3._180202_Vol_III_of_XI_Part_6_Att_A_thru_E_with_photo_edits-1395851.pdf.pdf

ePROJECTS WORK ORDER NO.

1395851

CONSTRUCTION CONTRACT

No.:

APPROPRIATION: MCON

Final RFP Submittal

Ship Repair Training Facility

Volume III of XI

RFP: Part 6, Attachments A thru E at the

Norfolk Naval Shipyard, Portsmouth, Virginia

(P-257)

SUBMITTED BY:

Clark Nexsen, Inc.

4525 Main Street, Suite 1400

Virginia Beach, VA 23462

(A/E Contract No. N40085-15-D-0068-0016)

PREPARED BY:

Lead Architect: Charles B. Beshore, RA

Landscape Architecture: J. Thomas Dalton, PLA

Interior Design: Susan B. Drew, CID

Structural: David S. Clark, PE

Mechanical: Steven M. Beccia, PE

Electrical: Scott P. Schwerin, PE

Fire Protection: Kari E. Fields, PE

Civil: Terry A. Riley, PE

Geotechnical: Charles F.P. Crawley, III, PE, GeoEnvironmental Resources, Inc.

Commissioning: Thomas S. Ostasiewski, PE, Facility Dynamics Engineering

Audio/Visual: Andy Bennett, Audiovisual Systems Consulting Services

APPROVED BY:

For Commander, NAVFAC [Insert Command]:

Date: [Month Day, Year]

Project Manager: LouAnn Fornataro, RA

A/E Firm Name: Clark Nexsen, Inc.

Date: 6 February 2018

P-257 Ship Repair Training Facility eProjects Work Order No. 1395851 Norfolk Naval Shipyard, Portsmouth, Virginia

PART SIX - ATTACHMENTS - Page 1

PART SIX - ATTACHMENTS

• Attachment A – Movable Furnishings Summary

• Attachment B – Equipment Mock Ups/Training Aids

• Attachment C – AV System Requirements

• Attachment D – Erosion & Sediment Control Guidance for CI Community

• Attachment E – Stormwater Management Plan Guidance for CI Community

• Attachment F – Utility GIS Mapping

• Attachment G – Temporary Perimeter Security Fence (NOT USED)

• Attachment H – NAVFAC Capital Improvements Gov Energy Baseline & Offers Model Performance Rating Assumptions (PRA)

• Attachment I – Hydrant Flow Test Report

• Attachment J – Applicable Specification Sections

• Attachment K – NNSY Utility Connection Permit Application

• Attachment L – Construction Schedule

• Attachment M – Crane Test Forklift, Crane Test Weight and Hi-Bay Forklift Information

• Attachment N – Base Wide Mass Notification System Interface Language

• Attachment O – Permits Record of Decision (PROD)

• Attachment P – City Engineer Documents, Portsmouth, VA

• Attachment Q – Water Meter Standard Detail W-015

• Attachment R – Geotech Report

• Attachment S – Cone Penetration Test Raw Data

• Attachment T – Additional Geotech Report

• Attachment U – Geophysical Report

• Attachment V – Historic Geotechnical Data in Vicinity of Site

• Attachment W – Modular Building Drawings

• Attachment X – NNSY’s Subsurface Utility Drawing (P-257 Site)

• Attachment Y – Potential Connection Points to City of Portsmouth Storm System

• Attachment Z – SidePlate System – Preliminary Drawings for Progressive Collapse Avoidance

• Attachment AA –Compressed Air Site Plan

• Attachment AB – NEXCOM Micro-Mart Equipment and Layout

• Attachment AC – Drawings: General, Civil, Landscape

• Attachment AD – Drawings: Architecture, Interiors

• Attachment AE – Drawings: Mechanical, Electrical

Attachment A

FF&E MOVABLE FURNISHING

SUMMARY

Procurement and installation of FF&E will be funded separately as a modification to the construction contract. Design and documentation of the FF&E package, and infrastructure to support FF&E, are part of the construction contract (Base Price). Design-builder's Interior Designer must validate FF&E Movable Furnishings requirements listed/described in this RFP and revise, if required, as the project is developed.

FF&E Movable Furnishing Summary - Section E2020, Floor 1

Room No. Qty. Item #

102 Lobby 7 113 end table, 24" dia, laminate/steel

2 306 lounge sectional seating with table

10 315 lobby lounge chair

1 708 artwork - wall mounted logo graphic

104 Building Mgr/Sched. Office 1 104 U-shape desk, steel with laminate top

1 105 L-shape desk, steel with laminate top

2 205 bookshelf 36" x 72"h

1 201 36" w x 18" d x 42" h storage cabinet, lock

2 303 task chair with arms; uph seat, mesh back

1 304 guest chair with arms

106A 32pn Classroom 48 101 training table 72" x 24" mobile

106B 3 102 instructor table 72" x 24" sit/stand

106C 3 103 instructor podium

3 201 36" w x 18" d x 42" h storage cabinet, lock

96 301 student chair with arms; uph seat, mesh back

3 302 instructor chair/stool

3 704 trash container - classroom

3 705 recycle container- classroom

107-111 24pn Classroom 60 101 training table 72" x 24" mobile

5 102 instructor table 72" x 24" sit/stand

5 103 instructor podium

5 201 36" w x 18" d x 42" h storage cabinet, lock

120 301 student chair with arms; uph seat, mesh back

5 302 instructor chair/stool

5 704 trash container - classroom

5 705 recycle container- classroom

112-120 16pn Classroom 72 101 training table 72" x 24" mobile

9 102 instructor table 72" x 24" sit/stand

9 103 instructor podium

9 201 36" w x 18" d x 42" h storage cabinet, lock

144 301 student chair with arms; uph seat, mesh back

9 302 instructor chair/stool

9 704 trash container - classroom

9 705 recycle container- classroom

122 Student Break 3 106 square break table 36" x 36" laminate top

12 305 break room chair

1 701 trash container - break room

1 702 recycle container- break room

2 401 refrigerator

1 402 coffee maker

2 403 microwave

1 404 freestanding icemaker/dispenser

123 Training Aid Storage 12 203 36" w x 24" d x 72" h storage cabinet, lock

4 206 mobile storage cart

127 Training Aid Storage 13 203 36" w x 24" d x 72" h storage cabinet, lock

9 207 36" w x 18" d x 72" h open shelving unit

130 Training Aid Storage 25 203 36" w x 24" d x 72" h storage cabinet, lock

18 207 36" w x 18" d x 72" h open shelving unit

11 206 mobile storage cart

140 RADCON SQRS Mock Up 8 204 48" w x 24" d x 72" h indust storage cabinet, lock

1 601 HD 8' x 3' stainless stl work bench with pipe vise

1 104 U-shape desk, steel with laminate top

1 303 task chair with arms; uph seat, mesh back

5 301 student chair with arms; uph seat, mesh back

1 107 conference table 72" x 36" laminate top

141 Student Break 4 106 square break table 36" x 36" laminate top

14 305 break room chair

1 701 trash container - break room

1 702 recycle container- break room

1 401 refrigerator

1 402 coffee maker

2 403 microwave

1 404 freestanding icemaker/dispenser

142 Insulation Training 6 204 48" w x 24" d x 72" h indust storage cabinet, lock

2 601 HD 8' x 3' stainless stl work bench with pipe vise

1 608 Mobile material storage rack (6 rolls) 60"w

143 RADCON Elec & Lockwire 1 108 conference table 96" x 42" laminate top

1 204 48" w x 24" d x 72" h indust storage cabinet, lock

8 301 student chair with arms; uph seat, mesh back

1 601 HD 8' x 3' stainless stl work bench with pipe vise

144 RADCON Brief/TLD Issue 14 208 48"w x 24" d x 72" h open shelving unit

2 104 U-shape desk, steel with laminate top

2 210 5 drawer x 36" wide lateral file, lock

2 303 task chair with arms; uph seat, mesh back

4 304 guest chair with arms

145 RADCON Nclr Pipefitter 1 108 conference table 96" x 42" laminate top

1 105 L-shape desk, steel with laminate top

2 203 36" w x 24" d x 72" h storage cabinet, lock

2 209 36"w x 24" d x 72" h open shelving unit

8 301 student chair with arms; uph seat, mesh back

1 303 task chair with arms; uph seat, mesh back

2 602 tool chest, mobile with lock

147 RADCON Nclr Test Mech 1 108 conference table 96" x 42" laminate top

1 204 48" w x 24" d x 72" h indust storage cabinet, lock

8 301 student chair with arms; uph seat, mesh back

3 602 tool chest, mobile with lock

149A RAD Training Mock-Up 3 111 30" x 60" desk, shipboard type

3 308 chair, 4 leg no arms, shipboard type

149B RAD Staging Area 2 307 steel bench

14 211 Storage Cabinet 36" x 24"x 78" h, mobile, hd, lock

2 601 HD 8' x 3' stainless stl work bench with pipe vise

2 603 RAD Custom Storage Racks 72"w x 24"d

2 604 large mobile laundry cart

149C RAD Dosimetry 1 111 30" x 60" desk, shipboard type

1 308 chair, 4 leg no arms, shipboard type

149E RAD Small Staging Areas 16 211 Storage Cabinet 36" x 24"x 78" h, mobile, hd, lock

149G RAD Briefing/Instrum Src 8 109 round table, 42" diam. shipboard type

32 308 chair, 4 leg no arms, shipboard type

8 703 white board, 48" w x 36" high

2 110 small table, shipboard type

150 Washer/Dryer 1 405 commercial washer

1 406 commercial dryer

151A Motor, Gen & Equip Repair 1 108 conference table 96" x 42" laminate top

8 301 student chair with arms; uph seat, mesh back

1 112 equipment credenza, laminate top

1 204 48" w x 24" d x 72" h indust storage cabinet, lock

4 309 industrial work stool/chair

2 605 HD soldering bench & riser, stainless, power

151B Crane & Rigging Area 2 204 48" w x 24" d x 72" h indust storage cabinet, lock

152 TE Practical Test Room 6 118 Testing carrel 48" w x 24" d

5 204 48" w x 24" d x 72" h indust storage cabinet, lock

6 301 student chair with arms; uph seat, mesh back

5 219 48"w x 24" d x 72" h indust shelv -1000 lbs/shelf

4 601 HD 8' x 3' stainless stl work bench with pipe vise

153A Radiography Support Fac 9 219 48"w x 24" d x 72" h indust shelv -1000 lbs/shelf

153B Radiography Support Fac 2 105 L-shape desk, steel with laminate top

2 303 task chair with arms; uph seat, mesh back

154B Metal. Prep Lab Stor. 3 204 48" w x 24" d x 72" h indust storage cabinet, lock

154C Metal. Lab 2 105 L-shape desk, steel with laminate top

1 111 task chair with arms; uph seat, mesh back

5 207 36" w x 18" d x 72" h open shelving unit

2 303 task chair with arms; uph seat, mesh back

155A Welding Facility 6 219 48"w x 24" d x 72" h indust shelv -1000 lbs/shelf

2 601 HD 8' x 3' stainless stl work bench with pipe vise

155C Welding Office 3 803 6'x8' workstation with storage below

3 303 task chair with arms; uph seat, mesh back

156 Shipping/Receiving 1 105 L-shape desk, steel with laminate top

1 303 task chair with arms; uph seat, mesh back

Movable Artwork 20 708 artwork

FF&E Movable Furnishing Summary - Section E2020, Floor 2

Floor 2

203 Nursing Mothers 1 113 end table, 24" dia, laminate/steel

1 310 lounge chair

1 401 refrigerator

204 900T Filing 1 212 high density file system*

*refer to specific requirements in Part 3 E202007

7 213 48"w x18" d x 72" h open shelving unit

2 214 30"w x18" d x 72" h open shelving unit

1 207 36" w x 18" d x 72" h open shelving unit

1 105 L-shape desk, steel with laminate top

1 303 task chair with arms; uph seat, mesh back

1 216 bookshelf 36" x 72"h

209 Training Aid Storage 5 213 48"w x18" d x 72" h open shelving unit

8 203 36" w x 24" d x 72" h storage cabinet, lock

210 Conference 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

17 311 conference room chair with arms

16 312 conference room side chair with arms

211 Conference 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

16 311 conference room chair with arms

212 Training Aid Storage 4 203 36" w x 24" d x 72" h storage cabinet, lock

6 206 mobile storage cart

213 Student Kitchenette 1 701 trash container - break room

1 702 recycle container- break room

2 401 refrigerator

2 402 coffee maker

4 403 microwave

1 404 freestanding icemaker/dispenser

214 Student Study 2 107 conference table 72" x 36" laminate top

12 301 student chair with arms; uph seat, mesh back

1 701 trash container - break room

1 702 recycle container- break room

215 Student Break 9 106 square break table 36" x 36" laminate top

36 305 break room chair

216 Student Study 2 107 conference table 72" x 36" laminate top

12 301 student chair with arms; uph seat, mesh back

1 701 trash container - break room

1 702 recycle container- break room

218-220 32pn Classroom 48 101 training table 72" x 24" mobile

3 102 instructor table 72" x 24" sit/stand

3 103 instructor podium

3 201 36" w x 18" d x 42" h storage cabinet, lock

96 301 student chair with arms; uph seat, mesh back

3 302 instructor chair/stool

3 704 trash container - classroom

3 705 recycle container- classroom

221-225 24pn Classroom 60 101 training table 72" x 24" mobile

5 102 instructor table 72" x 24" sit/stand

5 103 instructor podium

5 201 36" w x 18" d x 42" h storage cabinet, lock

120 301 student chair with arms; uph seat, mesh back

5 302 instructor chair/stool

5 704 trash container - classroom

5 705 recycle container- classroom

226-234 16pn Classroom 72 101 training table 72" x 24" mobile

9 102 instructor table 72" x 24" sit/stand

9 103 instructor podium

9 201 36" w x 18" d x 42" h storage cabinet, lock

144 301 student chair with arms; uph seat, mesh back

9 302 instructor chair/stool

9 704 trash container - classroom

9 705 recycle container- classroom

235 Corridor 1 113 end table, 24" dia, laminate/steel

2 314 lounge chair with tablet arm

236 Conference 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

16 311 conference room chair with arms

237 Conference 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

16 311 conference room chair with arms

238 Conference 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

16 311 conference room chair with arms

239 Secure Storage 7 207 36" w x 18" d x 72" h open shelving unit

3 203 36" w x 24" d x 72" h storage cabinet, lock

9 215 safe - 5 drawer

243 Training Aid Storage 14 203 36" w x 24" d x 72" h storage cabinet, lock

6 214 30"w x18" d x 72" h open shelving unit

16 207 36" w x 18" d x 72" h open shelving unit

10 206 mobile storage cart

244 Student Break 9 106 square break table 36" x 36" laminate top

36 305 break room chair

2 401 refrigerator

1 402 coffee maker

2 403 microwave

1 404 freestanding icemaker/dispenser

1 701 trash container - break room

1 702 recycle container- break room

248 Student Break 2 106 square break table 36" x 36" laminate top

8 305 break room chair

1 401 refrigerator

1 402 coffee maker

2 403 microwave

1 404 freestanding icemaker/dispenser

1 701 trash container - break room

1 702 recycle container- break room

249A RADCON Staging Area 8 101 training table 72" x 24" mobile

1 102 instructor table 72" x 24" sit/stand

10 204 48" w x 24" d x 72" h indust storage cabinet, lock

10 213 48"w x18" d x 72" h open shelving unit

16 301 student chair with arms; uph seat, mesh back

1 302 instructor chair/stool

249B RADCON Training Booths 16 203 36" w x 24" d x 72" h storage cabinet, lock

250 RADCON Prim Valve Rep 1 105 L-shape desk, steel with laminate top

1 108 conference table 96" x 42" laminate top

4 203 36" w x 24" d x 72" h storage cabinet, lock

8 301 student chair with arms; uph seat, mesh back

1 303 task chair with arms; uph seat, mesh back

2 606 HD 96" x 30" stainless stl work bench table/riser

251 RADCON Nclr Temp Vent 1 108 conference table 96" x 42" laminate top

2 203 36" w x 24" d x 72" h storage cabinet, lock

8 301 student chair with arms; uph seat, mesh back

252 RADCON Flange Mech 1 105 L-shape desk, steel with laminate top

3 203 36" w x 24" d x 72" h storage cabinet, lock

1 303 task chair with arms; uph seat, mesh back

12 309 industrial work stool/chair

254 RADCON Freeze/Seal 1 203 36" w x 24" d x 72" h storage cabinet, lock

3 602 tool chest, mobile with lock

2 606 HD 96" x 30" stainless stl work bench table/riser

2 607 HD 60" x 30" stainless stl work bench table/riser

255 Training Aid Storage 16 203 36" w x 24" d x 72" h storage cabinet, lock

6 206 mobile storage cart

258 NDT Facility 3 204 48" w x 24" d x 72" h indust storage cabinet, lock

259A NDT Practical Room 8 204 48" w x 24" d x 72" h indust storage cabinet, lock

260 NDT Lab A 8 204 48" w x 24" d x 72" h indust storage cabinet, lock

8 309 industrial work stool/chair

3 601 HD 8' x 3' stainless stl work bench with pipe vise

261 NDT Lab B 8 204 48" w x 24" d x 72" h indust storage cabinet, lock

8 309 industrial work stool/chair

3 601 HD 8' x 3' stainless stl work bench with pipe vise

Movable Artwork 20 708 artwork

FF&E Movable Furnishing Summary - Section E2020, Floor 3

Floor 3

303 Open Office 8 117 D Top table for open office area

3 201 36" w x 18" d x 42" h storage cabinet, lock

20 210 5 drawer x 36" wide lateral file, lock

5 217 3 drawer x 30" wide lateral file, lock

67 218 3 drawer x 36" wide lateral file, lock

197 303 task chair with arms; uph seat, mesh back

16 304 guest chair with arms

197 801 6'x8' workstation with OH storage

307 VTC Conference Room 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

17 311 conference room chair with arms

16 312 conference room side chair with arms

308- Office 20 303 task chair with arms; uph seat, mesh back

327 60 313 private office guest chair

20 802 modular private office workstation

328 Staff Break 6 106 square break table 36" x 36" laminate top

1 113 end table, 24" dia, laminate/steel

24 305 break room chair

2 314 lounge chair with tablet arm

4 401 refrigerator

2 402 coffee maker

4 403 microwave

1 404 freestanding icemaker/dispenser

2 701 trash container - break room

2 702 recycle container- break room

329 Code 1200 Media/Stack 2 116 60x30 desk with overhead storage

1 107 conference table 72" x 36" laminate top

2 202 36" w x 18" d x 72" h storage cabinet, lock

9 216 bookshelf 36" x 72"h

2 303 task chair with arms; uph seat, mesh back

4 304 guest chair with arms

333 Print/Copy 2 706 trash container - print/copy

2 707 recycle container- print/copy

Movable Artwork 10 708 artwork

FF&E Movable Furnishing Summary - Section E2020, Floor 4

Floor 4

403 Open Office 6 117 D Top table for open office area

15 210 5 drawer x 36" wide lateral file, lock

3 217 3 drawer x 30" wide lateral file, lock

20 218 3 drawer x 36" wide lateral file, lock

98 303 task chair with arms; uph seat, mesh back

12 304 guest chair with arms

98 801 6'x8' workstation with OH storage

404 Staff Break 3 106 square break table 36" x 36" laminate top

12 305 break room chair

2 401 refrigerator

1 402 coffee maker

2 403 microwave

1 404 freestanding icemaker/dispenser

1 701 trash container - break room

1 702 recycle container- break room

405 VTC Conference Room 1 114 conference table 60" x 15', boat shape

1 115 credenza 96" x 20"

17 311 conference room chair with arms

16 312 conference room side chair with arms

409- Office 16 303 task chair with arms; uph seat, mesh back

424 48 313 private office guest chair

16 802 modular private office workstation

428 Exam Work Room 4 116 60x30 desk with overhead storage

1 107 conference table 72" x 36" laminate top

13 207 36" w x 18" d x 72" h open shelving unit

4 303 task chair with arms; uph seat, mesh back

6 304 guest chair with arms

1 706 trash container - print/copy

1 707 recycle container- print/copy

429 Print/Copy 1 706 trash container - print/copy

1 707 recycle container- print/copy

Movable Artwork 10 708 artwork

Attachment B

EQUIPMENT MOCK UPS/TRAINING AIDS

PHOTOGRAPHS OF EXISTING EQUIPMENT HAVE BEEN

REDACTED, AS NECESSARY, IN ACCORDANCE WITH

NORFOLK NAVAL SHIPYARD (NNSY) SECURITY GUIDANCE.

GFGI/

GFCI/

CFCI

Funding

Source

New or

Move

Existing

Tag on

Furniture

Plans

Qty Name New/Code New Location Description

PHYSICAL

DIMENSIONS

(LxWxH)

WEIGHT

(lbs)

POWER

WATER/

Drain.

rqrmts

HVAC/ VENTI-

LATION

PROCESS/

UTILITIES/

WASTE

NOTES/ OTHER

SPECIAL

REQUIREMENTS

1 CFCI MILCON NEW 130 E1A 1 Fume Hood NEW 154A Met Prep Lab

Labconco #120600002, 6' Protector Stainless

Steel Radioisotope Laboratory Hood, 2 Fixtures, 1

Receptacle, 115V

72"w x 31.7"d x

59"h 580 lbs. 115v, 50/60 Hz Notes 1, 2

2 CFCI MILCON NEW 130 E1B 2 Lab Bench NEW 154A Met Prep Lab

Labconco #9900100 36" wide Cabinet and

#9500600 6' SpillStopper Work Surface, 30.0" deep 36"w x 22"d x 36"h 82 lbs N/A

3 GFGI

NAVSEA/

NNSY NEW 130 E2 2 Grinder/Polisher NEW 154AMet Prep Lab MetaServ 250 Grinder Polisher 32" x 29"x 10" 82 lbs.

85-VAC,

50/60HZ Tabletop

4 GFGI

NAVSEA/

NNSY NEW 130 E3 2

High Res Microscope/USB output NEW 154C Met Lab Olympus GX51 Microscope 120V, 20A USB Output

5 CFCI

NAVSEA/

NNSY NEW 130 E4 1 CABINET X-Ray SYSTEM NEW

153A Radiography Supp

Facility Marietta NDT #FC-320; NSI

53.75"X52.5"X111.5

" See Part 6 480V, 60A

6 CFCI MILCON NEW 130 E5A 2 Fume Hood NEW 152 TE Practical Test Room

Labconco #120600002, 6' Protector Stainless

Steel Radioisotope Laboratory Hood, 2 Fixtures, 1

Receptacle, 115V

72"w x 31.7"d x

59"h 580 lbs. 115v, 50/60 Hz Notes 1, 2

7 CFCI MILCON NEW 130 E5B 4 Lab Bench (for Hood above) NEW 152 TE Practical Test Room

Labconco #9900100 36" wide Cabinet and

#9500600 6' SpillStopper Work Surface, 30.0" deep 36"w x 22"d x 36"h 82 lbs

8 CFCI MILCON NEW 130 E6A 16 Fume Hood NEW 260/261 NDT Labs A&B

Labconco #120600002, 6' Protector Stainless

Steel Radioisotope Laboratory Hood, 2 Fixtures, 1

Receptacle, 115V

72"w x 31.7"d x

59"h 580 lbs. 115v, 50/60 Hz Notes 1, 2

9 CFCI MILCON NEW 130 E6B 32 Lab Bench (for Hood above) NEW 260/261 NDT Labs A&B

Labconco #9900100 36" wide Cabinet and

#9500600 6' SpillStopper Work Surface, 30.0" deep 36"w x 22"d x 36"h 82 lbs

10 GFGI

NAVSEA/

NNSY NEW 130 E7 1 Parts Washer NEW 258 NDT Facility Safety Kleen Systems, Inc. - Model 250/260 27"X32"X61.5 500 lbs.

115VAC, 13A,

60HZ

water -reservoir 20 gallons

Ambient operating temperature solvent cleaning process www.safety-kleen.com

11 CFCI

NAVSEA/

NNSY NEW 130 E8 1

MT Inspection Hood (for Wet

MT System) NEW 258 NDT Facility Magnaflux GE Series, Model# GE-96 136"X41"X122" 480v/ 3ph

VENTILATION

REQUIRED, AIR

HOSE (100 PSI

MIN.)

www.magnaflux.com, REQUIRES BLACK

LIGHTING TO FULFILL

TECHPUB 271

12 CFCI

NAVSEA/

NNSY NEW 130 E9 1

Fluorescent Penetrant Testing

Equipment System NEW 258 NDT Facility Magnaflux ZA-1633

132 x 34 x 36 in 230V/460V, 60Hz, 1ph

13 130 E10-E14 NOT USED

14 CFCI

NAVSEA/

NNSY NEW 130 E15 1 Wet MT System NEW 258 NDT Facility Magnaflux A-2030 89"X41"X61" 220v

15 GFGI

NAVSEA/

NNSY NEW 130 E16 1 Abrasive Cutter (freestanding) NEW

154A Metallography Prep

Lab Delta Manual Abrasive Cutter #10-2213EB-460 33" x 48" x 64" 208V, 1ph, 20A

16 GFGI

NAVSEA/

NNSY NEW 130 E17 1 Abrasive Cutter (tabletop) NEW

154A Metallography Prep

Lab Delta AbrasiMet 250 - #10-10106 28" x 29" x 22" 208V, 1ph, 20A add. RecircTank

17 CFCI MILCON NEW 130 E18 1 Film Processor NEW 153C/D Film Room 2/3 GE Stucturix U

47.25"l x 26.75"w x

41.4"h 552 lbs

240 VAC,

60Hz,16A

20 L final wash water tank. N/A

18 GFCI

NAVSEA/

NNSY NEW 130 E19 2 Film Viewer NEW 153B Film Room 1 NDT 65-C1 Film Viewer 25.3" x 16.25"x15" 39 lbs.

115 VAC, 50 -

60Hz

19 GFGI

NAVSEA/

NNSY NEW 724 E1 4 Soldering Stations NEW

151A Motor,Gen & Equip

Rep flexible exhaust ventilation for 4 stations (4 on each side) with at least 8 (eight) 120v 15a receptacles req. minimum of

(8) 120v 15a receptacles Note 3

20 GFCI

NAVSEA/

NNSY NEW 900T E1 1 Pipefitting/bending table 151E Pipefitting Verify requirements with end User Code 900T approx. 5'X 20'

X 6'

120V & 220V

(existing table) tool air

P-257 Ship Repair Facility - Equipment, Mock-ups/Training Aids November, 2017

(2)Two Chemical tanks for develop-ment, 24 L, 20L respectively.

CFCI

Funding

Source

New or

Move

Existing

Tag on

Furniture

Plans

Qty Name New/Code New Location Description

PHYSICAL

DIMENSIONS

(LxWxH)

WEIGHT

(lbs)

POWER

WATER/

Drain.

rqrmts

HVAC/ VENTI-

LATION

PROCESS/

UTILITIES/

WASTE

NOTES/ OTHER

SPECIAL

REQUIREMENTS

21 CFCI MILCON NEW 926 E1 25 Custom Fabricated Weld Booth NEW 155A Welding Facility Note 3, 10

22 926 E2 NOT USED

23 GFGI

NAVSEA/

NNSY NEW 926 E3 3 Plasma Cutters NEW

155A Weld Facility (adjacent

Downdraft Table) Hypertherm Powermax 45 XP 440V, 3 ph, 30A tool air

24 CFCI MILCON NEW 926 E4A 1 PT Hood NEW 155B PT

Labconco #120400002, 4' Protector Stainless

Steel Radioisotope Laboratory Hood, 2 Fixtures, 1

Receptacle, 115V

48"w x 31.7"d x

59"h 525 lbs. 115v, 50/60 Hz Note 1, 5

25 CFCI MILCON NEW 926 E4B 1 PT Cabinet (for Hood above) NEW 155B PT

Labconco #9900000 48" wide Cabinet and

#9500400 4' SpillStopper Work Surface, 30.0" deep 48"w x 22"d x 36"h 118 lbs.

26 GFCI

NAVSEA/

NNSY NEW 926 E5 1 Dual Downdraft Table NEW 155A Welding Facility Downdraft DD-5X10 PLA | 8600CFM 5'x10' 480V, 3ph, 30A Note 4, 5

27 926 E6 26 NOT USED

28 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M1 1

Dry Dock - Upper and Lower

Mock Up 105 151F High Bay Space NNSY Mock Up 10'x25'x30' Note 9 N/A N/A

120 psig compressed tool air

29 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M2 1 Carrier Shipboard Mock Up 105 151D High Bay Space NNSY Mock Up 25'x25'x25' Note 9 N/A

30 psig breathing air

120 psig compressed tool air

30 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M3 1 Portal Monitor Mock Up 105 149B Rad Staging Area NNSY Mock Up 35" X 41" X 90" 120V N/A N/A N/A

31 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M4 4 Training Room Mock Up 105

149F Training Room Mock

Up NNSY Mock Up

6'X7'X6' (5' access aisle) N/A N/A N/A

32 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M5 3 RAD Training Area Mock Up 105 149A RAD Training NNSY Mock Up 35" x 41" x 90" N/A N/A N/A

120 psig compressed tool air

33 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M6 2

RAD Briefing/Instrument Mock

Up 105

149G RAD

Briefing/Instrument Src NNSY Mock Up 19"x 16" x 24" N/A N/A N/A

34 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 105 M7 12 RAD Rolling Mock Ups 105

149D RAD Rolling Mock Up

Storage NNSY Mock Up 36" x 48" (approx) N/A N/A N/A

35 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 724 M1 1 Engine Mock Up 700 151A High Bay Space NNSY Mock Up - Kohler DC37 Step Engine 166.5X76.3"X77.7" Note 8 Note 7 Note 7

36 GFCI

NAVSEA/

NNSY NEW 724 M2 1 Generator Mock Up 700 151A High Bay Space

NNSY Mock Up - Caterpillar 3508 Diesel

Generator 173" x 73" x 87.5" See Part 6 Note 8 N/A

37 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 724 M3 1 Rigging Mock Up 700 151B High Bay Space NNSY Mock Up

16'-8"X8'-8"X 18'-

0"

38 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 724 M4 6 Crane Classroom Mock Ups 700 151A High Bay Space NNSY Mock Up

42"x24" (sit on carts)

39 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M1 1 Multipurpose Mock Up 900T 151C High Bay Space NNSY Mock Up 100' X 50'X 30'

40 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M2 4 Nuclear Pipefitter Mock UP 900T 145 RADCON Nuc Pipefitter NNSY Mock Up

6' X 3' X 9' on scissor lifts Tool air for each

41 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M3 1 Elect Repair Cabinet Mock Up 900T

143 RADCON Elect &

Lockwire NNSY Mock Up 24" X 24" X 72" 120V Freestanding

42 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M4 1 Elect Repair Drawer Mock Up 900T

143 RADCON Elect &

Lockwire NNSY Mock Up 22" X 22" X 22" 120V Tabletop see Typical Weld Booth Schematic

Deductive Bid Option See 00 22 13.00 20

CFCI

Funding

Source

New or

Move

Existing

Tag on

Furniture

Plans

Qty Name New/Code New Location Description

PHYSICAL

DIMENSIONS

(LxWxH)

WEIGHT

(lbs)

POWER

WATER/

Drain.

rqrmts

HVAC/ VENTI-

LATION

PROCESS/

UTILITIES/

WASTE

NOTES/ OTHER

SPECIAL

REQUIREMENTS

43 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M5 1 Lockwire Mock UP 900T

143 RADCON Elect &

Lockwire NNSY Mock Up 22" x 22" x 25"

44 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M6 2 SQRS Mock Up 900T 140 RADCON SQRS NNSY Mock Up 3' X 4'

45 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M7 1 SQRS Mock Up 900T 140 RADCON SQRS NNSY Mock Up 3' x 2'

46 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M8 1 SQRS Mock Up 900T 140 RADCON SQRS NNSY Mock Up 4' x 4'

47 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M9 1

Nuclear Test Mechanic Mock

Up 900T 147 RADCON Nuc Test Mech NNSY Mock Up tabletop

48 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M10 8 Training Booth Mock Ups 900T

249B RADCON Cont

Training Booths NNSY Mock Up spill containment

/walk- in (multiple sizes)

49 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M11 1 Portal Monitor Mock Up 900T 249A RADCON Staging Area NNSY Mock Up 40" X 40" X 90" Tool air for each

50 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M12 4 Primary Valve MockUps 900T

250 RADCON Prim Valve

Repair NNSY Mock Up 36" X 36" X 84" 120V

51 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M13 1 Nuclear Temp Vent Mock Up 900T

251 RADCON Nuc Temp

Vent NNSY Mock Up 7'6" X 3' X 70" 120V

52 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M14 1 Nuclear Temp Vent Hose Cart 900T

251 RADCON Nuc Temp

Vent NNSY Mock Up 80" X 36" X 38" 120V

53 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M15 10 Flange Mechanical Stations 900T

252 RADCON Flange

Mechanical NNSY Mock Up 26"X13"X28" 120V Tool air for each (10)

54 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M16 1 I Beam Insulation Mock Up 900T 142 Insulation Training NNSY Mock Up 7' X 5' X 7'-6" 120V

55 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M17 1 Small Pipe Insulation Mock Up 900T 142 Insulation Training NNSY Mock Up 7' X 5' X 7'-6" 120V

56 GFGI

NAVSEA/

NNSY

NEW, to be fabricated by NNSY 900T M18 1 Large Pipe Insulation Mock Up 900T 142 Insulation Training NNSY Mock Up 7' X 5' X 5' 120V

57 CFCI MILCON NEW 900T M19 1

Custom fabricated Shipboard

Fall Protection Mock Up 900T 151G High Bay Space see Schematic

58 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T M20 1 EPD Machine Mock Up 900T 140 RADCON SQRS NNSY Mock Up 18" x 18" 120V

59 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P1 1 Bench Lathe Prop 900T TBD Training Aid Storage Jet Belt Drive Bench lathe mock-up 40”l x 20”d x 42” h 250 lbs.

60 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P2 1 Drill Press Prop 900T TBD Training Aid Storage Grizzley Industrial table top drill press table top 148 lbs.

Deductive Bid Option See 00 22 13.00 20

CFCI

Funding

Source

New or

Move

Existing

Tag on

Furniture

Plans

Qty Name New/Code New Location Description

PHYSICAL

DIMENSIONS

(LxWxH)

WEIGHT

(lbs)

POWER

WATER/

Drain.

rqrmts

HVAC/ VENTI-

LATION

PROCESS/

UTILITIES/

WASTE

NOTES/ OTHER

SPECIAL

REQUIREMENTS

61 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P3 1 Wood Lathe Prop 900T TBD Training Aid Storage Grizzley 12”x18” tabletop wood lathe #T25920 12" x 18" tabletop 89 lbs.

62 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P4 1 HP Shaper Prop 900T TBD Training Aid Storage Grizzley ¾ HP shaper #G0510Z 24” x 24” x 42” h 167 lbs.

63 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P5 1 Combination Sander Prop 900T TBD Training Aid Storage Grizzley table top combination sander#H6020 tabletop 149 lbs.

64 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P6 1 Wet Grinder Prop 900T TBD Training Aid Storage Grizzley table top wet grinder #T10096 tabletop 42 lbs.

65 GFGI

NAVSEA/

NNSY

MOVE - To be relocated by NNSY 900T P7 1 Bandsaw Prop 900T TBD Training Aid Storage

Grizzley freestanding, 14” deluxe bandsaw

#G0555LX 28”wX 28”dX 68” h 246 lbs

GFGI

GFCI

CFCI

10. The ventilation swing arm shall have positioning sufficient to ensure that the capture hood does not interfere with welder positioning and retains the capability to reach within the appropriate capture distance (4"-6" depending on vent duct size) of any weldment installed either on the weld booth workbench or the multi-height positioner arm.

8. 120V for battery charger & control panel, 208V for jacket water heater

Government Furnished, Government Installed - Refer to Part 3, Chapter 6, Section E1040 Government Furnished Equipment

Government Furnished, Contractor Installed - Refer to Part 3, Chapter 6, Section E1040 Government Furnished Equipment

Contractor Furnished, Contractor Installed - Refer to Part 3, Chapter 6, Section E1090 Other Equipment

NOTES:

1. Ventilation design shall conform to requirements of ACGIH Industrial Ventilation Handbook section VS-35-01: Airflow: 80-100 acfm/ft2 of full open area; Duct Velocity: <2000 fpm

2. Each room shall have independent exhaust system. Multiple pieces of equipment within a room may be part of the same exhaust system, unless otherwise noted. Exhaust systems shall be pressure-independent, variable flow systems utilizing pressure-independent volume regulators. Coordinate volume regulator controls with fume hood equipment. Control room pressure negative to surrounding areas. Exhaust system and room pressure control shall be monitored and controlled by the building DDC system.

3. Ventilation design shall conform to requirements of ACGIH Industrial Ventilation Handbook section VS-90-02: Moveable capturing hoods shall be flanged, and design airflow shall be sized such that the hood shall be no further than 6" from work area. Duct Velocity: 2500 - 3000 fpm. Booth exhaust may be combined; no more than 7 booths per exhaust system.

4. Ventilation design shall conform to requirements of ACGIH Industrial Ventilation Handbook section VS-80-18: Airflow: 150-250 acfm/ ft2 of bench area. Duct Velocity: 3500 fpm minimum.

5. Exhaust system may not be combined with any other system.

6. Bid Option

7. The installation of liquid-fueled stationary internal combustion engines and gas turbines, including exhaust, fuel storage and piping, shall meet the requirements.

9. req. 2 dedicated, 120V, 20A circuits

6' Protector Stainless Steel Radioisotope Laboratory Hood, 2 Fixtures, 1 Receptacle, 115V View online: http://www.labconco.com/product/6-protector-stainless-steel-radioisotope-laboratory-hood-2-fixtures-1-re/5165

Catalog Number: 120600002

Overview

Protector Stainless Steel Radioisotope Laboratory Hoods provide protection from applications requiring the use of radiochemicals. They feature fully sealed integral work surfaces and coved interiors to facilitate decontamination.

Available in 4, 5, 6 and 8-foot widths, these benchtop hoods feature a corrosion-resistant Type 304 stainless steel interior. The one-piece liner is free of joints, cracks or crevices to prevent build-up of residue and simplify decontamination procedures.

Specifications

Weight: 580.0 lbs Weight metric: 263.1 kg Dimensions: 72.0" w x 31.7" d x 59.0" h Dimensions metric: 182.9 x 80.5 x 149.9 cm Electrical: 115 volts, 50/60 Hz Product Subcategory: Radioisotope Nominal Width: 6' Region: International, U.S. and Canada

Blower Requirements: Remote blower required Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA

45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL

Electrical Duplexes: 1 Enclosure Height: 59.0" Lighting: T8 fluorescent Service Fixtures: 2 Style: Benchtop

130_E1A

Description

Compliance

• SEFA 1-2002 (Laboratory Fume Hoods)

• NFPA 45-2000 (Fire Protection for Laboratories Using Chemicals) section 6-1 through 6-14

• ASTM E84-01 Surface Burning Characteristics of Building Materials

• ASHRAE 110-95 (Method of Testing Performance of Laboratory Fume Hoods)

• ANSI Z9.5-1993 (Laboratory Ventilation)

• UL 3101-1/61010-1

• CAN/CSA Standard C22.2 No. 1010.1

• UL 1805

Features

• By-pass airflow design

• Curved air foil allows air to sweep the work surface while Clean-Sweep™ openings pull inflow air from under the air foil.

• Glacier white, dry powder epoxy-coated steel exterior

• Seamless Type 304 stainless steel liner with integral work surface

• Black enamel-coated hardboard surface to support the integral work surface

• Tempered safety glass vertical-rising sash with frame of epoxy-coated aluminum and PVC

• Removable front and side panels and front access panels for access to plumbing and electrical wiring

• Energy-efficient T8 fluorescent lighting,

• Light switch and blower switch for 115 volt, 60 Hz operation pre-wired to a single point internal junction box

• Two pre-plumbed service fixtures with forged brass valves and chrome-plated brass serrated hose connectors, lower right side with brass tubing for gas and lower left side with copper tubing for air

• Pre-wired 115 volt electrical duplex receptacle on lower right side

• 11" OD Type 304 stainless steel exhaust connection(s)

Options

• 4', 5', 6' and 8' widths

Required Accessories

• Remote Blowers

• Ductwork

• Base cabinets

• Adjustable Height Base Stands

Optional Accessories

• Electrical Duplex Kits

• Airflow monitors

• Sash stops

• Ceiling Enclosure Kits

• Side Enclosure Kits

• Rear Finish Panel Kits

For Product Assistance

Becky Alexander Customer Service Representative

Jared Stewart Sales Representative

Labconco Corporation 8811 Prospect Avenue

Kansas City, MO 64132-2696 Phone: 816-333-8811

Powered by TCPDF (www.tcpdf.org) http://www.tcpdf.org

6' SpillStopper Work Surface, 30.0" deep

View online: http://www.labconco.com/product/6-spillstopper-work-surface-300-deep/3946

Catalog Number: 9500600

SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins. They are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume hood.

Pre-drilled holes for venting and plumbing passthroughs are provided.

Some include 6" x 3" cupsink cutouts.

Weight: 205.0 lbs Weight metric: 93.0 kg Dimensions: 72.0" w x 30.0" d x 1.25" h Dimensions metric: 182.9 x 76.2 x 3.2 cm

Applicable Products: Protector Premier Laboratory Hoods, Protector XL Laboratory Hoods Cupsink cutouts: No cupsink cutout Hood, Enclosure or Glove Box Width: 6'

Kansas City, MO 64132-2696 Phone: 816-333-8811

Powered by TCPDF (www.tcpdf.org)

130_E1B1

Protector Standard Storage Cabinet

View online: http://www.labconco.com/product/protector-standard-storage-cabinet-2/1001

Catalog Number: 9900100

Protector Standard Storage Cabinets support Labconco fume hoods and may be used for storage and venting of small laboratory instruments and mild acids and other reagents.

Weight: 135.0 lbs Weight metric: 82.0 kg Dimensions: 36.0" w x 22.0" d Dimensions metric: 91.4 x 55.9 cm Cabinet Width: 36" (91 cm)

Door(s): Dual, Manual Close Filler Panel Depth: 8.0" (20.3 cm) Maximum Base Height: 36.75" (93.3 cm) Minimum Base Height: 35.5" (90.2 cm) Storage Type: Non-chemical general storage

130_E1B

Features

Support Labconco fume hoods including Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; Protector XL Benchtop and HOPEC IV; Basic and Fiberglass 30 Hoods Durable epoxy-coated steel construction Attractive glacier white exterior complements laboratory casework and Labconco fume hoods.

Manual-closing, non-locking door(s) Include four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30".

Support loads up to 800 pounds.

Required Accessories

SpillStopper™ Work Surfaces Flat Work Surfaces

Optional Accessories

Shelf Kits Filler Panels

Kansas City, MO 64132-2696 Phone: 816-333-8811

Powered by TCPDF (www.tcpdf.org)

MetaServ™ 250 Single & Twin Grinder Polishers

Vector™ Vector LC 250 Power Heads

Solutions for Materials Preparation, Testing and AnalysisPage 11 of 134

130_E2

The MetaServ 250 family of grinder-polishers offers performance, economy and reliability for low volume preparation applications.

Transform the standard speed single or twin base to a semi-automatic system with the addition of the Vector™ LC 250 power head or purchase the MetaServ 250 with Vector power head.

• Available in single or twin base, accommodating 8in [203mm] or 10in [254mm] platens with an operating range of 50-500 rpm

• High speed twin base, with an operating range of 50-1200 rpm for manual high speed grinding applications only

• Single or central force polishing options available with the Vector and Vector LC 250 Power Heads*

• Built-in drain and bowl wash flush away debris before it can build up

• Adjustable water flow nozzle keeps specimens cool during grinding

• Compatible with the Burst Dispensing System and Stadium Seating in manual and semi-automatic modes

*Vector LC 250 Power Head, single force only

• Single and Central force operation

• Accommodates up to 6 specimens

• Control mode, force, time, rotation, water

• On/off control of the Burst

Dispensing System

• Easy-to-use control panel

• Quick access to emergency stop

• Available in single or twin base

• Twin base available in two speed ranges: 50-500rpm or 50-1200rpm

• Manual polishing standard

• Optional semi-automatic polishing with Vector or Vector LC 250 Power Heads

• Single force operation

• Economical, mechanical loading for 1-4 specimens

• On/off control of the Burst

Dispensing System

• Adjustable water flow nozzle provides cooling where needed

• Built-in drain and bowl wash minimize debris build-up

• Molded base provides long lasting corrosion and impact resistance

Semi-automatic Power Head

Semi-automatic Power Head

Versatile

Manual Power Head

Cleanability

Durable Housing

At a Glance

MetaServ™ 250 Grinder-Polisher Family

Visit our website at www.buehler.com for more information.

W

D

H

MetaServ™ 250 MetaServ 250 Twin MetaServ 250 with

Vector™ Power Head

Platen Size / Qty.

8in [203mm] 10in [254mm]

1 Platen

2 Platens

1 Platen

Controls Membrane Membrane Membrane

Preparation Style Manual, Semi-Automatic Manual, Semi-Automatic Manual, Semi-Automatic

Power Heads Available Vector LC 250 Vector LC 250* Vector Power Head

Motor 300 Watt 332 Watt

Platen Speed 50-500rpm 50-500rpm or 50-1200rpm† 50-500rpm

Base Power 85-264VAC, 50/60Hz, 1 phase

Water Supply Pressure No greater than 100psi [6.8bar]

Water Supply Flow 0.5gpm [2lpm]

Dimensions (WxDxH)

17.8 x 28.9 x 9.5in [452 x 735 x 242mm]

24.5in [662mm] H with power head

31.7 x 28.9 x 10.2in [805 x 735 x 260mm]

24.5in [662mm] H with power head

17.8 x 28.9 x 23.25in [452 x 735 x 591mm]

Weight 44 lbs [20kg] 82 lbs [37kg] with power head

119 lbs [54kg] 157 lbs [71kg] with power head

82 lbs [37kg]

Compliance CE and EC Applicable Directives

* Vector LC 250 Power Head not available for MetaSerz 250 Twin High Speed † 50-1200rpm for MetaServ 250 Twin High Speed Only

Vector LC 250 Power Head Vector Power Head

Head Speed 60rpm 60rpm

Voltage/Frequency 115/230VAC, 50/60Hz, 1 phase NA

Sample Force Single: 0-11 lbs [0-50N] Single: 0-15 lbs [0-75N] / Central: 4-60 lbs [20-300N]

Sample Sizes 1in, 1.25in, 1.5in, 25mm, 30mm, 40mm

Sample Capacity Single: 1 - 4 Single: 1-4 / Central: 3-6

Air Supply NA 55-85psi [3.8-5.8bar]

Drive Adapter Single: 60-9005 Single: 60-9005 / Central: 60-2499

MetaServ 250 - Single

Operation Base Power Head Voltage/Frequency

Manual 49-10055 n/a 85-264VAC, 50/60Hz

Semi- Automatic 49-10055 60-10059-115 Vector LC 250 115VAC, 50/60Hz

Semi-Automatic 49-10055 60-10059-230 Vector LC 250 230VAC, 50/60Hz

Semi-Automatic 49-10056 included Vector 85-264VAC, 50/60Hz

MetaServ™ 250 - Twin

Operation Base Power Head Voltage/Frequency

Manual 49-10057 n/a 85-264VAC, 50/60Hz

Semi- Automatic 49-10057 60-10059-115 115VAC, 50/60Hz

Semi-Automatic 49-10057 60-10059-230 230VAC, 50/60Hz

Manual 49-10057HS n/a 85-264VAC, 50/60Hz

The optional Burst Dispensing System can be connected to the MetaServ Grinder-Polishers for manual and semi-automatic dispensing during preparation. This product improves both productivity and consistency by dispensing suspensions at fixed intervals and configurable rates.

40-10005 Burst Dispensing Module (shown) See our Product Catalogue for more information on the Burst Dispensing System.

© 2013 BUEHLER, a division of Illinois Tool Works Inc. Printed in U.S.A. FN01453_1013

BUEHLER Worldwide Headquarters 41 Waukegan Road Lake Bluff, Illinois 60044-1699 USA P: (847) 295-6500 www.buehler.com | info@buehler.com

BUEHLER Germany info.eu@buehler.com

BUEHLER France info.fr@buehler.com

BUEHLER United Kingdom info.uk@buehler.com

BUEHLER Canada info@buehler.ca

BUEHLER Asia-Pacific info@buehler.com.hk

BUEHLER China china@buehler.com.hk

For a complete listing of consumables, visit our website at www.buehler.com or refer our Product Catalogue. Buehler continuously makes product improvements; therefore technical specifications are subject to change without notice.

Shop online at www.buehler.com. (US, DE, FR and UK only)

Accessories for MetaServ 250 Grinder-Polishers

Burst Dispensing System

40-4061 8in [203mm] Aluminum Platen 40-0500 10in [254mm] Aluminum Platen 16-2071 8in [203mm] Apex™ MagnoDisc with MagnoFix 16-2571 10in [254mm] Apex MagnoDisc with MagnoFix

30-2008 8in [203mm] Paper Holding Band 95-2825 10in [254mm] Paper Holding Band 891060 2, 3 Air Filter with regulator, complete

Specimen Holders for Vector and Vector LC 250

Part Number Style Size Capacity

60-2482 1in 6

60-2483 1.25in 6

60-2484 1.25in 3

60-2422 1.25in [32mm] 6

60-2485 1.5in 3

60-2486 30mm 6

60-2487 40mm 3

60-2409 1 x 1.25in [25.4 x 31.75mm] 4

* Refer to regional maps in footer for product availability

Central Force for Vector For use with Drive Adapters 60-2499.

Part Number Style Size Capacity

60-10060 1in 4

60-10061 1.25in 4

60-10062 1.5in 4

60-10063 25mm 4

60-10064 30mm 4

60-10065 40mm 4

Part Number Style Size Capacity

60-3001 1in 4

60-3002 1.25in 4

60-3003 1.5in 4

60-3004 25mm 4

60-3005 30mm 4

60-3006 40mm 4

60-3000 1 x 2 4

Single Force for Vector™ LC 250 Power Head Vector Power Head For use with 60-9005 Drive Adapter. For use with 60-9005 Drive Adapter.

Round/Barrel Rectangle Slides Teardrop

Careers Sitemap Global �English

Inverted Metallurgical Microscope GX51 Specifications

Optical System UIS2 Optical System

(Infinity-corrected)

Microscope

Frame

Observation Method

BF/DF/DIC/KPO*

Reflected/Transmitted Reflected/Transmitted

Illuminator BF/DF Lever Switching

Illumination System Reflected Light 100 W Halogen/100 W

Mercury/75 W Xenon

Transmitted Light 100 W Halogen

Focus Motorized /Manual Manual Revolving

Nosepiece Up/Down

Movement (Stage

Stationary Type)

Stroke 9 mm

Resolution/Fine Adjustement

Sensitivity

Fine Stroke per Rotation

0.1 mm

Revolving Nosepiece Motorized Type Sextuple for BF/DIC

Quintuple for BF/DF/DIC

Manual Type Centerable Quadruple for

BF/DIC

Sextuple for BF/DIC

Quintuple for BF/DF

Quintuple for BF/DF/DIC

Centerable Quintuple for

BF/DF/DIC

Sextuple for BF/DF/DIC

Medium Variable Magnification -

Specifications

Industrial Microscopes

GX51

Page 1 of 4GX51 - Olympus Inverted Metallurgical Microscope Solution

9/2/2017https://www.olympus-ims.com/en/microscope/gx51/

130_E3

Camera Port Front Port (Reversed

Image), Side Port (Upright

Image: option)

Stage Stroke 50(X)x50(Y)mm

Observation

Tube

Standard Field (Field Number

18)

Inverted Image

Standard Field (Field Number

20)

Inverted Image

Wide Field (Field Number 22) Inverted Image Binocular/Trinocular/Tilting

Binocular Observation

Tube

Erect Image -

Super Wide Field (Field

Number 26.5)

Inverted Image

Erect Image -

Option Transmitted Light

Polarization Observation

Unit

Dimensions 280(W)x711(D)x425(H) mm

Weight 28 kg (in Standard

Combination)

Remark *Simple Polarized Light

Observation

Industrial Microscopes

Light Microscopes

Inverted Metallurgical

Microscopes

Subscribe to

Newsletters �

Page 2 of 4GX51 - Olympus Inverted Metallurgical Microscope Solution

9/2/2017https://www.olympus-ims.com/en/microscope/gx51/

530 Commerce Park Drive Marietta, GA 30064-2719 770.528.9000 marietta-ndt.com

ULTRASONICS | X-RAY | TURNKEY SYSTEMS

PRODUCT IMAGE CLIPPED

Marietta NDT manufactured FC-320 Cabinets are designed and produced in Marietta

Georgia under ISO 9001 and AS 9100C Quality standards. Our Standard Product design meets all CFR 1020.4 radiation requirements and can provide safe x-ray space for Film, CR, and DR operations.

We o�er these cabinets in a single front drop door design or dual side door shuttle style cabinet. We have a variety of accessory items that can help meet unique individual facility safety requirements.

FC-320

Drop Door Radiographic Inspection

FC-320 Bene�ts

• Steel/ Lead/ Steel Construction

• Color: Exterior Grey, Interior white

• Lights: X-ray on, Interior Fluorescent

• Adjustable Leveling Pads

• Fork Lift Movable

• One Year Warranty on Parts and Labor

• Power Requirements: 120 VAC, 20A, 60HZ

• Tube Head Cradle

Insight is Everything

130_E4

Insight is Everything

FC-320

Drop Door Radiographic Inspection Cabinet

Dimensions, Weights & Measurements

9 Feet 3 ½ Inches Tall 4 Feet 5 ¾ Inches Wide 4 Feet 4 ½ Inches Deep

Main Door Opening - Pneumatic, Safety Interlocked Door Approximate Measurement: 29 5/8” Tall, 36 1/8 Wide

Service Door Opening 5 Feet 2” Tall 2 Feet 6” Wide

Shelf Size 2 Feet 10” Wide 3 Feet 9” Deep

Tube Lift 3 Feet to 5 Feet Adjustable FFD Motorized Adjustable X-ray and Detector Mounting

Estimated Overall Weight : 15,000lbs

Options

• Tube Height Digital Readout

• Laser Pointers

• X-ray Generators & Imaging Systems

• Dual Drop Door

530 Commerce Park Drive Marietta, GA 30064-2719 770.528.9000 marietta-ndt.com

ULTRASONICS | X-RAY | TURNKEY SYSTEMS

Two (2) 450kV X-ray Sets

Stephen Bristow Norfolk Naval Ship Yard Receiving Officer Portsmouth, VA 23709 United States

SUBMITTED BY:

Jason Dimon North Star Imaging, Inc.

763-463-5650 jdimon@4nsi.com

QUOTE NUMBER: NB005060 v1

QUOTE VALID FOR: 30 days

DATE OF QUOTE: 07/27/2017

CONFIDENTIAL: This document is intended to be confidential between the buyer and North Star Imaging, Inc. This document is not to be shared with other parties without the consent of North Star Imaging, Inc.

130_E4

COMPANY PROFILE

North Star Imaging (NSI) manufactures, sells and services state-of-the-art X-ray Imaging systems and CT equipment for industrial use. Our company also designs and develops the software applications used in our systems. NSI provides system solutions from basic low production or R&D, to high resolution/high production/high energy. Our standard range of products is extremely flexible to meet varied customer requirements.

NSI began in the field of industrial X-ray Imaging in 1986 in Minnesota. The Company built its first Digital Radiography system in 1991 and first Computed Tomography system in 2002. From 2006, NSI widened its services and added an

Inspection Services Group (ISG) offering need based consulting for anyone needing X-ray and/or computed tomography scanning. Aside from the ISG services, the company also has a Technical Service & Support team that is on call 24/7 to address immediate global customer service needs.

In 2010, the company was acquired by ITW, a global company with 51,000 employees across 56 countries. Then in 2012, North Star Imaging Europe opened in Paris (France) and also doubled the size of its facility in Minnesota.

The global demand for powerful X-ray and CT equipment that provides precise and automatic material analysis with a non-destructive view of various components is what pushes NSI to constantly raise its bar of excellence in product innovation.

The company has the widest product portfolio range in the industry today which keeps NSI way ahead of its competition. NSI offers seven (7) standard X-ray and CT/micro CT systems including the newly launched CXMM 50, an X-ray system designed specifically for 3D Metrology.

The corporate office is located in the city of Rogers, just outside Minneapolis, Minnesota. This facility has about 80 skilled employees including application specialists, mechanical engineers, software engineers, programmers, level 3 instructors and others.

NSI facilities will be opened in 2015 on the West Coast (CA) and in the United Kingdom. NSI is an ISO 9001:2008 certified company.

Submitted By - Jason Dimon - 763-463-5650 - jdimon@4nsi.com Page 2 of 4

X-ray Tube

Two (2) CF450 X-ray Sets w/NDI451 tube

· 450 kV X-ray Set

· NDI-451 metal ceramic tube head

· EN 12543 Spec 2.5mm and 5.5mm dual focal spots

· NSI MP-1 digital controller with enclosure. The MP-1 has 6 operating modes, which are Warm UP, Radiographic, Fluoroscopic, Auto Watt, and Remote Control via RS232. Up 600 stored techniques

· Industrial CF -450 high stability generators

· CF I/O box

· 2 – 10 meter high-tension cable

· OL4503 Oil to Air cooler with flow and temperature interlocks

· All associated cables, cooling lines and documentation

Installation and Training

Installation (2 Days On-Site)

NSI will perform installation with factory trained NSI personnel.