MACC Solicitation - FA286020R0045.pdf

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION

CALL:

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory negotiable. (See ).

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

12b. CALENDAR DAYS

YES NO

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

STANDARD FORM 1442 (REV. 8/2014) BACK

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

FA286020R0045

Section A - Solicitation/Contract Form

Section B - Supplies or Services and Prices/Cost

Additional Information/Notes

CLAUSES AND PROVISIONS

(a) Clauses and provisions from the Federal Acquisition Regulation (FAR) and supplements thereto are incorporated in this document by reference and in full text. Those incorporated by reference have the same force and effect as if they were given in full text.

(b) Clauses and provisions in this document will be numbered in sequence, but will not necessarily appear in consecutive order.

(c) Sections K, L, and M will be physically removed by the Government from any resultant award, but will be deemed to be incorporated by reference in that award.

Item Supplies/Service Quantity Unit Unit Price Amount

MACC - Base Year - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

MACC - Post Award Conference - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract. This CLIN is to satisfy the minimum guarantee of this contract which is $5,000.

Firm Fixed Price

1.0 Lot

Option Line Item

MACC - Option Year 1 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

Option Line Item

MACC - Option Year 2 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

Option Line Item

MACC - Option Year 3 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

Option Line Item

MACC - Option Year 4 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

MACC - Option Year 5 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving

Option Line Item

(asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

Option Line Item

MACC - Option Year 6 - JBA and JBAB The MACC is a Multiple Award Indefinite Delivery/Indefinite Quantity (IDIQ) Contract including, but not limited to, the following construction disciplines /categories: Electrical, mechanical, painting, engineering/design, paving (asphaltic and concrete), flooring (tile work /carpeting), roofing, structural repair, fencing installation, HVAC, and fire suppression/protection system installation.

All work shall be accomplished in strict adherence to the contract documents and industry or regulatory standards, identified by individual Task Orders. The performance locations are Joint Base Andrews, Joint Base Anacostia Bolling, and their tenant units.

Firm Fixed Price

1.0 Lot

Section C - Description/Specifications/Statement of Work

Requirements Multiple Award Construction Contract (MACC), in support of JBA and JBAB, for Design-Build (DB) and Construction Only services based on general statements of work further defined with each individual Task Order (TO). Magnitude of the individual TOs range between $500,000 and $15,000,000. The total program value is Not-to-Exceed $700,000,000 over a seven year period as detailed within.

Section D - Packaging and Marking

Solicitation FA2860-20-R-0045 will not include and Clause or Information in Section D - Packaging and Marking

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.246-12 Inspection of Construction. 1996-08

0001 Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 302-981-7171 Email:

0002 Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance Instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 301-981-7171 Email:

Option Line Item

Inspection and Acceptance Location Both Destination

Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Email:

Telephone: 301-881-7171

Option Line Item

Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 301-981-7171 Email:

Option Line Item

Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 301-981-7171 Email:

Option Line Item

Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 301-981-7171 Email:

Option Line Item

Inspection and Acceptance Location Both Destination Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Email:

Telephone: 301-981-7171

Option Line Item

Inspection and Acceptance Location Both Destination

Instructions: Specific Inspection and Acceptance instructions will be included at the individual Task Order level.

DoDAAC: F1D326 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F1D326 316 CES CEP

AF NO MILSBILLS PROCESSES

3710 FETCHET AVE

ANDREWS AFB, MD 20762 4803

United States

OfficeCode:

Rick Wilson Telephone: 301-981-7171 Email:

Section F - Deliveries or Performance

Delivery Schedule

Period of Performance From

20 FEB 2021

To

19 FEB 2022

Delivery Schedule

Period of Performance From

20 FEB 2021

To

19 FEB 2022

Option Line Item 1001 Delivery Schedule

Period of Performance From

20 FEB 2022

To

19 FEB 2023

Option Line Item 2001 Delivery Schedule

Period of Performance From

20 FEB 2023

To

19 FEB 2024

Option Line Item 3001 Delivery Schedule

Period of Performance From

20 FEB 2024

To

19 FEB 2025

Option Line Item 4001 Delivery Schedule

Period of Performance From

20 FEB 2025

To

19 FEB 2026

Option Line Item 5001 Delivery Schedule

Period of Performance From

20 FEB 2026

To

19 FEB 2027

Option Line Item 6001 Delivery Schedule

Period of Performance From

20 FEB 2027

To

19 FEB 2028

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.242-15 Stop-Work Order. 1989-08 52.247-34 F.o.b. Destination. 1991-11

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.201-7000 Contracting Officer's Representative 1991-12 252.204-7006 Billing Instructions. 2005-10 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12 252.236-7000 Modification Proposals--Price Breakdown 1991-12

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

TBD

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC ____ Issue By DoDAAC ____ Admin DoDAAC ____ Inspect By DoDAAC ____ Ship To Code ____ Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) ____ Service Acceptor (DoDAAC) ____ Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____

THE ABOVE INFORMATION WILL BE FILLED IN AT THE TASK ORDER LEVEL

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section H - Special Contract Requirements General Information Multiple Award Construction Contract (MACC)

1. A separate Notice to Proceed (NTP) will be issued on each task order.

2. Reference Block 11: Performance periods will be negotiated on each task order.

3. Reference Block 12: Performance and Payment Bonds will be required on each individual task order that exceeds $150,000.00. The Contractor will also be required to maintain reserve Performance and Payment Bonds for projects with a combined performance magnitude of $1,000,000.00 at all times for the duration of this contract. Reserve bonds shall serve as alternate payment protection for task orders valued between $30,000.00 and $150,000.00.

4. Each task order will be funded separately.

SPECIAL CONTRACT REQUIREMENTS

H-1 BASE ACCESS

Occasionally it is necessary to require either early release of JBA and JBAB personnel, late reporting, or even total base closure when weather conditions make normal travel unsafe. When weather conditions cause one of the above situations, contractor personnel will be denied access to the base unless they have been notified that their contract service has been determined essential. For base closure or late reporting during inclement weather, listen to radio stations, watch television stations, visit the OPM website or download the OPM Alert smart phone application.

H-2 REQUIRED INSURANCE (IAW FAR 28.306(b)) Reference FAR clause 52.228-5 Insurance -- Work on a Government Installation-The Contractor shall, at its own expense, procure and thereafter maintain the following kinds of insurance with respect to performance under the contract.

a. Workmen's Compensation and Employers Liability Insurance as required by law except that if this contract is to be performed in a State which does not require or permit private insurance, then compliance with the statutory or administrative requirements in any such State will be satisfactory. The required Workmen's Compensation insurance shall extend to cover employer's liability for accidental bodily injury or death and for occupational disease with a minimum liability limit of $100,000.

b. General Liability Insurance. Bodily injury liability insurance, in the minimum limits of $500,000 per occurrence shall be required on the comprehensive form of policy.

c. Automobile Liability Insurance. This insurance shall be required on the comprehensive form of policy and shall provide bodily injury liability and property damage liability covering the operation of all automobiles used in connection with the performance of the contract. At least the minimum limits of $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage shall be required.

Before commencing work under this contract, the Contractor shall certify to the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective (1) for such period as the laws of the State in which this contract is to be performed prescribed or (2) until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

H-3 Bonds

a. Performance and Payment Bonds. The contractor will be required to furnish a Performance Bond (Standard Form 25) and a Payment Bond (Standard Form 25-A), each with good and sufficient surety or sureties, acceptable to the Government for each task order exceeding $150,000.00 within 14 calendar days after task order award.

b. Reserve Bonding Requirements. The contractor will be required to maintain reserve bonds for projects in the magnitude of $1,000,000.00 at all times for the duration of the contract. The purpose of this bonding is to expedite urgent projects in lieu of waiting for individual bonding to be acquired. It shall serve as alternate payment protection for task orders valued between $30,000.00 and $150,000.00. This reserve bonding must be provided within thirty (30) days after contract award. The contractor may, at their discretion, provide an irrevocable letter of credit (ILC) for task orders valued between $30,000.00 and $150,000.00, but shall maintain bonds in the magnitude of $1,000,000.00 for urgent projects.

Note 1: A Notice to proceed will not be issued and no work shall begin until good and sufficient surety has been received and accepted by the Contracting Officer.

NOTE 2: INDIVIDUAL SURETY CLAUSE: In order for the Contracting Officer to determine the acceptability of individuals proposed as sureties, all offerors providing bonds which are executed by individual sureties using real property as security interest are required to submit the following information in support of Standard Form 28, "Affidavit of Individual Surety"

a. A complete description of property offered, supported by title or deed, and appraisal or tax assessment.

b. A current list of all other bonds on which the individual is a surety and bonds for which the individual is requesting to be a surety.

c. Independent certification of net value of property offered.

d. Independent certification of liens or other encumbrances which exist against all property listed.

e. CPA - certified balance sheet(s) and income statement(s) with a signed opinion for each individual surety.

f. Reference 52.228-11 -- Pledges of Assets, for additional information regarding individual sureties.

H-4 RECEIPT OF PROPOSALS

Task Order Proposals will not be considered "received" until delivered to e-mail address of the Contract Specialist and Contracting Officer listed on individual task orders.

H-5 PREPARATION OF PROGRESS SCHEDULES AND REPORTS

The reports contemplated by the clause 52.236-15 -- Schedules for Construction Contracts, shall be accomplished on and in accordance with instructions pertaining to AF Form 3064, Contract Progress Schedule, and AF Form 3065, Contract Progress Report. The AF Form 3064 shall be provided to the Contracting Officer not later than 15 calendar days after issuance of the Notice to Proceed. (Mandatory when performance is 60 or more days)

H-6 MATERIAL APPROVAL SUBMITTAL

All material and articles requiring approval, as contemplated by 52.236-5 -- Materials and Workmanship Clause, shall be submitted by the contractor using a web based submittal application. The web based application is TBD and will be confirmed prior to award of the MACC. In addition, the contractor is reminded that the certification on the AF Form 3000 must be signed by an individual within the company who has authority to make the certification.

H-7 UTILITY SERVICES

The Contracting Officer has determined that Government-operated utilities are adequate and will be furnished to the contractor without charge where existing outlets are available. The contractor is responsible for installing temporary service outlets, as necessary, and charges will be made in accordance with the clause 52.236-14 -- Availability and Use of Utility Services.

Damage to Utilities

a. In the event of a contractor caused utility failure/disruption, the contractor will first make the area safe, then immediately contact the Base Civil Engineer Customer Service and Contracting Officer.

b. Repairs to contractor damaged utilities will be performed in a timely manner and at no additional cost to the Government.

H-8 AS-BUILT DRAWINGS

The contractor shall maintain one set of drawings at the work site and record all changes and any hidden or subsurface data discovered during construction. The contractor shall provide a marked by blue line copy with all changes, which transpired during the contract.

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.202-1 Definitions. 2013-11 52.203-5 Covenant Against Contingent Fees. 2014-05 52.203-6 Restrictions on Subcontractor Sales to the Government. 2006-09 52.203-7 Anti-Kickback Procedures. 2014-05 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. 2014-05 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. 2014-05

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

2007-09

52.203-12 Limitation on Payments to Influence Certain Federal Transactions. 2010-10 52.203-13 Contractor Code of Business Ethics and Conduct. 2015-10

52.203-15 Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009.

2010-06

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights.

2014-04

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

2017-01

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. 2017-01 52.204-2 Alternate II Security Requirements. - (Alternate II) 1996-08 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. 2011-05 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. 2018-10 52.204-13 System for Award Management Maintenance. 2018-10 52.204-15 Service Contract Reporting Requirements for Indefinite-Delivery Contracts. 2016-10 52.204-18 Commercial and Government Entity Code Maintenance. 2016-07

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

2018-07

52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

2015-10

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. 2018-10 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. 2015-11 52.210-1 Market Research. 2011-04 52.211-13 Time Extensions. 2000-09 52.215-2 Audit and Records-Negotiation. 2010-10 52.215-8 Order of Precedence-Uniform Contract Format. 1997-10 52.215-10 Price Reduction for Defective Certified Cost or Pricing Data. 2011-08 52.215-11 Price Reduction for Defective Certified Cost or Pricing Data-Modifications. 2011-08 52.215-12 Subcontractor Certified Cost or Pricing Data. 2010-10 52.215-15 Pension Adjustments and Asset Reversions. 2010-10 52.215-17 Waiver of Facilities Capital Cost of Money. 1997-10

52.215-18 Reversion or Adjustment of Plans for Postretirement Benefits (PRB) Other Than Pensions.

2005-07

52.215-19 Notification of Ownership Changes. 1997-10

52.215-21 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data-Modifications.

2010-10

52.216-4 Economic Price Adjustment-Labor and Material. 2017-01 52.219-6 Deviation 2020-O0008 Notice of Total Small Business Set-Aside (DEVIATION 2020-O0008) 2020-03 52.219-8 Utilization of Small Business Concerns. 2018-10 52.219-13 Notice of Set-Aside of Orders. 2020-03 52.222-1 Notice to the Government of Labor Disputes. 1997-02 52.222-3 Convict Labor. 2003-06 52.222-4 Contract Work Hours and Safety Standards -Overtime Compensation. 2018-03 52.222-6 Construction Wage Rate Requirements. 2018-08 52.222-7 Withholding of Funds. 2014-05 52.222-8 Payrolls and Basic Records. 2018-08 52.222-9 Apprentices and Trainees. 2005-07 52.222-10 Compliance with Copeland Act Requirements. 1988-02 52.222-11 Subcontracts (Labor Standards). 2014-05 52.222-12 Contract Termination-Debarment. 2014-05 52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations. 2014-05 52.222-14 Disputes Concerning Labor Standards. 1988-02 52.222-15 Certification of Eligibility. 2014-05 52.222-21 Prohibition of Segregated Facilities. 2015-04 52.222-27 Affirmative Action Compliance Requirements for Construction. 2015-04

52.222-30 Construction Wage Rate Requirements-Price Adjustment (None or Separately Specified Method).

2018-08

52.222-32 Construction Wage Rate Requirements-Price Adjustment (Actual Method). 2018-08

52.222-37 Employment Reports on Veterans. 2016-02 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. 2010-12 52.222-41 Service Contract Labor Standards. 2018-08

52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts).

2018-08

52.222-50 Combating Trafficking in Persons. 2019-01 52.222-54 Employment Eligibility Verification. 2015-10 52.222-55 Minimum Wages Under Executive Order 13658. 2015-12 52.222-62 Paid Sick Leave Under Executive Order 13706. 2017-01 52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 52.223-6 Drug-Free Workplace. 2001-05

52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners.

2016-06

52.223-15 Energy Efficiency in Energy-Consuming Products. 2020-05

52.223-17 Affirmative Procurement of EPA-designated Items in Service and Construction Contracts.

2018-08

52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. 2011-08 52.223-19 Compliance with Environmental Management Systems. 2011-05 52.223-20 Aerosols. 2016-06 52.223-21 Foams. 2016-06 52.224-3 Privacy Training. 2017-01 52.225-13 Restrictions on Certain Foreign Purchases. 2008-06 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area. 2007-11 52.227-1 Authorization and Consent. 2007-12 52.227-2 Notice and Assistance Regarding Patent and Copyright Infringement. 2007-12 52.228-2 Additional Bond Security. 1997-10 52.228-5 Insurance-Work on a Government Installation. 1997-01 52.228-11 Pledges of Assets. 2018-08 52.228-12 Prospective Subcontractor Requests for Bonds. 2014-05 52.228-14 Irrevocable Letter of Credit. 2014-11 52.228-15 Performance and Payment Bonds-Construction. 2010-10 52.229-3 Federal, State, and Local Taxes. 2013-02 52.232-8 Discounts for Prompt Payment. 2002-02 52.232-11 Extras. 1984-04 52.232-17 Interest. 2014-05 52.232-18 Availability of Funds. 1984-04 52.232-23 Assignment of Claims. 2014-05 52.232-24 Prohibition of Assignment of Claims. 2014-05 52.232-27 Prompt Payment for Construction Contracts. 2017-01 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 2018-10 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 52.233-1 Disputes. 2014-05 52.233-3 Protest after Award. 1996-08 52.233-4 Applicable Law for Breach of Contract Claim. 2004-10 52.236-2 Differing Site Conditions. 1984-04 52.236-3 Site Investigation and Conditions Affecting the Work. 1984-04 52.236-5 Material and Workmanship. 1984-04 52.236-6 Superintendence by the Contractor. 1984-04 52.236-7 Permits and Responsibilities. 1991-11 52.236-8 Other Contracts. 1984-04

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

1984-04

52.236-10 Operations and Storage Areas. 1984-04 52.236-11 Use and Possession Prior to Completion. 1984-04 52.236-12 Cleaning Up. 1984-04 52.236-13 Accident Prevention. 1991-11 52.236-13 Alternate I Accident Prevention. - (Alternate I) 1991-11 52.236-14 Availability and Use of Utility Services. 1984-04 52.236-15 Schedules for Construction Contracts. 1984-04 52.236-17 Layout of Work. 1984-04 52.236-21 Specifications and Drawings for Construction. 1997-02 52.236-26 Preconstruction Conference. 1995-02 52.242-13 Bankruptcy. 1995-07 52.242-14 Suspension of Work. 1984-04 52.243-1 Alternate I Changes-Fixed-Price. - (Alternate I) 1987-08 52.243-4 Changes. 2007-06 52.243-5 Changes and Changed Conditions. 1984-04 52.244-6 Subcontracts for Commercial Items. 2019-08 52.245-1 Government Property. 2017-01 52.245-9 Use and Charges. 2012-04 52.246-21 Warranty of Construction. 1994-03

52.246-21 Alternate I Warranty of Construction. - (Alternate I) 1994-03 52.246-23 Limitation of Liability. 1997-02 52.249-2 Termination for Convenience of the Government (Fixed-Price). 2012-04

52.249-3 Termination for Convenience of the Government (Dismantling, Demolition, or Removal of Improvements).

2012-04

52.249-4 Termination for Convenience of the Government (Services) (Short Form). 1984-04 52.249-10 Default (Fixed-Price Construction). 1984-04 52.249-10 Alternate I Default (Fixed-Price Construction). - (Alternate I) 1984-04 52.250-1 Indemnification Under Public Law85-804. 1984-04 52.251-1 Government Supply Sources. 2012-04 52.253-1 Computer Generated Forms. 1991-01

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09

252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies.

2008-12

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09

252.203-7003 Agency Office of the Inspector General. As prescribed in 203.1004(a), use the following clause:

2019-08

252.204-7000 Disclosure of Information 2016-10 252.204-7003 Control of Government Personnel Work Product. 1992-04 252.204-7004 Antiterrorism Awareness Training for Contractors. 2019-02 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. 2016-10 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. 2019-12 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 2016-05 252.205-7000 Provision of Information to Cooperative Agreement Holders 1991-12

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

2019-05

252.211-7007 Reporting of Government-Furnished Property. 2012-08

252.219-7010 Notification of Competition Limited to Eligible 8(a) Participants-Partnership Agreement.

2019-10

252.219-7011 Notification to Delay Performance. 1998-06 252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements. 2010-12 252.223-7004 Drug-Free Work Force. 1988-09 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 2014-09 252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 252.225-7001 Buy American and Balance of Payments Program. 2017-12 252.225-7002 Qualifying Country Sources as Subcontractors. 2017-12 252.225-7012 Preference for Certain Domestic Commodities. 2017-12 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. 2011-06 252.225-7048 Export-Controlled Items. 2013-06

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

2019-04

252.227-7033 Rights in Shop Drawings. 1966-04 252.232-7004 DoD Progress Payment Rates. 2014-10 252.232-7010 Levies on Contract Payments. 2006-12 252.236-7005 Airfield Safety Precautions. 1991-12 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. 2013-06 252.242-7005 Contractor Business Systems. 2012-02 252.242-7006 Accounting System Administration. 2012-02 252.243-7001 Pricing of Contract Modifications. 1991-12 252.243-7002 Requests for Equitable Adjustment. 2012-12 252.244-7000 Subcontracts for Commercial Items 2013-06 252.245-7002 Reporting Loss of Government Property. 2017-12 252.245-7002 Deviation 2020- O0004

Reporting Loss of Government Property (DEVIATION 2020-O0004) 2017-12

252.245-7003 Contractor Property Management System Administration. 2012-04 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations. 2010-10

FAR Clauses Incorporated by Full Text

52.204-21 Basic Safeguarding of Covered Contractor Information Systems. 2016-06

As prescribed in 4.1903 , insert the following clause:

BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016)

. As used in this clause-(a) Definitions means an information system that is owned or operated by a contractor that processes, stores, or Covered contractor information system transmits Federal contract information.

means information, not intended for public release, that is provided by or generated for the Government under Federal contract information a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public websites) or simple transactional information, such as necessary to process payments.

means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including Information textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems Instruction (CNSSI) 4009).

means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, Information system dissemination, or disposition of information (44 U.S.C. 3502).

means measures or controls that are prescribed to protect information systems.Safeguarding

Safeguarding requirements and procedures.(b)

The Contractor shall apply the following basic safeguarding requirements and procedures to protect covered contractor information (1) systems. Requirements and procedures for basic safeguarding of covered contractor information systems shall include, at a minimum, the following security controls:

Limit information system access to authorized users, processes acting on behalf of authorized users, or devices (including other (i) information systems).

Limit information system access to the types of transactions and functions that authorized users are permitted to execute.(ii)

Verify and control/limit connections to and use of external information systems.(iii)

Control information posted or processed on publicly accessible information systems.(iv)

Identify information system users, processes acting on behalf of users, or devices.(v)

Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational (vi) information systems.

Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.(vii)

Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized (viii) individuals.

Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.(ix)

Monitor, control, and protect organizational communications ( ., information transmitted or received by organizational information (x) i.e systems) at the external boundaries and key internal boundaries of the information systems.

Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.(xi)

Identify, report, and correct information and information system flaws in a timely manner.(xii)

Provide protection from malicious code at appropriate locations within organizational information systems.(xiii)

Update malicious code protection mechanisms when new releases are available.(xiv)

Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, (xv) or executed.

This clause does not relieve the Contractor of any other specific safeguarding requirements specified by Federal (2) Other requirements.

agencies and departments relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.

The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (c) Subcontracts.

(including subcontracts for the acquisition of commercial items, other than commercially available off-the-shelf items), in which the subcontractor may have Federal contract information residing in or transiting through its information system.

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

2019-08

As prescribed in 4.2105(b), insert the following clause:

PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (AUG 2019)

As used in this clause-(a) Definitions.

means The People's Republic of China.Covered foreign country means-Covered telecommunications equipment or services

Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such (1) entities);

For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other (2) national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);

Telecommunications or video surveillance services provided by such entities or using such equipment; or(3)

Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in (4) consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

means-Critical technology

Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms (1) Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;

Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under (2) subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled-

Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, (i) nuclear nonproliferation, or missile technology; or

For reasons relating to regional stability or surreptitious listening;(ii)

Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of (3) title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);

Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of (4) nuclear equipment and material);

Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title (5) 42 of such Code; or

Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. (6) 4817).

means any component necessary for the proper function or performance of a piece of equipment, system, or Substantial or essential component service.

Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) (b) Prohibition.

prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in Federal Acquisition Regulation 4.2104.

This clause does not prohibit contractors from providing-(c) Exceptions.

A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or(1)

Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such (2) equipment transmits or otherwise handles.

Reporting requirement. (d) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or (1) essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting

Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the

Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause(2)

Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; (i) supplier name;…