LASSO II Section J Attachments Portfolio.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

Attachment J-09 Register of Service Contract Wage Determination

Kennedy Space Center

LABORATORY SUPPORT SERVICES AND OPERATIONS

(LASSO) II

SOLICITATION

LASSO II SOLICITATION ATTACHMENT J-09 80KSC021R0038

01290 - Rental Clerk 13.5 01300 - Scheduler Maintenance 16.80 01311 - Secretary I 16.8 01312 - Secretary II 18.7 01313 - Secretary III 20.9 01320 - Service Order Dispatcher 15.2 01410 - Supply Technician 23.9 01420 - Survey Worker 16.3 01460 - Switchboard Operator/Receptionist 13.9 01531 - Travel Clerk I 14.2 01532 - Travel Clerk II 15.4 01533 - Travel Clerk III 16.5 01611 - Word Processor I 14.9 01612 - Word Processor II 16.8 01613 - Word Processor III 18.7 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 23.65 05010 - Automotive Electrician 18.1 05040 - Automotive Glass Installer 17.1 05070 - Automotive Worker 17.1 05110 - Mobile Equipment Servicer 15.5 05130 - Motor Equipment Metal Mechanic 18.8 05160 - Motor Equipment Metal Worker 17.1 05190 - Motor Vehicle Mechanic 18.8 05220 - Motor Vehicle Mechanic Helper 14.5 05250 - Motor Vehicle Upholstery Worker 16.5 05280 - Motor Vehicle Wrecker 17.1 05310 - Painter Automotive 18.04 05340 - Radiator Repair Specialist 17.1 05370 - Tire Repairer 14.5 05400 - Transmission Repair Specialist 18.8 07000 - Food Preparation And Service Occupations 07010 - Baker 12.3 07041 - Cook I 12.8 07042 - Cook II 14.7 07070 - Dishwasher 10.1 07130 - Food Service Worker 11.0 07210 - Meat Cutter 17.3 07260 - Waiter/Waitress 10.7 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.7 09040 - Furniture Handler 13.0 09080 - Furniture Refinisher 18.3 09090 - Furniture Refinisher Helper 13.9 09110 - Furniture Repairer Minor 16.18 09130 - Upholsterer 18.3 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.15 11060 - Elevator Operator 11.9 11090 - Gardener 16.6 11122 - Housekeeping Aide 11.9 11150 - Janitor 11.9 11210 - Laborer Grounds Maintenance 13.02 11240 - Maid or Houseman 11.5 11260 - Pruner 11.8 11270 - Tractor Operator 15.4 11330 - Trail Maintenance Worker 13.0 11360 - Window Cleaner 13.1 12000 - Health Occupations 12010 - Ambulance Driver 22.7

12011 - Breath Alcohol Technician 19.1 12012 - Certified Occupational Therapist Assistant 35.4 12015 - Certified Physical Therapist Assistant 32.3 12020 - Dental Assistant 19.1 12025 - Dental Hygienist 34.5 12030 - EKG Technician 20.0 12035 - Electroneurodiagnostic Technologist 20.0 12040 - Emergency Medical Technician 22.7 12071 - Licensed Practical Nurse I 17.0 12072 - Licensed Practical Nurse II 19.1 12073 - Licensed Practical Nurse III 21.2 12100 - Medical Assistant 15.0 12130 - Medical Laboratory Technician 24.8 12160 - Medical Record Clerk 16.3 12190 - Medical Record Technician 18.2 12195 - Medical Transcriptionist 17.4 12210 - Nuclear Medicine Technologist 35.1 12221 - Nursing Assistant I 11.7 12222 - Nursing Assistant II 13.2 12223 - Nursing Assistant III 14.4 12224 - Nursing Assistant IV 16.1 12235 - Optical Dispenser 24.2 12236 - Optical Technician 18.4 12250 - Pharmacy Technician 16.6 12280 - Phlebotomist 16.0 12305 - Radiologic Technologist 27.8 12311 - Registered Nurse I 22.6 12312 - Registered Nurse II 27.7 12313 - Registered Nurse II Specialist 27.73 12314 - Registered Nurse III 33.5 12315 - Registered Nurse III Anesthetist 33.55 12316 - Registered Nurse IV 40.2 12317 - Scheduler (Drug and Alcohol Testing) 27.5 12320 - Substance Abuse Treatment Counselor 19.5 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.5 13012 - Exhibits Specialist II 20.8 13013 - Exhibits Specialist III 25.4 13041 - Illustrator I 16.8 13042 - Illustrator II 20.8 13043 - Illustrator III 25.4 13047 - Librarian 23.0 13050 - Library Aide/Clerk 13.2 13054 - Library Information Technology Systems 20.8 Administrator 13058 - Library Technician 17.6 13061 - Media Specialist I 15.0 13062 - Media Specialist II 16.8 13063 - Media Specialist III 18.7 13071 - Photographer I 16.5 13072 - Photographer II 18.5 13073 - Photographer III 22.9 13074 - Photographer IV 28.0 13075 - Photographer V 33.5 13090 - Technical Order Library Clerk 16.6 13110 - Video Teleconference Technician 15.7 14000 - Information Technology Occupations 14041 - Computer Operator I 16.3 14042 - Computer Operator II 18.3 14043 - Computer Operator III 20.4

14044 - Computer Operator IV 22.6 14045 - Computer Operator V 25.1 14071 - Computer Programmer I (see 1) 23.1 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.3 14160 - Personal Computer Support Technician 22.6 14170 - System Support Specialist 26.7 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.9 15020 - Aircrew Training Devices Instructor (Rated) 34.1 15030 - Air Crew Training Devices Instructor (Pilot) 40.8 15050 - Computer Based Training Specialist / Instructor 29.9 15060 - Educational Technologist 30.8 15070 - Flight Instructor (Pilot) 40.8 15080 - Graphic Artist 20.5 15085 - Maintenance Test Pilot Fixed Jet/Prop 40.86 15086 - Maintenance Test Pilot Rotary Wing 40.86 15088 - Non-Maintenance Test/Co-Pilot 40.8 15090 - Technical Instructor 23.8 15095 - Technical Instructor/Course Developer 29.1 15110 - Test Proctor 19.2 15120 - Tutor 19.2 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 10.0 16030 - Counter Attendant 10.0 16040 - Dry Cleaner 12.2 16070 - Finisher Flatwork Machine 10.02 16090 - Presser Hand 10.02 16110 - Presser Machine Drycleaning 10.02 16130 - Presser Machine Shirts 10.02 16160 - Presser Machine Wearing Apparel Laundry 10.02 16190 - Sewing Machine Operator 13.0 16220 - Tailor 13.8 16250 - Washer Machine 10.64 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.4 19040 - Tool And Die Maker 28.9 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.6 21030 - Material Coordinator 21.8 21040 - Material Expediter 21.8 21050 - Material Handling Laborer 13.4 21071 - Order Filler 12.8 21080 - Production Line Worker (Food Processing) 17.6 21110 - Shipping Packer 14.8 21130 - Shipping/Receiving Clerk 14.8 21140 - Store Worker I 13.6 21150 - Stock Clerk 18.2 21210 - Tools And Parts Attendant 17.6 21410 - Warehouse Specialist 17.6 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.8 23019 - Aircraft Logs and Records Technician 23.4 23021 - Aircraft Mechanic I 28.2 23022 - Aircraft Mechanic II 29.8

23023 - Aircraft Mechanic III 31.4 23040 - Aircraft Mechanic Helper 20.1 23050 - Aircraft Painter 26.63 23060 - Aircraft Servicer 23.4 23070 - Aircraft Survival Flight Equipment Technician 26.6 23080 - Aircraft Worker 25.0 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.0 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.2

II

23110 - Appliance Mechanic 20.9 23120 - Bicycle Repairer 17.1 23125 - Cable Splicer 29.9 23130 - Carpenter Maintenance 19.03 23140 - Carpet Layer 19.6 23160 - Electrician Maintenance 26.74 23181 - Electronics Technician Maintenance I 28.2 23182 - Electronics Technician Maintenance II 30.0 23183 - Electronics Technician Maintenance III 31.9 23260 - Fabric Worker 18.4 23290 - Fire Alarm System Mechanic 19.2 23310 - Fire Extinguisher Repairer 17.1 23311 - Fuel Distribution System Mechanic 22.2 23312 - Fuel Distribution System Operator 17.1 23370 - General Maintenance Worker 17.6 23380 - Ground Support Equipment Mechanic 28.2 23381 - Ground Support Equipment Servicer 23.4 23382 - Ground Support Equipment Worker 25.0 23391 - Gunsmith I 17.5 23392 - Gunsmith II 20.2 23393 - Gunsmith III 22.7 23410 - Heating Ventilation And Air-Conditioning 21.12 Mechanic 23411 - Heating Ventilation And Air Contidioning 22.33 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.5 23440 - Heavy Equipment Operator 18.1 23460 - Instrument Mechanic 22.2 23465 - Laboratory/Shelter Mechanic 20.9 23470 - Laborer 13.4 23510 - Locksmith 20.9 23530 - Machinery Maintenance Mechanic 23.7 23550 - Machinist Maintenance 20.27 23580 - Maintenance Trades Helper 15.5 23591 - Metrology Technician I 22.2 23592 - Metrology Technician II 23.5 23593 - Metrology Technician III 24.7 23640 - Millwright 22.2 23710 - Office Appliance Repairer 18.2 23760 - Painter Maintenance 18.46 23790 - Pipefitter Maintenance 24.60 23810 - Plumber Maintenance 23.18 23820 - Pneudraulic Systems Mechanic 22.2 23850 - Rigger 22.2 23870 - Scale Mechanic 19.6 23890 - Sheet-Metal Worker Maintenance 23.00 23910 - Small Engine Mechanic 17.4 23931 - Telecommunications Mechanic I 24.1 23932 - Telecommunications Mechanic II 25.2 23950 - Telephone Lineman 22.2

23960 - Welder Combination Maintenance 18.80 23965 - Well Driller 20.9 23970 - Woodcraft Worker 22.2 23980 - Woodworker 17.1 24000 - Personal Needs Occupations 24550 - Case Manager 18.0 24570 - Child Care Attendant 11.6 24580 - Child Care Center Clerk 14.4 24610 - Chore Aide 11.4 24620 - Family Readiness And Support Services 18.0 Coordinator 24630 - Homemaker 18.0 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.2 25040 - Sewage Plant Operator 21.2 25070 - Stationary Engineer 22.2 25190 - Ventilation Equipment Tender 15.8 25210 - Water Treatment Plant Operator 21.2 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.7 27007 - Baggage Inspector 15.0 27008 - Corrections Officer 21.0 27010 - Court Security Officer 21.0 27030 - Detection Dog Handler 18.8 27040 - Detention Officer 21.0 27070 - Firefighter 21.1 27101 - Guard I 15.0 27102 - Guard II 18.8 27131 - Police Officer I 21.3 27132 - Police Officer II 23.7 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.1 28042 - Carnival Equipment Repairer 13.9 28043 - Carnival Worker 9.9 28210 - Gate Attendant/Gate Tender 16.7 28310 - Lifeguard 12.0 28350 - Park Attendant (Aide) 18.7 28510 - Recreation Aide/Health Facility Attendant 13.6 28515 - Recreation Specialist 23.2 28630 - Sports Official 14.9 28690 - Swimming Pool Operator 16.1 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.2 29020 - Hatch Tender 26.2 29030 - Line Handler 26.2 29041 - Stevedore I 24.9 29042 - Stevedore II 29.4 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.55 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.96 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.80 30021 - Archeological Technician I 16.1 30022 - Archeological Technician II 18.1 30023 - Archeological Technician III 22.4 30030 - Cartographic Technician 22.4 30040 - Civil Engineering Technician 26.7 30051 - Cryogenic Technician I 25.6 30052 - Cryogenic Technician II 28.2 30061 - Drafter/CAD Operator I 16.1 30062 - Drafter/CAD Operator II 18.1

30063 - Drafter/CAD Operator III 20.1 30064 - Drafter/CAD Operator IV 24.8 30081 - Engineering Technician I 16.3 30082 - Engineering Technician II 18.3 30083 - Engineering Technician III 20.5 30084 - Engineering Technician IV 25.4 30085 - Engineering Technician V 31.0 30086 - Engineering Technician VI 37.6 30090 - Environmental Technician 22.4 30095 - Evidence Control Specialist 23.1 30210 - Laboratory Technician 22.7 30221 - Latent Fingerprint Technician I 25.6 30222 - Latent Fingerprint Technician II 28.2 30240 - Mathematical Technician 24.6 30361 - Paralegal/Legal Assistant I 20.5 30362 - Paralegal/Legal Assistant II 25.4 30363 - Paralegal/Legal Assistant III 31.1 30364 - Paralegal/Legal Assistant IV 37.7 30375 - Petroleum Supply Specialist 28.2 30390 - Photo-Optics Technician 22.4 30395 - Radiation Control Technician 28.2 30461 - Technical Writer I 23.5 30462 - Technical Writer II 28.7 30463 - Technical Writer III 34.8 30491 - Unexploded Ordnance (UXO) Technician I 25.7 30492 - Unexploded Ordnance (UXO) Technician II 31.1 30493 - Unexploded Ordnance (UXO) Technician III 37.3 30494 - Unexploded (UXO) Safety Escort 25.7 30495 - Unexploded (UXO) Sweep Personnel 25.7 30501 - Weather Forecaster I 25.6 30502 - Weather Forecaster II 31.1 30620 - Weather Observer Combined Upper Air Or (see 2) 20.18 Surface Programs 30621 - Weather Observer Senior (see 2) 22.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 31.1 31020 - Bus Aide 12.7 31030 - Bus Driver 17.5 31043 - Driver Courier 15.5 31260 - Parking and Lot Attendant 11.3 31290 - Shuttle Bus Driver 14.9 31310 - Taxi Driver 14.1 31361 - Truckdriver Light 15.14 31362 - Truckdriver Medium 16.30 31363 - Truckdriver Heavy 20.60 31364 - Truckdriver Tractor-Trailer 20.60 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.2 99030 - Cashier 10.9 99050 - Desk Clerk 12.0 99095 - Embalmer 25.3 99130 - Flight Follower 25.7 99251 - Laboratory Animal Caretaker I 13.9 99252 - Laboratory Animal Caretaker II 15.0 99260 - Marketing Analyst 28.4 99310 - Mortician 25.3 99410 - Pest Controller 17.1 99510 - Photofinishing Worker 13.5 99710 - Recycling Laborer 20.2 99711 - Recycling Specialist 23.9

99730 - Refuse Collector 18.3 99810 - Sales Clerk 12.1 99820 - School Crossing Guard 12.1 99830 - Survey Party Chief 23.7 99831 - Surveying Aide 15.7 99832 - Surveying Technician 21.5 99840 - Vending Machine Attendant 19.8 99841 - Vending Machine Repairer 24.5 99842 - Vending Machine Repairer Helper 19.8

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.60 per hour up to 40 hours per week or $184.00 per week or $797.33 per month

HEALTH & WELFARE EO 13706: $4.23 per hour up to 40 hours per week or $169.20 per week or $733.20 per month*

*This rate is to be used only when compensating employees for performance on an SCA covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for an paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years 4 weeks after 15 years and 5 weeks after 20 years.

Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rat not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the surve data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtim (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the term of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CF 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Ac and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations ar included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employee performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a repor of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (Se 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

LASSO II SOLICITATION ATTACHMENT J-10 80KSC021R0038

Kennedy Space Center

Attachment J-10 Instructions for Contractor Third-Party Work

80KSC021R0038 Attachment J-13 LASSO II Solicitation Instructions for 3rd Party Work

Informational Instructions Regarding the Process for Accomplishing

Contractor 3rd-Party Work (C3PW) on the Kennedy Space Center

(Version 3.14.16)

Purpose

The purpose of this instruction is to inform the contractor regarding the process that must be followed if the contractor wishes to perform C3PW and where contractor personnel performing the C3PW are resident on the Kennedy Space Center (KSC). C3PWis defined as work performed by the contractor on KSC and paid for via any agreement other than this contract, another NASA prime contract, or a NASA subcontract (at any tier).

Background

C3PW performed by the contractor and its subcontractors on KSC will utilize or benefit from

Government resources and services, and most likely will also involve use of Government

Property (GP) identified in this contract. The contractor’s workforce’s mere presence on KSC benefits from the installation’s resources (housing, roads, grounds, utilities, communications, emergency services, equipment, installation management and administrative support, etc.), the costs of which are paid by the Government, but which would otherwise be a part of the contractor’s costs of doing business if located offsite. These benefits are considered “special benefits to an identifiable recipient above and beyond those which accrue to the public at large” and others in the commercial market place would have to pay for such costs of doing business.

NASA policy requires that, when such benefits are existent in a circumstance where a contractor is performing C3PW, a charge shall be imposed to recover the full cost for the service, goods, or resource provided. In such circumstances, an agreement independent of this contract must be executed between the contractor and NASA KSC under which all the costs of such Government resources, as may be utilized, or benefit a particular instance of C3PW, are defined and the contractor agrees to pay, in addition to other applicable conditions and requirements. This agreement will be in the form of a Reimbursable Space Act Agreement (RSAA). RSAA’s are entirely independent of this contract. The requirements as to the data required to enter into such agreements, the terms of the agreements, issues related to the administration of the agreements, and resolution of all issues related thereto shall be addressed with the Contracting Officer’s

Representative (COR), as applicable, responsible for entering into and administering the RSAA.

Use of GP Identified in the Contract

GP identified in the lists in the contract shall be used only for performance of the NASA contract unless approval for other use is provided by the Contracting Officer. The conditions for such use are specified by the Contracting Officer with each approval. The Contracting Officer’s approval is usually provided in a letter replying to a specific contractor request. However, under this contract, for C3PW that will require an RSAA and where the work will utilize GP identified in the lists in the contract, NASA will determine if use fees will apply. If it is determined that use fees apply, then approval for use of the specified GP will be provided by the Contracting Officer in each RSAA Annex, the applicable use fees will be specified therein, and the RSAA Annex will constitute the establishment of use fees pursuant to the contract’s Use and Charges clause.

80KSC021R0038 Attachment J-13 LASSO II Solicitation Instructions for 3rd Party Work

Use of All Other Government Resources

Before the contractor performs any instance of C3PW on KSC, the contractor shall ascertain the need for Government resources, enter into an RSAA for any such Government resources that will be utilized or benefit each instance of C3PW, and comply with the requirements specified therein. If the work to be performed outside this contract involves work under another federal agency’s prime contract, including a subcontract thereto, the contractor shall coordinate with the

Contracting Officer or COR on this contract to identify the applicable documentation requirements, and shall not assume an RSAA is or is not required. In such instances, regardless of whether or not an RSAA would be required, the contractor must obtain the Contracting

Officer’s approval for use of GP when performing as a prime or subcontract under any other

Government contract(s).

Point of Contact for C3PWand RSAAs

The point of contact regarding C3PW and entering into an RSAA is the COR. If the C3PW is performed as a subcontractor (at any tier) to a cost-type NASA prime contract, an RSAA is not required, but use of GP must be approved by the Contracting Officer. In this circumstance, a request for rent-free use should be sent to the Contracting Officer.

Information Regarding Subcontract Work Under NASA Prime or Subcontracts

Subcontracts Under Cost-type NASA Prime Contracts and Subcontracts At Any Tier In

An Unbroken Cost-type Chain

Subcontracts in this circumstance are not considered to be C3PW and no fees or charges for use of NASA resources will apply. However, approval for use of Government Furnished Property

(GFP) must be obtained from the Contracting Officer prior to entering into such subcontracts.

Subcontracts Under Fixed Price (FP) NASA Prime Contracts Or A FP Subcontract At Any

Tier

Subcontracts in this circumstance are not considered to be C3PW as defined above, since the work is for NASA. However, it is unlikely that upper-tier FP contractors obtained approval for rent-free use of KSC resources by anticipated KSC onsite subcontractors as a condition of their FP contracts and assured such authority was specified therein. If such approval was not obtained for a specific subcontract with a KSC onsite contractor, then that onsite subcontractor shall follow the C3PW process to obtain approval to perform the subcontract on KSC, and C3PW fees or charges will be applied. In other words, subcontracts under a FP NASA prime at any tier will be subject to the

C3PW process and pricing, unless the FP NASA prime contract or upper tier FP subcontract was based upon and includes explicit authorization for rent free use of GP and/or KSC facilities for performance of the instant subcontract with a KSC onsite contractor.

LASSO II SOLICITATION ATTACHEMNT J-11 80KSC021R0038

ATTACHMENT J-11

SAFETY AND HEALTH PLAN

LASSO II SOLICITATION ATTACHMENT J-12 80KSC021R0038

ATTACHMENT J-12

GLOSSARY AND LIST OF ACRONYMS

80KSC021R0038

LASSO II Solicitation

Attachment J-12 Glossary and List of Acronyms

Term/Phrase Description

3RD PARTY SERVICES

Services subcontracted to a third party. For example, 3rd party calibration services are sometimes required for equipment if the calibration capability does not exist on-site at KSC.

This term should not be confused with Contractor 3rd Party Work.

ACCEPTANCE

The act of an authorized representative of the Government by which the Government, for itself or as an agent of another, assumes ownership of existing identified supplies tendered or approves specific services rendered as partial or complete performance of the contract.

ACCEPTANCE DATA

PACKAGE

The specific data in a single package which contains information pertinent to acceptance, and provides a verified status, including the as-built configuration (software or hardware) to the using organization. The ADP is prepared as part of the hardware or software acceptance/delivery criteria and maintained throughout the hardware or software life cycle after government acceptance, including processing; testing; launch on-orbit and post-landing processing; and maintenance, modification, and refurbishment activities.

ACCESS CONTROL Limiting access to hardware, equipment, information or operations for the purposes of maintaining one or more of the following: safety, quality, configuration and item integrity

ACCESS PRIVILEGES Capability to utilize electronic data systems.

ACCREDITATION

The official management decision given by a senior agency official to authorize operation of an information system and to explicitly accept the risk to agency operations (including mission, functions, image, or reputation), agency assets, or individuals, based on the implementation of an agreed-upon set of criteria.

AD HOC QUERY An unplanned, customized, real-time data inquiry AGENCY (uppercase 'A') National Aeronautics and Space Administration

ANOMALY

An unexpected event, hardware or software damage, a departure from past experience, established procedures or performance, or a deviation of system, subsystem, hardware or software performance outside certified design/performance specification limits.

ASSOCIATE CONTRACTOR

AGREEMENT

A documented mutual understanding between two or more contractors that enables support from one to the other or working together to meet a common objective and requiring no Government involvement.

AVAILABILITY The probability that an item is in an operable and committable state when called for at an unknown (random) time.

BASE LOE HOURS The level of effort (LOE) hours for all contract years that are established in the RFP and intended to be awarded at Contract Start.

BASELINE

The defined and approved end-item configuration that is documented by drawings, specifications, and/or other technical documents. A reference for program and project planning and a point of departure for change control.

BENCHSTOCK Low-cost, repetitively used consumption type supplies, and repair parts, established at or near points of consumption/use to ensure continuous and uninterrupted operations.

BI-DIRECTIONAL DIGITAL

DATA SHARING

The transfer of information in electronic form between systems without the need for conversion.

BIOLOGICAL HAZARD, BIO-

HAZARD

Biological substances that pose a threat to the health of living organisms, primarily that of humans. This can include medical waste or samples of a microorganism, virus or toxin (from a biological source) that can impact human health. The term and its associated symbol used as a warning so those potentially exposed to the substance will know to take precautions.

BIO-SAFETY LEVEL

The United States' Centers for Disease Control and Prevention (CDC) categorizes various diseases in levels of biohazard, Level 1 being minimum risk and Level 4 being extreme risk.

Laboratories and other facilities are categorized as BSL (Bio-safety Level) 1-4.

CAPITALIZED PROPERTY

(Government)

Individual items of Property, Plant, and Equipment (PP&E) that have an acquisition cost of $5,000 or more, or have an estimated useful life of two years or more, and are not intended for sale in the ordinary course of operations, and are acquired or constructed with the intention of being used or available for use.

CARGO Cargo includes Portable Equipment, Payloads and Cargo (PEPC), ISS hardware or Utilization experiments

CENTER (uppercase 'C') Kennedy Space Center

GLOSSARY

CERTIFICATION

The formal written act whereby a responsible official attests to the satisfactory accomplishment of specified activities and authorizes the affected hardware/software, procedures, facilities, and/or personnel for specified usage.

CLOSE CALL

A mishap resulting in no personal injury or illness, personal injury or illness requiring only first aid, and/or minor damage (of less than $1,000) but with potential for causing a more serious mishap or negative mission impact. (Reference NPR 8621.1)

CLOSED-LOOP PROCESS

A method of tracking requirements, from development through implementation and verification, to ensure satisfaction and reporting of the entire set of requirements for any given operation.

CLOSEOUT

The process of inspecting and securing hardware, usually flight hardware, to ensure no foreign material, damage or out-of-configuration condition exists prior to covering an area in preparation for testing or flight.

COMMAND MONITORING

AND DATA SYSTEM A system used to monitor and control the set points of equipment and log data.

COMMERCIAL-OFF-THE-

SHELF SOFTWARE Software that is commercially available and maintained by a vendor.

COMPATIBILITY

(Electromagnetic)

The ability of two or more electronic systems to operate in their intended environment without their performance being adversely affected by electromagnetic fields.

COMPLIANCE The act or process of satisfying requirements.

COMPONENT

A part, device, structure, or combination, usually self-contained, that performs a distinctive function in the operations of the overall equipment; e.g., cryogenic pump, filter assembly, power supply, or transmitter.

COMPOSITE

OVERWRAPPED PRESSURE

VESSEL

A vessel consisting of a thin, non-structural liner wrapped with a structural fiber composite, designed to hold fluid under pressure.

CONFIGURATION CONTROL The process for documenting a baseline and any subsequent changes.

CONFIGURATION

MANAGEMENT

A process that establishes and maintains consistency of a product's attributes with its requirements and product configuration information throughout the product's life cycle.

CONFIGURATION

MANAGEMENT DATA

SYSTEM

A computer data system for maintaining the design configuration and change tracking for ground support facilities, systems, and equipment end-items.

CONSISTENT WITH The contractor has flexibility to develop and apply an approach, but the approach must meet the intent of the reference document.

CONSTRAINT

Any technical or operational limiting factor that would prohibit performance of an activity, invalidate a portion of a work authorization document (sequence or step), or could cause personal injury or equipment damage if not resolved satisfactorily before the start of the work sequence or step.

CONSTRUCTION OF

FACILITIES

NASA's capital investment program for facility projects with estimated cost of greater than $1,000,000 per project. CoF projects are approved by NASA Headquarters and require Congressional approval.

CONTINGENCY

A potential off-nominal operational condition that require actions (e.g., preplanned troubleshooting, hardware safing, launch scrub or recycle, or crew evacuation). Also, a mishap, mission failure, incident, or high-visibility close call that causes or may cause a major impact to spaceflight operations or prevents accomplishment of a primary mission objective.

CRITICAL

The categorization based on the worst case potential effect of failure (loss of function or inadvertent operation), that could result in loss of life, loss of vehicle, or damage to a vehicle systems.

CRITICAL ITEM Any article, material or equipment which if defective can cause loss of life, loss of vehicle, or result in a hazardous or unsafe conditions or make a system non-functional.

CRITICAL ITEMS LIST A listing comprised of critical items identified as a result of performing the Failure Modes and Effects Analysis.

CRITICAL SKILLS A specific ability that is required for the safe execution or performance of a unique task, requiring specialized training and certification.

DAMAGE ASSESSMENT and

RECOVERY TEAM

A team of personnel to replace the Ride-Out Team and continue the recovery effort after a tropical storm or hurricane. The team performs tasks necessary to restore the infrastructure, perform damage assessment, sustain the recovery effort, and safe hazardous situations.

DATA DELIVERY IN-PLACE

An IT-specific term referring to the capability to provide access to data in the contractor's native system(s). It does not refer to data specifically identified as a contract deliverable in the PWS, including those items identified in Appendix 1.

DOCUMENT RELEASE

AUTHORIZATION

A process to release engineering documentation into a central repository in accordance with KNPR 8830.1 and other Center processes.

DOCUMENTATION

Information and its supporting medium; e.g., records, specifications, drawings, reports, standards and work documents. The medium may be paper, photography, digital files, optical discs, magnetic, electronic storage or a combination.

DOCUMENTED The condition of being recorded in written or electronic form.

e533 FLAT FILE A format specific machine readable electronic file of NASA Form 533 reportable data (See DRs 1-2.5 and 1-2.6)

ELECTRONIC INFORMATION Any data and information, except for limited-rights data or restricted software that is processed, managed, accessed or stored on an IT system in the performance of the contract.

EQUIPMENT

A tangible asset that is functionally complete for its intended purpose, durable, nonexpendable. Equipment is not intended for sale, and does not ordinarily lose its identity or become a component part of another article when put into use.

EXCESS A classification assigned to government property for which there is no requirement for future use. Also a process for property disposal

EXPENDABLES Property that may be consumed in use or loses its identity in use and may be dropped from stock record accounts when it is issued or used.

EXPERIMENT/ SCIENCE

PAYLOAD

A collection of equipment (hardware, software, specimens, etc.) and associated processes that are used to achieve specific scientific, technological, or commercial objectives. The scientific research and development components being flown on a particular mission, within or on a payload.

FAILURE ANALYSIS The effort of physical inspections, test (destructive or nondestructive), and/or analytical processes required to determine the failure modes and causes.

FAILURE MODES AND

EFFECTS ANALYSIS

The analysis of the potential failure modes in a system to determine effects on system operation, personnel safety, and flight hardware; and to classify each failure mode according to severity.

FLEX LOE HOURS The level of effort (LOE) hours for all contract years that may be added (up to a maximum) during contract implementation.

GENERAL PURPOSE

VEHICLES

Any vehicles required beyond what the Government provides. Examples include transportation for the purpose of personnel, equipment, and materials movement such as sedans, light trucks, trailers, and tankers not specifically designed for application at the installation.

GOVERNMENT (lowercase 'g') Any government entity except NASA Kennedy Space Center.

GOVERNMENT (uppercase 'G') NASA at Kennedy Space Center.

GOVERNMENT FISCAL

YEAR

The US Government accounting year for appropriations which is the 12 month period starting October 1st and ending September 30th.

GOVERNMENT PROPERTY

All property owned or leased by the Government. Government property includes both Government-furnished property and contractor-acquired property. This includes installation-accountable and contractor-accountable property as pursuant to NFS 1852.245-71 and FAR 52.245-1, respectively.

GOVERNMENT-FURNISHED

PROPERTY

Property in the possession of, or directly acquired by, the Government and subsequently made available to the contractor.

GOVERNMENT-FURNISHED

SERVICES

Services directly acquired by the Government and subsequently made available to the contractor.

GOVERNMENT-INDUSTRY

DATA EXCHANGE

PROGRAM

A cooperative data exchange among Government and industry participants for sharing and use of engineering and failure data. GIDEP provides a means to exchange a variety of data during the acquisition process and life cycle of systems and equipment that can be utilized to improve reliability and reduce the cost of ownership. Includes the use of GIDEP ALERT and GIDEP SAFE-ALERT Reports.

GOVERNMENT-LED

Any operation or activity where the Government performs as 'task leader' and a significant portion of the work, including procedure development, is performed by Government personnel.

A task leader is responsible for integrating, coordinating, and directing team members in the accomplishment of a task.

GROUND SYSTEMS Systems used to process or test flight hardware during ground processing, including unique facility systems, ground support equipment, and flight hardware special test equipment.

HAZARD The presence of a potential risk situation which may result in injury, loss of life, hardware damage, loss of system, or loss of mission.

HAZARDOUS OPERATION Any operation involving materials or equipment that has a high potential to result in loss of life, serious injury to personnel, or damage to systems, equipment or facilities.

HAZARDOUS WASTES Any waste or combination of wastes that requires special management in waste handling, processing, and disposal for the protection of human health or the environment.

HIGH PRESSURE GAS

SERVICING

High pressure gas servicing refers to filling of pressure vessels to a pressure greater than 3,000 psi.

HIGHLY-SPECIALIZED

INFORMATION

TECHNOLOGY

Highly-specialized IT is a part of, internal to, or embedded in a mission platform.

Representative examples of highly-specialized IT include: avionics software, real-time control systems, onboard processors, spacecraft instrumentation software, human physiology monitoring systems, ground support environment, experiment simulators, Launch Control System and launch cameras.

HIGH-VISIBILITY CLOSE

CALLS

Those particular mishaps or close calls, regardless of the amount of property damage or personnel injury, that the senior NASA management judges to possess a high degree of programmatic impact or public, media, or political interest including, but not limited to, mishaps and close calls that impact flight hardware, flight software, or completion of critical mission milestones.

HYPERGOLIC PROPELLANT

(or HYPERGOL)

Certain rocket fuels and oxidizers that ignite spontaneously when the two components come in contact without an external ignition source. Certain fuels can also be a monopropellant, utilizing a stationary catalyst.

IN ACCORDANCE WITH The contractor shall comply with all aspects (requirements, guidelines, specifications, etc.) of the associated compliance document.

INDEFINITE-DELIVERY/

INDEFINITE-QUANTITY

An indefinite-delivery contract type, also known as a task-order contract, used to acquire services/supplies when the exact times and/or exact quantities of future requirements/deliveries are not known at the time of contract award. A type of indefinite-delivery contract that provides for an indefinite quantity, within stated limits, of supplies or services during a fixed period, and is used to acquire supplies or services when the exact times or exact quantities of future deliveries are not known at the time of contract award.

IN-SITU In place.

INSTITUTION KSC organizations (Government or contractor), other than TOSC, providing support services and infrastructure (Government-Furnished Services).

INTERNATIONAL SPACE

STATION RESEARCH

Project level funding for a subcategory of small payloads, experiments and hardware developed by Ames Research Center, Glen Research Center, Marshall Space Flight Center and KSC.

IT RESOURCES Any hardware or software or interconnected system or subsystem of equipment that is used to process, manage access or store electronic information.

KENNEDY DATA CENTER A central facility that contains a number of computers that host IT applications. Typically, this type of facility has redundant power, air conditioning, and network connections.

LEGACY SYSTEMS Systems inherited from previous Programs.

LIFE CYCLE Generic term covering all phases of acquisition, operation, and support of an item, beginning with the concept definition and continuing through disposal of the item.

MAINTAIN (Documentation) The process of ensuring that a document is configuration-controlled and current.

MAINTAIN/ MAINTENANCE

(Systems and Equipment)

The recurring work required to preserve systems, structures, GSE, and collateral equipment in a condition that they may be used for their designated purpose over an intended service life.

MAINTAINABILITY

The measure of the ability of an item to be retained in, or restored to, a specified condition when maintenance is performed. A design and operating characteristic that permits hardware to be serviced, inspected, and repaired with a minimum expenditure of maintenance resources.