AIMD Sect J Attachment 4 - Safety Measure Calculations v1.doc

AIMD Section J N00019-11-R-0024 Attachment 4 – Safety Measure Calculations

Enclosure 4 - SAFETY CALCULATIONS

CLS PERFORMANCE WORK STATEMENT

AIMD

The Safety Measure (SM) component of the Performance Measurement Framework is defined as the quantification of Safety realized by the contractor. It is composed of measures in the following areas:

· Hazard Reports (HAZREPs)

· Mishaps Hazards are defined in accordance with OPNAVINST 3750.6R, and HAZREPs are the formal means of reporting hazards. Only HAZREPs determined to be due to deficiencies of the maintenance contractor will be factored into determination of the Safety Measure.

Mishaps are also defined in accordance with OPNAVINST 3750.6R, and mishaps are reported formally via Mishap Data Reports. Mishaps, regardless of mishap category and severity class, determined to be due to deficiencies of the maintenance contractor will be factored into determination of the Safety Measure.

Specific measures of these areas of concern which will be used in determining the Safety Measure are as follows:

HR – The HAZREP measure will be determined using the following rules:

if HRMR = 0 during the evaluation period then HR = 1, if HRMR = 1 during the evaluation period then HR = 0.75, if HRMR > 1 during the evaluation period then HR = 0

· HRMR = Number of HAZREPs determined to be due to deficiencies of the maintenance contractor.

MH – The mishap measure will be determined using the following rules:

if MHMR = 0 then MH = 1

· MHMR = Number of maintenance related mishaps per evaluation period.

The following formula is used to calculate the Safety Measure:

a. SM = 0 if

MHMR > 0

b. SM = (0.40)MH + (0.60)HR if

MHMR = 0

Calculated values shall be rounded to three digits.