Solicitation Amendment N6264926RA0440009 SF 30.pdf
PDF 736 KB Posted
- Attached to
- USS HIGGINS (DDG 76) 7C1 BUNDLE 3
- Solicitation number
- N6264926RA044
About this file
This is Amendment 0009 to a federal solicitation (N6264926RA044) issued by NAVSUP Fleet Logistics Center Yokosuka for repair and alteration services on the USS HIGGINS (DDG 76). The amendment reopens the solicitation and extends the response due date from August 21, 2026 to December 21, 2026 at 10:00 AM Japan Standard Time. The period of performance has been revised to run from February 1, 2027 through September 7, 2027, with work to be performed at Yokosuka Naval Base in Japan. The contract will be a firm fixed-price award under a Master Agreement for Repair and Alteration of Vessels (MARAV), specifically either a Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR), with only active MSRA/ABR holders eligible for award. Offerors must have authorization to operate and do business in Japan per DFARS 252.225-7042.
The solicitation permits partial proposals on individual work items, with the government reserving the right to make single or multiple awards to one or more contractors. Seven Task Group Instructions (TGIs) are identified for specific repair and maintenance work. Pricing will be evaluated in Japanese Yen using the FY27 budget exchange rate of 153.2542 JPY per USD 1.00. Offerors must hold an active MSRA/ABR agreement by the proposal submission date and request access to work specifications via DoD SAFE by December 14, 2026. The government will evaluate proposals using a lowest-price technically-acceptable (LPTA) approach, with award intended without discussions, though the government reserves the right to conduct discussions if necessary. Key requirements include submission of completed pricing proposal forms, past performance information on no more than three contracts, and evidence of MSRA/ABR certification as part of the proposal package.
View the file
Other files
Show all 37
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
R
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES
2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBE
10B. DATED (SEE ITEM 13)
CODE FACILITY CODE
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
Block 14 (Description of Amendment/Modification):
The purpose of this amendment is as follows:
1. To reopen the solicitation and change the required response date and time.
2. To revise Section A.
3. To revise Section B.
4. To revise Section C.
5. To revise Section F.
6. To revise Section G.
7. To revise Section H.
8. To revise Section I.
9. To revise Section J. Canceled TGI 38KB313103-A01.
10. To revise Section K.
11. To revise Section L.
12. To revise Section M.
13. To distribute the revised Price Proposal Form (Attachment (II) Price Proposal Form N6264926RA044_REV2), GFP-GFM Listings (Attachment (IV) Government Furnished Property (GFP-GFM listings)_REV1), POP List (Att IX HIG_6C1_B3_POP_List), and CDRL (HIG_7C1_Bundle3=CDRL).
14. To distribute the SRF-JRMC_4730-141_(REV 00) and 4200.9J, CONTRACTING OFFICER'S CRANE OVERSIGHT PLAN.
All other information remains unchanged.
Section A - Solicitation/Contract Form
The following changes have been made:
INFORMATION FROM TO
Response Due Date 21 Aug 2026 21 Dec 2026
Miscellaneous text in this section has been modified to:
MASTER AGREEMENT FOR THE REPAIR AND ALTERATION OF VESSELS (MARAV): In the event the successful offeror possesses a Master Agreement for Repair and Alteration of Vessels (MARAV) with the U.S. Navy in the form of either a Master Ship Repair Agreement (MSRA) or an Agreement for Boat Repair (ABR), award for this requirement will be made in the form of a firm fixed price job order under the applicable agreement and all of the terms and conditions of the offer's existing MARAV will apply.
MSRA/ABR Number: ___________________
Firms who do not possess an active U.S MSRA/ABR as a Prime Contractor are ineligible for award. Non MSRA /ABR holders may request an application for an MSRA or an ABR certification by requesting an application package from: flcy_msra_abr_group@us.navy.mil. Please note that the MSRA/ABR Certification process may require a year to complete. This solicitation is intended only for sources duly authorized to operate and do business in Japan as prescribed by DFARS 252.225-7042.
1. REQUIREMENT: NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLCY) has a new requirement in support of the USS HIGGINS (DDG 76). The repair and maintenance package of work items are included as Attachment (I) Work Specification(s) for TGIs.
2. PERIOD OF PERFORMANCE: From 1 Feb 2027 to 7 Sep 2027
3. PLACE OF PERFORMANCE: Yokosuka Naval Base
4. OFFER: Offerors must provide all information required by this solicitation no later than 21 Dec 2026 at 10:00 AM Japan Standard Time (JST).
5. WORK ITEM INFORMATION: Access to the work specification package listed in Section J as Attachment (I) may only be accessed through DoD SAFE. DoD SAFE is a secure U.S. Government repository which enables the sharing of large files and requires outside users to receive a drop-off request from the U.S. Government. Therefore, any offeror intending to provide a proposal to this solicitation shall request access by sending an email to: risa.sakurai.ln@us.navy.mil, peterjommel.s.arrieta.ln@us.navy.mil by 14 Dec 2026 10:00 AM JST. Once the U.S. Government receives the offeror's access request, the U.S. Government will provide the offeror with a link and instructions to retrieve Attachment (I). Offerors shall note that access is only available for 14 days once sent.
6. PARTIAL PROPOSALS AUTHORIZED:
N6264926RA0440009
Offerors are hereby notified that this solicitation permits the submission of partial proposals. The Government reserves the right to make single or multiple awards on a Work Item-by-Work Item basis to one or more responsible contractors, or to make single or multiple awards under this solicitation for the entire scope, whichever is determined to be in the best interest of the Government. Any Work Items that receive no bids may be descoped or re-solicited independently without invalidating, delaying, or otherwise affecting the evaluation and award of the remaining items.
Detailed submission and evaluation criteria regarding partial proposals are set forth in Sections L and M of this solicitation.
This solicitation is intended only for sources duly authorized to operate and do business in Japan, as prescribed by DFARS 252.225-7042.
Section B - Supplies or Services & Prices or Costs
Miscellaneous text in this section has been modified to:
*Note 1: The labor hours and material requirements listed under the Growth CLIN are part of the contract. Prime contractor efforts will be deducted from the labor hours allocated. Subcontractor efforts and materials will be deducted from the materials allocated. When it is evident that no additional growth work will be tasked under the contract, all remaining unauthorized balance of labor hours and materials in the Growth CLIN will be recouped by the ACO through a contract modification as a decrease in price, which will be a final settlement for all LOE to Completion labor hours and material dollars. Once the number of labor hours and materials for directed work has been settled, neither party shall be entitled to an adjustment because the expended labor hours and materials differ from the settled price. This shall not preclude an adjustment otherwise permitted by law and regulation; e.g. fraud, product substitution, defective workmanship or materials.
The following CLIN(s) / SLIN(s) / ELIN(s) were modified:
INFORMATION FROM TO
Description
The Contractor shall accomplish the work specification package requirements listed in ATTACHMENT (I) of Section J onboard USS HIGGINS (DDG 76) during FY26 Chief of Naval Operations (CNO) 6C1. The contractor is required to submit an itemized breakdown of the total price proposal using ATTACHMENT II Price Proposal Breakdown Sheet provided in Section J.
Failure to properly complete and submit ATTACHMENT (II) by the specified closing date may cause rejection of the proposal. Note: The U.S. Dollar amounts shown are for the Government administrative purpose only. FY26 Budget Exchange Rate of JPY
150.4415 per USD 1.00 applies.
The Contractor shall accomplish the work specification package requirements listed in ATTACHMENT (I) of Section J onboard USS HIGGINS (DDG 76) during FY27 Chief of Naval Operations (CNO) 7C1. The contractor is required to submit an itemized breakdown of the total price proposal using ATTACHMENT II Price Proposal Breakdown Sheet provided in Section J.
Failure to properly complete and submit ATTACHMENT (II) by the specified closing date may cause rejection of the proposal. Partial bids/proposals are authorized. Offerors may submit pricing for any single work item, combination of work items, or the complete work specification package listed in ATTACHMENT (I). An offeror is not required to bid on all work specification items; however, bids submitted for less than the complete scope of any individual work specification item will be rejected as non-responsive. The Government reserves the right to make one award, multiple awards, or no award across the items listed in ATTACHMENT (I)."NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.Note: The U.S. Dollar amounts shown are for the Government administrative purpose only. FY27 Budget Exchange Rate of JPY
153.2542 per USD 1.00 applies.
INFORMATION FROM TO
Description
Growth Reservation associated with CLIN 0001. This growth CLIN amount represents 8.71 percent of the total proposed cost for CLIN 0001. Note: The U.S.
Dollar amounts shown are for the Government administrative purpose only. FY26 Budget Exchange Rate of JPY 150.4415 per USD 1.00 applies.
Growth Reservation associated with CLIN 0001. This growth CLIN amount represents 8.70 percent of the total proposed cost for CLIN 0001. The percentage (%) established under CLIN 0002 shall be adjusted proportionally, based upon the total number of Task Group Instructions (TGIs) proposed by the Offeror in response to this solicitation.Note: The U.S. Dollar amounts shown are for the Government administrative purpose only. FY27 Budget Exchange Rate of JPY
153.2542 per USD 1.00 applies.
Section C - Description/Specifications/Statement of Work
C-1.0 : General Requirements The Contractor, under the direction of the U.S. Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC) as an independent Contractor and not as an agent of the Government, shall furnish the material, support (electrical, crane, rigging, etc.) and facilities (except those furnished by the Government under express provisions of this contract) and provide the management, technical, procurement, production, testing and quality assurance necessary to prepare and accomplish the repairs and maintenance required to complete the in accordance with the requirements USS HIGGINS (DDG 76) 7C1 stated in this Section, the Work Item Specifications / Task Group Instructions (TGIs) and Work Item Plans, Drawings, and Other References, the Delivery Schedule, and all other terms and conditions set forth in this contract.
C-1.1 Technical Description and Specifications: The work to be performed hereunder shall conform to the description of work /work specification described in Section B. The Contractor shall accomplish the contract requirements listed in Attachment (I) of Section J. Actual physical shipboard work shall begin and end in accordance with the dates listed in Section F of this solicitation.
C-1.2 Applicable Reference Documents: The Contractor shall accomplish all work in accordance with applicable NAVSEA Standard Items (NSIs) and SRF-JRMC Local Standard Items (LSIs). SRF-JRMC will determine which NSIs and LSI versions are applicable for all Chief of Naval Operations (CNO) availabilities to include Selected Repair Availability (SRA), Docking SRA (DSRA), and Extended DSRA (EDSRA); Continuous Maintenance Availability (CMAV); Emergent Maintenance (EM); and Surface Incremental Availability (SIA) scheduled for each ship. The same version continues to apply until the completion of each availability and maintenance regardless of whether the work crosses fiscal years.
CATEGORY-I items are invoked for all work resulting from this solicitation under the Master Agreement for Agreement for Repair and Alteration of Vessels; Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR). CATEGORY-II items are invoked only to the extent specifically indicated within Attachment (I). Ship repair contractors are also subject to the applicable laws and regulations of the Host Nation.
Category I NAVSEA Fiscal Year Standard Items are applicable to all items without further reference. Category II 2026 (FY26) CH1 NAVSEA Standard Items are applicable when invoked and/or referenced in individual Task Group Instruction (TGI) FY26 CH1 specified in Attachment (I). NSIs may be found at:
https://www.navsea.navy.mil/Home/RMC/CNRMC/Our-Programs/SSRAC/
Category I U.S. Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC) Local Standard Items (LSI), FY26 SRF- JRMC LSI is applicable to all items without further reference. Category II SRF-JRMC LSI is applicable when FY26 FY26 invoked and/or referenced in individual TGIs specified in Attachment (I). LSIs and subsequent Changes have been distributed to FY26 all MSRA/ABR holders. Please refer to Section A of this Solicitation when requesting copy of these references.
C-1.3 The contractor is to coordinate the delivery and/or pick-up of all Government Furnished Government Furnished Material:
Material (GFM) as cited in work specification(s), supporting drawings, references and/or Statement of Work (SOW). The Contractor is required to manage all GFM upon receipt which includes monitoring, inspecting, segregating, determining nonconformance, and returning unused or nonconforming material o the Government for final disposition.
C-1.4 : The Contractor shall accomplish planning and scheduling to ensure a rational, integrated Contractor Furnished Material and timely plan for procurement, receipt, storage and installation of Contractor Furnished Material (CFM). All materials must meet the specified standard military performance specifications, Federal performance standards, and may require to be listed on a Qualified Products List (QPL) for shipboard installations.
C-1.5 : The Contractor is required to submit a production schedule encompassing, to the Integrated Production Schedule maximum extent possible, all contractor work requirements to the Government at the following milestones:
(1) Work Package Execution Review;
(2) Start of the Availability;
(3) 25% complete conference;
(4) 50% complete conference;
(5) 75% complete conference;
N6264926RA0440009
https://www.navsea.navy.mil/Home/RMC/CNRMC/Our-Programs/SSRAC/
(6) Production Completion Date (PCD);
(7) Work Completion;
(8) Pre-Sea Trials requirements.
C-2.0 : Availability Preparation and Meeting Participation The Contractor, under the direction of SRF-JRMC shall complete the following efforts after contract award in preparation to execute the ship's availability. The Contractor shall include meetings attendance as part of their fully-burdened ship repair labor rates.
(a) The contractor shall attend and support the Integrated Project Team Development (IPTD) Work Package Integration Conference (WPIC) as needed prior to the scheduled availability. The contractor shall support the conference by evaluating the Availability Work Package and pinpointing work requirements or issues that conflict, prevent or impact other work items from being accomplished.
(b) The contractor shall conduct final ship-checks and coordination with assigned Zone Managers (ZMs) and Work Integration Managers (WIMs) who will liaison with the project team.
(c) The contractor shall attend and support the IPTD Work Package Execution Review (WPER) and Schedule Model Review (SMR) events as needed prior to availability. The contractor shall support the mandated conference executed during planning period leading up to execution of an availability to review work, schedule, and ensure material and resource availability.
(d) The contractor shall support the early start period of availability at the time of award. Contractor is required to begin work and therefore needs time to coordinate and stage materials and equipment prior to starting the physical work.
(e) The contractor is required to order all long lead time structural materials some of which has long duration for fabrication and shipping from United States manufacturers.
(f) The contractor is required to ensure the schedule is submitted to the project team in order to integrate with existing project schedule and mitigate risks due to space/location constraints to avoid work stoppages.
C-3.0 : Identification of Condition Found In accordance with the requirements of NSI 009-01, the Contractor shall identify needed repairs and recommend corrective action during contract performance for work/deficiencies discovered which are not covered by the existing work package. For conditions that impact the critical path(s) /controlling item(s), the Contractor shall notify the Government via electronic media within 24-hours of discovery. This initial notification need not include all content required for a Condition Found Report (CFR), but must include a description of the condition/deficiency and an estimated timeframe for the offeror's professional recommendation for resolution, which shall not exceed five (5) working days as specified below. Recommended repairs and corrective actions shall be submitted to the Government in the form of a CFR (intended to represent the "Work Request" described in DFARS 252.217-7028 "Over and Above Work").
C-3.1 : Condition Found Notification to Government Submit all CFRs to SRF-JRMC within five (5) working days of discovery of the condition. Submissions shall be made via electronic mail (email) using the CFR Form (SRF-JRMC 4730-141) to: cfrinboxsrfyoko2@us.navy.mil.
Each CFR must be attached to the email in both Excel (.xlsx) and PDF formats. The email subject line shall be formatted strictly as follows: [SHIP
NAME] - [CONTRACT NUMBER] - CFR [CFR NUMBER].
At a minimum, the CFR must include the following:
(1) Identify contract, ship, and hull number
(2) Identification of the applicable TGI number
(3) Date requirement was discovered
(4) Description of the work requirement
(5) Specific location of the work
(6) Recommendation for corrective action
(7) Recommendation for the appropriate/best time to accomplish the work (i.e. during current availability with or without schedule change, future CNO or Continuous Maintenance Availability). Provide supporting rationale for the recommendation, such as cost efficiencies, availability of work force, availability of material, premium expenditures, etc.
(8) Identification of related changes, if any, to the internal milestones and production and contract completion dates.
C-3.2 :Government Review and Response to CFR The Maintenance Team will review the CFR. If the CFR is inadequate or incomplete, it will be rejected with time continuing to accrue (relative to five (5) working day requirement). As appropriate, the Government and contractor shall meet and discuss the recommendation for corrective action further, conducting ship checks as
N6264926RA0440009
mailto:cfrinboxsrfyoko2@us.navy.mil necessary, to determine the full scope of work required prior to final approval of the CFR. Accuracy of CFR submissions may be evaluated in CPARS and utilized for past performance ratings on future requirements.
C-4.0 Descoping of Requirements: The Government reserves the right to descope any requirement under this contract at any time and for any reason. Descopes are incorporated into the contract via Deficiency List (DLs) and can either be a partial deletion of paragraph(s) from the work specification or deletion of a work item in its entirety. The Government will rely on the fully burdened labor rates for negotiating and settling descope DLs. At no time may the Contractor amend entered in Section H-6.0 GROWTH CLIN its pricing for full or partial work deletion.
C-4.1 : Descope DLs The Contractor agrees to price descope DLs at the same labor rate proposed in the original award. Partial or full work item deletion from the original work item or TGI will be processed via the usual contract modification process. Partial or full work item deletion from the settled Growth Management Request (GMR) will be processed as a descope GMR.
C-4.2 : Minimum Technically Required (MTR) repairs deletion MTR refers to the anticipated repairs that could not be clearly defined at the start of availability but were included in the TGI (based upon historical analysis published by Commander Navy Regional Maintenance Center and NAVSEA Contracting) to enable the Contractor to proceed with the work efficiently, if necessary.
In certain instances where the ship's condition were found satisfactory after a thorough inspection, these MTR repair are cancelled and descoped before the end of the availability. As a result of the deletion of work, the Contractor is expected to return the awarded costs in full. The Contractor must be able to demonstrate production cost and provide justification of work incurred to the Administrative Contracting Officer if the proposing cost is different from the awarded amounts. Program management, idle time not worked and other indirect costs will not be considered.
C-5.0 : DELAYS / DISRUPTIONS The Contractor shall coordinate the work effort with SRF-JRMC Project Manager on a daily basis to prevent changing situations from causing delays and disruptions. Disruption due to minor delays in obtaining access to spaces and operation of equipment are to be expected. A minor delay is defined as eight clock (8) hours or less in duration (and is not the cumulative effect of labor hour impact). Minor delays and/or disruptions are considered normal rather than unusual occurrences during the performance of tasks ordered under the resulting contract. The Government will not provide any schedule relief for minor delays /disruptions.
C-6.0 REQUIREMENTS FOR CONTRACTOR OPERATED CRANES AND WEIGHT HANDLING EQUIPMENT:
In accordance with NAVSUP FLC Yokosuka Instruction 4200.9J (NAVSUPFLCYINST 4200.9J), "CONTRACTING OFFICER'S CRANE OVERSIGHT PLAN" (dated 8 Feb 2023) and its primary references, the Contractor shall comply with all safety, oversight, and operational regulations for the explicit or incidental use of non-Navy owned cranes, Weight Handling Equipment (WHE), and materials handling equipment used to lift suspended loads.
Because this requirement is in support of SRF-JRMC Yokosuka, the Contractor shall strictly comply with the specific crane oversight and operational provisions set forth in SRF-JRMC LSI 099-903YO, "Requirements for Contractor Cranes, Multi-purpose Machines and Material Handling Equipment at Naval Facilities; accomplish".
As mandated by NAVSUPFLCYINST 4200.9J, translated copies of Enclosure (3) - Contractor Crane Operation Checklist and Enclosure (4) - Certificate of Compliance are incorporated into this contract. The Contractor is required to review, complete, and submit these documents as part of their crane operational procedures. The complete, unclassified NAVSUP FLC Yokosuka instruction, including Enclosure (3) and Enclosure (4), are incorporated into this solicitation under Section J as an Attachment.
C-7.0 SECURITY REQUIREMENTS
INSTALLATION
The Contractor and all associated personnel shall comply with the application requirements delineated in COMFLEACT YOKOSUKA INSTRUCTION 5700.1 (CFAYINST 5700.1) to conduct business within the Commander, Fleet Activities (FLEACT) Yokosuka jurisdiction. The Contractor shall submit all installation access applications to the FLEACT Yokosuka Visitor Control Center (VCC).
The Contractor shall ensure all personnel are registered in the Defense Biometrics Identification System (DBIDS) via the VCC. When authorized by the Government, access will be designated as unescorted, escorted, or trusted traveler. Contractor personnel access times to the installation shall be restricted to 0500 through 2359. Except as otherwise noted, all passes are issued through DBIDS. Personnel requiring access for 31 days or more shall be issued DBIDS cards. Personnel requesting access for 60 days or fewer shall be issued paper passes. The Contractor shall direct any questions, administrative issues, or security concerns regarding the installation access and badging process to the FLEACT Yokosuka VCC office.
REGISTRATION AND DE-REGISTRATION PROCEDURE
1. Upon acceptance of any contract renewal or subsequent purchase orders, the Contractor shall immediately confirm its active registration status with the FLEACT Yokosuka VCC.
2. The Contractor shall immediately notify the FLEACT Yokosuka VCC in writing of any changes to company details, to include change of company name, address, corporate officials, or personnel who no longer require installation access.
3. Upon expiration or termination of a valid contract or purchase order, the Contractor's registration status shall be automatically terminated. All associated access passes shall expire immediately.
4. Following contract expiration or de-registration, the Contractor shall immediately return all issued access passes to the FLEACT Yokosuka VCC. Failure to return passes shall result in the responsible individuals, the Contractor, or both being placed on the installation access denial list.
5. The Contractor may voluntarily request company de-registration at any time by submitting a written request and returning all issued access passes to the FLEACT Yokosuka VCC.
SECURITY REQUIREMENTS FOR PERSONNEL HAVING ACCESS TO U.S. NAVAL FORCES/NAVY REGION JAPAN
INSTALLATIONS
In accordance with COMNAVFORJAPAN/COMNAVREGJAPAN INSTRUCTION 5500.7, all non-exempt Contractor personnel requiring installation access shall be subject to comprehensive security and background screening. Appropriate security and background checks will be conducted utilizing any available resources, on all Contractor employees requiring access within FLEACT Yokosuka or its jurisdiction. The Contractor shall submit all prescribed documents (listed below) to the Government to facilitate the required security checks for all personnel requesting access.
a. Required documents pertaining to Japanese Nationals who are not specifically exempted:
(1) One copy of the Personal History Statement.
(2) Valid and accepted proof of residency (i.e., passport, resident alien card or GoJ Alien Registration) in accordance with local policy.
(3) Valid and accepted proof of ID in accordance with local policy (i.e., driver's license).
(4) One copy of SECNAV Form 5512/1.
b. Required documents pertaining to U.S. citizens who are not specifically exempted:
(1) One copy of the SECNAV Form 5512/1.
(2) Proof of current and valid visa/residency status.
(3) Valid and accepted proof of identification per USFJ Instruction 31-206.
c. Third Country Nationals who are not specifically exempted or addressed as designated Third Country Nationals in USFJ Instruction 31-204:
(1) One copy of the Statement of Personal History.
(2) Proof of current and valid visa/residency status.
(3) Valid and accepted proof of ID in accordance with reference (c).
(4) One copy of SECNAV Form 5512/1.
Investigative and security agencies may occasionally require additional documentation or information to complete background checks.
Upon notification by the appropriate security agency, the Contractor, or individual Contractor employee shall promptly provide all requested documentation and information to facilitate the security review process.
SRF-JRMC SECURITY
Per NAVSHIPREPFAC M-5500.1, all visitors entering SRF-JRMC spaces must check-in with the C1110 security office to receive visitor badges as applicable. Foreign nationals who fall outside of the Master Labor Agreement are not authorized to access, generate, or destroy CUI information or materials. Access to classified information or systems is not authorized for foreign nationals at SRF-
JRMC.
Per NAVSHIPREPFAC Yokosuka M- 5239.3, access to the SRF network or other command IT systems requires the member to possess a valid clearance, verified need-to-know, and a CAC. As such, foreign national contractors who do not meet the above criteria are not authorized to access SRF systems.
SHIPBOARD ACCESS REQUIREMENTS
The Contractor shall comply with all current Senior Officer Present Afloat (SOPA) directives and OPNAVINST 5530.14 requirements for all personnel requiring access to U.S. Navy vessels moored or stationed within the installation.
The Requirements text has been modified to:
USS HIGGINS (DDG 76) 7C1 BUNDLE 3
Section F - Deliveries or Performance
The delivery information for the following CLIN(s) / SLIN(s) / ELIN(s) were modified:
INFORMATION FROM TO
Period of Performance 14 Dec 2026 to 20 Jul 2027 01 Feb 2027 to 07 Sep 2027
Place of Performance - N62758 - SRF AND JRMC YOKOSUKA
INFORMATION FROM TO
Delivery Delivery Period PeriodStart = 14 Dec 2026. PeriodEnd = 20 Jul 2027.
Delivery Period PeriodStart = 01 Feb 2027. PeriodEnd = 07 Sep 2027.
INFORMATION FROM TO
Period of Performance 14 Dec 2026 to 20 Jul 2027 01 Feb 2027 to 07 Sep 2027
Place of Performance - N62758 - SRF AND JRMC YOKOSUKA
INFORMATION FROM TO
Delivery Delivery Period PeriodStart = 14 Dec 2026. PeriodEnd = 20 Jul 2027.
Delivery Period PeriodStart = 01 Feb 2027. PeriodEnd = 07 Sep 2027.
Miscellaneous text in this section has been modified to:
F-1.0 Time of Performance: The Government has established execution dates for the following milestones and key events as outlined below:
Contractor Work Start Date: 1 Feb 2027
Contractor Work Completion Date: 7 Sep 2027
The Contractor shall accomplish the work within the Period of Performance (POP) listed in each Task Group Instruction (TGI). A POP extension will only be issued if the POP for any individual TGI exceeds the Contractor Work Completion Date listed above.
F-2.0 Place of Performance: The performance of all work set forth in SECTION B shall be accomplished aboard the vessel at .Yokosuka Naval Base
Section G - Contract Administration Data
Additional Information/Notes
The following clauses were added:
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Tailored) (Dec 2022)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.
WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
N/A
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
Invoice 2in1
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.
when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC HQ0339
Issue By DoDAAC N62649
Admin DoDAAC N62649
Inspect By DoDAAC ____
Ship To Code N62758
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) N62758
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
Miyuki Hiwatari (miyuki.hiwatari.ln@us.navy.mil), Kayo Oobayashi (kayo.oobayashi.ln@us.navy.mil)
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
The following clauses were deleted:
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Dec 2022)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.
in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
Invoice and Receiving Report (Combo)
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
N/A
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.
WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC HQ0907
Issue By DoDAAC N62649
Admin DoDAAC N62649
Inspect By DoDAAC ____
Ship To Code N62758
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) N62758
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
Miyuki Hiwatari (miyuki.hiwatari.ln@us.navy.mil), Kayo Oobayashi (kayo.oobayashi.ln@us.navy.mil)
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Section H - Special Contract Requirements
H-1.0 OCCUPATIONAL AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT (29 CFR 1915)
The Contractor shall fully comply with 29 Code of Federal Regulations Part 1915, Occupational and Health Standards for Shipyard Employment (29 CFR 1915), as it is effective at the date of contract award, while performing any contract that is awarded from this solicitation. The provisions of 29 CFR 1915 shall apply to the same extent as if the ship repairing, shipbuilding, and shipbreaking employments and related employments to be performed under the contract are wholly accomplished on the navigable waters of the United States. The Contractor shall comply with applicable provisions of the laws and regulations where the ship repairing, shipbuilding, and shipbreaking employment and related employments are performed in addition to complying with the corresponding provisions of 29 CFR 1915 in instances in which those laws and regulations require compliance with more stringent safety standards.
The Contractor shall promptly notify the contracting officer if it becomes aware of any law or regulation that is applicable where the ship repairing, shipbuilding, and shipbreaking employment and related employments are performed that precludes compliance with any provision of 29 CFR 1915.
H-2.0 EXTENSION OF COMMERCIAL WARRANTY (NAVSEA) (NOV 1996)
The Contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale, provided that such warranty is available at no additional cost to the Government. The Contractor shall provide a copy of the standard commercial warranty with the item. The standard commercial warranty period shall begin upon the final acceptance of the applicable material or software. Acceptance of the standard commercial warranty does not waive the Government's rights under the "Inspection" clause, nor does it limit the Government's rights with regard to other terms and conditions of the contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty.
H-3.0 CONTROL OF UNCLASSIFIED INFORMATION (SRF-JRMC Requirements Only)
The Contractor shall not provide Controlled Unclassified Information (CUI) U.S. Navy technical information (engineering drawings, technical manuals, system or equipment photographs or any other U.S. Navy engineering data in any form (orally, paper copy, film or digital file/image) to anyone except SRF-JRMC employees, other Department of Defense (DoD) employees or U.S. DoD Contractors requiring the data for accomplishment of an SRF-JRMC business processes unless the data is marked Distribution Statement "A" (Approved for public release: distribution is unlimited) or has been approved for unrestricted public release by the Commanding Officer of SRF-JRMC or Commander U.S. Naval Forces Japan (COMNAVFORJAPAN) Public Affairs Officer (PAO). The Contractor shall notify SRF-JRMC Code 700 (Code 950 in Sasebo) and request written permission to release CUI outside of SRF- JRMC, DoD Activities or U.S. DoD Contractors that are not involved in the SRF-JRMC business process if the Contractor believes that the release is required to support a SRF-JRMC business or Public Affairs requirement.
H-4.0 Lay Down Space
The Contractor may request the lay down space adjacent to the ship yard in Yokosuka Naval base. Upon the receipt of approval by the Government, the Contractor may obtain the applicable lay down space. The Contractor shall be responsible for all the cost, but not limited to, for maintaining the facility, utility, safety, and security.
H-5.0 Applicable to Contracts Performed in Japan:
HISTORIC AND CULTURAL RESOURCES
If ship repair work is being performed in and around potentially significant historic buildings and structures (cultural properties) such as Dry Docks 1 through 6 and Cave 682 in Yokosuka Base, the contractor shall avoid changing the original materials and finishes used in the properties.
If work is being performed to repair or change a historical building/structure, the contractor shall submit design drawings, floor plans, and other relevant operational details to the CFAY Cultural Resource Manager through the Contracting Officer for review and approval prior to the commencement of work.
If work is being performed on a cultural or historical asset, such as a historical building/structure or archeological site, special precautions may be necessary. The contractor shall submit design drawings, floor plans, and other relevant operational details to the CFAY Cultural Resource Manager through the Contracting Officer for review and approval prior to the commencement of work. The contractor shall contact the CFAY Cultural Resources Manager through the Contracting Officer to determine if the work involves any archaeological, historical or cultural assets.
The contractor must conduct an archaeological monitoring by a qualified archaeologist for the planned excavations. During the monitoring, use of flat bladed bucket is required for backhoe operations. If any cultural/historical artifacts/assets include brick structures, manufactures plates indicating years before 1945 on the machines and equipment are discovered during work, the contractor shall notify the Public Works Department (PWD) Environmental Cultural Resources Manager Environmental Branch Cultural Resources Manager (DSN 243-5136/COMM 046-816-5136) through the Contracting Officer, secure the discovery area, and continue to work around the secured area until further direction from the PWD Environmental Cultural Resources Manager Environmental Branch Cultural Resources Manager through the Contracting Officer.
If the items need to be temporarily removed, carefully protect them from disturbance, including weather conditions, unforeseen traffic, and pilfering. The PWD Environmental Cultural Resources Manager Environmental Branch Cultural Resources Manager through the Contracting Officer will provide further direction/guidance on how to protect the items. The Government retains ownership and control over historical and archaeological resources.
The contractor shall carefully protect in-place and report immediately to the Contracting Officer historical and archaeological items or human skeletal remains discovered in the course of work. Upon discovery, the contractor shall notify Cultural, Historical, and/or Natural Resources (CHNR) Manager (DSN 243-5136/COMM 046-816- 5136) through the Contracting Officer, secure the discovery area, and continue to work around the secured area. The Government retains ownership and control over historical and archaeological resources."
JAPANESE CONCILIATION PROCEDURES
(a) Except as otherwise provided in this contract any disagreement arising under this contract which is not resolved by the parties to this contract may be submitted to the US-Japan Joint Committee for conciliation in accordance with paragraph 10, Article XVIII, of the Status of Forces Agreement under Article VI of the Treaty of Mutual Cooperation and Security between Japan and the United States of America. Request by the Contractor for conciliation shall be made in accordance with the procedures provided herein.
(b) In the event the Contractor desires conciliation after the decision of the Contracting Officer has been served upon him, he will first file his appeal from such findings of fact within the time limits described therein before filing request for conciliation with the Joint Committee and then request for appellate authority under the clause of this contract entitled Disputes to suspend its action on his appeal until such time as the Joint Committee has had an opportunity for effecting conciliation.
(c) The request for conciliation will be submitted by the Contractor through the nearest local Japanese Defense Facilities Administration Bureau to the Contract Conciliation Panel of the Joint Committee. Upon the filing of the request with the Joint Committee, the Contractor will immediately notify the Contracting Officer in writing that the request for conciliation has been filed.
(d) In the event the disagreement submitted to the Joint Committee under subparagraph (b) above has been resolved through conciliation, it will be the responsibility of the Contractor to notify the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .