Attachment_L-07_Logistics_Sample_Final.pdf
PDF 148 KB Posted
- Attached to
- Instrumentation Range Support Program Federal contract opportunity
- Solicitation number
- FA2521-18-R-0024
About this file
This document contains a sample logistics attachment and related federal contract opportunity notice. The logistics attachment provides examples of government equipment, materials, component remanufacturing, fabrication, and transportation that could be required under the contract. Item descriptions range from test and measurement equipment to electronics components to mechanical parts. The contract opportunity is a pre-solicitation notice for instrumentation range support services. The notice seeks information from interested parties to identify a contractor to provide logistics sustainment support for instrumentation tracking systems across 26 test ranges for the Department of Defense, Department of Energy, NASA, and six foreign governments. Services include management of government-owned stock, stock acquisition, component repair, fabrication, on-site overhauls, and emergency engineering support. The opportunity is a re-competition of an existing contract held at Patrick Air Force Base in Florida. Responses were due by June 29, 2018.
Attachment L-07 Logistics Sample
View the file
Other files for this federal contract opportunity
Show all 50
Instrumentation Range Support Program has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA2521-19-R-A007
(REF FA2521-18-R-0024)
Attachment L-07
Logistics Sample - includes; Gov't Equipment, Material, Remanufacture & Fabrication, and Transportation Samples Note: This sample is used only for Technical Evaluation. Does not apply to pricing in L-11, Cost Workbook.
TEST AND SPECIALIZED EQUIPMENT SAMPLES - NON RANGE SPECIFIC
TEST AND SPECIALIZED EQUIPMENT Items Under $2000 Manufacturer NSN or P/N Model Number CALIPER, DIAL Starrett NSN: 5210002293051 120
SPRAYER HIGH PRESS MI-T-TM P/N: 4940 CW10002ME10
COUPLER, DIRECTIONAL HP NSN: 5895004882911 798C
GENERATOR, FUNCTION Agilent NSN: 6625014207926 33120A
TEST AND SPECIALIZED EQUIPMENT Items Over $2000 Manufacturer NSN or P/N Model Number
ANALYZER, LOGIC, HP NSN: 6625012784469 1650A
Sweep Generator, Agilent NSN: 6625015697669 E8257N Power Meter HP NSN: 6625000067638 432A-02 Vector Voltmeter HP NSN: 6625015477353 8508A
FA2521-13-R-0008
Attachment L-07 Logistics Sample
Logistics Sample - includes; Gov't Equipment, Material, Remanufacture & Fabrication, and Transportation Samples
MATERIAL ACQUISITION Items Under $35K NSN or P/N Transformer for radar transmitter P/N 481010-1 Time Code Generator P/N 9000AN Time Code Generator Circuit Card P/N TRPO-VME-X-50L Pulse Transformer 826454 HV Load Assembly P/N 8005343-10 Digital/Syncro Converter P/N HSCT-14-H-3 BR-1001 Oscillator S/N 07-312-014 BR-1001-OSC MXCORE-UD Expandable DVI-D 16X16 Matrix Switcher MXC-UD16X16S BR-1001 signal cable, 75 m without reel 35010-07B FPS-16 Antenna Radome 5001036-1 Motor Gearhead 110V BT1708G2 Transmitter Pulse Modulator Tubes 4PR1000A T/R Limiter VDC-1064 Pulse Generator 5000805-10 Motor w/24VDC Failsafe Brake GMB5570-3300471-2A-2-1872 Quad Mode 2 Channel Encoder/Decoder VS901-AIED-GEP CCA Linear Power Supply 8002235-10 Slip Ring Installation Kit 108709-1 Power Supply 648W 24V 27A HSW600-24/HD 6-Channel High Voltage Card 2 MS/S 1-GN610-2 Oscilloscope TDS3054C DC Power Supply Quad Bench 30V/6V 72-6905 Servo Amplifier Model BX 15A 20 PRM 60647-1 Functional Converter/upconverter 602265 EOS Lens Mount Option VRI-MNT-MIRO-EOS-OPT Filter Assembly 8472049-2 Voltage Controlled Amplifier VGC-2BA-6020 Pressure Switch 6607-7-32 Membrane Dryer Assembly 8004160-10 Brushless Servo and Motor Set 3KW 304469-01
MATERIAL ACQUISITION Items Over $35K NSN or P/N Electron Tube for radar transmitter P/N SFD-313-B Receiver Set P/N ARM5459N01X-TS4 Eight Channel Video GPS/IRIG HD-SDI 6055C-8H5111 10 GHz Doppler radar head 10000-11 Receiver Exciter Kit 1073-32301-100 Inertial Navigation System LN-251 Radio 10Base-T Link 23575 IF Receiver/Demodulator PCR616SD Demodulator, 2U Quad Channel DM200-4 Antenna Pedestal AP-700YU Circuit Card Assembly 903-5G4EJ04-51 Tube TWT VTC5765A2 Electron Tube 4CW100000E Wideband Recorder DRS8300XR-3.6TB-8A8D Handheld Spectrum Analyzer MS2724C Load Bank Custom Portable 110KW LOADBANK110 2U Dual Channel Tracking Receiver RT200A-2
Logistics Sample
Logistics Sample - includes; Gov't Equipment, Material, Remanufacture & Fabrication, and Transportation Samples
Component Remanufacture Items Under $35K - Range Specific (CLIN 0005)
Preliminary Information COMPONENT NAME SYSTEM NSN or PN
DESCRIPTION OF
PROBLEM ASSUMPTIONS
A requisition was submitted to the depot.
Contractor checked replacement was available and shipped to the range as the range was shipping the non-operational subsystem back to the depot. Pulse Generator Solid State
MPS-25/FPS-
16 P/N: 5000805-10
The Pulse Generator's output was too high causing the radar to experience an overcurrent condition.
Item is a standard FPS-16/MPS-25 Solid State Pulse Generator that supports the .25, .50 and 1 microsecond pulse widths.
Contractor determined a short within the A4 Logic Board.
A requisition was submitted to the depot.
Contractor prepped a card with the Range's required firmware and shipped to the Range to get the system back to an operational status as the range was shipping the non-operational subsystem back to the depot. Radar Signal Processor (RSP) Digital CPU
Any system that has a Radar Signal Processor
(RSP)
P/N: 8005181-001A Revision B
The errors for an angle channel were excessive and reduced the ability for the radar to maintain an active track. The Range contacted the IRSP contractor which assisted in troubleshooting prior to determining that the card lost programming.
The RSP Digital CPU Board loss programming. The Firmware was reprogrammed.
A requisition was submitted to the depot.
Contractor checked but no replacement item available and determined best value to send to OEM vendor for repair. Anritsu Signal Generator
Rotr 6 boresite P/N: MG3692B
No output, No front panel display, Pulse unstable
Depot verified problem and recommended logistics manager to issue purchase repair to OEM vendor. OEM vendor determined output amplifier, front display, and driver pulse circuit were defective and replaced.
A requisition was submitted to the depot.
Contractor checked but no replacement item available and determined best value to send to OEM vendor for repair. MiteQ Synthesizer
Rotr 3 RF receiver
P/N: MFS 8.9-9.5-
1K-200P
Frequency will only tune between 9.35 and 9.55ghz
Depot verified problem and recommended logistics manager to issue purchase repair to OEM vendor. The OEM vendor determined tuning circuit was defective and replaced.
A requisition was submitted to the depot.
Contractor checked but no replacement item available. Range sent in defective item for repair and return. Telemetry Antenna Feed
Laurel MT Telemetry 12ft P/N: 3001580-12
No receiver antenna gain, spin motor noisy
After evaluation it was determined that the LNA's P/N 300412-03 and the spin motor belt were defective and replaced.
A requisition was submitted to the depot.
Contractor checked replacement was available and shipped to the range as the range was shipping the non-operational subsystem back to the depot. 26V Power Supply AN/FPS-16 P/N PP-1826
Power supply voltage fluctuating
Assumption after evaluation of power supply it was determined that the voltage regulator was defective and needed replaced.
Logistics Sample
A requisition was submitted to the depot.
Contractor checked replacement was available and shipped to the range as the range was shipping the non-operational reparable back to the depot. TRANSFORMER RIR-716 P/N: 481010-1 variable transformer would not raise or lower voltage
Assumption after evaluation motor needed replaced
Component Remanufacture Items Over $35K - Range Specific (CLIN 0006)
A requisition was submitted to the depot.
Contractor checked but no replacement item was available. Range sent in defective item for repair and return. Wendon Slip ring Rotr 6 P/N: W146-100
Transmitter shutdown and no power out and the pedestal is erratic.
Assumption contractor checked with OEM and determined repair would take 6 months and decided best value was to repair in-house. Determined the high voltage rings and motor drive rings were shorted. Slip ring would require complete rebuild.
A requisition was submitted to the depot along with the reparable item for evaluation for repair. RPM 2510 Radar Pedestal Rotr 6 P/N: PG-2510
Evaluation of gear box determined damage to bull gear and bearings
Assumption after evaluation it was determined bull gear needed repaired and both elevation gear box main bearing need replaced.
A requisition was submitted to the depot along with the reparable item for evaluation for repair. Perkins generator remote power
Parrot Telemetry Remote power P/N: Perkins 1204
Customer ran engine without oil
Assumption after evaluation engine requires rebuilding generator bearings and regulator need replaced. Repair all EPA subsystems, along with reconnect to generator package test for 8 hrs.
under load bank 100KW
Fabrication Item Under $35K
Preliminary Information COMPONENT NAME SYSTEM NSN or PN
DESCRIPTION OF
PROBLEM ASSUMPTIONS
A requisition was submitted to the depot.
Contractor checked but no replacement item available and item would have to be fabricated. Pedestal Side Maintenance Stand Assembly
RIR-980
Radar P/N: 8006721-10
This FPS-16 Radar pedestal has been modified to the RIR- 980 specifications and the existing side pedestal maintenance stand will no longer fit.
Assumption is the side maintenance stand will have to be completely refabricated to fit the pedestal.
Fabrication Item Over $35K
Preliminary Information COMPONENT NAME SYSTEM NSN or PN
DESCRIPTION OF
PROBLEM ASSUMPTIONS
A requisition was submitted to the depot along with the reparable item for evaluation for repair. Azimuth gear assembly
AN/FPS-16 or RIR-980 P/N: 820813-501 Gear assembly noisy
Assumption bull gear needs replaced and is obsolete therefore needs to be fabricated.
| Test Equipment |
| Material |
| R-F |
File details come from the government source that posted it. Updated .