Amendment_0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See Summary of Changes.

1. CONTRACT ID CODE PAGE OF PAGES

1 33

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-Mar-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6134019R0007

X 9B. DATED (SEE ITEM 11)

28-Jan-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-Mar-2019

CODE

NAWCTSD 253

CODE 2.5.3.7

12211 SCIENCE DRIVE

ORLANDO FL 32826-3224

N61340 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6134019R0007

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The following have been added by full text:

DESCRIPTION OF AMENDMENT 0003

The purpose of Amendment 0003 is to:

1. Update Section B, B-1 Extended CLIN Description, for CLIN 0X04 to clarify the Peculiar Support Equipment requirement under CLIN 0004 and 0104.

2. Revise the Section C, C-3 PWS, to update the CLIN associated with PWS paragraph 3.1.5, from 0002 to 0X01.

3. Adjust the Option Exercise Periods under Section H, H-2 Option Exercise Periods, to better align with production lead time.

4. Delete Federal Acquisition Regulation (FAR) Clause 52.232-29, Terms for Financing of Purchases of Commercial Items, as the Government has specified the financing terms and included FAR Clause 52.232- 30, Installment Payments for Commercial Items. The deletion of this clause was also captured in FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items.

5. Revise FAR Clause 52.228-16, Performance and Payment Bonds – Other Than Construction, to;

a. Delete the last sentence of the definition of “original contract price” to better align with paragraph

(b) of the clause.

b. Replace “on a per aircraft basis” with “to cover all aircraft”.

c. Delete the payment bond requirement.

6. Revise DFARS clause 252.211-7003, Item Unique Identification and Valuation, paragraph (c)(1)(ii), to clarify the requirement for marking components under the reference paragraph only applies to components when the requiring activity determines that item unique identification is required for mission essential or controlled inventory items in accordance with DFARS 211.274-2(a)(2). The DFARS clause 252.211-7003 has been updated to request offerors submit items for the Government’s consideration under 211.274- 2(a)(2).

7. Add DFARS clause 252.225-7013, Duty-free entry.

8. Incorporate clarifying updates to Section L, Table T-1.

9. Incorporate a revised Section L, Attachment L-1, for consistency with updates made to Table T-1 in

Amendment 0002.

10. Revise Section L, Attachment L-5, to remove reference to "siprnet-based" storage as there is no classified requirement for the contract.

SECTION B - SUPPLIES OR SERVICES AND PRICES

The following have been modified:

SUPPLIES OR SERVICES AND PRICE

B-1 EXTENDED CLIN DESCRIPTION

1. CLINs 0X01 TH-XX FULL RATE PRODUCTION LOTS I-V The Contractor shall deliver all TH-XX aircraft IAW Section B; Section J, Attachment 1 Performance Work Statement (PWS); and Section J, Attachment 2 Performance Based Specification (PBS). CLINs 0X01 shall also provide engineering support reachback, logistics reachback, liaison support, non-standard repairs and investigations support IAW Section C, Table C-3. Each TH-XX Full Rate Production aircraft delivered shall include a TH-XX flyaway kit IAW Section C, Table C-3 and Exhibit B.

2. CLINs 0X02 DATA The Contractor shall deliver Form, Fit and Function (FFF) data, Operation, Maintenance, Installation and Training (OMIT) data, and any applicable instructional and training materials applicable to CLINs 0X01, 0X03, 0X04, 0005

– 0008, and OPTION CLINs 0009 and 0011; to include access to FFF data, OMIT data, and subscriptions, etc. The data to be provided hereunder shall be furnished IAW Section C, Table C-3.

3. CLINs 0X03 LOTS I – V SPARE PARTS The Contractor shall deliver required spares based on PBS Appendix B (Profiles) and Appendix C (Usage Spectrum) and annual flight hours of 692 per aircraft for a period of 24-months after aircraft delivery. Additionally, the Contractor shall deliver the required number of engine spares to establish a pool based on Contractor proposed time between overhauls. The Offerors proposed spares list shall include the item description, manufacturer part number, manufacturer CAGE code, and quantity of spares for delivery in accordance with Exhibit C.

4. CLINs 0X04 PECULIAR SUPPORT EQUIPMENT The Contractor shall deliver peculiar support equipment (PSE); to include an energetics list, IAW Section C, Table C-3 and Exhibit D. TH-XX Full Rate Production Lot 1 shall contain the range of PSE to maintain and operate the number of aircraft required under CLIN 0001, and TH-XX Full Rate Production Lot 2 shall include the depth of PSE required to maintain and operate 130 aircraft.

5. CLIN 0005 HOISTS

The Contractor shall deliver hoists IAW Section C, Table C-3.

6. CLIN 0006 MISSION PLANNING SYSTEM

The Contractor shall deliver Mission Planning Systems; including any required hardware, software, and peripheral devices IAW Section C, Table C-3.

7. CLIN 0007 INSTRUCTOR PILOT TRAINING

The Contractor shall provide Instructor Pilot (IP) ground and flight training and currency flights; to include aircraft flight manuals, training publications, and any applicable course materials to each IP, for 25 Cadre Pilots, IAW Section C, Table C- 3.

8. CLIN 0008 MAINTAINANCE PERSONNEL TRAINING

The Contractor shall provide maintenance personnel training for 10 Government maintenance personnel, IAW Section C, Table C-3.

9. OPTION CLIN 0009 NAVAL AVIATION TRAINING AND OPERATING PROCEDURES

STANDARDIZATION DEVELOPMENT (NATOPS)

The Contractor shall deliver a baseline TH-XX Flight Manual and provide support IAW Section C, Table C-3.

Support shall include, but is not limited to: attendance and participation in meetings with the Government, providing a copy of materials related to the TH-XX, graphics and other source data applicable to NATOPS development.

10. OPTION CLIN 0010 DATA IN EXCESS OF FFF/OMIT

The Contractor shall provide data in excess of FFF/-OMIT data IAW clause H-4, Data Access.

11. OPTION CLIN 0011 SLING LOAD

The Contractor shall deliver 25 external sling load devices that include: sling load device, additional attaching hardware, and associated storage containers for the sling load device when removed from the helicopter.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

DESCRIPTIONS/WORK STATEMENT

C-1 PERFORMANCE WORK STATEMENT (PWS)

Section C provides alignment between the Schedule of CLINs in Section B and applicable PWS (Attachment 1) tasks. The contractor shall, in conformance with the Contract Provisions set forth in Sections B, D, E, F, G, H, and I, furnish the AHTS TH-XX in accordance with the PWS, Attachment 1, and all pertinent attachments, appendices, exhibits, and enclosures associated with Attachment J-1.

C-2 PERFORMANCE BASED SPECIFICATION (PBS)

Section C provides alignment between the Schedule of CLINs in Section B and applicable PBS (Attachment 2) tasks. The contractor shall, in conformance with the Contract Provisions set forth in Sections B, D, E, F, G, H, and I, furnish the AHTS TH-XX in accordance with the PBS, Attachment 2, and all pertinent attachments, appendices, exhibits, and enclosures associated with Attachment 2. The awardee's functional configuration baseline defined in Attachment J-4 will be incorporated into the contract.

C-3 PWS – ALIGNMENT WITH CONTRACT LINE ITEM NUMBERS (CLINs) The descriptions and specifications set forth below shall apply with equal force to the basic contract period CLINs and all corresponding option year CLINs:

Base Performance Period 00XX series Option 1 01XX series Option 2 02XX series Option 3 03XX series Option 4 04XX series

Performance task requirements are stated in PWS Section 3. All other PWS Sections provide reference, background, and compliance information necessary for the Contractor to perform PWS Section 3. The contractor shall comply with the performance requirements via CLINs specified in the PWS outline table below. If distinct PWS paragraphs apply to unique CLINs, the table below identifies such instances at the necessary level of indenture.

PWS PBS CLIN(s) SECTION J

ATTACHMENT/

EXHIBIT

1.0 Scope 1.0

1.1 Objective 1.1

1.2 Background 1.1

2.0 References Tables 2-1, 2-2, 2-3

3.0 Requirements 3.0

3.1 TH-XX 3.1

3.1.1 Contractor Responsibilities 0X01

3.1.2 FAA Airworthiness Certification 3.1.1 0X01 A001

3.1.3 FAA IFR Certification 3.1.1 0X01 A001

3.1.4 User Interface Configuration 3.1.12.10 0X01

3.1.5 Final Product Baseline 0X01 A002

3.1.6 Government Furnished Equipment/Materiel 0X01

3.1.7 Military Aircraft Identification Information 3.1.13 0X01 A027

3.1.8 TH-XX Flyaway Kit 0X01

3.1.8.1 Window Covers

3.1.8.2 Wheels for Skids

3.1.8.3 Blade Fold Kit

3.1.9 External Hoist and Sling Load Capabilities 3.1.9

3.1.9.1 External Hoist 3.1.9 0005

3.1.9.2 External Sling Load 3.1.9 0011

3.1.10 Software Subscriptions and Licenses 0X01 A003

3.1.11 Software End Items 0X01 A004

3.1.12 Aircraft Logs and Records 0X01 and 0X02 A005

3.1.13 Acceptance Test Procedures 0X02

3.1.13.1 Contractor Acceptance Test Procedures 0X02 A006

3.1.13.2 Government Acceptance Testing 0X02 A007

3.2 Peculiar Support Equipment 3.2.1 0X04

3.3 Mission Planning System 3.1.11 0006

3.4 Instructor Pilot Training 0007

3.4.1 TH-XX IP Training Requirements

3.4.2 TH-XX IP Training Curriculum 0007 A008

3.4.3 Flight Hours for Currency

3.5 NATOPS Flight Manual 0009 A013 and A028

3.6 Maintenance Personnel Training 0008

3.6.1 TH-XX Maintenance Training Requirements

3.6.2 TH-XX Maintenance Training Curriculum 0008 A009

3.7 Third Party Maintenance Training

3.8 Maintenance Technical Publications 0X02

3.8.1 Integrated Electronic Technical Manual A010

3.8.2 Ground Transportation Instructions 0X02 A011

3.9 Contractor-Government Data Submissions 0X02

3.9.1 Data Management

3.9.2 Data Deliverables

3.9.3 Data Access

a. Access Control

b. Interface

3.10 Instructions for Continued Airworthiness 0X02 A012

3.11 Non-FAA ICA Data 0010

3.11.1 TH-XX Engineering Design

3.11.2 New and Revised Product Baseline

Drawings

3.11.3 Source Data

3.12 Program Management Reviews

3.12.1 Post-Award Conference

3.12.2 Integrated Program Review

3.13 Program Progress/Status Reporting A013

3.14 Spectrum Management A014

3.15 Sustainment Engineering 0X01

3.15.1 Engineering/Logistics Reach Back

a. Engineering Investigations

b. Support Categories and Response Times A015

3.15.2 Field Service Representative

3.15.3 Non-Standard Repairs and Investigation

Process

3.15.4 Sustainment Management Plan A016

3.15.5 Industry Steering Committee

3.16 Initial Sparing Analysis Appendix C 0002 A017

3.17 Airframe Analysis Appendices B and C 0002 A018

3.18 Structural Monitoring Appendix C 0X01 and 0X02 A019

3.19 Prognostics and Health Management

Analysis

3.2.2 0X01 A020

3.20 Obsolescence / Diminishing Manufacturing

Sources and Material Shortages

0X02 A013

3.21 Environmental, Safety, and Occupational

Health

0X01 and 0X02 A021

3.22 Energetics List 0X02 A022

3.23 Configuration Management 0X01

3.23.1 Configuration Data A023

3.23.2 Configuration Management Plan A013 and A024

3.23.3 Configuration Status Accounting

3.23.4 Request for Variance (RFV)

3.23.5 Engineering Change Proposals A025

3.24 Cybersecurity 0X01 A026

3.25 Operational Security 0X01

3.25.1 Contractor Identification Badges

3.25.2 Government Base Access

3.26 Training Curriculum Development 0X01 and 0101 A013

C-4 ORDER OF PRECEDENCE

For the purposes of FAR clause 52.215-8, “Order of Precedence – Uniform Contract Format,” any portion of the contractor’s proposal that is incorporated into the contract by reference shall be considered a “Specification;” thus, the contractor’s proposal will have a lower precedence than the PWS, which is an “Attachment.”

SECTION H - SPECIAL CONTRACT REQUIREMENTS

SPECIAL CONTRACT REQUIREMENTS

Section H-1 OPTION EXERCISE PROVISIONS

The Government reserves the right to exercise the options herein in accordance with its requirements for supplies and services provided under the optional CLINs.

Section H-2 OPTION EXERCISE PERIODS

CLINS OPTION EXERCISE PERIOD

0009 XX Nov 2019 – XX Oct 2020 0010 XX Nov 2019 – XX Oct 2023 0011 XX Nov 2019 – XX Oct 2020 0101, 0102, 0103, 0104 and 0110 XX Nov 2020 – XX Dec 2020 0201, 0202, and 0203 XX Nov 2021 – XX Dec 2021 0301, 0302, and 0303 XX Nov 2022 – XX Dec 2022 0401, 0402, and 0403 XX Nov 2023 – XX Dec 2023

Section H-3 TRANSFER OF TYPE CERTIFICATE

In the event the Contractor intends to no longer maintain or to surrender the Type Certificate for Aircraft _____ to another entity, the Contractor shall (1) offer right of first refusal for all technical data relating to Aircraft __________ to the Government, and, if the Government does not purchase the technical data, (2) shall require the party receiving the Type Certificate to honor the terms of Attachment 3, Access Agreement, as part of any sale or agreement between the Contractor and the new Type Certificate Holder.

Section H-4 DATA ACCESS

This clause is voluntary and shall only be proposed if the Offeror proposes to CLIN 0010 and completes Attachment L-5, Access Agreement (note: this sentence is for proposal development purposes only and will be deleted upon contract award).

The Contractor shall provide the Government with access to technical data in accordance with Attachment 3, Access Agreement (note: this sentence will remain in the executed contract if the Offeror proposes the Data Access agreement).

SECTION I - CONTRACT CLAUSES

The following have been added by full text:

252.225-7013 DUTY-FREE ENTRY (MAY 2016)

(a) Definitions. As used in this clause- "Component" means any item supplied to the Government as part of an end product or of another component.

"Customs territory of the United States" means the 50 States, the District of Columbia, and Puerto Rico.

"Eligible product" means--

(i) Designated country end product as defined in the Trade Agreements (either basic or alternate) clause of this contract;

(ii) Free Trade Agreement country end product, other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, as defined in the Buy American-Free Trade Agreements-Balance of Payments Program (either basic or alternate II) clause of this contract; or

(iii) Canadian end product, as defined in the Buy American-Free Trade Agreements-Balance of Payments Program (either alternate I or alternate II) clause of this contract; or

(iv) Free Trade Agreement country end product other than a Bahrainian end product, Korean end product, Moroccan end product, Panamanian end product, or Peruvian end product, as defined in the Buy American-Free Trade Agreements-Balance of Payments Program (either alternate IV or alternate V) clause of this contract.

"Qualifying country and qualifying country end product" have the meanings given in the Trade Agreements clause, the Buy American and Balance of Payments Program clause, or the Buy American--Free Trade Agreements- -Balance of Payments Program clause of this contract, basic or alternate.

(b) Except as provided in paragraph (i) of this clause, or unless supplies were imported into the customs territory of the United States before the date of this contract or the applicable subcontract, the price of this contract shall not include any amount for duty on—

(1) End items that are eligible products or qualifying country end products;

(2) Components (including, without limitation, raw materials and intermediate assemblies) produced or made in qualifying countries, that are to be incorporated in U.S.- made end products to be delivered under this contract; or

(3) Other supplies for which the Contractor estimates that duty will exceed $300 per shipment into the customs territory of the United States.

(c) The Contractor shall--

(1) Claim duty-free entry only for supplies that the Contractor intends to deliver to the Government under this contract, either as end items or components of end items; and

(2) Pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use, other than-

(i) Scrap or salvage; or

(ii) Competitive sale made, directed, or authorized by the Contracting Officer.

(d) Except as the Contractor may otherwise agree, the Government will execute duty-free entry certificates and will afford such assistance as appropriate to obtain the duty-free entry of supplies-

(1) For which no duty is included in the contract price in accordance with paragraph (b) of this clause; and

(2) For which shipping documents bear the notation specified in paragraph (e) of this clause.

(e) For foreign supplies for which the Government will issue duty-free entry certificates in accordance with this clause, shipping documents submitted to Customs shall-

(1) Consign the shipments to the appropriate-

(i) Military department in care of the Contractor, including the Contractor's delivery address; or

(ii) Military installation; and

(2) Include the following information:

(i) Prime contract number and, if applicable, delivery order number.

(ii) Number of the subcontract for foreign supplies, if applicable.

(iii) Identification of the carrier.

(iv)(A) For direct shipments to a U.S. military installation, the notation: "UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE" Duty-Free Entry to be claimed pursuant to Section XXII, Chapter 98, Subchapter VIII, Item 9808.00.30 of the Harmonized Tariff Schedule of the United States. Upon arrival of shipment at the appropriate port of entry, District Director of Customs, please release shipment under 19 CFR Part 142 and notify Commander, Defense Contract Management Agency (DCMA) New York, ATTN: Customs Team, DCMAE-GNTF, 207 New York Avenue, Staten Island, New York, 10305-5013, for execution of Customs Form 7501, 7501A, or 7506 and any required duty-free entry certificates

(B) If the shipment will be consigned to other than a military installation, e.g., a domestic contractor's plant, the shipping document notation shall be altered to include the name and address of the contractor, agent, or broker who will notify Commander, DCMA New York, for execution of the duty-free entry certificate. (If the shipment will be consigned to a contractor's plant and no duty-free entry certificate is required due to a trade agreement, the Contractor shall claim duty-free entry under the applicable trade agreement and shall comply with the U.S. Customs Service requirements. No notification to Commander, DCMA New York, is required

(v) Gross weight in pounds (if freight is based on space tonnage, state cubic feet in addition to gross shipping weight).

(vi) Estimated value in U.S. dollars.

(vii) Activity address number of the contract administration office administering the prime contract, e.g., for DCMA Dayton, S3605A.

(f) Preparation of customs forms.

(1)(i) Except for shipments consigned to a military installation, the Contractor shall-

(A) Prepare any customs forms required for the entry of foreign supplies into the customs territory of the United States in connection with this contract; and

(B) Submit the completed customs forms to the District Director of Customs, with a copy to DCMA NY for execution of any required duty-free entry certificates.

(ii) Shipments consigned directly to a military installation will be released in accordance with sections 10.101 and 10.102 of the U.S. Customs regulations.

(2) For shipments containing both supplies that are to be accorded duty-free entry and supplies that are not, the Contractor shall identify on the customs forms those items that are eligible for duty-free entry.

(g) The Contractor shall-

(1) Prepare (if the Contractor is a foreign supplier), or shall instruct the foreign supplier to prepare, a sufficient number of copies of the bill of lading (or other shipping document) so that at least two of the copies accompanying the shipment will be available for use by the District Director of Customs at the port of entry;

(2) Consign the shipment as specified in paragraph (e) of this clause; and

(3) Mark on the exterior of all packages--

(i) "UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE"; and

(ii) The activity address number of the contract administration office administering the prime contract.

(h) The Contractor shall notify the Administrative Contracting Officer (ACO) in writing of any purchase of eligible products or qualifying country supplies to be accorded duty-free entry, that are to be imported into the customs territory of the United States for delivery to the Government or for incorporation in end items to be delivered to the Government. The Contractor shall furnish the notice to the ACO immediately upon award to the supplier and shall include in the notice--

(1) The Contractor's name, address, and Commercial and Government Entity (CAGE) code;

(2) Prime contract number and, if applicable, delivery order number;

(3) Total dollar value of the prime contract or delivery order;

(4) Date of the last scheduled delivery under the prime contract or delivery order;

(5) Foreign supplier's name and address;

(6) Number of the subcontract for foreign supplies;

(7) Total dollar value of the subcontract for foreign supplies;

(8) Date of the last scheduled delivery under the subcontract for foreign supplies;

(9) List of items purchased;

(10) An agreement that the Contractor will pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use other than-

(i) Scrap or salvage; or

(ii) Competitive sale made, directed, or authorized by the Contracting Officer;

(11) Country of origin; and

(12) Scheduled delivery date(s).

(i) This clause does not apply to purchases of eligible products or qualifying country supplies in connection with this contract if-

(1) The supplies are identical in nature to supplies purchased by the Contractor or any subcontractor in connection with its commercial business; and

(2) It is not economical or feasible to account for such supplies so as to ensure that the amount of the supplies for which duty-free entry is claimed does not exceed the amount purchased in connection with this contract.

(j) The Contractor shall-

(1) Insert the substance of this clause, including this paragraph (j), in all subcontracts for-

(i) Qualifying country components; or

(ii) Nonqualifying country components for which the Contractor estimates that duty will exceed $200 per unit;

(2) Require subcontractors to include the number of this contract on all shipping documents submitted to Customs for supplies for which duty-free entry is claimed pursuant to this clause; and

(3) Include in applicable subcontracts-

(i) The name and address of the ACO for this contract;

(ii) The name, address, and activity address number of the contract administration office specified in this contract; and

(iii) The information required by paragraphs (h)(1), (2), and (3) of this clause.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (AUG 2018)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

X (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L.

111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

X (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

X (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (Feb 1999) of 52.222-26.

X (29)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (July 2014) of 52.222-35.

X (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (July 2014) of 52.222-36.

X (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

____ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

(53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

X (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

Only applicable to CLINs 0X01.

X (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

X (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

_____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xviii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xix) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.228-16 PERFORMANCE AND PAYMENT BONDS -- OTHER THAN CONSTRUCTION (NOV

2006)

(a) Definitions. As used in this clause -- “Original contract price” means the award price of the contract or, for requirements contracts, the price payable for the estimated quantity; or for indefinite-quantity contracts, the price payable for the specified minimum quantity.

(b) The Contractor shall furnish a performance bond (Standard Form 1418) for the protection of the Government in an amount equal to 70% of contract price for CLINs 0001, 0101, 0201, 0301, and 0401 to cover all aircraft.

(c) The Contractor shall furnish all executed bonds, including any necessary reinsurance agreements, to the Contracting Officer, within 10 days, but in any event, before starting work.

(d) The Government may require additional performance and payment bond protection if the contract price is increased. The Government may secure additional protection by directing the Contractor to increase the penal amount of the existing bonds or to obtain additional bonds.

(e) The bonds shall be in the form of firm commitment, supported by corporate sureties whose names appear on the list contained in Treasury Department Circular 570, individual sureties, or by other acceptable security such as postal money order, certified check, cashier's check, irrevocable letter of credit, or, in accordance with Treasury Department regulations, certain bonds or notes of the United States. Treasury Circular 570 is published in the Federal Register, or may be obtained from the:

U.S. Department of the Treasury Financial Management Service Surety Bond Branch 3700 East West Highway, Room 6F01 Hyattsville, MD 20782

Or via the internet at http://www.fms.treas.gov/c570/.

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause--http://www.fms.treas.gov/c570/

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200(ECC200) specification found within International Standards Organization (ISO)/ International Electrotechnical Commission

(IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier;

the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government's unit acquisition cost” means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous.

The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been…