203AA 9 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 7-15 Each

Evaluated Qty: 9 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0203AB 9 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 2

0204 18 Each OPTION eCASS RF MEK

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE: : Qty. 16-24 each

Evaluated Qty: 18 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0205 9 Each OPTION eCASS RF MEK Integrated Config

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 7-15 Each

Evaluated Qty: 9 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0206 9 Each OPTION eCASS RF MEK Integration w/HP

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0207 9 Each OPTION eCASS HP MEK

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0208 9 Each OPTION eCASS HP MEK Integrated Config

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0209 8 Each OPTION eCASS SMAT/CAL OTPSs

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 8-10 Each

Evaluated Qty: 8 Each

0210 8 Each OPTION eCASS CAL Equipment Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 8-10 Each

Evaluated Qty: 8 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0211 1 Each OPTION eCASS Genie Lifts

FFP

Option 2

In accordance with SOW 1.1 and 3.1

OPTION eCASS Rail Kits

FFP

0212AA 3 Each OPTION eCASS 3 Rack Rail Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0212AB 43 Each OPTION eCASS 4 Rack Rail Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0212AC 2 Each OPTION eCASS 5.5 Rack Rail Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Shore Install Kits

FFP

0213AA 6 Each OPTION eCASS 3 Rack Shore Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0213AB 19 Each OPTION eCASS 4 Rack Shore Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0213AC 9 Each OPTION eCASS 5.5 Rack Shore Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Ship Install Kits

FFP

0214AA 6 Each OPTION eCASS 3 Rack Ship Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0214AB 18 Each OPTION eCASS 4 Rack Ship Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0214AC 4 Each OPTION eCASS 5.5 Rack Ship Install Kits

FFP

Option 2

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0215 1 Each OPTION eCASS TPSDe

FFP

Option 2

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0216 1 Each OPTION eCASS CAL Equipment Suites

FFP

Option 2

In accordance with SOW 1.1 and 3.1

0217 1,000 Hours

OPTION

Engineering Support Services

CPFF

0218 1 Lot

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

0219 1 Lot OPTION Travel for Engineering Support Services

COST

Option 2

0301 35 Each OPTION eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

RANGE Qty: 33-52 Each

Evaluated Qty: 35 Each

0302 1 Each OPTION eCASS EO MEK Integrated Config

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS HYB MEK Integrated Config

FFP

Option 3

0303AA 29 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 27-47 Each

Evaluated Qty: 29 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0303AB 2 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 3

0304 24 Each OPTION eCASS RF MEK

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE: Qty: 22-42 each

Evaluated Qty: 24 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0305 22 Each OPTION eCASS RF MEK Integrated Config

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 20-40 Each

Evaluated Qty: 22 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0306 2 Each OPTION eCASS RF MEK Integration w/HP

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0307 2 Each OPTION eCASS HP MEK

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0308 2 Each OPTION eCASS HP MEK Integrated Config

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0309 3 Each OPTION eCASS SMAT/CAL OTPSs

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 3-5 Each

Evaluated Qty: 3 Each

0310 3 Each OPTION eCASS CAL Equipment Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 3-5 Each

Evaluated Qty: 3 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0311 1 Each OPTION eCASS Genie Lifts

FFP

Option 3

In accordance with SOW 1.1 and 3.1

OPTION eCASS Rail Kits

FFP

0312AA 3 Each OPTION eCASS 3 Rack Rail Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0312AB 30 Each OPTION eCASS 4 Rack Rail Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0312AC 3 Each OPTION eCASS 5.5 Rack Rail Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Shore Install Kits

FFP

0313AA 3 Each OPTION eCASS 3 Rack Shore Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0313AB 36 Each OPTION eCASS 4 Rack Shore Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0313AC 2 Each OPTION eCASS 5.5 Rack Shore Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Ship Install Kits

FFP

0314AA 6 Each OPTION eCASS 3 Rack Ship Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0314AB 18 Each OPTION eCASS 4 Rack Ship Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0314AC 4 Each OPTION eCASS 5.5 Rack Ship Install Kits

FFP

Option 3

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0315 1 Each OPTION eCASS TPSDe

FFP

Option 3

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0316 1 Each OPTION eCASS CAL Equipment Suites

FFP

Option 3

In accordance with SOW 1.1 and 3.1

0317 1,000 Hours

OPTION

Engineering Support Services

CPFF

0318 1 Lot

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

0319 1 Lot OPTION Travel for Engineering Support Services

COST

Option 3

0401 49 Each OPTION eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

RANGE Qty: 29-52 Each

Evaluated Qty: 49 Each

0402 1 Each OPTION eCASS EO MEK Integrated Config

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS HYB MEK Integrated Config

FFP

Option 4

0403AA 45 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 29-49 Each

Evaluated Qty: 45 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0403AB 1 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 4

0404 41 Each OPTION eCASS RF MEK

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 25-45 each

Evaluated Qty: 41 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0405 41 Each OPTION eCASS RF MEK Integrated Config

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 25-45 Each

Evaluated Qty: 41 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0406 1 Each OPTION eCASS RF MEK Integration w/HP

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0407 1 Each OPTION eCASS HP MEK

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0408 1 Each OPTION eCASS HP MEK Integrated Config

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0409 3 Each OPTION eCASS SMAT/CAL OTPSs

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 3-5 Each

Evaluated Qty: 3 Each

0410 3 Each OPTION eCASS CAL Equipment Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 3-5 Each

Evaluated Qty: 3 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0411 1 Each OPTION eCASS Genie Lifts

FFP

Option 4

In accordance with SOW 1.1 and 3.1

OPTION eCASS Rail Kits

FFP

0412AA 3 Each OPTION eCASS 3 Rack Rail Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0412AB 3 Each OPTION eCASS 4 Rack Rail Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0412AC 20 Each OPTION eCASS 5.5 Rack Rail Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Shore Install Kits

FFP

0413AA 3 Each OPTION eCASS 3 Rack Shore Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0413AB 36 Each OPTION eCASS 4 Rack Shore Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0413AC 3 Each OPTION eCASS 5.5 Rack Shore Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Ship Install Kits

FFP

0414AA 6 Each OPTION eCASS 3 Rack Ship Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0414AB 18 Each OPTION eCASS 4 Rack Ship Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0414AC 4 Each OPTION eCASS 5.5 Rack Ship Install Kits

FFP

Option 4

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0415 1 Each OPTION eCASS TPSDe

FFP

Option 4

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-2 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0416 1 Each OPTION eCASS CAL Equipment Suites

FFP

Option 4

In accordance with SOW 1.1 and 3.1

0417 1,000 Hours

OPTION

Engineering Support Services

CPFF

0418 1 Lot

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

0419 1 Lot OPTION Travel for Engineering Support Services

COST

Option 4

0501 31 Each OPTION eCASS Core Stations

FFP

In accordance with SOW 1.1 and 3.1

RANGE Qty: 15-34 Each

Evaluated Qty: 31 Each

0502 1 Each OPTION eCASS EO MEK Integrated Config

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS HYB MEK Integrated Config

FFP

Option 5

0503AA 14 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 14-18 Each

Evaluated Qty: 14 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0503AB 1 Each OPTION eCASS HYB MEK Integrated Config

FFP

Option 5

0504 14 Each OPTION eCASS RF MEK

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 14-18 each

Evaluated Qty: 14 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0505 14 Each OPTION eCASS RF MEK Integrated Config

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 14-18 Each

Evaluated Qty: 14 each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0506 1 Each OPTION eCASS RF MEK Integration w/HP

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0507 1 Each OPTION eCASS HP MEK

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0508 1 Each OPTION eCASS HP MEK Integrated Config

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0509 1 Each OPTION eCASS SMAT/CAL OTPSs

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

0510 1 Each OPTION eCASS CAL Equipment Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

RANGE Qty: 1-3 Each

Evaluated Qty: 1 Each

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0511 1 Each OPTION eCASS Genie Lifts

FFP

Option 5

In accordance with SOW 1.1 and 3.1

OPTION eCASS Rail Kits

FFP

0512AA 10 Each OPTION eCASS 3 Rack Rail Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0512AB 20 Each OPTION eCASS 4 Rack Rail Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0512AC 10 Each OPTION eCASS 5.5 Rack Rail Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Shore Install Kits

FFP

0513AA 3 Each OPTION eCASS 3 Rack Shore Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0513AB 17 Each OPTION eCASS 4 Rack Shore Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0513AC 3 Each OPTION eCASS 5.5 Rack Shore Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

OPTION eCASS Ship Install Kits

FFP

0514AA 6 Each OPTION eCASS 3 Rack Ship Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0514AB 18 Each OPTION eCASS 4 Rack Ship Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0514AC 4 Each OPTION eCASS 5.5 Rack Ship Install Kits

FFP

Option 5

In accordance with SOW 1.1 and 3.1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

0515 1 Each OPTION eCASS TPSDe

FFP

0516 1 Each OPTION eCASS CAL Equipment Suites

FFP

Option 5

In accordance with SOW 1.1 and 3.1

0517 1,000 Hours

OPTION

Engineering Support Services

CPFF

0518 1 Lot

Technical Data Items in support of CLINs 0001 through 0015 and 0017 IAW

Attached SOW and Exhibit A & Exhibit B CDRLS

0519 1 Lot OPTION Travel for Engineering Support Services

COST

Option 5

Section C - Descriptions and Specifications

STATEMENT OF WORK

Statement of Work for electronic Consolidated Automated Support System

Full Rate Production 2

1.0 SCOPE

1.1 The Contractor shall fabricate, manufacture, assemble, integrate, produce, test, demonstrate, and deliver Full Rate Production (FRP) AN/USM-737, electronic Consolidated Automated

Support System (eCASS) hardware systems and related equipment, including Self Maintenance and Test/Calibration (SMAT/CAL) Operational Test Program Sets (OTPSs), Calibration

Equipment Suites/Kits, Shore Installation Kits and Ship Installation Kits. All efforts shall be accomplished in accordance with this Statement of Work (SOW) and the latest Government-approved eCASS Technical Data Package (TDP), inclusive of any Engineering Change

Proposals (ECPs), to meet the requirements of the eCASS Performance Specification. All

Contract Data Requirements List (CDRL) items referenced in this SOW are listed in paragraph

4.0, Data Deliverables.

1.2 The Contractor shall provide Program Management to include subcontractors, support for

Program Management Reviews, Data and an Integrated Data Environment, Quality Assurance and Configuration Management in accordance with this SOW.

2.0 APPLICABLE DOCUMENTS

The documents listed in this section form a part of this SOW to the extent invoked by specific reference in other sections of this SOW. The latest revision at time of contract award of the following documents are applicable to this SOW.

NUMBER/NAME TITLE

(1) DoD 4000.25-2-M MILSTRAP Manual (MILSTRAP -Military Standard

Transaction Reporting and Accounting Procedures)

(2) MIL-STD-130N Identification Marking of U.S. Military Property

(3) PMA260 IUID Plan PMA260 Aviation Support Equipment IUID Plan

(4) DoD 4245.7-M Transition from Development to Production

(5) MIL-HDBK-781 Reliability Test Methods, Plans and Environments for

Engineering, Development Qualification, and

Production

(6) 17602002.8 eCASS Configuration Management Plan

(7) 26003062009.0 PMA260 Configuration Management Plan for

Aviation Support Equipment

(8) MIL-STD-2073-1E DoD Standard Practice for Military Packaging

(9) ASTM-D3951-10 Standard Practice for Commercial Packaging

(10) MIL-STD-1686C Electrostatic Discharge Control Program for

Protection of Electrical and Electronic Parts

(11) IPPC ISPM No. 15 Restrictions Regarding Wood Packaging Material

(12) MIL-STD-129R Military Marking for Shipment and Storage

(13) COMNAVAIRFOR INST 4790.2C The Naval Aviation Maintenance Program

(14) SECNAVINST 4855.3C Product Data Reporting and Evaluation Program

(15) DoD Directive 5220.22-M National Industrial Security Program Operating

Manual

(16) SAE AS9100, AS9201, AS9103 International Organization for Standardization

(17) ANSI/ASQC-Q9001 Quality Management Systems Requirements Standard

(18) MIL-HDBK-61A Configuration Management Guidance

(19) MIL-STD-2549 Interface Configuration Management Data Interface

(20) NAVAIR INST 4130.1E NAVAIR Configuration Management Process

(21) ANSI/EIA-649B Configuration Management Standard

(22) DoDI 4140.67 DoD Counterfeit Prevention Policy

(23) DODI 5200.44 Protection of Mission Critical Functions to Achieve

Trusted Systems and Networks

(24) SECNAVINST 4855.20 Counterfeit Material Prevention

(25) NAVAIRINST 4200.56 Critical Item Management

(26) NAVAIRINST 5200.40A Government-Industry Data Exchange Program

(GIDEP)

(27) SAE AS5553A Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition

(28) SAE AS6174A Counterfeit Material; Assuring Acquisition of

Authentic and Conforming Material

(29) International Organization for Standardization (ISO) 9001:2015

(30) American National Standards Institute (ANSI)/ASQC-Q9001

3.0 REQUIREMENTS

3.1 Full Rate Production

This SOW defines the requirements to fabricate, manufacture, assemble, integrate, produce, test, and deliver eCASS Full Rate Production (FRP) systems to the Government. Additionally, documentation shall be provided, technical reviews conducted and audits performed in accordance with this SOW. For the purposes of this SOW, eCASS is defined as a functional test system including all system configurations – Electro-Optic (EO), High Power (HP), Hybrid

(HYB) and Radio Frequency (RF).

3.1.1 Station Serial Number Identification

The Contractor shall assign serial numbers with concurrence, via e-mail to the Contracting

Officer’s Representative (COR). All eCASS support equipment end items, to include hardware sub-elements of the SMAT/CAL OTPSs, shall have a unique six digit serial number consisting of three unique alpha, and three unique numeric characters.

3.1.2 Item Unique Identification (IUID)

The Contractor shall affix IUID labels in accordance with MIL-STD-130N, Item Unique

Identification (IUID) Marking of US Military Property requirements and the PMA260 IUID

Plan. The prime Contractor has the responsibility to enter IUID data to the IUID registry.

Submission of IUID data and acquisition cost shall be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at <http://www.acq.osd.mil/dpap/pdi/uid/>. eCASS IUID requirements shall be tracked at the end item level (stations, ancillaries and calibration standards).

3.1.3 Configuration Status Accounting

The Contractor shall provide the Government with sufficient data to establish, by station serial number, the “as-built” configuration. As a minimum, the data shall indicate the revision level of assets, cabling, hardware and markings to the lowest level of repair. This data shall be submitted in accordance with CDRL A001, Configuration Status Accounting Information.

(CDRL A001 – Configuration Status Accounting Information)

3.1.4 Manufacturing Management Program. (CDRL A002 – Manufacturing and Production

Plan)

3.1.4.1 The Contractor shall conduct a Manufacturing Management Program to include manufacturing program planning and manufacturing operational management. The Contractor shall provide Government access to the manufacturing operation processes. The Government reserves the right to review the Contractor’s manufacturing procedures and processes. The

Contractor shall assure continuous identification, evaluation and timely resolution of manufacturing operations that adversely impact product quality, delivery, or performance. The

Contractor shall notify the Procuring Contracting Officer (PCO) immediately of anticipated contract delivery delinquencies, production difficulties or delays.

3.1.4.2 The Contractor shall conduct facility planning to ensure that the required production delivery schedule and rate can be met, considering the overall demand for facilities and personnel from other programs. The Contractor shall:

a. Determine the types of manufacturing processes and methods required and the associated tooling and test equipment requirements. Where required processes or equipment do not exist, the Contractor shall determine whether they will be developed or outsourced and shall identify appropriate schedules for design/purchase and installation.

b. Review sub-Contractor and vendor manufacturing management plans and production facilities to assure visibility into manufacturing management by production surveillance and identification, and management and resolution of problems that may adversely impact the program.

c. Identify manufacturing risks and strategies for their mitigation, using DoD 4245.7-M

Chapter 5.0 as guide.

d. Develop and layout the facility to ensure that machine loading, fabrication and assembly sequences and part routings minimize part in-transit and queue time.

http://www.acq.osd.mil/dpap/pdi/uid/

3.1.4.3 The Contractor shall conduct material planning to identify the types of materials and components needed for the construction of eCASS, considering producibility considerations and the availability of the material or parts.

3.1.4.4 The Contractor shall conduct work planning to determine and schedule work orders and purchase orders, parts and material procurement, part/component fabrication, evaluation, assembly, test, and delivery based on lead time, required delivery dates, inventory records, bills of material and available facilities and labor.

3.1.4.5 The Contractor shall institute production planning, scheduling and control processes.

Through the execution of its production scheduling and control processes, the Contractor shall monitor variances between actual and planned schedules, and shall use that feedback to identify and implement necessary corrective actions and to incorporate productivity improvements. The

Contractor shall notify the Defense Contract Management Agency (DCMA) of anticipated contract delivery schedule delinquencies, production difficulties, quality problems or delays which may adversely affect the program.

3.1.4.6 The Contractor shall provide facilities, equi