J-1502000 (Amend 0005).pdf

DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

Table Of Contents

Attachment Number Attachment Title

J-1502000-01 Definitions and Acronyms

J-1502000-02 References and Technical Documents

J-1502000-03 Facility Listing

J-1502000-04 Systems Description – Facility Service Matrix - Facility Investment Assets

J-1502000-05 Historical Anticipated Annual Service Order Data

ATTACHMENT J-1502000-01

DEFINITIONS AND ACRONYMS

DEFINITION DESCRIPTION

EQUIPMENT, COLLATERAL Encompasses built-in and large substantially affixed equipment/property that is normally acquired and installed as part of a facility project.

EQUIPMENT, INSTALLED Encompasses building-type equipment, built-in equipment, and large, substantially affixed equipment/property, and is normally acquired and installed as part of a facility project. Installed equipment is normally required to make a facility useful and operable. Removing such equipment would impair the usefulness, safety, or environment of the facility or the facility restoration work required after its removal, is substantial.

EQUIPMENT, PERSONAL

PROPERTY

Personal property equipment includes all equipment other than collateral equipment. Such equipment, when acquired and used in a facility or a test apparatus, can be severed and removed aster erection or installation without substantial loss of value or damage thereto or to the premises where installed.

FACILITIES LIFE CYCLE A facilities life cycle is divided into four stages, requirements (planning and design), acquisition (construction and acceptance), stewardship (operations, maintenance and repair), and disposal.

FACILITIES MAINTENANCE

MANAGEMENT

The planning, prioritizing, organizing, controlling, reporting, evaluating, and adjusting of facilities maintenance operations to support the CNO/NAVFAC facilities policy and objectives and satisfy customers’ facility needs. Defined by the International Facility Management Association as “the practice of coordinating the physical workplace with the people and work of the organization.”

INTEGRATED

MAINTENANCE PROGRAM

(IMP)

IMP is a recurring state-of-the-art, reliability-centered inspection, testing, maintenance and repair program that determines best practices for managing the functions and consequences of failures of facilities equipment and system components. IMP encompasses accepted commercial practices, including reactive, preventive, predictive and proactive maintenance, into one optimal program. The IMP approach gives the Contractor full responsibility to maintain systems and equipment and perform repairs whenever necessary to ensure equipment and systems are operational and remain in a constant state of readiness. Service calls will not be issued for accomplishment of repairs on systems and equipment maintained under IMP.

LIFE-CYCLE COSTS A form of economic analysis that considers the total cost of owning, operating, and maintaining a building or system over its useful life.

MAINTENANCE,

PREVENTIVE

Maintenance designed to increase the availability of the facilities/equipment by reducing the number of unexpected breakdowns or service interruptions. It is any planned maintenance activity that improves equipment life and avoid any unplanned maintenance requirements.

MANAGEMENT

INFORMATION SYSTEMS-

MAINTENANCE

A computerized system that will provide sufficient information for management to evaluate differences between budgets and actual costs and evaluate performance.

REPAIR Repair is the restoration of facilities or equipment to such a condition that it may be effectively utilized for its designated purposes by overhaul, reconstruction, or replacement of constituent parts or materials which have deteriorated by action of the elements or usage, and which have not been corrected through maintenance. This term also applies to replacement of the entire unit or system if beyond economical repair. The intent of repair is to have the equipment at normal working condition.

REPLACEMENT Replacement, as a distinct work element, is confined to a program of planned replacement of a facility or its components. It may be further limited to major components such as air conditioning compressors, furnaces or hot water heaters. Replacement is performed when the equipment has reached the end of its useful life; when it no longer can perform due to degradation of its internal components and repair is no longer cost effective. Included under the replacement would be the major rebuilding of any component, since rebuilding also restores performance.

RESTORATION Restoration of real property to such a condition that it can be used for its intended purpose. Includes repair or replacement work to restore facilities damaged by inadequate sustainment, excessive age, natural disaster, fire, accident or other causes.

SUSTAINMENT Maintenance and repair activities necessary to keep a typical inventory of facilities in “normal working condition”. Sustainment includes regularly scheduled maintenance as well as cyclical major repairs or replacement of components that occur periodically over the expected service life of the facilities.

SERVICE ORDER Any work required to return a facility, system, equipment or component to normal working condition. Service orders are minor facility problem requests or requests for other non-recurring work that is too small to be planned and estimated.

The purpose of a service order is to provide the Government with a means of issuing work up to a defined liability limit for requirements occurring outside of the specified recurring work. The Government may utilize service orders to accomplish any work up to the respective liability limit based on the service order classification.

SERVICE ORDER CYCLE Count down starts when the customer is notified that the work has been accepted to be accomplished to the time when the work chit is turned in by the craftsmen as complete is one complete cycle period for a service order.

SERVICE ORDER,

EMERGENCY

Emergency is defined as any facility deficiency that immediately compromises the mission or life, health and safety. Always includes, but is not limited to, failure of any utility, fire protection, environmental control, or security alarm systems.

SERVICE ORDER, URGENT Urgent is defined as any deficiency that does not immediately endanger personnel or property, but extended delays of repairs could result in damage to Government property, or soon affect the security, health, or well-being of personnel or the continued operation of a service or system.

SERVICE ORDER, ROUTINE Routine is defined as any work requirement within the defined LOL that does not qualify as emergency or urgent.

WEIGHT HANDLING

EQUIPMENT (WHE)

Weight handling equipment consists of cranes (e.g., portal cranes, jib cranes), rigging gear (e.g., slings, shackles), and associated equipment (e.g., portable hoists, dynamometers). For purposes of this technical sub-annex, WHE does not include mobile or transportable truck, crawler, and railway mounted locomotive cranes covered in 1700000

BSVE.

Acronym Title BPVC Boiler and Pressure Vessel Code HVAC Heating, Ventilation, and Air Conditioning RPIE Real Property Inventory Equipment SCADA Supervisory Control And Data Acquisition SRM Sustainment, Restoration and Modernization UFC Unified Facilities Criteria UPV Unfired Pressure Vessel VTE Vertical Transportation Equipment

Attachment J-1502000-02

REFERENCES AND TECHNICAL DOCUMENTS

Reference Title NAVFAC P-307 Management of Weight Handling Equipment NFPA 780 Standard for the Installation of Lightning Protection Systems

MIL-HDBK-419 Grounding, Bonding, and Shielding for Electronic Equipment and Facilities

MIL-STD-188-124B Grounding, Bonding and Shielding NAVFAC MO-912 Operation, Maintenance and Repair of Auxiliary Generators NAVFAC MO-230 Petroleum Fuel Facilities NAVSUPINST 4750.1 Automated Fuel Maintenance System NAVSUP P-558 Fuel Management Ashore

NFPA Standard 96 Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations

NAVSEA OP-5 Ammunition and Explosive Safety Ashore

TM 5_692_1

Department of the Army TM 5-692-1, Maintenance of Mechanical and Electrical Equipment at Command, Control, Communications, Intelligence, Surveillance, and Reconnaissance (C4ISR) Facilities - Recommended Maintenance Practices, 15 April 2001

SECNAV M-5510.36 Department of the Navy (DON) Information Security Program (ISP) Manual, 30 June 2006.

FF-L-2740B Locks, Combination, Electromechanical https://www.navfac.navy.mil/content/dam/navfac/Specialty%20Centers/Engineering%20and%20Expeditionary%20Warfare%20Center/DoD_Lock_Program/PDFs/SECNAV-5510-36.pdf https://www.navfac.navy.mil/content/dam/navfac/Specialty%20Centers/Engineering%20and%20Expeditionary%20Warfare%20Center/DoD_Lock_Program/PDFs/FF-L-2740.pdf

ATTACHMENT J-1502000-03

FACILITY LISTING

Facility No. Facility Description SF (Approx.)

27130 A Visitor Control Center (VCC) 3,500 27130 B RKB - Main Building 800,000 27130 C ADN (Communications Node) 400 27131 Parking Garage 150,000 27130 ECP Entry Control Point 3,500 - under the canopy Ammunition Magazine Ammunition Magazine 500

ATTACHMENT J-1502000-04

Systems descriptions, Facility Service Matrix, Facility Investment Assets

Refer to separate Excel file: “J-150204000 Systems descriptions - Facility Service Matrix - Facility Investment

Assets.xls”

ATTACHMENT J-1502000-05

Historical Anticipated Annual Service Order Data

Service Order Estimated Annual Quantity

Emergency 6 Urgent 12 Routine 840

ATTACHMENT J-1502000-01